Bios trouble .. cant access the setup P-45 neo-f(outside box) / ms-7519(sandra)
P-45 neo-f(outside box) / ms-7519(sandra)
BIOS : 64-0100-009999-00101111-081208-Eaglelake
version: 1.0
when i press [DEL] to enter the bios setup .. i get a blank screen .. and nothing more happends.
and sometimes the screen tells me "No signal input"
.. I have never been able to on this computer.
I never tried to update or flash the bios .
It would be a very slow process to get it fixed by the reseller ..probably a few month..
Maybe anyone here knows whats wrong?
and what i can do to fix it
The computer boots and operates normally .. but i want to disable the built in soundcard, to replace it with a better one.
I also want to replace the cpu with something faster.. its a 2.33ghz quadcore now .(whats the fastest cpu for this mainboard ? where can i find a list)
If i flash or reset the bios? will it autodetect the hardware, even if i still cant access the setup screen? or just make things worse
.. now it works .. its a miracle .. i figured out u u have to press del at the exact right moment at boot .. if u press it too soon .. = black screen .. too late = no signal input .. wierd design
but i still dont find this board at the msi site .. only p45 neo .. without F .. and i cant use the live update becuse of 64bit os
Quote
only p45 neo .. without F
P45 Neo-F and P45 Neo are identical.
Quote
whats the fastest cpu for this mainboard ? where can i find a list)
On the MSI Product Site for your Board:
http://global.msi.eu/index.php?func=prodcpu2&prod_no=1482&maincat_no=1&orderby=cpu_speed%20ASC#menu
Quote
its a 2.33ghz quadcore now
Must be a Q8200 then. But which one exactly? There are three different revisions. In any case, if your really have BIOS v1.0, you need a BIOS Update to ensure proper CPU Support.
Quote
P-45 neo-f(outside box) / ms-7519(sandra)
BIOS : 64-0100-009999-00101111-081208-Eaglelake
version: 1.0
Do not trust Sandra for board and BIOS Information. Please check your current BIOS Version in the BIOS Setup under Standard CMOS Features -> System Information.
Before posting another reply here, please read this:
>>Posting Guide<<
Similar Messages
-
After upgrading my WRT160N firmware, I cant access the router at all.!!
After upgrading I cant access the router at all.!!
I just upgraded the firmware to WRT160Nv2_v2.0.03.007_US_code.bin from a download.
I had the CD ver 2.00.2 build 8 on it originally. I upgraded because the router would have the DNS problems everyone is talking about both wireless and wired. I tried the all zeros 0.0.0.0 and that did not work.
Now that I upgraded, I cant get into the box at all. I dont get the log in screen. I have reset multiple times and power cycled through. The ip I am trying to get back in is 192.168.1.1
How can I get this box to respond?Are you able to ping 192.168.1.1 from the wired computer...?
Unplug the modem from the router,hard-reset the router for 1 minute,power cycle the router...Make sure that the computer is connected to the router on the Ethernet port...Now,Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1......If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security software on the computer...
If you get 4 replies then,go to start>>>run>>>and type "//192.168.1.1" and hit enter..If you are able to open the linksys setup page then,connect the modem to the router on the internet port and configure the router as per the ISP settings. -
I cant access the root share of a windows server after upgrading to mountain lion
Hi Guys,
Since upgrading to mountain lion i cant access the shared drives on our windows server. For example in a windows machine if i go to run the type \\server\ i get all the visible shares available. in my previous version i was able to do the same (obviously i would authenticate with my AD account). now when i try to access those same shares i get the message below:
"The operation cant be completed becuase the original item for "/" cant be found"
I can however connect to the shares directly for example if i connect to server path \\server\data it works ok.
I have verified my account details and they are ok - i have also disconnected and reconnected the connection.
This was working fine before the upgrade. can anyone help??well iv just managed to get to 35 gig free (just deleting iphone backups) and im now able to get past the next screen on bootcamp.
unfortunatly its only allowing me to create a new partition not delete the current.
this is leading me to think the old ones master partition has become damaged and the hard drive dosent know it exists any more.
if this is the case (please tell me im wrong though) what options do i have as i dont want to / have the money to buy another hard drive to back everything up to it with.
thanks again
gareth -
how can i fix my phone its a 4s.. disabled.. when i connect to i tunes to restore it wont allow me as it is not a trusted computer. obviously i cant access the phone to allow trust, it picks it up as my own phone but wont restore... please help!!!
Hello feeling dumb
You will need to put your iPhone into recovery mode by following the steps highlighted below.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Regards,
-Norm G. -
I've upgraded my itunes to version 10.5.x and now I cant access the istore.
How do i get this resolved??Choose About this Mac from the Apple menu and check the processor.
If it's a G4 or G5, buy a retail Mac OS X 10.5 DVD from a source such as Amazon or eBay; Apple still might have copies in stock if you phone them.
If it's an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store, install it, and run Software Update. If your Mac is compatible, you can then upgrade to 10.7 or 10.8; Mac OS X 10.7 requires a Core 2 Duo or better CPU.
(80984) -
How can I access the Setup Assistant on a new HD?
How can I access the Setup Assistant on a new HD? We had a new HD installed but it didn't show the Setup Assistant.
Did you successfully install an OS on the new hd?
-
Since downloading itunes 10.5 i cant access the itunes store. how do i fix this?
Since i dowloaded itunes 10.5 i cant access the itunes store.It justs freezes halfway. Can anyone help me?
My issue was a conflict with Xeno Pro network card. Had to update to beta level drivers for 64bit Windows 7 to resolve.
-
hello, cant access the itunes store or log in with my apple id as i get an error message saying cant connect to the i tunes store. i even attempted to download the latest ios6 which cut of. just does not want to accept my apple id
Hi Mr Lenz
I had the exact same problem yesterday when i tried to get some music from the store. The same messages appeared on my screen. I just waited for an hour or so and logged on again with no problem. I was able to download music normally. Perhaps there was a momentary glitch at the iTunes store at that time.
You might try to log on again and see what happens.
Rick -
This morning I was able to access iTunes Store on my computer and iPod 5G - and now I cant access the store at all - something about my network connections - help? ive restarted rebooted
Thank you so much for replying. But resetting my apple I'd Password seems to have done the trick. I am able to download apps :). Got me worried I even uninstalled kaspersky 2012 :( got to reinstall back
-
i brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him....but i called to tmobile, they said this phone is not a stolen one,,thet told me to contrac apple.....is apple can unlock the icloud?
Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
Please help. I have a new nano, but I cant access the iTunes store. When I click on the store it tells me I am accessing the store, but nothing happens. When I have clicked on the help function I am told my computer is not connected to the Internet, which is not correct - I usually have other sites running at the time.
Please help.
Thanks,
IonaTry switch off virus scanner and firewall.
-
HT201210 update my ipad 3 wifi+cellular to ios7 but cant access the home screen
update my ipad 3 wifi+cellular to ios7 but cant access the home screen
iOS 7 is BETA software.
As such, it cannot be discussed here.
If you are a developer, seek assistance in the developers forums.
If you are not a developer, you have no right to the software on the device and no right to support. Look elsewhere. -
5800 applications cant access the net..
in my 5800, opera mini is working fine, but no other application cant access the internet..looking forward for a solution.
Solved!
Go to Solution.Hi turtlebuster,
Welcome to Nokia Support Discussions!
Can you further elaborate on your concern? Which internet connection are you using? Have you tried using a WLAN connection to access the internet? Is there any error message? Can you access the internet using the phone browser? Can you name some of the applications you have on the phone?
We can try some basic troubleshooting steps to isolate the issue:
1. Clear your phone browser's cache. Refer to the manual for the instructions: http://nds1.nokia.com/phones/files/guides/Nokia_5800_XpressMusic_UG_en.pdf
2. Under settings, check your default access point. Make sure that you are using this access point for the other applications you are using.
3. In your phone browser, you can set the access point to "Always ask". This will enable you to choose which connection to use when using the phone browser:
Internet> three lines> Settings> General> Access Point> Always Ask.
If the above steps did not work, you can follow these steps:
1. Perform a power cycle on the phone. Turn off the phone and remove the battery for a few seconds. Place the battery back and turn on the phone.
2. You can factory reset the phone. This will not delete any personal data but it will restore the phone's default settings.
Settings>Phone>Phone mgmt>Factory settings
The default code is 12345 unless otherwise changed. After the factory reset, you can customize your settings on the phone. For internet settings, you can check with the operator.
3. Check for updates using the Nokia Suite. If none, you can try to reinstall the phone software. For video tutorials, check www.nokia.com/nokiasuite
4. If there is no progress, you can reformat the phone. This will wipe all data, thus make sure to have a backup file first to prevent data loss. You can create a backup file through Nokia Suite. To format the phone, dial *#7370# on the dialer.
Hope this helps. -
I cant access the icloud settings on ipad1
When i go into settings then try to access the icloud menu its grayed out, cant click on it!
Anyone got any ideas?
thanksWhat operating system are you running on your iPad? Your signature says 4.3.3. To check go to Settings > General > About and look at Version. If you are not running iOS 5 or higher (the current OS is 5.1.1), you have to upgrade to 5.1.1 in order to have access to the cloud.
-
After upgrade APEX to version 3.0 I cant access the link apex_admin
Hi,
I made a new installtion of OracleXE. After that I upgrade it to APEX 3.0 on this way:
- Editing the ..\apex\coreins.sql script
........ On line 573 you need to set the XE variable to 1 for XE installation:
........ define XE = '1'
- sqlplus "sys/syspass as sysdba" @apexins password SYSAUX SYSAUX TEMP /i/
- sql> @apex_epg_config.sql d:\ (the APEX-installationfiles are under D:\apex)
- Update OWA-Packages with @owainst.sql
- Shutdown und startup the database
After that I can access the link http://localhost:8080/apex, but I am not able to access the link http://localhost:8080/apex/apex_admin - I got the message HTTP 404 Page not found.
I had already drop the schemata FLOWS* and reinstall APEX 3.0, but this is the same.
And if I try this:
http://localhost:8080/apex
and login with workspace INTERNAL, I got this:
application=4050 workspace=10
Error ERR-1014 Application not found
The installation-logfile shows me no errors.
What is wrong here?
Regards,
Mark
Edited by: Eisenbahn-Bundesamt on Aug 25, 2008 1:52 PMI've only used the 3.0.1 upgrade and I can't say I had to do all those changes you've mentioned, I just used the installation guide. However I did my upgrade under Linux, you post indicates that you're using Windows (the D:\ gave it away ;-)) and I've got no experience in installation/upgrades there.
C.
Maybe you are looking for
-
Create Cursor from File with big mouse cursor
Hi All, I'd like to change the mouse cursor to a picture (.cur file) and back to normal again. With the LabView vi "Create Cursor from File" and "set cursor" VIs it works, but the cursor is limited to 16x16 pixels (it will be shrinked if I load a big
-
How to remove the negative stocks in transaction code MB51
hi experts, i have this problem, when i display this material 12345 in MB51 there is a movement type 601 created in it. now when we are processing a customized program the report that was displayed does not match with the actual stocks because of thi
-
Milestone Billing - Block getting removed before full confirmation.
Hi friends, i am facing a problem in Milestone billing. I have attached a milestone to an activity.The milestone is considered in Sales order. When the activity will be fully confirmed the BLOCK will get removed from the Sales Order & down payment ca
-
Tweening "y" and connecting movement to score
Still trying to get a bar/column to move up and down based on a positive or negative total score value. Uisng "scaleY" doesn't scale proportionately for these values. The "absolute "0" point in this scaling is the mean value for the score. I thought
-
Calling separate LSMW steps from ABAP program
Hai all, anybody know if I can call sepearte LSWM step from a ABAP programm, I only need to: Specify Files Import Data Convert Data Create Batch Input Session Run Batch Input Session Need this steps so i can provide backoffice user a tool which impor