BIOS - System Information, Model: Can it be Changed?

1. On an EliteBook 8470p (BIOS 68ICF), can BIOS 68ICE be written to it instead?
2. If so, will that change the Model Name as seen in BIOS System Information to read "ProBook 6470b" or will it still show up as an "EliteBook 8470p"
Follow-up question: can a ProBook 6470b Motherboard be installed in an EliteBook 8470p chassis?

Hello e-lumino,
Welcome to the HP Forums!
I understand you would like assistance with your notebook. However, this is a commercial notebook, so you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
Thank you and have a great day!
Mario
I worked on behalf of HP.

Similar Messages

  • When I right clock on a song from my library and I click on Obtain information, I can't make changes on the infos, Everything is wriiten in pale letters. Olease help. Thank you.

    Can anyone help me withis. When I right click on a song from my library and I click on Obtain information, I can't make changes on the infos, Everything is written in pale letters.  Thank you.

    Short answer:
    Click Hide Song(s), it is what you wanted to do...
    Long answer:
    iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
    If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
    Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
    To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
    tt2

  • Enabled system information but can not see it in the status bar

    I can not see the system information in the status bar even though it is enabled. I currently use B1 2007 SP0. How would I go anout fixing that.

    Hi ,
    Is this issue across all client  or  one  machine.  If this is on only one client. Try re-installing the SBO- client.
    Make sure after several attempts still you are not able to see the systeminformation.
    I'm sure SAP will have not missed this in any patch release.
    Regards,\
    Rakesh N

  • How can I correct System Information.app 10810 error

    I am running Mavericks 10.9.3 on my late 2012 Macbook Pro.  I used to be able to run System Information; however, now when I run it I see an error The application "System Information.app" can't be opened. -10810.  I've poked around on the net, Googled mostly, and have not found anything specific to my issue.  Finder, btw, runs fine and I have not yet seen this error with any other app.  Can anyone point me in the right direction to research or help me correct this problem?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Envee - A versatile system information script for screenshots

    envee
    envee is a light bash script inspired by archey and screenFetch. It currently can display 4 different Arch Linux ASCII logos, along with information about the system.
    My goal is to allow for many different variations, many different options, so that every user can make the output look the way they want.
    Any system information entry can be modified, and new entries can be defined.
    Usage
    usage: envee [option]
    general options:
    -h, --help print this help message and exit
    -v, --version print version info and exit
    art options:
    -A, --Art=ARTOPT change the ASCII art
    --gallery display all possible ASCII art choices
    [~/sour] [6] $ sour --help
    color options:
    -a, --art-color=COLOR change the art color
    -l, --label-color=COLOR change the label color
    -d, --data-color=COLOR change the data color
    color choices:
    red, green, yellow, blue, magenta, cyan, white
    r,g,y,b,m,c,w
    variable options:
    -s, --set VAR=VALUE define new or existing variable
    variable choices:
    host, shell, editor, kernel, cpu, explicit, foreign, term, other
    examples:
    envee -a white -l blue -d white -s WM=dwm
    envee --art-color=magenta --set shell=zsh
    envee --set host=modula-1 --set editor=vim
    envee --Art=poison --art-color=green --label-color=white --data-color=red
    [~/sour] [6] $ sour --help
    Screenshots
    Also
    The github repo is here
    It's on the AUR as envee-git: here
    Any input would be appreciated
    Last edited by wolfcore (2012-04-08 22:24:49)

    Hi Kevin,<br />Here is another version.<br />copy/paste into a text editor then save as a .jsx and place it in the script folder.<br />The only thing you have to modify is the name of your pdf preset. I thought about a dialog where tou could have switched frome one preset to another easily. But it may much more efficient to just modify the name of the preset. If you want you an also make a copy with another PDF preset then rename it.<br /><br />ad = app.activeDocument;<br />pg=ad.pages;<br />var docpath = ad.filePath;<br />var docname = ad.name;<br />var nb = (Math.round(Number(pg.length/2)))<br />for(i=0; i<nb;i++)<br /><br />{<br />]var pgrgstart = (pg[(2*i)].name);<br /><br />]if(pg[(2*i+1)]==-1)<br /><br />]{<br /><br />]]var pgrgend = pgrgstart;<br /><br />]}<br /><br />]else<br /><br />]{<br /><br />]]var pgrgend = pg[(2*i+1)].name;<br /><br />]}<br /><br />]app.pdfExportPreferences.pageRange = pgrgstart+"-"+pgrgend; <br /><br />]var myPDFExportPreset = app.pdfExportPresets.item("your PDF preset"); <br /><br />b //enter the name of your PDF preset instead of your PDF preset<br /><br />]ad.exportFile(ExportFormat.pdfType, File(docpath+"/"+docname.split(".indd")[0]+"_"+"pg_"+i+"_to_"+(i+1)+".pdf"), false, myPDFExportPreset); <br /><br />}<br /><br />alert("done");

  • Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

    Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How to get system information on a visual composer model

    Hi,
    We are trying to build a model that will use some images, since we can not add images to the VC library we need to call the images using an URL, but the problem is that we would like to avoid to hard code the URL, since that will create a problem when we move the models across the landscape (DEV-TST-PRD) and we were thinking to use the system information to build the URL using an expresion.
    Is it possible to get the system information on VC? just to clarify if I can get the system ID (system name) that will help us to define the URL.
    Is there any other best practices to handle URLs without hard coding them?
    Thanks for your help,
    Zareh
    Edited by: Zareh Vazquez on Aug 25, 2009 11:41 AM

    You can add images to yoru VC solution model directly by selecting from the tools menu --> Image Manager then loading yoru images.
    You can now reference these images from within your model as variables. Two controls that support this directly are the command button or image control. You will see under their propoerties values the image "tab" - you can now associate images you loaded for the Image Manger dynamically.
    If your images are large and you want to store items for your portal in an external reference (outside VC). E.g. KM repository. You can define a shorturl for it and set a hyperlink object using this from VC or use the PCD address where the object is stored.
    If you are trying to collect the portal url from R3/BI you can use the RSPOR_T_PORTAL (Maintained by BASIS) table values by using the BAPI RSWR_PORTAL_CONFIG_GET which will allow you to establish teh portal url prefix remotely.
    Trust this resolves your challenge.

  • Change ctrl+alt+s System Information keyboard shortcut

    Hello,
    since last HP update, there is this new keyboard shortcut CTRL+ALT+S that opens the System Information panel. That shortcut is also used by other applications i.e. Adobe Photoshop. How can i change/disable that shortcut?
    My OS is windows 8.1.
    I've already unsuccessfully tried the steps described in the document http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&docname=c00761879. It does not work for me because I have windows 8.1 and there is no such program as "HP Help and Tools".
    Thanks

    Use Windows System Restore to return to a checkpoint made on the date of the update. Each checkpoint will list details on the update that it was made for.
    Use system restore, not Refresh or reset. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How can I get changes on Ecore Model

    I'm keeping informations about Ecore Model. When I change something on Ecore Model tree which open with Generic EMF Editor, I want to update these informations. So I have to take changed elements on tree when I save document. How can I do that?

    I'm not 100% sure I get your question, but it looks like you refer to the "Generic EMF Editor" wheras EcoreTools is a diagram editor. You might want to ask the EMF forum : https://www.eclipse.org/forums/index.php?t=thread&frm_id=108

  • HT2513 How do you change the name of a reminder in the reminder list.  I right click and then choose "get information"  I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

    How do you change the name of a reminder in the reminder list.  I right click and then choose "get information"  I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

    Jerry,
    Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
    Hey presto, I've got the @ where it should be. Excellent.
    However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
    Very strange. I'll look at other keyboards and see where that gets me.
    Thanks,  Maz

  • Using bootcamp was installing windows xp, at the select ntfs or fat format selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error.

    using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro  10.6.8)

    Have a read here http://support.apple.com/kb/TS1722 for solution.
    Stefan

  • I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences I-Photo. Does anyone know what the problem could be?

    I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences>I-Photo. Does anyone know what the problem could be?

    Your Desktop Picture settings and Dock items are stored in the files
    /Users/your short user name/Library/Preferences/com.apple.desktop.plist and
    /Users/your short user name/Library/Preferences/com.apple.dock.plist
    in the "Preferences" folder in your user library. This looks like the system has trouble to write to these files. Check the permissions on your user library and remove the above files from your user library, then log off and on again.
    Your user library is hidden in Lion and Mt. Lion. To reveal it, use the Finder's "Go" menu. Select "Go" in the Finder's main menu bar and hold down the alt/option key, until you see the "Library"  in the drop-down menu. Double click it to open a Finder window, so you can browse the files inside.
    Regards
    Léonie

  • Change of configuration in System Information

    Hi,
    Would change of a configuration in Configuration Manager/Tools/Miscellaneous Tools/System Information require restarting ICM services?
    Which ones?
    Thanks,
    Dilip                  

    Hi Dilip,
    Its not required, Any changes done via Configuration Manager Utility, it will be updated immediately to Router Memory updated in database.
    Please have a look at the Configuration System section from the below guide.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise8_5_1/configuration/guide/icm85srvg.pdf
    Regards,
    Senthil

  • I have my Macbook Air 11" backed up in Time Machine. If I change to a 13" model, can I load this from the Time Machine?

    Currently I have a 11" Macbook Air, which I plan to replace with a 13" model. My current machine is backed up in Time machine, when I get the new 13" model can I load my backup into the new machine ?

    Hi richcloke,
    Happy Thanksgiving!  When you get your new Macbook Air, you can use Migration Assistant to transfer your user account and data from your current computer.  Here's how:
    OS X Yosemite: Transfer your info from a computer or storage device
    http://support.apple.com/kb/PH18870
    OS X Yosemite: Transfer your info from a computer or storage device
    Transfer info from a Time Machine backup or other storage device
    Transfer information from another disk on your Mac, a disk connected to your Mac, a disk on the same network, or another Mac (with OS X v10.8 Mountain Lion or earlier) connected to your Mac using a Thunderbolt cable. 
    If you’re using a Thunderbolt cable, connect the cable to the computers, hold down the T key while restarting the Mac that has the info to transfer, then follow the steps below on your other Mac. 
    Open Migration Assistant, click Continue, then follow the onscreen instructions to transfer info from a Time Machine backup or other disk. 
    Select the disk, then select what to transfer.
    Apps: Select the Applications checkbox. 
    Incompatible apps or apps with newer versions already installed may not be transferred or may not be usable.
    Computer settings: Select the Computer & Network Settings checkbox. 
    Your desktop picture, network settings, and more will be transferred.
    To begin the transfer, click Continue.
    Enjoy your new Mac!
    - Judy

  • The information of photo like date change after close it. How can'i correct that

    the information of photo like date change after close it. How can'i correct that?

    Using the Photos ➙ Batch Change ➙ Date menu option will let you change the EXIF Capture Date of the photo.
    For a single photo (or to set a group of photos to the same date and time) use the Photos ➙ Adjust Date and Time ... menu option.
    Happy New Year

Maybe you are looking for