BIOS Request for G580 Model 2189 Windows 7 x64

Hello, could someone please provide an original BIOS for G580 Model 2189 x64 Windows 7? Thank you!

Not to difficult to find... Why the "original" BIOS request? Usually not a good idea to backstep BIOS unless directed to by support professionals. Also, BIOS updates are independant of Windows Versions, the installer or "flashing": program used to install the BIOS file is sometimes Windows version dependant.
Either way - check this page for BIOS files: http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
Good luck.

Similar Messages

G580 Model 2189 Wlan mit 5 GHZ?

Hallo, ich habe ein Lenovo G580 Model 2189, dazu Windows 8.1 installiert.
Meine Frage, Läuft meine WIFI Wlan Broadcom 802.11n auch auf 5 Ghz?
Laut Wiki müste doch N mit 5 Ghz laufen oder? Meine Fritzbox habe ich umgestellt auf 5 Ghz, mein Handy erkennt es und funktioniert gut nur mein Lenovo erkennt es nicht. Er findet es noch nicht mal...!
Wenn es nicht funktionieren sollte, kann ich da einen anderen WIFI Chip einbauen und wenn ja welchen?
Danke
lg
klaus

Hallo Klaus und willkommen im Lenovo Community Forum.
Es werden ausschließlich 802.11n single band Module verbaut, die das 2,4 GHz Frequenzband unterstützen. Welche Module das im G580 sein können, findest du hier auf Seite 102 (Pos. 16). Andere Module werden aufgrund der BIOS Whitelist nicht unterstützt. Ein Booten ist nach dem Einbau eines nicht unterstützen Moduls nicht mehr möglich.
Als Alternative bieten sich jedoch externe Geräte an, z.B. ein 5GHz USB WLAN-Stick.
Gruß - Sebastian
→ Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.

Invalid request for a change in window state

Ok...
Creating a JSR168 portlet and it works fine in Pluto, but I get the following when I deploy to P7:
ERROR: Content not available. REASONE: Invalid request for a change in window state
Here is what the portlet is supposed to do:
* Display a form
* User clicks find
* Lookup is performed
* Window state in processAction() method of portlet is changed to MAXIMIZED
* I'm guessing this is where the error is occuring
I also think that for the TableContainer, I have some sort of attribute incorrect having to do with one of the channelsIs values.
I tried toggling them one way or another without any effect.
Suggestions?

Ive run into this issue also. I need a way for a portlet to change to its maximized state for the purposes of user registration. Is there anyway this can be done? I know that sun jsp "Providers" which are shown on their example desktop, have some sort of maximized state that they can go into, but im not sure how to use this in a portlet.
There seems to be very inconsistent support between the proprietary sun provider api, and the portlet api.

"Legacy Mode" BIOS request for MSI R9 280X GAMING 6G

"Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
S/N: 602-V277-310B1407096530
Installed BIOS: TV277MS.3A0
Hi,
I have the annoying problem with my new video card: a screen is periodically blinking in 2D. Probably that problem already solved in a newest BIOS?
I have to use "Legacy" mode because of my PC does not start otherwise.
Related hardware: MB: MSI P67A-GD65 B3 (BIOS 1.19), CPU: i7-2600K, Monitor: HP ZR2440w (DP connection).
Thank you.

here is .3A1
TV277MS.3A1 legacy
TV277MH.3A1 uefi
flash guide:
Quote
Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (xxx.rar) and put the included file (TVxxxxx.zzz) on that stick.
Rename TVxxxxx.zzz to zzz.rom.
Put the atiflash.exe from: https://www.techpowerup.com/downloads/2306/atiflash-4-17/
on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 zzz.rom [ENTER] and let it flash the vbios.

UEFI bios request for N780 TF 3GD5/OC

UEFI bios request for N780 TF 3GD5/OC
S/N: 602-V298-010B1308089788
ROM: 80.10.37.00.15 (P2083-0020)

Quote from: Marski69 on 14-May-14, 01:44:02
Hi Svet
Any chance that my Bios is the same?
And i can use it?
Can i post my Bios.rom?
Tnx for reply!
Em, we don't have a second sight... You need to at least supply some info on your card namely S/N and a copy of your vbios saved to file (that you uploaded to some file hoster and added link here).

BIOS firmware request for G580

Can anyone help me with this:
I have a lenovo G580(20157) Essential laptop and my BIOS isn't accessible due to installation of ARCH LINUX on my laptop I tried various things to recover my BIOS back but couldn't so is there a link where I can download my BIOS from??
Here are my computer details:core
*- description: Motherboard
product: Emerald Lake 2
vendor: LENOVO
physical id: 0
version: FAB1
serial: WBxxxxxxxx
slot: Part Component
*-firmware
description: BIOS
vendor: LENOVO
physical id: 0
version: 62CN41WW
date: 09/10/2012
size: 128KiB
capacity: 4032KiB
capabilities: pci upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer int10video pc98 acpi usb biosbootspecification netboot uefi
Moderator Note; s/n edited for member's own protection

Not to difficult to find... Why the "original" BIOS request? Usually not a good idea to backstep BIOS unless directed to by support professionals. Also, BIOS updates are independant of Windows Versions, the installer or "flashing": program used to install the BIOS file is sometimes Windows version dependant.
Either way - check this page for BIOS files: http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
Good luck.

GOP /UEFI bios request for GTX N770 TF 2GD5/OC

Symptoms: System will not POST after ASUS Z9PE-D8 WD mobo update to latest BIOS. Worked fine previous. System will POST and run fine with other graphics cards.
The card will POST and run fine in ASUS MAXIMUS V GENE mobo with not current bios. With which I have pulled GPU-Z info as required for a BIOS request.
Prompt response greatly appreciated! There is work I need to be doing! Thank you so much.
S/N: 602-v282-220B1308092571
NVIDIA Firmware Update Utility (Version 5.141)
Adapter: GeForce GTX 770 (10DE,1184,1462,2825) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1112 bytes
IFR CRC32 : 189B4216
IFR Image Size : 1536 bytes
IFR Image CRC32 : 4552879D
IFR Subsystem ID : 1462-2825
Image Size : 99328 bytes
Version : 80.04.C3.00.21
~CRC32 : D6321A32
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20050000
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 770
Board ID : E12D
PCI ID : 10DE-1184
Subsystem ID : 1462-2825
Hierarchy ID : Normal Board
Chip SKU : 425-0
Project : 2005-0000
CDP : N/A
Build Date : 06/03/13
Modification Date : 06/18/13
UEFI Support : No
UEFI Version : N/A
UEFI Signer(s) : Unsigned
Board: Asus Z9PE-D8 WS
Bios: Version 5206
VGA: MSI GTX 770 2GB/OC
PSU: Corsair TX750
CPU: Intel Core E5-2687W Default CPU settings, no OC
MEM: Crucial 2133Mhz 16GB
HDD: Kingston HyperX 250GB SSD
COOLER: Thermaltake
OS: Windows 7 64x Pro
Sign-On Message : GK104 P2005 SKU 0000 VGA BIOS
MSINV282MS.352

Quote from: flobelix on 19-November-13, 16:07:12
Don't bump your posts: >>Please read and comply with the Forum Rules.<<
I guess you mean ASUS Z9PE-D8 WS and not WD. That is a dual cpu socket XEON workstation board not meant for gaming (hardware). The NV282MS.352 vbios the vga uses is a current one. Contact Asus and report the compatibility issue and maybe they can help you with.
My use of my system is video editing. It uses gpu heavily for encoding. Hence, the hot GFX card I just purchased. I have been in contact several times with Asus, since they also produce an N770 card, and they do not have any known compatibility issues with their own products, at least. The card worked perfectly with this N770 card when it had the previous BIOS. It was when I upped the BIOS to the latest version that I had the issue. Other GFX cards do work. The N770 wont finish POST. 100% fail. I ended up purchaseing a new BIOS chip with the previous bios flashed, since they could not produce a procedure for me to downgrade. However, I will not be able to use new CPUs with the later micro-codes until I find a way to update the BIOS. Otherwise, I would be FD&H with the old one.
Thanks for the reply,
Rod

Bios request for gtx 970gtx

hi which one can i use for my model:
Msi gtx 970 Gaming 4G
S/N: 602-V316-03SB140902xxxx
bios: https://www.dropbox.com/s/m0czj8z9i5mvdmp/GM204.rar?dl=0
ive flashed it once with a bios from here i believe it was .184 but you can check the file

Sorry it was stupid question i know. Next time maybe i should post when im fully awake
I run it, it flashed and closed window automaticaly card still working afaik
Oh before i forget thank you very much for the bios file update

UEFI Bios Request for MSI Twin Frozr III HD 7950 O/C Non Boost card, has 7970pcb

Its this one Version: 015.020.000.000.001083 You make this forum far to complicated to navigate for old people , could not figure out how to insert an image, and you can't post external links either. So i linked the bios version, great cards by the way i have two of them, purchased a new motherboard that supports UEFI so I wanted to try. Thanks. More info:
GPU Device Id: 0x1002 0x679A
113-C3861300-X01 113-MSITV277MS.202 TAHITI B0 PROH C38613 GDDR5
3GB 500E/150M
(C) 1988-2010, Advanced Micro Devices, Inc.
ATOMBIOSBK-AMD VER015.020.000.000.001083
C3861300.101 PowerTune Limit: 175 to 260
CCC Overdrive Limits
GPU Clock: 1100.00 MHz
Memory Clock: 1575.00 MHz
Clock State 0 Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Boot Clock State 1
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Optimal Perf Clock State 2
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: UVD Clock State 3
Core Clk: 300.00 MHz
Memory Clk: 150.00 MHz Flags:

S/n : 602-v277-05sb1205073711 first card S/n 602-v277-05sb1206017147 for Msi Twin Frozr III Hd 7950 o/c regarding UEFI bios request.

UEFI/GOP BIOS Request for MSI R9 280X Gaming OC Edition

Requesting a UEFI/GOP Bios update for my R9 280x Gaming.
S/N: 602-V277-19SB1309119942
BIOS Pic:
Thanks

the card should have dual BIOS chips,
turn off your computer, then switch it to second BIOS chip
and check if will be GOP compatible

Custom BIOS requested for the MSI GP60 2PE Leopard

Hi,
Is it possible to generate a BIOS update, for allowing the notebook to have 32 GB (2x16 GB) SODIMMs. It seems that the Memory Reference Code needs some adjustments to allow this. I got currently the MSI GP60 2PE Leopard (i7-4700HQ • 16 GB DIMM).
The currently available modules are IMM2G64D3LSOD8A-B15E or the IMM2G64D3LSOD8A-C15E from Intelligent Memory.
With kind regards,
Roland

nope, can't do such modifications

BIOS update for G580

Hi!
If anyone can help me, I'm having some problems with my Lenovo G580 laptop.
The problem is every time I install graphic drives the system crashes and I get the blue screen. After that, the system runs recovery and gets back to the point before installation of the drivers. I have tried with the latest driver from the Lenovo site, but same thing happens. Also I have tried not to install the driver, and later Windows update installs it for me, and again system crashes. I'm running it on Windows 7 64bit
I got a tip to update my BIOS, but I can find anything on Lenovo site. If anyone can help me with some advice, I would appreciate!
Thnx!

I have done that allready, when it downloads it with windows update, it crashes again, same result.

Need BIOS backup for G480 Model NO 20149(Old version BIOS)

Hi, Those who have Lenovo G480 Model No: 20149, I really need your cooporation to provide me your BIOS backup of OLDER version (The newest version is V9.01). My BIOS information is 5ECN96WW after updated to the newest version. Im requesting this due to performances issues I faced after updated bios to the latest version (laptop seemed to boot slower). Please help me. I need to restore my BIOS to the older version thus I will need the BIOS.rom file.
You can use Universal BIOS Backup Toolkit 2.0(google it) to backup your BIOS. Click Read then wait for it to read then click backup after that. Save the backup file and upload it to the Internet and provide me the download link.
I've used this program to backup my bios and it worked fine. Thank you for your help.
Solved!
Go to Solution.

Hi kenpeacez,
thanks for posting. Was rrading through your thread and was wondering if you could explain the issue you're facing upon updating the BIOS.
you mentioned in your post that you saw some performance changes. could you explain that in a little but more detail. Let me see what i can do help you in regards to this.
Hope to hear back.
Regards

UEFI GOP BIOS request for GTX 760

HI, I'd like to request a GOP bios for my twin frozr gtx 760:
s/n: 602-V284-440B1407039912
BIOS download link: h**ps://www.sendspace.com/file/f29lal
thanks!

oh right! My computer still isn't doing UEFI fast boot properly - the BIOS post screen still shows up for 5-10 seconds (even though I've set the post screen time to 0) - after that it's a 4-5 second boot into windows 8. I figured it was the graphics card my BIOS was having trouble with, must be something else...!

Unlocked BIOS requested for GT70 2PE Dominator Pro BIOS E1763IMS.51B

Svet,
Could you create for me an unlocked BIOS of BIOS version E1763IMS.51B.
I need it for the windows phone virtual machines ... I need to enable hardware virtualization support.
Why on earth is vt-x not enabled???
Sv.

Let me explain a bit more... I am using visual studio and want to emulate windows phone on windows. Thus the hardware requirements are that i need to have activated:
Hardware requirements for Hyper-V
1.A 64-bit (x64) processor ◦Windows Server 2008 was the last 32-bit (x86) Windows Server release and Windows Server 2008 32-bit version *does not* include Hyper-V
2.Hardware Virtualization Assists in the form of:
◦Intel VT-x (initially codenamed Vanderpool)
◦AMD AMD-V (also called SVM and initially codename Pacifica)
3.Hardware Data Execution Prevention (DEP*):
◦On Intel processors this is called Execute Disable (XD). This feature must be enabled in the system BIOS.
◦On AMD processors this is called No Execute (NX). This feature must be enabled in the system BIOS.
Note: When you enable hardware assisted virtualization (Intel VT or AMD AMD-V) in the BIOS, you must TURN THE SYSTEM OFF. NOT REBOOT. OFF.
Hyper-V R2 and SLAT Hardware
For traditional server virtualization or virtualization desktops without RemoteFX, SLAT hardware is not required, but HIGHLY RECOMMENDED for improved performance.
•On Intel systems this is called Extended Page Tables (EPT)
•On AMD systems this is called Nested Page Tables (NPT) or Rapid Virtualization Indexing (RVI)
These features are usually on by default. If there are BIOS options, enable them.
NOTE: For virtualizing desktops using RemoteFX, SLAT hardware is REQUIRED. To take advantage of SLAT hardware, you must be running Windows Server 2008 R2 or later or Microsoft Hyper-V Server 2008 R2 or later. Previous versions (Windows Server 2008/2008 SP2 & Microsoft Hyper-V Server 2008/2008 SP2) do not support SLAT hardware and will simply ignore these hardware capabilities.
Hyper-V : What to Disable in the BIOS
There are some hardware features that Hyper-V does not utilize and enabling them will prevent Hyper-V from loading. Specifically, please be sure that:
•Intel VT-d is disabled
•Trusted Execution is disabled
If either of these options is enabled, Hyper-V won’t launch and errors will be posted to the Event Log, for example:
•Event ID 41: Hyper-V Launch failed; Either VMX not present or not enabled in the BIOS
•Event ID 32: Hyper-V Launch failed; At least one of the processors in this system does not appear to provide a virtualization platform supported by Hyper-V
My question: Are these options properly set in the bios, because windows refuses to execute the virtual machine.
Hopefully it helps...

BIOS Request for G580 Model 2189 Windows 7 x64

Similar Messages

Maybe you are looking for