BIOS Request MSI A6200-220US
Hello, I am a new member trying to upgrade my RAM from 4GB to 8GB on my MSI A6200-220US Core i3-350M but I am having issues and I am wondering if a custom BIOS would fix this. When I put in my two new sticks the laptop boots as usual giving me the options to open the bios (which I can and it shows the RAM as 8GB with a speed of 1067MHz) but when I try to boot windows it loads for a second then gives me a blue screen for another second and then shuts off.
The RAM I bought is 2 MICRON MT8KTF51264HZ-1G9E1 4GB PC3-14900 (DDR3L 1866) sticks which I have tested in a different machine (Dell Inspiron M5040) and confirmed that they work.
I've read online that DDR3 RAM should all be compatible with each other (with 204-PIN SODIMM) and thus it seems like this RAM should work. But reading online many people mention updating the RAM settings in the BIOS but I do not seem to have any settings, it simply tells me how much I have installed and at what speed. Does anyone have an idea of a way to fix this? Or is the RAM I bought simply incompatible? Would a custom BIOS be able to fix this?
If there is no way to fix this would using DDR3L 1600MHz (PC3L-12800) RAM work (if it is backwards compatible with 1.5V)?
Thanks.
Note: I'm not sure if it matters, but I have upgraded my laptop to Windows 8.1 Pro x64 with a clean install so I no longer have any MSI related enhancements or software.
If you inspect Intel's data, you will notice that up to 8GB are supported, but only for DDR3-800/1066, see here:
http://ark.intel.com/products/43529/Intel-Core-i3-350M-Processor-3M-Cache-2_26-GHz
You need to force that memory to run at 800 or 1066 in the BIOS.
Similar Messages
-
UEFI GOP BIOS Request MSI GTX 660 Twin Frozr III
Hi,
Requesting GOP UEFI BIOS for Msi GTX 660 Twin Frozr III
S/N: 602-v287-04sb1210112009
VBIOS: xxhttps://www.dropbox.com/s/1eccbxdh2ysw5rp/GK106.rom?dl=0
Thanks a lotQuote from: Svet on 19-March-15, 01:07:05
use this one
https://forum-en.msi.com/index.php?topic=251786.msg1447440#msg1447440
Thank you! it works) -
Request MSI A6200/CR620 disassembly guide
I mainly need it for a keyboard replacement on an MSI A6200 i5-430m, but I'm pretty sure the CR620 works for it as well.Regardless it'll be good to have since I own this device. Thanks.
you can use this disassembly guide:
https://forum-en.msi.com/index.php?topic=180786.0 -
[BIOS REQUEST] MSI 270X Hawk 2GB
Hi! I have a problem with a newly purchased MSI 270X Hawk 2GB. I have tried it in the following PCs:
PC 1
Main Board: Asrock Z68 Extreme3 Gen3
Bios Version: 2.30 (newest)
Video Card: MSI 270X Hawk 2GB
PSU: FSP ATX-400PNF
12v rail Rating of listed PSU: 12V1: 18A, 12V2: 18A
CPU: Intel Core i5-2500K 3.3GHz
Memory: 2 x KINGSTON 8GB HyperX XMP Blu DDR3 1600MHz CL9 [KHX1600C9D3B1K2/8GX]
SSD: Samsung 830 64GB (Tried with a Samsung HD502HJ HDD too, on a fresh Windows 7 install, same results)
CPU COOLER: Cooler Master Hyper TX2
OC: No
Operating System: Windows 7 Ultimate SP1 64 bit
PC 2
Main Board: Gigabyte G41M-ES2L
Bios Version: F3
Video Card: MSI 270X Hawk 2GB
PSU: FSP ATX-350PNF
12v rail Rating of listed PSU: 12V1: 18A, 12V2: 16A
CPU: Intel Pentium E5300 2.6GHz
Memory: 2 x 2GB Kingmax DDR2 1066MHz [KLEE88F-B8NU6]
SSD/ HDD: Samsung HD321KJ
CPU COOLER: stock
OC: No
Operating System: Windows 7 Home Premium SP1 64 bit
GPU S/N: 602-V303-02SB1312000115
It works with the default windows driver in both PCs, but when the AMD driver is installed it fails after the windows welcome screen. Sometimes the screen turns blue, sometimes black/grey, and sometimes there are blue squares in lines on the screen and the PC freezes up. To get it to work again I have to boot into safe mode and remove the driver with Display Driver Uninstaller, since the normal uninstaller doesnt work in safe mode.
Drivers I tried:
13-12_win7_win8_64_dd_ccc_whql
amd_catalyst_14.1_betav1.6
MSI Graphics Driver (both from the CD and the website)
Tried with both BIOS modes. Tried in both PCI-E slots in the asrock board. The 6 pin power connectors are split between the two rails.
I also have an MSI 270X Gaming 2GB, and it works in both PCs without issues. The previous owner updated the BIOS on that one.
I know that the PSUs are far from optimal, but they had no problems with the 270X Gaming on full load or my previous GTX275, even when I overclocked the CPU and had 4/5 hard drives in there. The PSU upgrade (XFX Pro 850W) is on its way, but it is still around a week or more until it arrives.
Here is the current bios:
www5[DOT]zippyshare.com/v/31736342/file.html
Picture of error screen:
I would like to try flashing the newest bios to see if it helps.
Thanks in advance.Quote
Here is the current bios:
www5[DOT]zippyshare.com/v/31736342/file.html
Quote
Here is the other BIOS:
www8[DOT]zippyshare.com/v/10284353/file.html
Both come up with: "File does not exist on this server"
None the less >>this<< is the latest
TV303MH.131 is normal vbios, TV303MH.141 is LN2
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (131_141.rar) and put the included file (TV303MH.131 or TV303MH.141) on that stick.
Rename TV303MH.131 / TV303MH.141 to 131.rom / 141.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 131.rom (or 141.rom) [ENTER] and let it flash the vbios. -
UEFI/GOP Bios request MSI N680GTX Twin Frozr
I would like to request a UEFI/GOP Vbios for my MSI N680GTX Twin Frozr 2GD5/OC
S/N:602-V282-080B1303004064
NVIDIA Firmware Update Utility (Version 5.118)
Adapter: GK1xx (10DE,1180,1462,2821) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
Image Size : 182272 bytes
Version : 80.04.47.00.39
~CRC32 : 6A63B966
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20020000
Product Revision : Chip Rev
Device Name(s) : GK1xx
Board ID : E10C
PCI ID : 10DE-1180
Subsystem ID : 1462-2821
Hierarchy ID : Normal Board
Chip SKU : 400-0
Project : 2002-0000
CDP : N/A
Build Date : 06/29/12
Modification Date : 07/27/12
Sign-On Message : NVIDIA GeForce GTX 680
MSINV282MS.114
Thanks!Can you please let me know if its safe to go ahead with flash im receiving this messages prior to flashing
Warning: Firmware image PCI Subsystem ID (1462.2823) does not match adapter PCI Subsystem ID (1462.2821).
Please press 'y' to confirm override of PCI Subsystems ID's -
(UEFI BIOS REQUEST) MSI R7850-1GD5/OC
Hi, I have MSI AMD RADEON HD7850-1GD5/OC graphics card. Card's current vbios is not UEFI compatible. I wish to flash the latest UEFI compatible vbios.
Current BIOS: 015.021.000.000.000861
Part Number: 113-C4030400-X00
S/N: 602-V273-11SB1208141274
Where can I find the tools and flashing instructions?
Thanks.here it is
Quote
Where can I find the tools and flashing instructions?
its included in archive file, about instructions see here: [replace the names with names for your case]
https://forum-en.msi.com/index.php?topic=180359.msg1297832#msg1297832 -
UEFI/GOP Bios request MSI R7870-2GD5T/OC
Hi i really need to get UEFI/GOP vbios for my card
s/n ; 602-V274-090B1309093757
BIOS :http://www.sendspace.com/file/ksepumHere you have it: https://forum-en.msi.com/index.php?action=dlattach;topic=173534.0;attach=12076
-
Uefi Bios request - Msi n660 Ti-2Gd5/oc (wk)
I need the uefi bios as well for secure boot. When the card was purchased I had flashed it to a legacy version to run on older hardware.
S/N: 602-v284-15sb1210121036
https://copy.com/zyDBcKXrU7xFysEp <---- VbiosQuote from: flobelix on 21-October-13, 01:58:32
@xorbex: are you using the vbios provide just on the MSI card or did you try to flash the PNY as well? Although have tried using the MSI alone?
Current setup and issues
Setup
- vbios from this thread and newest mb bios as of yesterday
- msi 660ti (pny is not in the machine and has not been since before the msi vbios flash)
- stock cpu no oc
- 4x4gb corsair xms3 mem
- Samsung 840 Pro SSD (main os drive)
- 2x1tb wd black in raid 0
Issues
- when secure boot is enabled I boot to a black screen but I think its actually booing cause I can ctrl+alt+del to restart
- my gpu fan runs @ 100% until windows loads (did not do this on my previous vbios) -
GOP UEFI Bios request msi gtx 780 lightning
HELLO
i need uefi bios for my MSI gtx 780 Lightning
SN: 602-V296-07SB1311028267
thanks in advancehere is it
NVIDIA Firmware Update Utility (Version 5.142)
Adapter: GeForce GTX 780 (10DE,1004,1462,2960) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1272 bytes
IFR CRC32 : 42D632F6
IFR Image Size : 1536 bytes
IFR Image CRC32 : A8329ACE
IFR Subsystem ID : 1462-2960
Image Size : 131072 bytes
Version : 80.80.21.00.73
~CRC32 : B03F4805
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK110B Board - 20830021
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 780
Board ID : E613
PCI ID : 10DE-1004
Subsystem ID : 1462-2960
Hierarchy ID : Normal Board
Chip SKU : 300-0
Project : 2083-0021
CDP : N/A
Build Date : 09/02/13
Modification Date : 11/28/13
UEFI Support : No
UEFI Version : N/A
UEFI Signer(s) : Unsigned
Sign-On Message : GK110B P2083 SKU 21 VGA BIOS
MSINV296MS.132 -
[Bios Request] Msi 970 Gaming 4G
Hi, i have a 970 gaming with the original bios, please recive the latest bios
S/N: 602-V316-050B141204XXXX
CheersQuote from: flobelix on 22-March-15, 17:38:54
That NV316MH.184, latest is NV316MH.186:
https://forum-en.msi.com/index.php?topic=184740.msg1456331#msg1456331
OK, many thanks. -
Bios Request MSI 290x Gaming 6gb
having 2d flickering issue
Model : MSI 290x Gaming 6g
s/n : 602-V277-40SB140207XXXX
https://docs.google.com/file/d/0B9GxiL1WEqdeMHVUNDdzcHlNaWc/editthere not updates for this card, you can ask msi here for it >>How to contact MSI.<<
else you can try to turn off cpu core parking http://bitsum.com/about_cpu_core_parking.php
and to check if that helps -
UEFI GOP BIOS REQUEST MSI R9 280X
Current BIOS: datafilehost.com/get.php?file=52d8a458
S/N 602-V277-38SB1401101486Quote from: kapel on 27-February-14, 04:47:31
So i have sended the card to the retailer for rma and now they are saying that the card has no problem When i had the card i've tested it for 1 week and had a lot of problems, now they say the card is fine.... Is this even possible?
Sounds like something ocuk you would say
But still -
can You send me custom bios for my gt725? I am looking for latest bios suitable, providing best performance ? what changes will it do?
thank youHello
best performance is too vague, do you looking for something more specified? -
UEFI/GOP BIOS request MSI N770 TF 2GD5/OC
I just bought a GTX 700 the S/N is 602-V282-28SB1308027740. I was seeing if there is a newer BIOS version out there. Currently BIOS 80.04.C3.00.20 (P2005-0000).
On a side note my HDMI port doesn't appear to be displaying. I'm having to use the DVI to VGA adapter to display on my monitor. Thanks for any help.here it is
-
UEFI Bios Request for MSI Twin Frozr III HD 7950 O/C Non Boost card, has 7970pcb
Its this one Version: 015.020.000.000.001083 You make this forum far to complicated to navigate for old people , could not figure out how to insert an image, and you can't post external links either. So i linked the bios version, great cards by the way i have two of them, purchased a new motherboard that supports UEFI so I wanted to try. Thanks. More info:
GPU Device Id: 0x1002 0x679A
113-C3861300-X01 113-MSITV277MS.202 TAHITI B0 PROH C38613 GDDR5
3GB 500E/150M
(C) 1988-2010, Advanced Micro Devices, Inc.
ATOMBIOSBK-AMD VER015.020.000.000.001083
C3861300.101 PowerTune Limit: 175 to 260
CCC Overdrive Limits
GPU Clock: 1100.00 MHz
Memory Clock: 1575.00 MHz
Clock State 0 Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Boot Clock State 1
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Optimal Perf Clock State 2
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: UVD Clock State 3
Core Clk: 300.00 MHz
Memory Clk: 150.00 MHz Flags:S/n : 602-v277-05sb1205073711 first card S/n 602-v277-05sb1206017147 for Msi Twin Frozr III Hd 7950 o/c regarding UEFI bios request.
Maybe you are looking for
-
Call a function module from within a sapscript form
not being an ABAPer i have the task of changing the Invoice SAPScript form. i have made the necessary changes - just about... but they have asked that i include the VAT Number on the Invoice.... not too bad apart from different company codes have dif
-
Any program for blocking unwanted calls pls.
-
Trouble invoking Axis service with multiple parameters
Hallo Java experts, I have a problem with Axis 1.2RC2 (and Tomcat 5.0.19, JDK 1.5, Win XP) that might be quite simple, but I'm not so experienced and running out of ideas. Everything works fine as long as I use a single Parameter. But I can't invoke
-
How to change Moving average price in accouting view at valuation cat level
Hi, We are loading Material Master data for one client. We are using LSMW to load this object We have uploaded u201CMoving Price (MBEW-VERPR)u201D in Accounting 1 view at valuation category level. Unfortunately incorrect value has been loaded Is it p
-
After succesfully importing my PP project into AE and adding effects, I realised that all clips in PP which had speed/duration adjustments resulted in blank black screens after rendering out on AE. I then imported the AE composition into PP as a new