Bios recovery for K8N NEO V2.0 MS-7030 VER 3.0

HELP!!!
I TRIED LIVE UPDATE TO UPDATE MY BIOS AND IT FAILED.NOW IT DOES NOTHING.CAN ANYONE HELP??/

try recovery procedure:
http://global.msi.com.tw/index.php?func=html&name=service_note#recovery

Similar Messages

  • Bios mod for K8n Neo/4 Sli Platinum

    I have this motherboard, only the box is blue. I dont know if it is platinum or not, but it says platinum when it starts up.
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=641
    I want a bios mod that would allow me to go higher with my vcore. I can go to 1.55v now.
    I found this site but I cant figure out which to choose.
    http://forums.techpowerup.com/showthread.php?t=1960
    Here is a image of Cpu-z

    Quote from: pcharouz on 01-May-06, 10:51:23
    I am kind of confuzed too, this is what it says in my newegg history.
    MSI K8N Neo4/SLI Socket 939 NVIDIA nForce4 SLI ATX AMD Motherboard - Retail
    Item #: N82E16813130492
    MSI 626 913 0828  $123.00
    The only place it says platinum is the bios, there is no platinum on the box or board, is there a non platinum board?
    yes NVIDIA® nForce4 SLI based CHIPSET has a 4 models:
    K8N Diamond, K8N SLI Platinum, K8N SLI Series(K8N SLI-FI and K8N SLI-F)
    look here mobos table. also can compare:
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php?kind=1&CHIP=68&NAME=Socket%20939%20(AMD%20K8)

  • BIOS upgrade for K8N Neo-V 2.0, MS-7030, from v9.0?

    Does anyone know where to find the latest BIOS for the older Socket 754 MB mentioned in my Subject?  It's running v9.0 now, and I've heard that there's at least one newer release.  I'm having trouble with suspend/resume and hibernate, and was hoping a new BIOS might help.
    I submitted a request via the Online Service ticketing system two days ago, but haven't heard back yet.
    Trying MSI's site at http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=210
    it offers only the "Live Update" service for this particular board, which won't work for me because I don't run Windows, only Linux (can boot to a DOS floppy to reflash, of course).
    ftp.msi.com.tw access requires a username/password, and the old "*********" one isn't accepted anymore.
    thanks,

    Never mind, I was able to access the FTP site as '*******' / '*******', downloaded and flashed the latest v9.14 BIOS.  The process was fast enough that on un-hibernating back into Linux after the upgrade, all my ssh sessions were still connected, which was nice 
    Whether this update will solve the AGP-related suspend trouble, only time will tell... that doesn't happen every time.
    btw, is there any way to prevent the "NVIDIA RAID BIOS 4.81" scan from slowing down a boot cycle, turning it off completely for systems that don't use RAID?  One would think that setting all RAID options to DISABLED in the BIOS setup screen would do so, but it pops up and spends a few seconds scanning regardless.

  • Who have v1.56 bios for K8N Neo FSR,give me please.thx

    who have v1.56 bios for K8N Neo FSR,give me please.thx 

    Bios Collection. *Updated * 7025 1.B beta4 follow Syar's MSI Nvidia64 Bios Collection  link.

  • Which drivers for K8N Neo 2 Platinum

    I'm just about to place an order for a K8N Neo2 Platinum to go with my AMD 64 3000+ Winchester.
    As is usual I normally download the latest relevant BIOS and drivers in advance so everything is ready to go when the hardware turns up.
    However, looking at the MSI page, there seems to be a bewildering array of drivers for this board: Neo2 drivers and it's not exactly clear which ones are for my specific board.
    For example, I can't seem to find a relevant SATA driver from the list.
    The actual board I'm going for is this one from Overclock: link to board
    Can anyone list clearly the drivers, BIOS and any other utilities I will need when installing this board?
    Thanks.

    Well after a lot of reading, I've determined that the following files are applicable to my board:
    BIOS
    BIOS: 7025v14.zip
    Drivers
    NVIDIA nForce3 System Drivers: NF3_CK8S.zip
    Marvell LAN Drivers: MarvellWXP69.zip
    Realtek ALC Series AC'97 Audio Drivers: Realtek_ALCXXX_73.zip
    I still can't seem to find a SATA/IDE driver as none of the ones listed are compatible with a Neo2 Platinum.
    The closest I can find is the Nvidia nForce3 SATA/RAID driver for Windows 2K/XP but that is only for K8N Neo Platinum (7030).
    Anyone know if this is the same driver for the Neo2 Platinum (7025) also?
    Have I missed anything?
    There are also lots of utilities, some of which appear to be useful, if not necessary:
    Utilities
    NVIDIA nTune: nTune_MB.zip
    MSI DigiCell: DigiCell_MB.zip
    MSI PC Alert 4: PCAlert4_MB.exe
    MSI Core Center: CoreCenter_MB.exe
    MSI Live Update: LiveUpdate.exe
    Fuzzy Logic 4: FuzzyLogic.exe
    MSI DMI Browser: DMIBrowser.exe
    MSI i-Speeder: I-SPEEDER.exe
    MSI WMI Info: WMIInfo.exe
    MSI PasswordKeeper: PasswordKeeper.exe
    MSI SecureDoc: SecureDoc.exe
    MSI InfoView XP: InfoView.exe
    MSI GoodMem: insgoodmem.exe
    MSI Lockbox: LockBox.exe
    Anyone care to comment on the usefulness (or not) of any of those utilities?

  • BIOS 2.1 K8N Neo Platinum 7030

    What about the latest BIOS 2.1 K8N Neo Platinum (7030) ? Is it safe to upgrade or should i stay at 1.7 (that really works great) ?

    If 1.7 is working for you I'd suggest staying with it. (Always a good idea even if the new bios is stable).
    I had problems overclocking with V2.1 (the ide initialisation hangs) and many others have complained about problems with more than one stick of mem.

  • MOVED: Quietest CPU Cooler for K8N Neo 2 Platinum Motherboard?

    This topic has been moved to AMD64 nVidia Based board.
    Quietest CPU Cooler for K8N Neo 2 Platinum Motherboard?

    Artic Cooling Freezer 64
    Quote
    Extremely Quiet
    The low speed 80 mm fan reduces the noise level to a minimum.
    The patented fan holder is able to practically eliminate the typical buzzing sound of 80mm fans.
    Patent No 203 07 981 U1 (Germany)
    Patent No 10/834 232 (USA)

  • Where do i find bios v1.1 for k8n neo platuinum?

    i'm wondering where i can find bios v1.1 for my mobo k8n neo platinum?
    Oh, and how do i flash my bios to use it?

    Browse the forum there is a link with all the bioses.
    But why would you want 1.1 ???
    Its the first bios...AND IT SUX !!!
    Try the 1.4 official if you don't want to be a beta tester...
    You can get that from live update that comes with your mobo CD.

  • BIOS FOR K8n neo platinum

    A while back there was a big post about how to properly upgrade your bios and he had listed every bios beta or official for download.  Anyone have that post? and What is the best bios for the K8n Neo platinum? Im still running on 1.1....

    Quote from: Supershanks on 09-June-05, 04:24:05
    Just the usual bios to bios temp tweak - no worries   
    Have been running with speedfan with a 4C offset think i can dith it now with 1.8 
    Higher or lower?
    Hmmm... My SpeedFan is running with no delta adjustments on the temps. I wonder if there is a discrepancy in what it's reporting & what it actually is after you boot into Windows
    I'd try to go by what the Hardware Monitor says, but temp's always seem to be high when you're in BIOS anyway....

  • New Bios for K8N Neo 2?

    I belong to the overlockers.com forum. People over there are dropping MSI's left and right because of stability issues and overclocking problems. This is not to mention the quirky temp readings and vcore settings. It seems that some of these issues could be addressed by a new bios. These same issues have been fixed by Epox with their bios updates. When is MSI going to get this done? I suggest it should be soov or the reputation of this board and MSI are going to ake a beating.

    Quote from: MurdoK on 12-February-05, 18:04:15
    Hello !
    What is going on ?
    I have tried this so called 1.52 Beta Bios on my K8N Neo2 Platinum, it flashed well but when i tried to restart my System,
    it will run for 1-2 seconds then it shuts off !!!!! No Post - Just shut off !!
    I have tried to clear the Cmos two times but there is always the same Problem. Bootblock Disc doesn´t work neither.
    What can I do ? Please help ?
    GREETZ
    OMG that could of been me. I was going to flash those yesterday.  but i got worry, and ask myself y haven't any1 post back on the forum. so i was think it could of screw up their MOBO. I was gonna post a warning about it but, it was late and i got lazy.
    I could of save your MOBO but, My laziness killed your board.
    anyway i hope u get fix. 

  • AMDx2 BIOS update for k8 neo 2 platinum

    Is there a bios update for the k8 neo 2 platinum board that allows the use of the new AMD x2 processors.
    Cant seem to find one on the MSI website.

    Since BIOS Version  7025 v1.9
    MSI K8N NEO2 PLATINIUM BIOS

  • Good News For K8N Neo Platinum Users!!!

       Ok, after fiddling with my BIOS for almost 2 days now, and scanning the forums for a solution, I contacted MSI Technical Support in California, USA. They are sending me a new BIOS chip, free of charge, so anyone having a severe problem with BIOS revisions 1.8 and 1.9 on the K8N Neo Platinum (MS-7030) please give tech support a call, I let them know I would be posting this in the forum and they will be inandated with phone calls, but woohoo, they are sending a new chip pre-flashed with BIOS revision 1.7.
    Please refer to this thread for the reasons why:BIOS v1.9 Is Terrible

      What good news?  UK based MSI did not offer any such replacement bios after my problems updating to 1.8 bios.
    I purchased a new bios chip with 1.9 bios from a UK supplier.....after fitting the bios I returned to the same problems as before, failure to boot past post and freezing in bios menu. I then remembered another post on this sight and removed one stick of memory......everything back to normal    .I have just fitted a 1gb Corsair cas 2 memory and all seems well I will save my 2X 512 Corsair XL my next project which will not be a MSI Motherboard  
    MSI UK  have not come out of this very well and from the posts that I have read there are quite a few people out there with problems. Many thanks to all those who posted on this,  it certainly helps to know that you are not the only one with problems.
    MSI K8N Neo ...AMD 3400 Newcastle
    Zalman Cooller CNPS7000A
    1 X 1Gb Corsair 3200C2PT
    Gainward 6600GT Golden Sample GLH
    550W Enermax Power Pack(EG651P-VE)
    Sound Blaster Audigy
    Seagate 300 Gb Hard Drive

  • When a new bios grrrrrrr for k8n

    As title as i cant get a stable OC over 2185mhz grrrrrr
    its a pain in the ***

    I sent them this:
    Quote
    When will you guys be releasing a new bios for the K8N Neo Platinum that fixes the issues with false CPU temperature readings? As far as I know, none of the beta bioses that are out right now fix that particular issue. I have an AMD Athlon 64 3200+ (Clawhammer). My temperatures have ranged anywhere from 60C to 184C, it's obvious that these temperatures are wrong because the computer would should itself down somwhere around 75C. I am also sure the the CPU heatsink is seated correctly as I have reseated it many times. I took a look around on your forums and also noticed that I am not the only one having these problems as tons of people with Clawhammer and Newcastle cores are having the same problem. Is there an estimated release date for a fix on this?
    Thanks, Alex
    And this is what I got back:
    Quote
    Dear Alex,
    Thank you for contacting MSI Technical Support.
     The CPU temperature is different and there is tolerance difference between the data showed and the real temperature according to the CPU model and type and even produce date and manufactory . And this MB supports thermal protection function, it will prevent the MB and CPU from overheating. So please don't worry about the temperature.
    We have tested various CPU with newcastle core in our lab but we can't find the same problem. We'll keep checking with AMD and contact them to get more different CPU to analyse it futher together with them. New BIOS will released right now if we have some findings and figure out the sloution. Sorry for any inconvenience caused.
    Thanks for your supporting MSI product.  Please feel free to let us know if you still have any further issues or inquires.
    Best regards,
    MSI Technical Support

  • Screwed bios update for K8N Neo2 board

    Hello,
    I had a perfectly working system for the last couple of months (see below).  Last night I updated my bios from version 1.41(mod bios) to 1.52.    I downloaded the 1.52 bios from here:  http://www.lejabeach.com/MSIK8N/k8nneo2.html
    Unfortunately, when I try to boot the machine, I get a quick glimse silver Plantinum banner srceen before the machine shuts down.   I have pulled the plug from the rear of the case and then reinserted it about 20 seconds later and then rebooted the machine while holding down the 'Insert' key.  Same result....The machine momentarily shows the banner screen and then shuts down. 
    Any suggestions will be apprecaited.
    Thanks

    this bios is a disaster many are reporting serious problems...do you have any other ram to try ....
    Beta BIOS's should be used by those with BIOS saviors only unless lots have success with one.
    Obviously not the case with this BIOS.
    I have seen a work round that would be worth a try if you had any ram you could try.
    1) Hello, I had exactly the same problem with my MSI K8N Neo 2 i flashed to the 1.52 beta bios and had the 3 second problelm, pulling my hair out i tried new PSU, blah blah, the thing that fixed it was removing my Crucial Ballistix PC4000 Ram and sticking some el cheapo PC3200 ram in the, system booted perfectly >?
    2) My BIOS just expired whilst updating to 1.52, I will give your method a try to see if I can get it to boot and roll back the update.
    YAAAAAY!! Removing my Corsair XLPT and using an old Twinmos 3200 stick has got my machine up and running again so a BIG cheers bud!
    Seems the 1.52 likes cheap ram. Go figure
    that is quote from here:
    http://www.xtremesystems.org/forums/showthread.php?p=719628&highlight=bios+1.52#post719628  ...post 984

  • New Windows XP 64bit, but no drivers for K8N Neo Platinum

     
    Hello,
     I have a MSI K8N Neo Platinum with an AMD 2800+. Just received the new Windows XP 64bit edition after attending a trade show in Houston. Used Partition Magic to make a separate partition on my SATA 400GB HD, knowing there was possibly going to be a problem. This is the final release, retail packaged, not the Beta.
    The only drivers found was for my MSI Nvidia 5600 AGp video card. No other audio, Nvidia chipset or board drivers are plug & play. Onboard LAN isn't even found.
    Any drivers out yet? I figure i'll have to wait. Can't get updates either bacause it won't detect onboard LAN or a Linksys or 3Com PCI card I tried also.
    Woodrow

    There most certainly are nVidia drivers.  The only thing that there aren't drivers for currently is the onboard sound.  This, combined with lack of driver support for my peripherals (webcam and printer) are why I haven't made the switch.

Maybe you are looking for

  • Mapping logic needed

    Hi frnds, i am doing an idoc-file scneario...below are teh strcuturess Idoc: ---ZTXT(NOde)    ---ZLine1(Subnode)   [0:10 occurance]         Name(Attribute)          Value(Attribute)      File: ---TXT(NOde)       --Cost       --rate       --excValue T

  • MSMQ Errors in log

    I have W2K8R2 cluster. MSMQ is not a resource within any of the groups. Any idea why I'm seeing these errors in the log? WARN  [RCM] Failed to load restype 'MSMQ': error 21. WARN  [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present o

  • IView in seperate window IE7

    Hi, we have a problem with IE7: if we call an iView in a seperate window, the browser starts to load without ending. On the main portal page we get an page-error message if we click on the yellow message-icon in the status bar: 'newwin' is null or no

  • Restoring images from Time Machine?

    Hello, I deleted some master images that should not have been deleted. I am using Aperture 2.1.4. In the mean time I added many new images, before I found out that the images were deleted. Anyway I can get these back with Time Machine? Thank you

  • Portlet business logic

    hi all, I've done a decent research and testing on how to create, test, deploy, publish PORTLETS, unfortunately this is far from enough from what my goals should be. The point is: 1) how can I add business login to portlets ? Until now i've built j2e