BIOS Policies for Hyper-V and Windows 2012
Hello,
Can someone please post the details and configurations regarding the recommended boot policies for the following:
1) Hyper-V (no SRIOV)
2) Bare-bones Windows 2012
Or a document from Cisco/MS.
Thanks
This is all I could find on TechNet:
http://technet.microsoft.com/en-us/library/hh831410.aspx#BKMK_simpleauth
AzMan is deprecated, but appears to still function the same for Hyper-V 2012.
Simplified authorization
The Hyper-V Administrators group is introduced and is implemented as a local security group.
What value does this change add?
This group can reduce the number of users that belong to the local Administrators group while providing users with access to Hyper-V.
What works differently?
The Hyper-V Administrators group is a new local security group. Add users to this group instead of the local Administrators group to provide them with access to Hyper-V. Members of the Hyper-V Administrators have complete and unrestricted access to
all features of Hyper-V.
Similar Messages
-
SCM update for Windows 8.1 and Windows 2012 R2
Hi,
When are we likely to get an update to SCM for Windows 8.1 and Windows 2012 R2?Hi
you must add these lines in ZTIGpoPack.wsf (for MDT) and LocalGPO.wsf (for LocalGPO), and for MDT 2013, copy ZTIGpopack to Deploymentshrare\Scripts
sOSVersion = oEnvironment.Item("OSCurrentVersion")
If (Left(sOSVersion,3) = "6.3") and oEnvironment.Item("IsServerOS") then
sOS = "WS2012R2"
oLogging.CreateEntry "Using Windows Server 2012 R2 GPO Pack", LogTypeInfo
ElseIf (Left(sOSVersion,3) = "6.3") and Not(oEnvironment.Item("IsServerOS")) then
sOS = "Win81"
oLogging.CreateEntry "Using Windows 8.1 GPO Pack", LogTypeInfo
Regards
Thanks for this, but you also need to update the GPOPack.wsf in (each relevant) template folder of the Deployment Share like this:
If(Left(strOpVer,3) = "6.3") and (strProductType <> "1") then
strOS = "WS12R2"
ElseIf(Left(strOpVer,3) = "6.3") and (strProductType = "1") then
strOS = "Win81"
ElseIf(Left(strOpVer,3) = "6.2") and (strProductType <> "1") then
strOS = "WS12"
ElseIf(Left(strOpVer,3) = "6.2") and (strProductType = "1") then
strOS = "Win8"
As ZTIApplyGPOPack calls GPOPack.wsf.
(Which is what I think Scorpio92 probably meant when you said to edit LocalGPO.wsf...) -
I want to deployment virtual machine by Hyper-V with windows 2012 server
I want to deployment virtual machine by Hyper-V with windows 2012 server. So I need step by step guide line with screenshot and video link.
Thanks,
QamrulHi Qamrul,
Additionally here is the link for hyper-v getting started guide (server2008 ) :
http://technet.microsoft.com/en-us/library/cc732470(v=ws.10).aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I have several B200M2's with Intel Xeon x5670's and M81KR's that I'm installing Hyper-V on. Anybody have recommendations on boot policies for Hyper-V? I've got the two obvious ones of Execute Disabled and Virtualization Technology enabled, but was wondering if there were any specific ones that could improve / degrade performance that I should enable / disable?
ThanksThose are the only two I've heard of modifying for Hyper-V. Good write up here explaining those two common settings.
http://blogs.technet.com/b/iftekhar/archive/2010/08/09/enable-hardware-settings-in-bios-to-run-hyper-v.aspx
I've anyone else has any tried & tested recommendations, would welcome them.
Regards,
Robert -
What's New for Hyper-V on Windows 10
What's New for Hyper-V on Windows 10This topic explains the new and changed functionality in Hyper-V on Windows 10.Windows PowerShell DirectThere is a now an easy and reliable way to run Windows PowerShell commands inside a virtual machine from the host operating system. There are no network or firewall requirements or special configuration. It works regardless of your remote management configuration. To use it, you must run Windows 10 or Windows Server Technical Preview on the host and the virtual machine guest operating system.To create a PowerShell Direct session, use one of the following commands:Enter-PSSession -VMName VMNameInvoke-Command -VMName VMName -ScriptBlock { commands }Today, Hyper-V administrators rely on two categories of tools for connecting to a virtual machine on their Hyper-V host:Remote management tools such as...
This topic first appeared in the Spiceworks CommunityWe just released the Universal Windows appdevelopment tools for writing Windows 10 apps in Visual Studio 2015. Itis an exciting release: you can now use the latest .NET technology to build Universal Windows Platform("UWP") apps that run on every Windows device - the phone in yourpocket, the tablet or laptop in your bag, the PC on your desk, the Xbox consolein your living room, and all the new devices that are being added to theWindows family like HoloLens,Surface Hub,and IoT devices like the RaspberryPi 2.Installingthe UWP ToolsYou can install the free CommunityEdition, which install the UWP tools by default. If you need theProfessional or Enterprise edition, you can download them from VisualStudio.com.During setup, choose 'Custom' to install the Tools for Universal Windows Apps.If you already haveVisual Studio 2015, here's two ways to...
-
I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
ThanksYou are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC. -
Preparation for installing bootcamp and windows 7, and in the absence of a DVD drive
I am not sure that I submitted this with the right boxes ticked, so i am re submitting it!
In preparation for installing bootcamp and windows 7, and in the absence of a DVD drive on my MacBook Air, before starting, can I partition my external drive (for use with my Mac) to have an ISO image file location for Windows downloads?
CyfromayoThe Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/
The Boot Camp Discussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp -
Simple MP games for OS X and Windows
hello all,
I am having trouble finding simple multiplayer games that have versions both for OS X and Windows XP.
Have PC laptop and ibook, both with WiFi, and would like to play games with my girlfriend. That's why simple games as she doesnt like those Ghost Recon stuff etc. but freeware/shareware ones.
Has anyone managed to find such games?
Thnx
TomHi, Thomas.
When looking for new applications, including games, I recommend searching MacUpdate or Version Tracker. The user-submitted reviews accompanying the listings can be helpful in sorting the wheat from the chaff.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
False Duplicate ip address error reported on our windows 2008 and windows 2012 servers
we use windows 2008 and windows 2012 servers our company. my access switches are cisco catalyst 3560.
A sample of a show version command from one of our access switches is as shown below.
SW_01#show version
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 15.0(1)SE2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 22-Dec-11 00:16 by prod_rel_team
ROM: Bootstrap program is C3560E boot loader
BOOTLDR: C3560E Boot Loader (C3560X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)
SW_01 uptime is 2 weeks, 5 days, 16 hours, 15 minutes
System returned to ROM by power-on
System restarted at 17:31:47 UTC Fri Nov 14 2014
System image file is "flash:/c3560e-universalk9-mz.150-1.SE2/c3560e-universalk9-mz.150-1.SE2.bin"
I will be grateful if any one can help with some solution.
Thank youCan you post your switch config?
How many switches do you have? Presumably you have more than one, this one is connected to others, and those others have servers and clients?
Try doing a 'show arp' on the switch and comparing the IPs and MACs to your windows server. Do it a few times as it may change as each device using the IP sends packets. -
Hi,
Am I reading the absence of response on "preparation for installing bootcamp and windows 7", correctly?,
There is a number of BOOTCAMP problems? which have no successful outcome yet?Pete
I think that I should have said, Am I reading into the absense of response correctly, (after failed attempts to get a response) on the BOOTCAMP preparation issue.
there is no Link that I can find solutons on, just a number of questions in the MORE LIKE THIS frame.
Cy -
My part for Lenovos PCs and Windows 7 are better together :) S-Series
Hi ,
my part for Lenovos PCs and Windows 7 are better together
Feel free to look at this...If you have one of the small Lenovo machines
or want to buy one in the future u are not alone
Windows 7 Driver
sincerely KalvinKlein
Want more ? For further information to get the most of your S-Class machine
Lenovo Energymanagement
Backup
Windows 7 Driver
Windows 7 Install
Clean XP Install
XP Startup
Small WebCam Guide
Lenovo Easy Capture
Resolution > 1024 x 576 / 600 Works with XP Only For Windows 7 Alternate driver section
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1Hi ,
my part for Lenovos PCs and Windows 7 are better together
Feel free to look at this...If you have one of the small Lenovo machines
or want to buy one in the future u are not alone
Windows 7 Driver
sincerely KalvinKlein
Want more ? For further information to get the most of your S-Class machine
Lenovo Energymanagement
Backup
Windows 7 Driver
Windows 7 Install
Clean XP Install
XP Startup
Small WebCam Guide
Lenovo Easy Capture
Resolution > 1024 x 576 / 600 Works with XP Only For Windows 7 Alternate driver section
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1 -
Mac Mini freezes at startup for both mac and windows. Any Ideas?
Mac Mini freezes at startup for both mac and windows. Any Ideas?
Thanks for getting back so quickly. But, it worked. I did what you said and now it works doing a normal boot to in both Windows and Mac. I wonder what went wrong, as both operating systems didn't boot (I tried numerous times).
Anyway, thanks. -
Microsoft Windows 8 and Microsoft Windows 2012 server are now supported platforms for ColdFusion 10. The new Windows installers are available for download to all retail and licensing customers as well on the trials download page.
The ColdFusion Builder 2.0.1 installers have also been updated to support Windows 8. The existing MAC OS X installer for ColdFusion Builder 2.0.1 has also been certified to now support MAC OS X 10.8.
Refer this technote for more details about the support.@Adam @CarlV
>what's the version number when you dump the server scope?
ColdFusion Server - Evaluation 10,0,8,284032
OK I see, the I button reports differently to Settings Summary.
About ColdFusion »
System Information
Server Details
Server Product ColdFusion
Version 10,0,8,284032
Tomcat Version 7.0.23.0
Edition Enterprise (Trial)
Serial Number
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Server Settings > Settings Summary
System Information
Server Details
Server Product ColdFusion
Version ColdFusion 10,284032
Edition Enterprise (Trial)
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Adobe Driver Version 4.1 (Build 0001)
Regards Carl M. -
S7-392 issue with Hyper-V and Windows 10
Hi, I upgraded my S7-392 to Windows 10, and as soon as I enable Hyper-V in Windows 10 and reboot, the screen gets stuck at the boot logo. The progress ring is spinning and nothing happens after that. I can login in safe mode and disable the Hyper-V, and the system boots normally. I tried this many times. Everytime I enable Hyper-V, I am unable to boot into windows again (until I disable Hyper-V). I also performed a clean install of Windows 10 pro on my S7-392, and the same problem persists. Any solution to this. This is really urgent and important. This is my primary development machine, and I need to run Windows Phone Emulators in Visual Studio. Thanks and appreciate quick help. Naweed
found this:http://mou.me.uk/2012/08/27/windows-wont-boot-after-activating-hyper-v-in-windows-8/ yes it's for windows 8 but...can be a good suggestion, so if you didn't already installed updated Intel chipset drivers, give it a try:http://global-download.acer.com/GDFiles/Driver/Chipset/Chipset_Intel_10.1.1.8_W10x64_A.zip?acerid=635730682896833407&Step1=ULTRA-THIN&Step2=ASPIRE&Step3=ASPIRE%20S7-392&OS=10M1&LC=en&BC=ACER&SC=PA_6
-
Slow printing on windows 2008 std, R2 and windows 2012
Hi All,
I have a print server which is configured on windows 2008 R2. We are experiencing slow printing when printing directly from the server or from a client through the server. Small sized files prints fast, anything which has image takes a long time. All the
printers in our organization are Xerox Colorqube 9303. When installed the driver directly on to windows 7 32 bit PC, it prints without any delay. Also, when prints from the server a 2 MB file becomes 15 MB or more while sending. We have tried PCL6 and PS drivers.
To replicate it, i have installed a windows 2012 server ended up with the same result. Installed windows 2008 standard 32 bit with SP2 and the result remains same. Also tried it on windows 8, 64 bit without any luck. So effectively, it works fine only when
directly installed on a windows 7 PC. I have disabled all three: disabling TCP Chimney Offload, RSS, Receive Window Auto-Tuning .
After shooting the print, if you observe the printer properties, it sends data at a very low rate which results a 10 MB documents prints take around 10 minutes. At the same time, file copying from the server to and fro is working normally. All these servers
are directly connected to the cisco 6509 core switch. All the above tests were performed on the same physical switch. The server and clients are on the same network (subnet).
Have anybody come across to a similar issue. Any useful suggestions would deeply appreciated.
Thanks,
Prince MathewHi Prince Mathew,
Based on your description, this issue seems that it’s related to this specific model printer (Xerox
colorqube 9303). Please install the latest version of the driver and the firmware from Xerox website, and then check if this issue still exists.
If it still persists, please clear Printer Spooler Files and enable the Spooler Service again.
For details, please refer to.
1. Click Start, run "Services.msc" (without the quotation marks).
2. In Services list, please double click "Printer Spooler". Then click
Stop, and then click OK.
3. Please locate to: "%WINDIR%\system32\spool\printers", delete all files in this folder.
4. Click Start, run "Services.msc" (without the quotation marks). In Services list, double click
"Printer Spooler". Click on Start. In the Startup Type list, make sure that "Automatic" is selected and click OK.
Then check if this issue can be solved.
Hope this helps.
Best regards,
Justin Gu
Maybe you are looking for
-
Creating a simple Template for multiple images
Hello, I work for an online company, and we deal with displaying multiple images on our site. I've been just cropping sets and just droping them in a file and organizing them that way, but I was wondering if there is a faster way of doing this in Ph
-
How do i create "Save As" option to file menu in Numbers version 2.3 (554). I have done this previously but cant remember how its done. My OS is 10.9.3
-
Is it possible to get a refund on apps?
i recently bought an app is it possible for me to get a redund on that app?
-
Dynamic Package Loading/Importing
Hi, I'm developing an open framework for network admission control / network access protection which bases on independent modules handling different procedures like authentification, accounting and so on. Right now I dynamically load my modules into
-
Apple id lost. Cannot get Access to it. Started with a mail from apple id saying that apple id and password were changed. Did not sent such a request myself. Since then no acces to apple id, not even via forgot my id site. It says that my apple id an