Bios update and nothing happens
Hello all
I just brought a MSI GP70 02PE laptop. I decided to update the bios and I did. No problems at all. However, after update, when I turn on the laptop, nothing happens. The screen wont turn on and the power buttion is orange. I can hear it starts up, but nothing happens. Am I or is there a reason why it does what it?? Can I somehow undo the bios update?
Regards, HeramirDK
Quote from: JakeSully;111917
it would be better if you open laptop disconnect battery and hold power button in for aprox 30 seconds to 1 min that should kill power fully in motherboard and have BIOS reseted or something so it will make laptop boot again
Also make sure you did not flash the windows 7 bios on a windows 8.1 GS70 2PE since it even warns you on their site that cross flashing can cause you to brick the laptop so make sure you flashed Windows 8.1 bios on a windows 8.1 laptop and windows 7 bios on a windows 7 laptop
Just tried that, doesnt work. And I did use the 8.1 bios . But ill let it be over the night and will check tomorrow . Is there a battery inside the laptop I can take out?? Or is that a suicide mission??
Similar Messages
-
Everytime Firefox starts it says it will install an update and nothing happens
When I start FF, I get a message that an update is being installed, & FF will start in a moment. Then I get a grey screen with a link to learn more bout the update. When I click on it nothing happens. So I close it and FF starts in a few minutes. This happens with every start.
See:
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then best is to download the full version and uninstall the currently installed version.<br />
You may need to remove the Firefox program folder to do a clean install of the new version.
Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
Error message 3194 when trying to update ipad. help?
Follow this troubleshooting guide.
Be aware that this procedure could be fairly longwinded:
http://support.apple.com/kb/TS3694#error3194 -
Ive clicked on help to check for updates, the update I needed came up so I clicked update and nothing happened, what do I do?
Going by your profile your Mac has v10.5.8 installed. That is the most recent version available for Leopard.
You may be able to upgrade to v10.6 Snow Leopard > Mac OS X v10.6 Snow Leopard - Technical Specifications
Snow Leopard is available for purchase from the Apple online store > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
With Snow Leopard installed, iTunes would be updated for you. -
I did the software update and after downloading and loading the ATV just hung-up with a fast blinking white light on the front of ATV. Tried a reset with the remote - Menu /downkey and nothing happened. Is the software corrupt or did it wipe out my ATV?
Apple TV 1st generation or 2nd?
I would try plugging in the HDMI from the ATV to a different HDMI port on your TV and even trying the ATV on a different TV altogether...sounds like the HDMI port on your TV might be bad or a bad connection. Keep in mind you'll need to switch the TV input to the new HDMI port -
When I open Muse, I get a message that a new update is available. When I hit install it just closes and nothing happens. Then I got a message I needed Adobe Creative Cloud App to resolve the issue. I downloaded a copy of Creative Cloud desktop but it says that my Muse is up to date. It was last updated in May but you have a new update today and it will not update. I thought maybe I am not suppose to have the Creative Cloud update because all I have is the individual app Muse and the photography program. So I uninstalled the CC desktop. Then when I open Muse it says I need the CC desktop to help with the update. So I get stopped either way. Now I also had a Pre-Release Muse on my computer and I don't know if that complicated things. Please advise.
All future installs/updates of Muse (and most other Adobe apps) are through the Creative Cloud desktop app. Thus you do need to have it installed.
Are you on Windows or Mac? What OS version? -
I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I can no longer open any attachments that are sent to me. I click on and get cannot preview (but have had this for ages). I am clicking on download and nothing happens. It does not download. I clicked to install a new version after updating and clicking repair. But still the attachments won't open including invoices I have received today. It is all attachments not just pdfs.
Angela Richens wrote:
It is all attachments not just pdfs.
Then most likely it is not caused by Adobe Reader.
Anyway, perhaps someone has some idea, if you give us some details: operating system, browser, email client, ... -
Ever since I updated to the IOS 6, I no longer can play my music in the car! It is plug and play! It just sits there saying connecting and nothing happens. A couple of my friends have said the same thing. Any ideas? Help please!
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
Updated to IOS 5.0.1 and now if I tap on a game icon instead of opening the game a grayish color comes over it and nothing happens. How can I get my games to work again?
Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever. -
I just updated my iPhone 6 to IOS 8.3. My safari will not let me search anything. If I type in a website URL, the Go button is greyed out. If I type in something to search on google, I press Go and nothing happens. Does anyone know how to fix this?
I have cleared history, reset my phone, tried using wifi and mobile data.I have this problem too and have tried all suggestions to fix, with no luck.
Safari did work for a short time by switching to Private, but stopped working soon after -
Hi
I'm trying to update my apps using the creative cloud desktop app. I can't see any apps in the app tab, the wheel just spins round and round and nothing happens. Has anyone got any ideas? I've tried uninstalling the desktop app and reinstalling but it still has the same problem.
Cheers
RachelHi Rachel,
You can follow the article: App doesn't open | Progress wheel spins continually to get your issue fixed.
Let us know if the issue still persists or not.
Regards,
Ratandeep Arora -
I just updated my phone and it said connect to itunes, I plugged it in and opened itunes and nothing happened, what do I do?
Hi Millers0,
If you are having isssues with your iPhone after a software update and you are being directed by the screen to connect it to iTunes, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
I click resume on updating OS X mavericks and nothing happens,what do I do
I click "resume" on updating OS X Mavericks on my new MacBook Air and nothing happens. It shows Paused in light grey above 596 MBof 5.29GB in front of resume.I would like to clear it and start over.
The application manager provides activation and online features, so no, unisntalling is not an option or else your Adobe software would go defunct.
Mylenium
Maybe you are looking for
-
i want to send content of a input text area to particular email id pls replay to [email protected]
-
HT202157 I just ran Apple TV update now the indicator light on it keeps flashing and nothing works
How do I turn off blinking light after Apple TV update
-
Hi masters I cannot drop a user cascade, i'll get that error drop user HOMER cascade ERROR at line 1: ORA-00604: error occurred at recursive SQL level 1 ORA-24005: must use DBMS_AQADM.DROP_QUEUE_TABLE to drop queue tables I'''ve triied the work aroun
-
Table export using datapump - estimate the time to export
I aim to export the table ABC of size 300GB using datapump ( oracle 10g) I would like to know how long to take the table for export ( estimate time)
-
Multiple SigmaTel Audio files appearing in Conrtol Panel
I just bought an iPod Shuffle. I am using Windows XP. After I connected it to the computer for the first time, numerous SigmaTel Audio files started appearing in my control panel. I also have a nano which has not had these problems. I understand that