BIOS PROBLEM after updating bios with liveupdate

i need help. my pc was doing fine until i updated the bios and drivers.
now it can't even boot to bios. can't see or do anything .
tried to repair my self by some doing some research,
resetting the cmos and removing the battery but no luck until now.
my situation is similar to this video.
hope someone could help me out.

Quote from: ghost.u94 on 13-June-15, 18:41:14
solved- it was the dimm 3 and 4 which got errors.
not using dual channel now. only using DIMM1,2 but at least it boots up.
Then your board is most likely defective. Reseat cpu and see if pins in the socket are bent. Else it might be the slots or their wiring.

Similar Messages

HT6147 Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem?

Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'

Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

HELP! Problem after updating BIOS of my Lenovo ideapad S10-3S

I'm hoping somebody will help me out of this nightmare. Cause i'm searching and searching across the net for an answer for this the whole day and i didn't find any accurate solutions for this.
Well to start, i just updated my laptop's BIOS two days ago because i just saw on lenovo's website that there is an update file for the BIOS and I rapidly DL it and installed as per instruction, it was running fine after that but i just noticed that the system start up and even shutdown takes centuries to finish. Then i turned it on sleep having the screen facedown to the keyboard, and noticeably the 4 indicator lights are still lighted up for approximately 5mins before the laptop totally turned to sleep mode. Then I turned it on at the evening and voila! It is not booting up to the log in screen, it just gives me a background wallpaper for the log in screen without the avatar box and password in put box. After the BIOS screen loads, it offers me two options:
(1) Launch Startup Repair [recommended as it says]
(2) Start windows normally
I tried both but still having the same result. And one option that i tried is to reformat the laptop instead because onekey recovery is also not a dependable solution. But lo and behold!!! It also stuck into a part where it says "starting up the setup".
I really don't know what to do now!!! Please Lenovo team help me! I'm kinda smash the screen here! Its just that BIOS update is the Major update in my laptop after 4yrs of purchase. Help!

Hi buddy,
This stop code means you are using a wrong SATA controller driver. For XP installation you have to integrate the SATA driver before you can install XP. There are a lot of threads about this problem here in forum.
For Intel chipset you have to download Intel Storage Manager from official Toshiba website and follow the instructions here to reinstall Windows with correct SATA drivers:
http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm
Alternative follow the instructions posted by peterk_1. Setting IDE mode instead AHCI in BIOS will also help :)

Z77MA G45 problem after updating Bios to V1.9

Hi, recently I updated the bios for my motherboard to V1.9, and after that I keep having some problems. Firstly my board now won't start again after I have done changes in the BIOS unless I unplug the 24 pin power connector from the PSU and plug it in again.
Also now my PC will randomly crash saying my graphic driver is giving me a problem. Initially I thought it was my graphic card, but it still persists, even after updating the graphic drivers, and even changing cards. Heck, I even tried both nVidia and ATI, and both will crash the board randomly.
Any suggestions? like downgrading the Bios?
Thank you

>>Clear CMOS<< and retry. If no help follow >>Posting Guide<< and add required infos. What bios did you use before?

Problem after updating Bios. Now the leds only flash and computer rebbots after a few seconds.

Hello.
After upgrading bios on my Elitebook 8440P to ver F20 the computer starts and reboots contiunisly. aprox 5sek for a cycle.

Hello.
After upgrading bios on my Elitebook 8440P to ver F20 the computer starts and reboots contiunisly. aprox 5sek for a cycle.

M5400 - Black screen after updating BIOS

As the title says, I've got this unwanted black screen after updating BIOS with update utility from here http://support.lenovo.com/us/en/downloads/ds037429
What I've tried :
- power / battery out, pressing power button several times for short / long and longer time
- BIOS battery out for about half an hour
- wincrisis with USB bootable stick and BIOS extracted from BIOS update utility from support.lenovo
- different combinations of keys such as : FN + B / F / R +/- win key
What should I do next except finding a hammer ?

Hey,
I am having the same problem, I was updating my bios.. followed all directions which is necessary to update them.
And then when it was almost ready it said "Bios update is not responding" so I waited... and waited because I did not want to abort it but then Vista aborted it for me.
Well at first it did not seem to be a problem but then I noticed that I could not click anything (was still in windows @ that time did not reboot yet) then I wanted to reboot but nothing worked.. Pressing off button for a time to shut down did not work.. So eventually power was out. And it shut down.
So I hooked it up again but nothing happened. Pressing the "on" button made it start.. The DVD-drive loaded for a second but... that is it just a black screen :S
Going to bring it back to the shop tomorrow.
Suxors

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Black screen after updating bios

My tablet turned black screen and couldn't do anything after updating bios provided by official hp page. I know that there is a way to enter into bios recovery, but my tablet doesn't have keyboard. Please provide me the solution.

Hey,
I am having the same problem, I was updating my bios.. followed all directions which is necessary to update them.
And then when it was almost ready it said "Bios update is not responding" so I waited... and waited because I did not want to abort it but then Vista aborted it for me.
Well at first it did not seem to be a problem but then I noticed that I could not click anything (was still in windows @ that time did not reboot yet) then I wanted to reboot but nothing worked.. Pressing off button for a time to shut down did not work.. So eventually power was out. And it shut down.
So I hooked it up again but nothing happened. Pressing the "on" button made it start.. The DVD-drive loaded for a second but... that is it just a black screen :S
Going to bring it back to the shop tomorrow.
Suxors

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

I have 4s with 16GB storage capacity using IOS 7.1.2.
Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
Kindly resolve the issue as soon as possible
Ashish
[email protected]

Did you already try to set it up as a new device, as explained in this article?
iOS: How to back up your data and set up your device as a new device

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?

I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

Cpufrequtils problem after update

Hello!
I've a problem after update my system with pacman -Syu.
When system loads cpufreq i've this problem:
cpufreq-set: error while loading shared libraries: libsysfs.so.1: cannot open shared object file: No such file or directory
I try uninstall the cpufrequtils package and reinstall it but doesn't works
How can i fix it?
thanks.

raskolnikov wrote:
No need of cpufrequtils :
$ cat /etc/rc.local
#!/bin/sh
echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
That's ok. And of course powernow-k7 in MODULES array of rc.conf
Sure, that's pretty much what cpufrequtils do, however, they a) don't spawn a shell process and b) allow you to configure sudo to handle user-based changes. It's just a nice wrapper for that.
raskolnikov wrote:BTW the last update of this (cpufrequtils) package has overwriten my /etc/conf.d/cpufreq file, is this a normal comportement ? This file was not in NoUpgrade as if I remeber correctly, NoUpgrade was deprecated with last pacman package...
Errm, blame me - that file should be backed up. Thankfully, it's not a giant config file.

I have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

i have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

Hi all
Like to share that my AV Adapter problem is solved ... brought it to Apple Service Center as a last resort after the new iOS v5.1 did not solve mine like some others have theirs solved.
In fact, the Apple Service Center tried my AV Adapter and find that it does not work with their iphone and ipad too and flagged for a replacement.
Just this week collected the replacement and tested that the replaced adapter works !
So this "unsupported device" error msg could also be due to faulty adapter .... although it is unbelievable that a "simple" wired connector could so easily breakdown after 1 time use ! I never did believe that it can be broken so easily as we hardly used it after the first testing with our TV on HDMI.
Closing this chapter of mine finally.

BIOS PROBLEM after updating bios with liveupdate

Similar Messages

Maybe you are looking for