BIOS SETTING, need help! MAXIMUM PAYLOAD SIZE? NEO4 PLAT SLI

Hi everyone, this is my first post here, and hope someone will help me out.  I've searched the internet, posted on other websites and no one can help me with this question.  What does MAXIMUM PAYLOAD SIZE do?  What is the correct setting for this?  Curruntly I have it at 4096, but what should it be at?  Thanks everyone.

Thats a good one (question)... as far as I know it could be similar to the old AGP Aperture Size, but the amount of data doesn't correspond; megabytes vs. kilobytes.
It could be the logical data unit which is carried thru the PCI-E bus in order to feed the PCI-E devices, this is sounds better yet again would be something similar to the AGP Aperture Size: not amount of data being mapped at physical memory, but the size of the data units being transfered.
Hope this helps... try the values to either side and test with a 3d Benchmark, if you see a diference then come back and tell us.
Good Luck.

Similar Messages

  • Can anyone explain this bizarre Neo4 plat/sli circumstance?

    Just had mobo upgraded to Neo4 plat/sli. I only have IDE drives in the system currently. They are PHYSICALLY connected in this way:
    IDE socket 1 cable
    master - 80GB HDD, empty drive
    slave - DVD burner
    IDE socket 2 cable
    master - 120GB HDD, OS installed here (WIN XP PRO SP2)
    slave - 120GB HDD, data resides on this disk.
    HOWEVER...
    The drives are being recognized at bootup in this way:
    Primary Master - 120GB HDD with OS (physically on IDE socket 2 as master)
    Primary Slave - DVD Burner (physically on IDE socket 1 as slave)
    Secondary Master - 80GB HDD (physically on IDE socket 1 as master)
    Secondary Slave - 120GB HDD with data (physically on IDE socket 2 as slave)
    Further, the WIN XP disk management utility shows the drives in a similar manner:
    Disk 0 - 120GB w/ OS  (drive C:)
    Disk 1 - 80GB  (no drive letter)
    Disk 2 - 120GB w/ data (drive E:)
    DVD burner - (drive D:)
    How can this be? I thought that to show as primary master, a drive must be connected to IDE socket 1 as master? And how in the world can the Primary master and slave drives reside on two different IDE cables?
    I didn't do this installation and cannot talk to the tech who did until Monday. FWIW, everything is working just fine. And it all appears to be jumpered properly. But before I go about the process of loading up all my software, etc., I feel a need to understand why this is happening. Is this a function of a bios setting that I can't find?
    Can anyone help?
    Thanks so much!

    Well, in the first place welcome to the forum, secondly what you present it's correct, the system drive (OS drive) it has to always be the drive C: that's not a question of Master and Slave because if you go to the system properties you will see those drives as they are configured in the BIOS.
    But for me that is a strange configuration....
    Be well....

  • MOVED: K89 NEO4 PLAT/SLI Do I have to send it back?

    This topic has been moved to AMD64 nVidia Based board.
    K89 NEO4 PLAT/SLI Do I have to send it back?

    No worries.
    As for the Bios flash all you need to do with a newer core top get it to come up for posting or Bios Adjustments/Flashing is to use a single Stick of RAM. That forces the CPU's Memory Controller into single channel and that will get it done. If you try to post in dual channel with older Bios's that do not fully support a newer chip it will lock and you need then just to remove all RAM except from Slot 1 and reset the Bios as per your user manual.
    No worries as it is not as hard as it sounds.

  • Neo4 plat SLI raid configuration

    I made a striped raid config from my 2 160gig SATA drives in SATA 1 and 2. but when i tried to install windows on it, it didnt recognize the raid config and saw it as 2 seperate hard drives. I tried SATA ports 3 and 4. and it made no difference. then i tried 5 and 6. but it uses an old raid controller and it worked fine and i installed windows on it. BUT, im about to reformat and i want to use the newer raid controller. I have the MSI neo4 plat SLI mobo.  But i saw that my mobo came with 2 floppys and i only installed 1 of the floppys during windows install... do i need to install both of them? I guess that might be why it didnt work... but can anyone assure me thats the problem? I didnt think i needed both of them...

    Quote from: lupolian on 13-February-05, 06:09:50
    I made a striped raid config from my 2 160gig SATA drives in SATA 1 and 2. but when i tried to install windows on it, it didnt recognize the raid config and saw it as 2 seperate hard drives. I tried SATA ports 3 and 4. and it made no difference. then i tried 5 and 6. but it uses an old raid controller and it worked fine and i installed windows on it. BUT, im about to reformat and i want to use the newer raid controller. I have the MSI neo4 plat SLI mobo.  But i saw that my mobo came with 2 floppys and i only installed 1 of the floppys during windows install... do i need to install both of them? I guess that might be why it didnt work... but can anyone assure me thats the problem? I didnt think i needed both of them...
     YOU HAVE TO INSTALL BoTH DRIVERS ON THE NVIDIA FLOPPY,THE RAID  DRIVER AND THE MASS STORAGE DRIVER. HIT S TWICE TO DO IT. The other floppy is for the silicon image drivers,dont use it unless you use ports 5 and 6.

  • MOVED: Neo4 Plat/SLI + Winnie.. Is MSI a respectable company? How can I trust them now?

    This topic has been moved to Overclockers & Modding Corner.
    Neo4 Plat/SLI + Winnie.. Is MSI a respectable company? How can I trust them now?

    It seems strange that after you simply swapped a heatsink that your mobo blanked out.
    Fiirst, you should check to see if your power supply is still working.
    Second, if you psu is working, you need to go to the simpliest setup....1 vid card, 1 hard drive, 1 floppy, 1 stick of ram, etc and see if you can boot...just my 2 cents.   

  • Neo4 Plat SLI & geforce 8800 GTX

    Can anyone confirm if the geforce 8800 GTX will run in a Neo4 Plat SLI? The last bios mentions support for the GX2's but no new updates for the 8800 series.

    Quote from: Biggs25 on 17-November-06, 13:48:05
    Can anyone confirm if the geforce 8800 GTX will run in a Neo4 Plat SLI? The last bios mentions support for the GX2's but no new updates for the 8800 series.
    Tested it and it works  You might have to fiddle around with the cooler a bit - There's a capacitor next to the PCIE slot wich is in the way
    Only 1 card tho, you can't run SLI on this board as the 8800GTX requires a full x16 slot and won't work on a x8 slot
    so x8 - x8 SLI won't work.

  • Using the "silicon controller" on the MSI NEO4 PLAT SLI, quick question!

    I have a stable OC w/ my FX55 (261x11) 2.87GHz, but now I want to use the Silicon Controller, and not just my NVIDIA controller. Does the MSI NEO4 PLAT SLI "LOCK" the silicon controller, so since my FSB is OC'ed, I dont want any problems.... By not using all 4 ports on the NVIDIA controller, will this maybe "relax" the nvidia controller, and not let it work so hard, or does it not matter. (overall speed wise)

    Quote from: newls1 on 12-April-05, 08:06:00
    I have a stable OC w/ my FX55 (261x11) 2.87GHz, but now I want to use the Silicon Controller, and not just my NVIDIA controller. Does the MSI NEO4 PLAT SLI "LOCK" the silicon controller, so since my FSB is OC'ed, I dont want any problems.... By not using all 4 ports on the NVIDIA controller, will this maybe "relax" the nvidia controller, and not let it work so hard, or does it not matter. (overall speed wise)
    All of the PCI-E devices are locked, so that includes the SiI3132 controller and the Marvell Gigabit NIC.    One note, it's best to use the SiI3132 "last".    AnandTech did a benchmark of the two controllers, and the onboard nVIDIA controller was faster, although the 3132 PCI-E controller was much faster than the competitions use of PCI based SiI3112 controllers.   If you've already used your nVIDIA controller for 4 SATA or SATA II devices, then by all means use the SiI3132 without overclocking fear.

  • Need help in analyzing size of a table

    Hi,
    We have a table DUMMY_TABLE which has a clob column. We need to reduce the size of the table by updating the clob column. The table statistics before updating the clob column is showing 2MB of size as mentioned below. After we run the update script to update the clob column, the table statistics are as shown below (table size increased to 33MB). Can you please let us know, why is the table size getting increased after the update script.
    Note: Before the update script the clob column has even bigger data.
    Before running the update script:
    Table Size - 2 MB
    Blocks - 256
    Extents - 17
    After
    running the update script:
    Table Size - 33 MB
    Blocks - 4224
    Extents - 48
    The query which we run to get the statistics is: “SELECT * FROM user_segments WHERE segment_name LIKE 'DUMMY_TABLE'”
    Update script for updating clob column is:
    DECLARE
    data1 clob;
    BEGIN
    data1 :='Dear <%UserFirstName%>,
    Below is the password you requested for the <%Company Name%>.
    Password: <%xxx%>
    To access the login page of the <%Company Name%>, please click on the following web-address:
    <%ApplicationURL%><%UserIdentificationValue%>
    If your email software does not support web links (i.e. clicking on the web-address does not take you directly to the <%Company Name%>), copy the above web-address into the "Address" or "Location" bar of your Internet web-browser in order to access the CareerTracker.
    Sincerely,
    Human Resource Department
    <%Company Name%>
    This is an automated email; please do not reply to this email address.';
    UPDATE DUMMY_TABLE SET data = data1;
    END;

    Take the statistics of the tables and check again.
    begin
    DBMS_STATS.gather_table_stats(ownname=>'syslog',tabname=>'logs');
    end;
    Regards
    Asif Kabir

  • PhotoShop Elements 10...I need help with font size for watermark in Processing Multiple Files.....

    I have PhotoShop Elements 10, and I am trying to watermark some of my photos, I have successfully added them one at a time with a font large enough to be seen. Now I am trying to add it using the "process multiple files" , I can do that but the font even at 72 the largest setting is so small on the photo you can barely read it! Can anyone help me the size larger on my photos?

    Thank you, Michael. I just watched the Russell Brown video again for CS6 and looked real closely at his settings in ACR and he was using 240ppi. I changed my file in image size to 240 ppi and then ran the script and the layer didn't change size this time when I ran the script.
    It is kind of annoying to have to change the image size everytime I want to run this script and then change it back again as most of my files are 300 ppi. I used to run his script for edit in ARC in CS5 and recall that if I just remembered to change the settings in ARC to 300 ppi while the script was playing and before pressing 'open' that the image wouldn't change size during the raw processing, but this doesn't seem to be working in CS6. Do you know of a way to use this script and not have to change the ppi for the image to 240?
    Thanks again.

  • Beatles Box Set- Need help

    I thought I could redeem the code on the Beatles Box Set card on my Iphone and download some songs on that and have the documentaries and videos uploaded onto my computer once I sync'ed my phone to my computer but now i am having troubles. I redeemed it on my phone and nothing happened. I tried redeeming it on my macbook and it says the code has already been redeemed. So, I need help. What should I do? Thank you

    You can only redeem a code once. Try the "Check for Available Downloads" command under the Store menu in iTunes on your computer. That should get the rest of the content, if it wasn't downloaded to your iPhone previously.
    Regards.

  • NEO4 Plat Sli SIL3231 Raid problem - Can't boot after BIOS Flash!

    Hi, I have and Neo4 Platinum SLI. I had "the problem" a while back with the nVida raid where there was a hang on shutdown. I then created a RAID0 using my two Rators on the SIL3132 controller, and have three hitachi drives hooked up to SATA1 - SATA3. Back then, I had trouble getting my SIL3132 array to be the main boot volume. I could boot when no other drives were attached, but as soon as I attached them, I get the boot disk error after post. Somehow I got it to work, but not think this time, I flashed the BIOS and ran into the same problems, as the BIOS got reset.
    First, I went in and re-enabled RAID on the sil3132 controller, and change the boot order to have the RAID voluime be the first boot device, and my other drivers be the next on down the line. Upon rebooting, my system hangs after verifying DMI pool at a blanksscreen for 5 - 10 minutes then gives my the "missing HAL.dll error". if I go back into the BIOS and disable SATA1/SATA2 and SATA3/SATA4 my computer boots just fine. I even completley disconnected my three drives an my system boots just fine. I have searched these forums and could not find anything close to my issue and wondered if it is something I am just missing in the setup. I will say that at POST my IDE devices has always read:
    IDE Primary Master [None]
    IDE Secondary Master [None]
    IDE Primary Slave (my first DVD/R drive)
    IDE Secondary Slave (My second DVD/R drive)
    IDE Third Master (a 250gb drive)
    IDE Fourth Master (a 250gb drive)
    IDE Fifth Master (a 250gb drive)
    IDE Sixth Master [None]
    Is this normal? all my hard drives are SATA. the raptors and three SATAII drives.
    Any help would be greatly appreciated. Since the Nvida raid problem seems to have been fixed (as far as I read) I would like to go back to using the nVidia raid controller. I just need to back up my system first!
    Thanks in advance.
    J 

    Jkmet,
    I have noted the same problem, with a USB Pen drive.
    If I leave it plugged in and shut down, the next time I cold boot it tries to boot for the pen drive.  What I found out the any time you add a drive before booting the BIOS places it at the top of the Hard Drive Priority list making it the boot drive.  Same thing happens when I plug in a new SATA and does not mater where it is connected.  So, what I have to do any time you add a drive with the power off you have to boot to BIOS reset the Hard drive priority list, then save, exit and reboot to boot from you windows drive.
    I am sure this is a BIOS Bug, but MSI states that the way it should would work.
    Roger
    When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings.  It is almost impossible to estimate what your problem is without knowing something about it. Here is the link to the web site.

  • MSI Neo4 Plat SLI. Help with sli setup (rma time)

    Hi everyone.
    I'm new to the sli world. I am having an issue with setting up the second video card. Runs great with one card as soon as I install the second card and try to play a game or run 3dmark03 the screen goes blank and the system reboots. I reversed the sli card made sure it was seated good, enabled the nvidia settings to dual cards.
    Is there a bios setting? I might be missing or something. Please help this newbe, I'm getting frustrated.
    Thanks.

    Anyone?????? I am going to RMA this sucker.....Updated to 3.30 and now it doesnt see the other video card. try to shut down and it reboots....aaaahhhhhhgggg     .......Can not get a hold of MSI tech support (Non existant).....Hmmmm should tell me something.
    Sorry for venting

  • Neo4 Plat/Sli Dual PCI x16 or Dual x8

    I'm a little confused about my motherboard (K8 Neo4 Platinum/Sli)... on the specs written on the box i can see "Dual PCI-E x16"... in the way that i understand that is... that i have 2 pci-e ports with x16 bandwidth on every port...
    The usuer's guide says "The mainboard provides two PCI Express x16 and three 32-bit PCI-BUS"
    This is true...??
    2 x16 pci-e = 32 PCI-E lanes for graphics or 2 x8 PCI-E = 16 PCI-E lanes for graphics 

    There is only 20 pci-e lanes in total on nforce4 .
    Dual x-16 in this explanation means the it has two physical x-16 slots .
    On delivery the sli card/switch is mounted so the first 16x pci-e port has 16 lanes and the second 16x port 2 lanes .
    When it's set to sli mode it reorganizes it to 8 lanes on each of the two slots .

  • Last night to get this right or it gets rma'd k8n neo4 plat/sli

    Here is pics of the benchmarks and test programs of my system.  The specs in my sig .
    This system will not post with a pci-express card, and will with a pci card.  It has posted and then just never came back on .  Please desperate,  will try any suggestions ?
    http://www.clubeclipse.org/page2.html
    http://www.clubeclipse.org/page3.html
    http://www.clubeclipse.org/page4.html

    ok  sli card is pointed right way,  pci-express card has been changed and still same sometimes the dlite says memory error and sometimes 1 and 4 are red. 
    Is there any other bios setting s or anything for sli.  I have sli card positioned to non-sli
    just trying other while wating for rma number but I think im getting closer
     

  • Proxy Maximum Payload size

    Hi ,
    What is the maximum size of payload a proxy ( ABAP server/client) can handle in XI?  Also send me docs on Proxy Sizing ?
    Regards,
    Praveen Kumar

    Hi,
    I don't think there is any limitation of the size of payload.
    You can refer to these guides.
    SAP XI sizing guide
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/72e2bb90-0301-0010-e883-c390ad8a975a
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/150ac490-0201-0010-0cb3-dee8d5262778
    Check this -https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/150ac490-0201-0010-0cb3-dee8d5262778
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/72e2bb90-0301-0010-e883-c390ad8a975a
    Here is a presenation from SAP -https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
    Check this thread discuss the same
    XI SIZING
    XI sizing
    Check out these links on Sizing. can you also explain, how you managed to make the configurations for so many senders/ receivers. It would be helpful.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/423f5046-0a01-0010-2698-b2dc7c3185f1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b54994-f569-2a10-ad8f-cf5c68a9447c
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4dc9381e-0a01-0010-c692-f6bf424b0b94
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c02b4fc0-be11-2a10-4984-9713585ca128
    Regards
    Aashish Sinha
    PS : reward points if helpful

Maybe you are looking for