Bios setup utility

I am having problems with my y510 ersion 06cn25ww. For some reason it is stuck on the bios setup utilities and I don't kow how to get out of it. I was getting updates and for somereason the next time I started it up this is where it is. Please help me.
Thank you

Welcome to the forum!
That's good news that you found a solution - can you share it with others here in case they run into the same thing?
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Similar Messages

Bio setup utility screen

Hello I have a gray and blue screen with all this stuff. Stuck in that dreadful bio ultilty screen. How to I get my hp mini 1101 to work and take me to a normal screen! Finally moved on and get a Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key. What is this. If I am not in that screen I am in the bio scree blue and fray and and I have no idea what select or how to just get this to work. Thanks.

Hi Bobbydrake57,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums. You could check the device options on the HP Mini by click F9 at startup for Boot Device Options.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I am running the autotest of hard disk using the BIOS Setup Utility.Test Finished: Failed.

On the test status I received follow message: 5 (completed with the electrical element of the test failed). Should I have a hard disk problem ?

On the test status I received follow message: 5 (completed with the electrical element of the test failed). Should I have a hard disk problem ?

I need BIOS setup for 5005-S504

Hello,
I no longer have the original disks, the laptop was OFF for 8 years and the CMOS battery was dead. Windows was corrupt and I installed Win Vista. I need to access the BIOS but the Win XP HardWare utility download won't run in VISTA. Hitting ESC when it boots doesn't work. F2 doesn't either.
How can I access the BIOS setup screens? Is their a reset button somewhere on the motherboard?
Any help appeciated.

Satellite 5005-S504
You might try one of the methods mentioned in here.
BIOS Setup / BIOS settings -- access instructions
If the Esc key doesn't work, you're probably out of luck. Why Vista?
Can you boot to DOS, BTW?
-Jerry

Portege Z30 - unable to enter bios setup

Hi,
I am unable to enter the BIOS setup upon boot. Pressing F2 allows me to enter both master and HDD/SDD password (validation confirmed), but the screen freezes at the "Toshiba Setup Utility" graphics without any progress.
This problem started to appear quite suddenly, I did enter the BIOS setup several times before without any issue. The only change that happened as far as I know is a failed suspend/resume event.
My suspicion is that the laptop is now in the hi-speed boot regime. Can anyone confirm that? Is there any way to force it to normal boot at the boot time? I am running Linux so I cannot use the Windows utilities from Toshiba.

> I am running Linux so I cannot use the Windows utilities from Toshiba.
Thats bad :( within the Toshiba HW Setup you would find a setting to change the boot speed option.
> My suspicion is that the laptop is now in the hi-speed boot regime. Can anyone confirm that?
Hmm in my opinion if boot speed would be set to fast, you would not be able to press F2 and to input the BIOS password.
However, in other cases if boot mode was set to fast, you could enter the BIOS pressing firstly INS button and then F2 button
Try it out.

Won't boot after using windows Bios flash utility

I used the windows bios flash utility i found on the toshiba website for this sat a135-s2386, all looked good until reboot, now just a white screen.

Attitude is not going to get you far.
Let's try a proper system reset, and see if this helps bring the unit back. Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, if you see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, then try to boot into Windows.
Please let us know what happens. Good luck.
Mike

BIOS Flash Utility Fails with "BIOS directory cannot be found"

I download the 32-bit BIOS update 6fuj35us.exe and ran through the ThinkPad BIOS Update Utility Setup Wizard. After I click Finish I accept the option to update my BIOS. It fails to start the flashing process, with the error popup: "BIOS directory cannot be found. The utility process cannot be completed." I tried the ISO image too, it burned and booted up correctly, but I got the exact same error message when I tried to run the flash.
Has anyone been able to get over this issue?
Thank you
Solved!
Go to Solution.

I had to send my machine back for a motherboard replacement. Fortunately, they turned it around quickly, two days, as quickly as the shipping allows.

Satellite A300 : cannot boot : blocked by Phoenix TrustedCore Setup Utility

This one is a bit bizarre. We have a Tosh Satellite A300-193 Laptop (Manufacturer Code: PSAJ1E-01000XEN) purchased July 2008, which my daughter uses for work. We have Kaspersky anti-virus on it, but since its license had expired (and we didn't really like it), I was going to remove it and install Avast.
Kasperky's removal instructions involve getting their "kavremove" tool which their instructions say should be run from safe mode. So, having downloaded the tool, I pressed F8 to boot to safe mode. ...
That's when things went wrong. Instead of the typical black boot-options screen, I got a password request from "Phoenix TrustedCore Setup Utility". We have never set up a password on this machine, and I have never seen this particular screen before. After three wrong guesses (!), the machine powers off.
Now when I turn it on, it goes straight to this Phoenix password request: I don't touch F2, F12, F8, or anything. I cannot work out why it should do this, nor how I can possibly by-pass it. None of my password guesses work (of course). My daughter is a primary school teacher with a school inspection looming in a week: while she has most of her work on a USB stick, there is data on this machine she really needs. Needless to say, tensions are rising.
I have googled all evening, so I know there is no point asking about passwords. But can anyone point me in a helpful direction? I'm baffled and at a loss. Grateful for any help (or hope!).
David.
(Edinburgh, UK)

Hi,
Which steps/procedure in that other thread you linked did you do to make it boot without asking for the BIOS password?
I looked through that message briefly, and what I didn't see is that after you get it to boot, you should probably go into the BIOS and reset the BIOS settings to default.
Another possibility is that the BIOS firmware itself may be corrupted, causing it to think that there's a BIOS password set. If that's the case, you may need to try to flash the BIOS with a known good BIOS, maybe booting from floppy or CD to do the BIOS flash.
Jim

Need help to find printer setup utility

I recently bought my first Mac and have slowly been adding to it over the last couple of weeks. Today I added a new printer that I wish to connect wirelessly. The printer is a Brother MFC-3360. I installed the software that came with the printer and had the printer connected directly to the Mac Book. It printed just fine.
I then disconnected the USB cable and plugged it into the Extreme Base station. It failed to print. According to the Extreme manual, I need to open printer setup utility, located in the utilities folder in the applications folder. Then from there I need to add the printer.
The problem is, I have no printer setup utility. Is there another place where it might be located?
Any other ideas will be much appreciated. Thank you!

Found problem. Went to Sys prefs -> Printers and Fax -> removed my printer and re-installed. Works like a charm.

Why doesn't the HP printer show up in the printer setup utility?

Can't understand why the HP2100 TN laserjet printer that is networked(ethernet) via a Snow basestation does not automatically show up in my list of printers. I also downloaded HP's drivers for it.
My boyfriend's Powerbook running 10.3 is able to automatically see it, and it showed up as "shared" on my computer when his laptop is up and running. I tried Appletalk etc. He got it running using IP printing and having the IP address, but he told me it should have just showed up.
I'm new to the Mac so I don't understand this. According to the config page he printed Appletalk is active on the printer its selected on my networking page.
Any help apprciated.
Macbook Mac OS X (10.4.8)
Macbook Mac OS X (10.4.8) printer setup utility v 4.6

Try to check here.
http://docs.info.apple.com/article.html?artnum=303593
http://www.mac.com/1/learningcenter/Modules/LHTSolve_t4.html

HP Laserjet 6p is not recognized in Printer Setup Utility

I bought recently used HP Laserjet 6p printer and connected my PB to it's Apple Talk port via AsanteTalk Box. After I installed the HP 6p printer driver (downloaded from the HP site) I've tried several times to find the printer in the Printer Setup Utility but it doesn't appear on it! I've even downloaded a printer driver for MacOS 9 and tried to print in Classic environment but can't find any HP printer in the Chooser. Is there any solution for this problem?
I'll be very thankful for any suggestions.

Apple included the Gimp-Print driver "HP Laserjet 6 Series" for that printer. Does that show up?

Printer does not show in Rendezvous in Preinter Setup Utility

I am using a G4 Ti 15" laptop usually connected wirelessly to an AirPort Extreme BS. Also connected to that BS is a desktop (ethernet), cable modem, and a HP LaserJet 2200 printer. If I connected the printer directly to the laptop, it prints. However, if I try to print wirelessly, it doed not work. In the Printer Setup Utility when I try to add a printer and select Rendezvous, the printer does not showup in the available list.

Erven,
Have you followed these instructions from the help pages of Printer Setup Utility?
Connecting to a network printer
If your computer is connected to a network, you can use the printers in your local area, including those that use Bonjour (formerly Rendezvous), AppleTalk, and OpenDirectory.
Open a document to print, and then choose File > Print.
Choose Add Printer from the Printer pop-up menu, select the printer in the dialog that appears, and then click Add.
The dialog lists shared, Bonjour, AppleTalk, and Open Directory printers. You may need to wait a short while before your printer appears.
If you don't see your printer, click More Printers, choose your printer's type from the pop-up menu in the dialog that appears, select the printer, and then click Add.
If the specific type of printer you're using is listed, choose that type. For example, if you're using an Epson AppleTalk printer, you may be able to choose Epson AppleTalk.
If you choose AppleTalk, another pop-up menu appears that lets you choose the AppleTalk zone for the printer.
When you select your printer in the Add Printer or More Printers dialog, Mac OS X finds the printer's driver and adds the printer to the Printer pop-up menu. If Mac OS X cannot the printer driver, "Driver not Installed" or "Gimp-print" appears in the model pop-up menu.
If you still cannot find the printer, it may be an IP printer, and you will need to follow the instructions for how to set up an IP printer.
Usually, your computer can detect whether a printer has special accessories installed, such as additional paper trays, extra memory, or a duplex unit. If it can't, a dialog appears that lets you specify them. Make sure the settings in that dialog accurately reflect your printer's installed accessories so you can take full advantage of them.
See also
Connecting to an IP Printing network printer
I can't print to a network printer
Good Luck
SF

Epson 4800 Ethernet IPP Network Cant Add PRINTER SETUP UTILITY

Greetings!
Any known issues?
Does anyone have this working??
I am having a time TRYING to ADD a new Epson 4800 printer, Epson Ethernet card onto new Mactel laptop and new quad G5 (both 10.4.7).
Epson NetConfig Utility sees the printer and set an IPP address.
However, Apple PRINTER SETUP UTILITY Add IP printer isn't working.
I had qualified Epson support taking me through the steps...he said some issues with the Intel books, but that doesn't explain why the G5 isn't working.
Three hours yesterday and I'm back on it later today...any tips/info appreciated.

Hi all,
I recently bought an Epson Stylus DX4850 and I'll be damed if I get the thing installed on my Intel based Mac! This is driving me mad, I've been told that it is compatable. I've downloaded all the drivers from the Epson website but when I go to add the printer it's not listed. Does this mean that I need to use a different driver or gimp driver?
Any help would be greatly appreciated and would prevent me from going insane!
Many thanks, Jon
Mac OS X - Intel Mac OS X (10.4.7)

No drives shown in printer setup utility

Accidently erased printer drive for Hp deskjet 935c, when I went into printer setup utility app there was no drivers displayed even when I hit "more printers" still no divers were shown. I thought somthing wrong with printer setup utility app so I reinstalled it using Pacifist still no change. Need help soon kids on my back to use printer.
Mac OS X (10.4.7) imac 500

That was the next question. I just went through 5 hours of frustration with a new printer and cable on a Canon MP780. The cable was bad. It works great with a good cable.
MJ

CAN'T GET PRINTER TO ADD IN PRINTER SETUP UTILITY

I've recently purchased a Epson DX4850 printer for use on a Mac using 10.3.9. I installed without problem and it worked fine for first 4 days. Then the driver seemed to disappear. I tried to readd through printer setup utility but it came up with message "SERVER ERROR SERVICE UNAVAILABLE". I tried reinstalling, redownloading driver from Epson website, deleting prefernces and reinstalling but it wouldn't work.
I don't get the message anymore but when I try to add printer it says its found printer driver do I want to refresh the screen but then when I click ok nothing happens.
Under Epson USB it's blank and under USB it has Stylus driver with a ? and not installed.
I've had the printer checked and that works fine.
CAN ANYBODY PLEASE HELP ?

Sorry Hirsty I can't help but just to go on the list that I"m having similiar problems with my Canon ip4200. I'm running 10.3.7 and can't even find the drivers even though I've installed them from the disc and then from a download. Still won't show up.

Bios setup utility

Similar Messages

Maybe you are looking for