BIOS questions

I did also post this to tech support but when I enter the BIOS, I see under Boot Options #'s 1 to 13. They are:
1 UEFI HD WD
2 CD/DVD
3 USB HD
4 USB CD/DVD
5 USB Key
6 UEFI Network
7 USB HD
8 USB CD/DVD
9 Hard Disk Wd
10 Cd/DVD/ATAPI
11 USB Key
12 USB...

Quote from: s133893 on Yesterday at 23:08:45... Regarding Fix 1, there are another option aside from Killer Bandwith Control, called QoS Packet Scheduler - I dont know what it is, but since it got a Q in it im figurin...

Similar Messages

Pegatron IPMTB-TK motherboard version 1.04 and BIOS question?

Hi,
I bought a refurbished HP Pavilion Elite m9650f, Win 7 on 04-21-2010
and it too has suffered from the crashes, freezes and multiple BSOD
that many people have been complaining about. I have the Pegatron
IPMTB-TK TRUCKEE version 1.04 motherboard.
HP calls it TRUCKEE-UL8E.
Am I looking to replace it with version 1.04 E01 or version 1.05E?
(With much reading on the web about my m9650f problems,
I finally have it maybe 90% stable after replacing the hard drive,
upgrading to BIOS ver 5.29 and replacing all the RAM.)
I know there is a class action suit including the m9650f pending.
http://www.hpelitedesktopsettlement.com/
Will I be able to request a repair for my HP computer?
When will HP let people request a repair?
Also, I currently have BIOS ver. 5.29 and notice that there is a ver. 6.10
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-88852-1&cc=us&dlc=en&lc=en
BIOS ver 6.10 improves system support for Intel Core i7-980X Extreme Edition processors which is what ver 5.29 says it does.
BIOS ver 6.10 also installs HP Vision Diagnostic tool which I don't know anything about.
I don't plan on installing an Intel Core i7-980X Extreme Edition processor.
Should I upgrade to BIOS ver 6.10 or just leave well enough alone?
Thank you for your time.
This question was solved.
View Solution.

Hi Dashby,
My motherboard is 1.04E01 and it has been very stable. I have not heard or seen anyone with 1.05.
You can put PCI cards other than x16 in the PCI-E x16 slot such as x1 or x4 cards.
Typically what happens if another video were to be install in the second PCI-E x16 is the total 16 lanes of bandwidth would be split between the two slots. You can't run SLI or CrossFire on the truckee motherboard so in my opinion a second video card is a waste. Just use a BIG video card if needed.
You can use PC Wizard and look under Mainboard PCI Express to gain information about the PCI-E slots and the speed that they are running when a card is installed.
The Asus U3S6 expansion card is an interesting piece of technology. hmmmm I wonder if the bios would support a SATA 3 boot device?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

VGA Bios questions...

My VGA card is MSI FX5600-TD256.
Here are my questions:
1)Which is the latest Bios version for my card? My current version is 4.31.20.39.00. Is there a newer one? Searching through the web I found another version including this text in the read me file:
Quote
MSI GeForce FX BIOS
Name : GeForce FX 5600 BIOS
Version : 4.31.20.69.00 Ultra : No
2)Is it worth updating the bios? (I have restart problems probably caused by graphics card...)
3)Which is the proccess I have to follow to update it? (Just copy the .rom file in a disk and boot from that disk??)
4)Why in MSI site there are no VGA Bios files?
5)How do I back up my current VGA bios version?
Thanks in advance...

If MSI live Update finds no BIOS upgrade then there is no BIOS upgrade available. Even if there is one available, I don't recommend updating VGA BIOS unless there is a known documented issue relating to your problem. As far as I know there is no issue currently. I have not come across this issue in these forums either.
I don't have any answers to your restart problem since you did not provide any details of this restart problem. I cannot guarantee I would even if you did, but do so anyway.
I never update VGA BIOS's so I can't help you on backing up your current VGA BIOS. Someone else will have to step in for that.
The MSI site doesn't archive VGA BIOS files for the public. MSI only updates the original VGA BIOS from nVidia in circumstances such as when they decide to use a different RAM package than specified from nVidia spec. Oftentimes I see users reporting that MSI Live Update hosed their VGA BIOS after an update and in a few circumstances I have been able to request the original BIOS file.
Again, it's not worth updating the VGA BIOS as they get it right the first time and they hardly ever deviate from the original nVidia BIOS unless a certain RAM package is used for say an OEM version of the card or a performance version where they may use a faster package etc.
I recommend looking elsewhere for your restart problem.

P67A GD55 Rev B - Upgrade Bios Question

To be honest, this post supposed to be a private message to Svet, but turned out a newbie like me who just joining the forum is not allowed to send PM...so apology if this questions are being asked so many times already:
Dear svet,
Really need your help in clarifying something, to make it short here are my questions:
First here are my PC Specifications:
MSI P67A-GD55 rev B
Corsair Vengeance 2x4GB XMP Enabled
PSU Corsair X750W
Intel Sandy Bridge i5 2500k
OS Windows 7 x64
1. I have upgraded my GD55 rev B bios to the latest bios available here: msi.com/product/mb/P67A-GD55--B3-.html#/?div=BIOS
which foolishy I didn't read the warn that it will not work proeperly for Sandy Bridge
2. The bios update/flash was a success, now I have the ver II click bios, completely different with the first version. With this bios I managed to OC to my previous OC speed (4.2GHz in OC Setting by changing it into 42 multiplier and set the Vcore to 1.35)
3. The reason that I updated my bios in the first time was I often experience 0x50 error while gaming certain games, and I thought upgrading bios is one of the solutions for it (after trying to change my RAM, changing my GPU, and my PSU to no avail)
4. Then I stumble to this post of yours: https://forum-en.msi.com/index.php?topic=164135.0
with some fix in the 434 version states like this: "05.Fix system reset on 0x55 issue when use Sandy Bridge G440 CPU and install two 4G memory."
I am completely not sure whether this is related to my 0x50 BSOD or not, but really hoping that it is.
So my question is, should I upgrade/downgrade to your first post BIOS? (E7681IMS.434) or should I upgrade/downgrade to the latest beta 439 Bios (E7681IMSv439.rar) as the fix in 434 are included in 439?)
Thank you so much in advance for any help...
Regards,

Quote from: Froggy Gremlin on 09-April-13, 15:26:46
While waiting for Svet to respond, I will tell you that BSOD 050 is not enough DRAM V. being applied. It's rather a shame you didn't open a thread in the regular part of the forum, or the OC section of the forum asking for assistance 'before' flashing an Ivy support UEFI/BIOS.
That CPU is most likely capable of OC'ing to 42X easily on Auto CPU voltage while maintaining all the power saving features. VDroop set to Low or 100% depending on the available settings.
What is X.M.P. setting the DRAM V. at? If 1.50v's, to solve your BSOD, probably would have just required raising the DRAM V. to about 1.575v's or maybe even less manually. Rather than using X.M.P., the DRAM Frequency setting could have been changed manually to 1600.
Yes, all newer final or Beta versions will have previous release improvements incorporated.
Thank you for the reply...forget to delete the "dear Svet" part as it was copied from once private message intended
To be honest, I see myself rather as a silent reader than an active poster...so I would really try to avoid posting due to English isn't my first language....if that even make sense...
I think I have read quite a lot of 0x50 BSOD (CTD errors to be exact) in other forums to...have tried what people had posted as solutions for them...and still to no avail, hence my foolish and rushed attempt in flashing the bios...please do mind that the current bios is quite stable in my opinion, despite the same BSOD (CTD) in the certain game I have mentioned in my first post...
I have followed OC guide and benchmark in other forum which show each of its poster their OC settings and result (specifically i5 2500k series), and I have tried around 1 week to safely say that my unfortunate chip can only handly a stable 24/7 4.2GHz in that volt...i'm so lucky
and for XMP volt, I have no idea to be honest, I just enable it in the bios, will really look at it later on...
tl'dr thank you so much for the new insight of how to solve the 0x50! really appreciate it....If i can remember correctly, I have tried to use the default DRAM setting (without using XMP enabled) and still got the 0x50 CTD....but trying your suggestion is still a worth a try...will try this when I get home...thank you!

865ps neo2 pfs another bios question, just to be realy sure.

hi all,
maybe it's me but after reading several posts i guess it's not.
i have the above mentioned mainboard (6728 rev. 2) and when trying to find a suitable bios i stumble on the "bios version 3.0 cannot be used on 6728 board" warning.
since they say that with almost all 3.* biosses i figured i can't use that range of biosses only to find out that my current bios is 3.4 whitch seems non existant somehow?.
to shorten all this a bit, bios 3.A IS the right bios for me right?
what was a litle wierd as wel is, i treid the live update prog from msi and it says i have the latest bios.
last "question", who in gods name is responsible for such logic defying work in the download section, sack the dude/gall
tnx in advance y'all.

tnx guy(s)
well, i think (!) my cpu readings are a bit high for starters (not sure tho) and well, it would be nice if it saw my 250 gig hd as well, besides, if there ain't nothing to tweak (read, possibility to bugger up ), why did i bother getting me this board in the first place
had me a msi oem board before and it was working fine but wanted one where i could fidle with a bit so here goes nothing.
i promise not to post again if i mess up the flash ok?
ps: the only way to have a second revision of a board would be to have a first one so that they share the same model number, i get.
what i don't get is, why don't they refere to it as such...

990FXA-GD65 & 970A-g45 Bios Question-HPC

I have 2 systems with pretty close to the same bios Feature. My question is a quick one, and I hope a simple one?
What is HPC-I know it stands for High Performance Computing-I know that it has to do with the throttling, under load.
What is the exact reason for this? Why was it added to the bios? Is this just for FX cpu's
Looking for a quick rundown.
When enabling in Bios-with everything on default-do you just enable? Do you need to turn anything off-C & Q? or do you just turn in on and go?
System Spec-
990FXA-GD65 970A-G45
FX 8150 FX 6100
PCS+ 7870 GHZ 2 x GTX 550 ti SLI
G.skill Ripjaw X 1600 Low Cas G.Skill Ripjaw x 2133 running at 1600
H80i Waterloop H80I Waterloop
850w nzxt PSU 650 Nzxt PSU
HP - v300a 240GB SSD Western Digital SiliconEdge Blue 128 SSD
ZALMAN Z11 Plus Black Steel / Plastic COOLER MASTER Elite 430 RC
Asus DVD /RW Asus DVD RW
Should HPC be enable with the 2 computers along with all the STD setting in Bios
Thanks for your help guys

HPC locks the multiplier for the CPU at maximum setting so it has no LAG when asked to do a demanding job as its already running at maximum performance levels and doesn't have to wait for the CPU to realize that it needs to up the clocks from idle clocks(powersaving mode) to high performance clocks!
if you want no delay in performance thats what HPC is for as it will hold the CPU at its full clocks all the time...
as for C & Q that should be disabled as it may interfere with HPC mode and continue trying to throttle the CPU to lower clocks and voltages! if C&Q is off just enable HPC and it should function properly!

BX Master Bios Questions

sup, i have a bx master w/ a asus sloket adapter and it is a great setup.
and i need to update my bios to the ver 55 or 56 to fix other issues.
tryed the boot disk thing,and it gives me some errors, and bios write protect is disabled. tryed live update
and now i am running a older bios with very slightly less proformance and i get
unkown flash type msg after startup. i mostly find this to be kinda annoying since
i have to work on computers for a living and i should know how to fix this.
but this board is solid, at 1102mhz. it is also my main server with heavy traffic.
6mbs line with about 20 users leech'n 27/7 off this box. so not bad for a box i built out of used parts
thx

hi thx for the reply but i figured it out last night,i forgot that the bx master has a jumper to disable bios write. i pulled it, and that fixed my "unknown Flash type"
msg that was comming up after post. hooked a floppy drive up and it flashed to the new bios with no probs. the machine runs so much better! then i formated my drives and did a fresh install of windows enterprise server 2003 and installed the new nvidia drivers for my old geforce 3. it's running sweet
i do have one question, would recomend instal'n intels bx chipset drivers?
anyways much thx
neopark

Upgrade to SSD and BIOS question

I have an x200 model 7454CTO with attached Ultrabay (with optical drive, CD read/wrire, DVD read only). Original HD is 256gb, running XP pro SP 3. It has original BIOS version date 6DET33WW(1.10) 10/27/2008 and SMBIOS version 2.4. I am not having any issues with this laptop. I want to change to an SSD because other users of SSDs report much better speed.
My questions are;
1. Are there any issues with replacing my HD with the Crucial CT1993743 256GB m4 2.5" SSD?
2. There appears to be later versions of the BIOS. Have read somewhere that if the there are no problems best to leave BIOS alone. I don't know if the new SSD requires a BIOS update. Should I update the BIOS?
3. Is there anything to do about the SMBIOS?
Thank you

Thank you very much for your reply. I will leave the BIOS alone. My SSD is on it's way. I found it a bit interesting that the Crucial m4 SSD had good user reviews whereas the v4 had bad ones. Crucial originally recommended the v4 but I selected the m4 based on the reviews rather than any in-depth search. Both show up as compatible on the Crucial site. Hope the reviews are accurate.
Re SMBIOS. This was an item in the System Information just below the BIOS. I asked about this just in case it had any relevance.
Re Win 7. I have a relatively new smart phone running, I guess, the mobile version of Win 7. I think that this will give a bit of the touch-and-feel of Win 8 so that I may have a better understanding of how Win 8 will work for me. I am so used to XP that I am somewhat (actually very) reluctant to change. My senior age doesn't help.
Thanks again.

MSI GTX 770 Twin Frozr 2GB OC Bios question

I got the MSI GTX 770 Twin Frozr OC 2gb version and would like to know how to verify if I have the newest bios for the gpu.
This is the newest version listed on the website : http://www.msi.com/product/vga/N770_TF_2GD5OC.html#download
And thats an ss from GPU-Z, cant find the exact bios version in that downloadable zip from msi website and i cant seem to find the date created for the bios I have on my card now.
Having some problems with gpu load drops and microstuttering, so wondering if a bios update might sort out my problems.

The vbios on MSI site is a different vbios series (NV282MS.331) and older than your current vbios. Your vbios (NV282MS.352) is dated 06/18/13 while the one from MSI site is dated 06/11/13. Both are legacy vbios versions (no GOP support). You can try the latest hybrid vbios (GOP support) which is NV282MH.351. It is attached.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

Quick Bios Question

Hey Everyone just wondering im running the MSI 865PE Neo2 Without gig lan and was wondering does this mb come with the Configure S-ATA as RAID option on bios cuz i dont see it.
And another question why when i have any usb devices pluged in i get the blue screen of death.

Lots of problems with connecting USB connectors to the front of your case. If your sure it's not the USB device itself causing the problem, try disconnecting the USB connectors that go to the front of your case AT THE MOTHERBOARD(JUSB2 I believe). Then try again on one of the back USB jacks.

845PE BIOS Question

Hi guys,
I'm just wondering.............. Where are the options for PnP aware OS and Assign IRQ to VGA in the 845PE AMIBIOS.
I need to adjust these settings but i can't find them.
Could it be that these are automatically set depending on the installed OS without user interaction? or is it just a buggy BIOS version?
I'm a bit worried :(

Have you ever tried using the "Live Monitor" and "Live Update" Utilities?..As even if you choose not to use the BIOS flashing Utility...There won't be any question on which BIOS to Download ...As it tells you which is the Correct one for your Board Automaticaly ...I Love It!!....Sean REILLY875

G780 BIOS question

Hi,
I have a Lenovo G780. After recently discovering my processor has Turbo Boost, I went to search how to enable it.
Turns out the current version of my BIOS doesn't support this, but the new update from April does. This update is for Windows 8 though. My laptop runs Windows 7 Ultimate (self-installed, all the drivers are in place.). Would this still work? I know BIOS is risky to flash, so I'd rather know for sure that this can be done on Windows 7 too.
The update can be found here: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035004
Thanks in advance.
(P.S.: I have read about the known issues this BIOS has, and if I'm not mistaken this can be fixed by selecting "Legacy Support" on Boot Mode and "Legacy First" on Boot Priority?)

hi
I gues that the CPU is throttling down at some point
Can you try running a temperature Monitor on the CPU
http://www.alcpu.com/CoreTemp/
Check the Temp of the CPU Cores,
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Bios Question

I recently purchased a MSI K7N2-L mobo. Now the question I have is that its model # is MS-6570-010. MY bios version is V5.0. The only bios on MSI's website is for the K7N2 is v3.3. So, How can I have bios v5.0. Its dated the same as the version for the Delta mobo. Everything seems to be working fine, but this is confusing me. Also, I was having problems getting any memory to work in the board at first, so I tried to flash it to the v3.3 bios for the K7N2. But if gave me and error message. Any ideas?
Thanks!

i have the same board with the same bios...
but i have some probs (like i described in my other thread) and i fear, prolly i (we) have the nondelta board with the delta-bios. (if this could be?)
i cant change the multi in my bios, could u? this is my prob and my last hope is, that the reason is the bios/board thing...
did u have any experience with changing the multi on ur nondelta board with deltabios?
on my bridge is written mcp, not mcp2 and a tool says, its the mcp-t, but not mcp-t2, so i think, i didnt have the delta version (also i didnt have the 3. ide slot)

Msi R9 280x Gaming oc edition included BF4 Limited Edition "Bios question"

Hi,
i have some question regarding the bios from this card "Msi R9 280x Gaming oc edition included BF4 Limited Edition"
i have 2x "Msi R9 280x Gaming oc edition included BF4 Limited Edition" Cards serielnumber one is : 602-V277-28SB1311072568 and the serielnumber two is : 602-V277-28SB1311073312
Because i have a small problem !
my first question is what is the newest bios version? because i find in Reviews pages from this card there are always other bios versions than my!
my bios version is: 015.040.000.003.003435(113-C3865000-G77)
some Reviews pages have: 015.040.000.000.003435(113-C3865000-X77) or 015.039.000.001.003331(113-C3865000-M77) or 015.039.000.001.003331(113-C3865000-G77)
why I ask you here ?
1. with afterburner I can not change the voltage (field-locked)
2. simply if I am uptodate with the bios ?
next question is :
when i save my bios with GPU-Z and have the small switch (on the card) on "1" .....then is this bios a "UEFI image"
when i save my bios with GPU-Z and have the small switch (on the card) on "2"......then is this bios a "legacy image"
i check it with VBE7.0.0.7b!
now my question is why is that and on what I should make it if I don´t use UEFI system? please help me
my system !
OS: Windows 7 64bit
Mainboard: Asus M4A87TD EVO <--- that board don´t use UEFI !
summary!
need the newest Bios version !
Why can´t change the voltage with afterburner ?
why switch 1 is "UEFI image" and 2 is "legacy image" ?
and when i flash to the new bios version which switch I need to use ?
when you need other informations from me let me know !
ps: sorry form my bad english but i gave my best i hope you can help me ......thanks in advance

Quote
my first question is what is the newest bios version? because i find in Reviews pages from this card there are always other bios versions than my!
my bios version is: 015.040.000.003.003435(113-C3865000-G77)
some Reviews pages have: 015.040.000.000.003435(113-C3865000-X77) or 015.039.000.001.003331(113-C3865000-M77) or 015.039.000.001.003331(113-C3865000-G77)
why I ask you here ?
None of that is a bios version. We need a link to a copy of your vbios saved to file and uploaded to a file hoster to check if there is a newer version. If not allowed to link yet add a break to the link so it is masked being a link.
Quote
1. with afterburner I can not change the voltage (field-locked)
Others reported that too when using the same card. If unlocking won't work (>>How to use MSI Afterburner<<) contact MSi about it as there seems to be an issue: >>How to contact MSI.<<
Quote
next question is :
when i save my bios with GPU-Z and have the small switch (on the card) on "1" .....then is this bios a "UEFI image"
when i save my bios with GPU-Z and have the small switch (on the card) on "2"......then is this bios a "legacy image"
i check it with VBE7.0.0.7b!
now my question is why is that and on what I should make it if I don´t use UEFI system? please help me
UEFI is aGOP compliant vbios that allows to use secureboot/fastboot (Windows 8/8.1). If not using UEFI booting it doesn't matter which you use. Older mainboards with UEFI but not being GOP compliant on the other hand won't work with a GOP vbios and only the legacy vbios allows to use the card.

Vista pavilion rp408ua#aba CPU bios question

So i'm looking to upgrade my processor to a 2GHz vs the 1.6 amd turion that my notebook came with. Someone said to update my bios before attempting this in orfe to be sure it can handle the processor. One problem is that I can't seem to find my notebook on hp's site anywhere. Is there anyone that can help me with this. Second. I hear that I can't upgrade to windows 7 on this note. Is this true? I'm trying to run my digital audio workstation on this until I can afford to finish building my desktop. Thank you in advance for your help.
This question was solved.
View Solution.

gonzoneko wrote:
So i'm looking to upgrade my processor to a 2GHz vs the 1.6 amd turion that my notebook came with. Someone said to update my bios before attempting this in orfe to be sure it can handle the processor. One problem is that I can't seem to find my notebook on hp's site anywhere. Is there anyone that can help me with this. Second. I hear that I can't upgrade to windows 7 on this note. Is this true? I'm trying to run my digital audio workstation on this until I can afford to finish building my desktop. Thank you in advance for your help.
Hi,
Have a look in here:
http://h10025.www1.hp.com/ewfrf/wc/product?product=3340125&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
Latest BIOS:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-56219-1&cc=us&dlc=en&lc=en&...
Manual including compatible parts for an upgrade:
http://h10032.www1.hp.com/ctg/Manual/c01035657.pdf
I wouldn't upgrade the laptop to Win 7 as you will have to buy a licence. I suggest to sell it and buy a used newer laptop instead. Calculate the Windows licence cost plus the upgraded parts and it might be the same/near price as the newer laptop already with Windows 7 on it.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

[l430] bios question

So I just got my L430 running W8. Maybe I am just not turning my computer off completely, but whenever I attemp to turn it off in W8 (ctrl + alt + dlt then power off) it botts into w8 in like 3 seconds. I do not have an SSD so this seems really fast.
Anyway I am trying to get into the bios, but no matter what button i press it does not work (tried f1-f12 and ESC).
Any help would be appreciated.
Ian.
Solved!
Go to Solution.

Hi sourav17405 and welcome to the community,
Windows 8 has hybrid sleep enabled by default, that's one reason it boots so fast.
Open the charms bar on the right of your screen and click settings. Go to Control Panel. Choose Power options. On the left click Change when the computer sleeps. Choose Change advanced power settings. Click the sleep tab and then Allow hybrid sleep. Make sure it's turn off on battery and plugged in. At the bottom click apply, then OK.
That should allow you to get into the bios.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

BIOS questions

Similar Messages

Maybe you are looking for