Bios update details

Where can I find details on MSI's bios updates?
There have been several bios updates for my GT70-2OC and I want to know if it would be advantageous to do the update.

Quote from: james.nation on 12-February-15, 03:46:03
Where can I find details on MSI's bios updates?
There have been several bios updates for my GT70-2OC and I want to know if it would be advantageous to do the update.
You meant BIOS update history?! There is only the latest one on the website.
BIOS X.18 version:
Description: Hidden network stack item in legacy mode.

Similar Messages

Satellite 1410-604 - BIOS update Incorrect BIOS update in the web?

Hi there again!
Now with a new and weird matter.
We all know that old say... "If it is not break, don't fix it". And if you put it into more informatic terms, "specially if it is a BIOS".
Yes, we all know that the BIOS is something quite dellitate to handle. For some reason we normally feel like if we were handling something like nitro-glycerine, or some radioactive product. And this is because we all know what is being put in risk in that moment: our (or sometimes others) computer, the full system could end as dead as some pieces of metal, plastic, and wires.
Well. I passed through all of that more than ten times in my life, and only once it went wrong. But since that old motherboard was already dead, It was not important. But I allways was EXTREMELY care. I allways cross checked everything before doing anything, allways got a backup and a way to restore that backup... and allways did this in COMPAQ systems, that were prepared that way. Updating a BIOS was just about preparing a disk, turn on the PC with the disk in the diskette drive, and wait. And if you didn't like the results, you simply click "return to previus BIOS" and that was it... very nice. And easy.
Few days ago, a friend brought me a Toshiba Satellite 1410-604 to solve some issues that were driving him crazy. After removing an expired Norton Internet Security, install avast and scan, I found more than one hundred files infected with a wide variety of virus, malware, trojans, and whatever you could imagine. Avast removed them all, but the remains of the operating system was so unstable that we decide to format and install from scratch.
I asked for the restoration disks, that obviously he don't have because they were lost in one of his movings. After we got the confirmation from Toshiba reps that there are no recovery disk available for this model, because it is too old, we decided to install from scratch like any other normal PC, and resigned to loose some of the utilities that come with that CDs and that are not available for download in the website.
I downloaded all of the software available for this model, including two BIOS updates. (Actually only one update, but in two versions: Windows and Traditional), and prepared a CD with all the drivers and programs just like if it were a brand new system install. And everything went very well, no problems at all. Until we got to the Wireless LAN card, but that is another issue that is already solved (the mini PCI card for the WLAN does not support WEP or WAP encription, and it is not possible to connect to any wireless LAN encripted).
At this point, and when I started configuring and enabling PCMCIA devices, and USB devices (this computer only supports USB 1.1 not 2.0) I discovered this text in the Toshiba Website:
"This Bios Update adds increased functionality to your system.
(BIOS is an acronym for Basic Input and Output System. This program is stored in a Read-Only Memory chip on the motherboard.
When the computer powers up, the BIOS is launched to perform various start-up functions.)
For detailed update information please refer to Toshiba BIOS-Update Information"
(you can find this here:
[http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU] you have to look for:
Archive
Satellite
Satellite 14xx
Satellite 1410-604
PS141E
Quite specific. Isn't it?)
According to the information in that same website, the BIOS available fits the following models:
"Satellite 2410-414, Satellite 1410, Satellite 1410-654S, Satellite 1410-814, Satellite 2410-303, Satellite 2410-304S, Satellite 1410-354, Satellite 2410-601, Satellite 1410-401, {color:#ff0000}*Satellite 1410-604*{color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410-S403, Satellite Pro 2100, Satellite 1410-S203, Satellite 2410-304, Satellite 1410-554, Satellite 1410-S102, Satellite 1410-354E, Satellite 2410-703, Satellite 1410-303, Satellite 2410-S203, Satellite 1410-801, Satellite 2410-603, Satellite 1410-902, Satellite 1410-313, Satellite 1410-802, Satellite 1410-714, Satellite 2410-354, Satellite 2410-514, Satellite 1410-614, Satellite 1410-704, Satellite 2410-515, Satellite 2410-504, Satellite 2410-702, Satellite 1410-S103"
Yes... it's there!
Now, when you go to the "Toshiba BIOS-Update Information", you get:
"FAQ Ref.: TRO0000000b07
A BIOS update is a {color:#ff0000}*relatively simple operation and can be carried out by most competent computer users*{color}. All BIOS upgrades can be obtained from "BIOS Update" Download Section click here..
Note: The BIOS files are machine specific so the correct BIOS for your machine must be used."
Please note that Toshiba does not disencourage the handling of BIOS, on the contrary: they even encourage people to do so. This is not necessary bad, but at the same time they encourage people to 'play around' with such a delicate matter, at the end of that same page, in little letters they say:
"Toshiba provides this information "as is" {color:#ff0000}*without warranty of any kind*{color}, either expressed or implied, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Toshiba shall not be responsible for the topicality, correctness, completeness or quality of the information provided. {color:#ff0000}*Toshiba is not liable for any damage caused by the use of any information provided, including information that is incomplete or incorrect*{color}."
This should trigger yellow alarms in our minds.
+"Human error is inherent to humans, and it is not possible to erradicate. It will allways appear, sooner or later" (Prof. James Reason).+
And finally I made the mistake. Even though I read that warning, I remembered all those successfull BIOS update with COMPAQ, and relied in Toshiba. That update was available there, and Toshiba was telling me that it was for this computer. Great!
So finally I unplugged all devices (USB), removed the PCMCIA (WLAN),plugged the battery charger to avoid any possible battery problem, restarted windows, and then from within windows I started the updater (windows version, as recommended by Toshiba). Everithing looked fine, nothing different of what I used to see on those old COMPAQs.
As warned by the updating program, the system was going to reboot. And actually it did so.
Windows closed quite normally (a bit quicker than normal, but without errors, and since there were no other programs than the essentials -even the antivirus was not running-), the computer switched of, all lights off (normal), and then it switched on again...
{color:#0000ff}*BEEEEEEEEEEEEP... BEEEP... BEEEEP...*{color}
OMG! I never espected something THAT bad. 3-1-1!
And now... What a 3-1-1 stands for here? Award BIOS would mean no video card or deffective video card, but it is not true, since it was working up to 20 seconds ago. It must be the BIOS.
It never came again to life. It is still beeping 3-1-1.
But now comes the investigation of the human-factors involved in this accident.
I found I commited the following failures:
*(1)* To rely in the manufacturer, even though they WROTE their information could be wrong or incomplete. (BAD if I were a QA&QC inspector).
*(2)* I didn't cross checked deeply enough (until it was already too late).
*(3)* I didn't looked previously for the way to make a backup of the BIOS, in order to restore should anything go wrong.
*(4)* Let Toshiba lead me to a path I didn't want to walk, just because of their offer of "increased functionality".
*(5)* Beleave in Toshiba when they said "relatively simple operation and can be carried out by most competent computer users"... they never said it is failproof.
Then I started the most interesting part of the investigation.
{color:#0000ff}*"What went wrong?"*{color}
Obviously, the BIOS update failed somehow, somewhere. And I wanted to know what and where.
First thing I discovered was that there are another search engine in Toshiba called "askiris" ([http://askiris.toshiba.com]) and I looked there in order to see if for any chance I could get the old 1.20 BIOS version that was installed originally in that machine.
And I found something... VERY interesting:
bq. {color:#800080}*From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.10 for Satellite 1410/1415/2410* \\ {color}{color:#800080}* bios for these models. TAIS. Downloads. DL. 105481 289838 289838 ACPI Flash BIOS version 1.10 for Satellite 1410/1415/2410. 2002-10-04. 105589...* \\ {color}{color:#800080}* Published 10/4/02* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415* \\ {color}{color:#800080}* FDD Version 1.30 TAIS. Downloads. DL. 105481 357972 357972 ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415. 2003-01-31. 105589 PUB...* \\ {color}{color:#800080}* Published 1/31/03 | Rating:* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.20 for Satellite 1410/2410* \\ {color}{color:#800080}* error message during BIOS TAIS. Downloads. DL. 105481 305240 305240 ACPI Flash BIOS version 1.20 for Satellite 1410/2410. 2002-11-01. 105589 PUB...* \\ {color}{color:#800080}* Published 11/1/02 | Rating:* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410* \\ {color}{color:#800080}* 1) Changed the content TAIS. Downloads. DL. 105481 330963 330963 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003-01-03. 105589...* \\ {color}{color:#800080}* Published 1/3/03 | Rating:* {color}
Those are: V110, V140, V120 and V130 for series 1410/15 and 2410.
GOOD! Or not?
Let's take a look:
First thing I did was download everything all four files.
Then I took the same version that made the crash: 1.40
Than I uncompressed the file, and I found:
06/05/2009 00:17 <DIR> .
06/05/2009 00:17 <DIR> ..
31/01/2003 08:38 1,605,632 11410v14.iso
31/01/2003 08:38 511,764 1370D14.EXE
{color:#ff0000}*08/01/2003 17:03 724,480 2410a9v140.exe*{color}
09/01/2003 09:32 250,663 biofca9t.com
08/10/2002 05:26 30,697 chgbiosa.exe
31/01/2003 08:36 1,087 instinfo.bat
13/05/2002 15:25 378,175 launcher.exe
31/01/2003 08:36 433 launcher.ini
06/05/2009 00:17 0 list.txt
31/01/2003 08:36 14,768 readme.com
*{color:#ff0000}31/01/2003 08:36 12,513 readme.txt{color}*
11 archivos 3,530,212 bytes
3 dirs 9,404,600,320 bytes libres
And I got my first surprise here: There is a {color:#ff0000}*README.TXT*{color} that was not present in the file I downloaded previously from the drivers repository.
So I went to the readme.txt and I found this:
"README.TXT 01-31-2003 CDC
Flash BIOS version 1.40 for Satellite 1410
This BIOS is applicable to the following models:
Satellite 1410-S105
Satellite 1410-S106
Satellite 1410-S173
Satellite 1410-S174
Satellite 1410-S175
Satellite 1410-S176
Satellite 1415-S105
Satellite 1415-S106
Satellite 1415-S115
Satellite 1415-S173
Satellite 1415-S174
Satellite 1415-S175
Satellite 1415-S176
Satellite 2410-S203
Satellite 2410-S204"
Please note that the model 1410-604 is *NOT* listed.
I thought "well, it must be another archive..."
But then I realized of a name that sounds familiar, it was there, in the directory where I uncompressed this 1.40 file, and the name is:
{color:#0000ff}*2410A9V140.EXE*{color}
So I took the other file, the BIOS_Win update, and I discovered that the file name is:
*{color:#0000ff}2410A9V140.EXE{color}* (Ups!)
So I uncompressed it again, to find:
El volumen de la unidad D no tiene etiqueta.
El n£mero de serie del volumen es: 8838-E175
Directorio de D:\Shared\diskette\2410A9v140
06/05/2009 00:43 <DIR> .
06/05/2009 00:43 <DIR> ..
*{color:#0000ff}09/01/2003 09:32 _250,663_ BIOFCA9T.COM{color}*
17/07/2002 03:38 35 biosupd2.ini
13/07/2001 13:22 6,277 chgbios2.vxd
*{color:#0000ff}08/10/2002 04:26 _30,697 _CHGBIOSA.EXE{color}*
09/11/2001 09:14 134 clean2.reg
17/07/2002 03:35 342,064 install2.exe
16/07/2002 06:55 241,664 nchgbios2.exe
18/08/2001 11:41 3,435 nchgbios2.sys
23/10/2001 18:55 11,476 nchgbios2NT.sys
26/08/2001 09:00 49,152 nchgbios2svc.exe
13/07/2001 17:05 49,152 tbdecode.dll
14/03/2002 06:42 49,152 TCHGBIOSInfo.dll
21/06/2002 11:25 1,796 tosclean2.bat
09/11/2001 12:01 967 tosclean2.pif
21/06/2002 11:34 1,841 toscleanAUTO2.bat
21/06/2002 11:44 1,796 toscleanSMS2.bat
21/06/2002 08:51 2,038 tosntclean2.bat
21/06/2002 08:51 2,084 tosntcleanAUTO2.bat
21/06/2002 08:52 2,038 tosntcleanSMS2.bat
20 archivos 1,046,461 bytes
2 dirs 9,402,793,984 bytes libres
No readme file...
Then another question arised in my mind: What about the other 1.40 file? What does the other 2410A9V140.EXE have inside?
This:
El volumen de la unidad D no tiene etiqueta.
El n£mero de serie del volumen es: 8838-E175
Directorio de D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140
06/05/2009 00:46 <DIR> .
06/05/2009 00:46 <DIR> ..
*{color:#0000ff}09/01/2003 09:32 _250,663 _BIOFCA9T.COM{color}*
17/07/2002 03:38 35 biosupd2.ini
13/07/2001 13:22 6,277 chgbios2.vxd
*{color:#0000ff}08/10/2002 04:26 _30,697 _CHGBIOSA.EXE{color}*
09/11/2001 09:14 134 clean2.reg
17/07/2002 03:35 342,064 install2.exe
16/07/2002 06:55 241,664 nchgbios2.exe
18/08/2001 11:41 3,435 nchgbios2.sys
23/10/2001 18:55 11,476 nchgbios2NT.sys
26/08/2001 09:00 49,152 nchgbios2svc.exe
13/07/2001 17:05 49,152 tbdecode.dll
14/03/2002 06:42 49,152 TCHGBIOSInfo.dll
21/06/2002 11:25 1,796 tosclean2.bat
09/11/2001 12:01 967 tosclean2.pif
21/06/2002 11:34 1,841 toscleanAUTO2.bat
21/06/2002 11:44 1,796 toscleanSMS2.bat
21/06/2002 08:51 2,038 tosntclean2.bat
21/06/2002 08:51 2,084 tosntcleanAUTO2.bat
21/06/2002 08:52 2,038 tosntcleanSMS2.bat
20 archivos 1,046,461 bytes
2 dirs 9,402,781,696 bytes libres
*{color:#ff0000}They both have 20 files, and 1,046,461 bytes. I asumed they are both the SAME file{color}*.
And the readme file does not list the model 1410-604 in its readme file, therefore I cannot explain this except as a mistake from Toshiba. *{color:#ff0000}They put an incorrect BIOS in their website, and suggested the update, and somehow leaded to this kind of errors.{color}*
(Except in the case that one of those models is a different name of the 1410-604 model, and if it is the case... now I don't know why this BIOS do not work with this computer).
The worst part is that neither of those other files (V1.10, 1.20 and 1.30) lists the 1410-604, therefore there seems no possible workaround for this problem. I need an original v1.20 for this CMOS, and Toshiba seems not to have it. They offered me to solve the problem, by leaving the notebook at an ASP, and paying only 95€ for the work and about 280€ for a motherboard replacement, I will get it solved. But they offer no warranty of their possibilities because is a model 'too old' and 'discontinued' and with 'no support'...
In other words, they said "don't bother with this, just go out there and buy a new one" (something absolutely out of my scope in this crisis-time) :P
Thank you for reading soooo far.
Now what I need is to get any ideas of a workaround for this, my ideas are:
(1) This CMOS has a boot-part that still works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn into the CMOS, from the VERY SAME model (a BIOS backup) but the backup must be adequate for the burning program (CHGBIOSA.COM).
(2) It is still possible that the BIOS could be OK but the data on the CMOS got somehow corrupted. If so, clearing the CMOS could solve de problem. But I was not able to find a clear cmos button from outside, and after disasembling I took of the battery, with no good results. I have to try leaving the MOBO without battery for longer period (I left it about 20 seconds) just in case 20 seconds don't allow all the capacitors to fully go to zero values. I have not much hope in this point.
(3) Try to get a REAL good update from Toshiba. I contacted several times technical support, and I was able to verify they are only phone-operators, with a script in front of them, and when the problem goes-out-of-scope they fall always in the same answer: "you have to go to an ASP". I still have a low hope to find someone who really knows a bit, and could enlighten with a good BIOS to put in this disks.
(4) As far as I could find, this BIOS is not from any known BIOS-maker. It seems it has been developed by Toshiba (own brand), therefore the Crisis Recovery Disk from Phoenix will not be of any help here. As well as any other BIOS recovery tool not designed for Toshiba's BIOS. But I'm open to any ideas, that could be tested more or less safely. (Remember that the 'BIOS-BOOT-PART' feature is still working, I don't want to loose this only possibility of redemption).
Wwwaaaaoooowww... what a long-post falks! Sorry for that!
Forgive me, but I wanted to be really clear.
Should anyone give some hints or advice, will be greatly appreciated.
Please don't say what I shouldn't do... I already know that. I already researched and already found my mistakes, in order not to repeat them. Now I need to move on, to advance, and to try to solve this, or at least learn how to solve similar things. As much as possible.
Thank you again, in advance, and sorry again.
FenixDigital
Message was edited by: Fenix_D
Changed subject to beter reflect what is the matter about (apparently erroneous BIOS file in Toshiba download center).

Well. 
 
It's not dead, certainly. 
 
The steps that I put in my procedure were: 
 
--> There are two memory sims, that I am going to identify as M1 and M2 
--> There are two memory banks, that I am going to identify as A and B 
 
Next step in order to identify if there are some module or bank that is not working properly are: 
 
The modules were installed as: 
 
M1 --> A 
M2 --> B 
 
1--> Boot without any memory chip. 
 
<blockquote>
A--> X 
B--> X 
</blockquote>
 
2--> Boot with ONE module 
 
<blockquote>
A-->M1 
B-->X 
</blockquote>
 
3--> Boot with the OTHER module 
 
<blockquote>
A--> X 
B--> M2 
</blockquote>
 
4--> Boot with BOTH modules swapped: 
 
<blockquote>
A--> M2 
B--> M1 
</blockquote>
 
5--> Boot with ONE module swapped: 
 
<blockquote>
A--> M2 
B--> X 
</blockquote>
 
6--> Boot with the OTHER module swapped: 
 
<blockquote>
A--> X 
B--> M1 
</blockquote>
 
At this point I got a great difference. It booted, finally. But in order to make a diagnostic, I have to complete the full test, and the results were: 
 
1--> Boot without any memory chip. 
 
A--> X 
B--> X 
 
NOT BOOTING Actually the computer not even tries to read the disk. Only the power led turns on, but even prior to press the 'on/off' button. I think this indicates 'no memory installed'. I would have expected a post failure beeps, but there were no beeps at all. 
 
2--> Boot with ONE module 
 
A-->M1 
B-->X 
 
BOOTED NORMALLY Well. This obviously means that the 3-1-1 beep code means memory error, or one bank failing of two installed. Now I didn't know if the problem was the module, or the bank B. 
 
3--> Boot with the OTHER module 
 
A--> X 
B--> M2 
 
NOT BOOTING Just like the condition in 1. Like no memory installed, therefore there are two possibilities: The bank B is not working, or the memory module M2 is not working. 
 
4--> Boot with BOTH modules swapped: 
 
A--> M2 
B--> M1 
 
NOT BOOTING Just like previous to test condition. Beep code 3-1-1, no boot at all. 
 
5--> Boot with ONE module swapped: 
 
A--> M2 
B--> X 
 
NOT BOOTING This was the important test, because it finally let me determine that the problem is at the module 2 (M2) not at the bank B. But still there could be a failure IN THE BANK B and IN THE MEMORY MODULE 2. Have to do the other test. 
 
6--> Boot with the OTHER module swapped: 
 
A--> X 
B--> M1 
 
BOOTING NORMALLY This really confirmed there is nothing wrong with ANY bank, but one of the modules is not working, actually is not being even detected. This is quite weird, because this computer was working perfectly with those two modules, and in the moment of the BIOS upgrade it seems to fail... How come? 
 
Something weird happened here. I don't know what, but something ruined one memory module (fortunately only one), what I would like to know now is what happened. But at least I have the machine running, with very low memory, but running. 
 
What I am thinking now is what about this BIOS upgrade makes the motherboard not to recognize one of the modules for some reason? 
 
<img class="jive-emoticon" src="images/emoticons/happy.gif" border="0" alt=":)" /> 
 
I will continue my research, but certainly the memory made the difference. 
 
I am not sure why I didn't discover this before, I think I didn't perform this test before, for two reasons: 
 
(1) I tried to boot with no memory, and this was impossible, so I assumed that the problem was not at the memory. 
 
(2) When I heard the beep code (3-1-1), somewhere I read it was a video problem, and I asume most probably it was a video problem (since no video at all was being displayed) but I should have take into consideration that Phoenix BIOS also means with the same 3-1-1 a DMA problem (memory problem). 
 
Okis... It's a pitty having to wait so much between a post and it's approval. I posted my answer two days ago, and since it didn't appear, I believe It didn't upload, so I replied again, and also didn't appeared... until now. It is obvious that a moderator approval is required. That's why I have to wait 24 hours or more to read my post. This slows this forum effectiveness. 
 
Thank you very much for your help. I'll keep you informed. Until we get to a final diagnosis and solution.

What's new in the BIOS Update v2.00 for Satellite L505-144

What's new in the BIOS Update v2.00 for Satellite l505-144
Thanks

Hi mate
As far as I know Toshiba European driver page does not provide any details what has been changed in the BIOS.
But I found some details on Toshiba US page.
It seems that Fn+N+1/2/3/4 debug function has been removed in BIOS 2.0 to avoid keyboard abnormal behavior.
Greets

Sticky - 2) How to Flash Bios NVidia 64 & Award Bios - More Detail

Sticky - How to Flash Bios NVidia 64 & Award Bios
Warning Flashing the bios can be bad for your PC's Health
DISCLAIMER:
This is a work-in-progress, not all solutions are "confirmed", use info at your own risk
Not all topics are covered, only stuff that keeps reapering in questions, or are thought to be important.
Before going ahead checkout When and how to update your BIOS
Note: Like reseting CMOS Flashing Bios will clear all any changes you made in bios & will need to be re-entered - see 12) below. So Make sure you remember/ make a note of them.
Resources:-
Floppy Images - Boot Disc.com
Simply insert Floppy & run downloaded Exe file.
Bios Saviour
IOSS Bios Saviour RD1-PMC4
Bios Saviour - RD1 Model Selection Sheet
SST 49LF040A LPC /3.3V - PMC4 For Neo3 250 & Neo4 (Thanks Arioch )
Recovery:-
MSI - Bios Recovery
Syar - Bios Recovery & Checksum Error
BIOS FAQ - How can you recover a corrupt BIOS ?
Bios recovery the dirty
way
Saving MurdoK's Bios - Syar
Offers Reprogramming/Replacement service - Cheaper than new mobo. Can't vouch for non uk service not used them. (1st off search engine)
EU Recoverybios.com
UK BiosflashUK
US Badflash.com
How to Flash MSI Guides.
There are different ways to flash the bios but to keep things simple will concentrate on the MSI Official methods :-
1) Award Flash BIOS Procedure 98/ME
This method assumes access to hd formatted using FAT32 & therefore readable by DOS.
2) Flashing the BIOS for Users using NON FAT file system
For use with Linux based & NTFS File systems - HD Not readable from DOS. Using this procedure the the files are copied to the virtual drive before running the flash utility. So the flash effectively is all done in memory.
This will be the method used by the majority of us. So:-
Follow the instructions in the last link (Thanks Bas)
The details below are additional checks/notes referring to the steps in Bas's guide, which may be useful.
Essential
2) Know Your model number - Is of increased Importance for NEO4 users - We have already seen instances of this.
5-1) Ensure you have a Boot Floppy with CD suport (this creates the Virtual drive used in the process) If you haven't got such
a boot disc see BootrDisc.com link in Rescources.
5-2) B4 booting floppy - Enter Bios & Load Optimised Defaults - To ensure that bios is returned to stock & any overclocking is
turned off.
7) If you miss the ramdrive letter the last DOS message will show your CD drive letter. The Ramdrive is the letter preceeding
the CD Drive. EG CD = D Ramdrive = C
Optional - Gives better control of procedure
11) Use of Switch command options with AWFL833C.EXE /py/sn/wb/cc/cd/cp/r TargetBios.file
Personnaly I use the switches as does Syar :-
Per Syar2003 Iv'e always used :
AWFL833D W7030NMS.xxx /py/sn/wb/cc/cd/cp/r
or
AWFL833D W7030NMS.xxx /py/sn/wb/cc/cd/cp/f/r
And a hard reset with jumper when done .
For a more detailed explanation of switches see :-
Syar's Bios Switch Explained
or Syar's Bios Collection - Flashing.txt
See Also Using a Batch File to Automate bios flash
12) after flash , enter Bios & load optimized defaults , then save + exit with no other change .
That way you have a fresh system with a fresh non problematic dmi-pool and user settings .
After this Enter Bios & Re-enter your custom settings.
From Syar - Which one do I do first?
Thanks to Bas & Syar for the majority of info in this guide

How to Flash Bios NVidia 64 & Award Bios
General:-
How to Flash Bios NVidia 64 & Award Bios
Warning Flashing the bios can be bad for your PC's Health
DISCLAIMER:
This is a work-in-progress, not all solutions are "confirmed", use info at your own risk
Not all topics are covered, only stuff that keeps reapering in questions, or are thought to be important.
Before going ahead checkout When and how to update your BIOS
Note: Like reseting CMOS Flashing Bios will clear all any changes you made in bios & will need to be re-entered - see 12) below. So Make sure you remember/ make a note of them.
FLASH PREPARATION
Always Load Optimised defaults & Save b4 flashing - NEVER FLASH When running an OC or Unstable.
If you need to flash & are worried about stability - run with a single module & test it it memtest 1st.
FLASH METHODS
1) Winflash (Syar2003) -
Winflash is safe to use if your windows and pc is stable .
How to get it Download & install MSI Live Update. Winflash is located "C:\Program Files\MSI\Live Update 3\FlashUty\Award
And as with dos flash reset bios and any overclocking to "load optimized bios default" + save, before and after flashing.
After winflash is finished it ask if you want to reboot - answer no , and shutdown (turn off) windows/pc instead .
After that disconnect the PSU's AC and reset the cmos with the jumper on the board .
This is how I use it , - safest way .
Note ! Place checkmarks on bootblock / dmi area /update all /reset cmos
Using Winflash - Syar2003's GuideWinflash
2) MSI Guides for flashing using a floppy
2 Flavours depending on OS the majority of us use the 2nd as dos floppies can't read a NTDS partition.
2-1) Award Flash BIOS Procedure 98/ME
This method assumes access to hd formatted using FAT32 & therefore readable by DOS.
2-2) Flashing the BIOS for Users using NON FAT file system
For use with Linux based & NTFS File systems - HD Not readable from DOS. Using this procedure the the files are copied to the virtual drive before running the flash utility. So the flash effectively is all done in memory.
2) How to Flash Bios NVidia 64 & Award Bios - More Detail
Resources:-
Floppy Images - Boot Disc.com
Simply insert Floppy & run downloaded Exe file.
Bios Saviour
IOSS Bios Saviour RD1-PMC4
Bios Saviour - RD1 Model Selection Sheet
SST 49LF040A LPC /3.3V - PMC4 For Neo3 250 & Neo4 (Thanks Arioch )
Recovery:-
MSI - Bios Recovery
BIOS FAQ - How can you recover a corrupt BIOS ?
Bios recovery the dirty
way
Saving MurdoK's Bios - Syar
Offers Reprogramming/Replacement service - Cheaper than new mobo. Can't vouch for non uk service not used them. (1st off search engine)
EU Recoverybios.com
UK BiosflashUK
US Badflash.com
Back to Main nVidia Based Board Forum Index

Toshiba bios update

Ok so I just finally ran the recommended updates toshiba has been bugging me about at startup for the longest time and ran into an issue. Turns out there was a bios update hidden in there and I'm not sure that it finished properly. It ran the update fine from toshiba's update manager thing but after that it immediately restarted and continued updating from that actual bios menu and everything went smoothly until it finished. Now my laptop is stuck at this update screen saying its 100% done but refuses to respond in any other way, no keyboard keys do anything and the power button is unresponsive. I've been considering just yanking the battery out but I wanted to ask someone who knows what they're doing before bricking my pc. Here's a picture of the screen it's locked at and I'll include some specs: http://imgur.com/iRRDnwS
Toshiba satellite s55-a5295
Windows 8.1
Bios details are in the picture but it seems to be insydeH2O 1.3 updating to version 1.6
If you'd like any more details let me know and I'll try to get them.
Solved!
Go to Solution.

Yeah I held it for quite some time, everything was completely unresponsive. Fortunately I got if fixed today, I'll leave what happened in case someone has this specific problem. Turns out the bios was flashed successfully and it had fortunately frozen once things were stable. All that I needed to do was unplug the power and poke the tiny reset button underneath to force it to shut off and things rebooted just fine. Easy fix even if it was a little lucky, I'm just glad everything turned out ok. Thanks for the help Jerry!

Yoga 2 Pro Went DEAD After BIOS Update

Had a horrible experience .. with good ending ... when upgrading Bios for my Yoga 2 Pro. So I'd like to share with others. I bought my Yoga 2 Pro last June (Man 3/22/14) and love it! But, it had problem restarting automatically after Windows Update. At least 3 times (That I can recall. Did not use it briefly from June 30 - July 22), the screen reminding user not to shutdown after Windows the update would stay on until I manually powered it down and restarted it. Last July 23, it did again after Windows Update. Searched Lenovo web-site and found a Bios Update for Yoga 2 Pro (Win 8.1 64-bit). Downloaded the new Bios (dated July 11, 2014) and went through the instruction striclty. First of, the screen responses were not at all as detailed in the instruction. So, the instruction is not very good. Received 2 warnings: Make sure the laptop is connected to the charger during the procedure, and the bios is for Yoga 2 Pro ONLY do not install it on any other models. As part fo the procedure, the laptop switched to a Bios Utility program. Again received the aforementioned warnings. Update progress was shown on the screen. All of a sudden, then screen went blank and the keyboard stayed lit. Waited for about 30 minutes. Still the same. Press and held the power button down (not sure for how long) ... nothing! Just no response from the latop. Called Tech support. She (the tech support lady) said that ... it is not recommended for user to go through the BIOS upgrade! What? Then why post it on Lenovo.com? She also said that I should not have downloaded software from the internet and upgrade, especially for BIOS. Well, I told her that I did not download the program from ANY web-site, I downloaded it from LENOVO.com. She said further that looks like the BIOS update had damaged my mother-board, there is a problem with Win 8 & 8.1, and because it was my own doing ... the damage would not be covered by the warranty! Considering the circumstance, Lenovo would waiver the initial $99 fee to assess the damage, but I would have to pay for any repair costs. In any case, I was so fumed at Lenove Tech Support responses that I hung up. close my laptop and put it aside. Almost 24 hours later, when the battery drained completely, I connected the laptop to the charger, press the power button to turn it on ... and ... to my surprise, the laptop booted and everything came back normal! The last (7/25) auto restart seemed to go well. Not sure if the auto restart problem is fixed with the new BIOS, but it seems to be. Time will tell.

Thank you for your posting. I searched the net when I ran into the problem, but could not find any help. Obviously, my search was not exhaustive. I was trying to make the following: a. Lenov should be more specific in their BIOS update instruction. Their instruction was ... far ... far from reality. b. Lenovo tech assistance was ... not much help. After listening to the description of my prolem, the tech lady immediately said that the operation must have damaged the mother-board, and that the operation is not ... recommended. No guidance on draining the battery a or how to restart the machine, etc... What I received was confusing that caused more panic! As a note, I had done BIOS upgrade on DELL PC/laptop before w/o any problem. I fully understand the implication of a BIOS upgrade, but trusted that manufacturer fully tested whatever that they post in their web-site. Oh well, live ... and learn! All in all, the Yoga 2 Pro is a great machine and I love it! Hope that anyone who runs into the same problem will be able to get the needed help in time! Cheers,

MSI-6712 BIOS update issues

I have a PC, running XP Pro SP3, which was built for me nigh on 9 years ago.
Motherboard: MSI-6712 (KT4V-L) Version 1.0 (North Bridge KT400A Rev 80, South Bridge VT8235 Rev 00)
CPU: AMD XP2800+ CPU (Socket A 462, 3000 MHz)
Memory: 1.0GB DDR
GPU: nVidia GeForce FX-5200 (128 MB)
About 4 years back I considered updating the BIOS, but the MS LiveUpdate utility (v 3.5 I think it was) no longer worked (wrong URL). Tried updating it, but the update (can’t remember the version) shut down my system whenever I tried to use it. So I rolled back and left it.
Recently, a program I was evaluating (running on .Net 4 Client Profile) caused my PC to freeze up and after uninstalling I discovered all manner of problems with USB peripherals (recognition and auto-play issues).
Tried to restore a backup (Retrospect Express HD) from a Maxtor One Touch III external drive but it wasn’t having it, presumably because of the drive recognition issues, and a straight System Restore wouldn’t complete (because XP would freeze at log off).
I feared there had been hardware damage, but decided to try a clean re-install of XP Pro. The person who built the PC had left a folder of system set up files (VIA chipset 4in1, LAN, RealTek AC97, nVidia drivers, utilities etc) on the hard drive (which I backed up) but when it came to installing XP, I couldn’t figure out which chipset drivers to install, as there were multiple versions (presumably for his purposes). So I let XP install the default windows drivers and then replaced them with the latest VIA 4in1 set for the KT4V-L from the MSI download page (can’t post link) – driver version 5.11a, release 20.4.2007
Seemed to go well, but it was suggested to me that it might be a good time to update the BIOS. So I installed MSI Live Update 5 and ran a scan. Strange thing is that an automatic scan (which pulls up just the nVidia driver and utilities) reports that none are installed and a manual scan reports that the BIOS, Drivers and Utilities are the latest version and no there is need to update. How can that be? I’ve never updated the BIOS and the only other utility I re-installed is PC Alert 5.
Yet when I run a SIW (System Information for Windows) scan and it reports the following:
BIOS Properties
BIOS Vendor American Megatrends Inc.
Serial Number 00000000
BIOS Version Version 07.00T
Firmware Version 101.114
BIOS Date 04/02/01
BIOS Size 256 KB
BIOS Starting Segment F000h
DMI Version 2.3
Characteristics
supports ISA Yes
supports MCA No
supports EISA No
supports PCI Yes
supports PC Card (PCMCIA) No
supports Plug-and-Play Yes
supports APM Yes
upgradeable (Flash) BIOS Yes
allows BIOS shadowing Yes
supports VL-VESA No
ESCD support is available Yes
supports booting from CD-ROM Yes
supports selectable boot Yes
BIOS ROM is socketed Yes
supports booting from PC Card (PCMCIA) No
supports Enhanced Disk Drive specification Yes
supports INT 13 for Japanese NEC 9800 1.2M floppy (3.5-inch, 1024-byte sectors, 360rpm) No
supports INT 13 for Japanese Toshiba 1.2M floppy (3.5-inch, 360rpm) No
supports INT 13 5.25-inch/360K floppy services Yes
supports INT 13 5.25-inch/1.2M floppy services Yes
supports INT 13 3.5-inch/720K floppy services Yes
supports INT 13 3.5-inch/2.88M floppy services Yes
supports INT 05 print-screen Yes
supports INT 09 and 8042 keyboard services Yes
supports INT 14 serial services No
supports INT 17 printer servicesYes
supports INT 10 CGA/Mono video services Yes
NEC PC-98 No
supports ACPI Yes
supports legacy USB Yes
supports AGP Yes
supports booting from I2O device No
supports booting from LS-120 Yes
supports booting from ATAPI ZIP drive Yes
supports booting from IEEE 1394 deviceNo
Smart Battery supported No
BIOS Boot Specification supported Yes
Function key-initiated Network Service boot supported No
Enable Targeted Content Distribution No
How is it that Live Update 5 doesn’t pick this up?
So, apologies for the convoluted post (thought it best to explain the events leading to this), but what to do?
1.   Do I need to update the BIOS, given that it has never been done and I now have the latest VIA 4in1 drivers installed?
2.   Why is Live Update 5 not reporting the status correctly and is there anything I can do to correct this.
3.   Otherwise, if a BIOS update, is warranted, should I go ahead and download directly from the Global MSI webpage and then which version? (can’t post link). I note from the version descriptions that it was v1.7 (26/12/2002) that added support for AMD XP 2800. Strange then that the guy who put together my PC, would not have updated the BIOS from v1.0 to 1.7 at that time!!
4.   Should I also update the nVidia driver, and if so, when? Before or after a BIOS update or is that irrelevant?
Video Adapter NVIDIA GeForce FX 5200 (Microsoft Corporation)
Code Name NV34
Video Processor GeForce FX 5200
Technology 0.15 0m
Adapter DAC Type Integrated RAMDAC
PCI ID 0x10DE / 0x0322 (nVidia Corporation / GeForce FX 5200 [NV34.3])
PCI sub ID 0x1462 / 0x9360 (Micro-Star International Co., Ltd. / MS-8936 (FX5200-T128))
Memory128 MBytes
BIOS String Version 4.34.20.22.00
BIOS Date 08/01/03
PnP Device Id PCI\VEN_10DEDEV_0322SUBSYS_93601462REV_A1\41FEB96E400008
Video Mode Description 1440 x 900 x 4294967296 colors
Driver Version 6.14.10.5673
Driver Date 2004-08-03 22:29:56
DirectX DirectX 9.0c (4.09.0000.0904)
Driver Name nv4_disp.dll
Driver Description NVIDIA GeForce FX 5200 (Microsoft Corporation)
Edit: Actually, looking at the original SIW scan report I see that there are some errors relating to DirectX. Not sure if I need to update DirectX (surely MS Update does that automatically) and/or the nVidia driver.
5.   One other thing that concerns me is that the SIW scan reports that the BIOS is reporting wrong values for the DDR memory. What’s that about?
Memory Summary Reported by BIOS
Warning! Wrong values reported by BIOS
Maximum Capacity 3072 MBytes
Maximum Memory Module Size 1024 MBytes
Memory Slots [unknown]
Error Correction
Memory Timings 3-3-3-8 (CL-RCD-RP-RAS)
Device Locator Slot 1
Manufacturer Silicon Technology
Capacity 512 MBytes
Memory Type DDR (PC3200)
Speed 200 MHz
Supported Frequencies 166.7 MHz, 200.0 MHz
Memory Timings 2-3-3-7-0 at 166.7 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 2-3-3-8-0 at 200.0 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Data Width 64 bits
EPP SPD Support No
XMP SPD Support No
Device Locator Slot 2
Manufacturer Silicon Technology
Capacity 512 MBytes
Memory Type DDR (PC3200)
Speed 200 MHz
Supported Frequencies 166.7 MHz, 200.0 MHz
Memory Timings 2-3-3-7-0 at 166.7 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 2-3-3-8-0 at 200.0 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Data Width 64 bits
EPP SPD Support No
XMP SPD Support No
Hope someone can advise me on this.
Cheers.

Sorry for cross-posting to another forum, but this has got me in a twizzle
http://www.windowsbbs.com/pc-hardware/89688-need-ram-recommendations-msi-kt4v-l-2.html#post493343
According to the poster (Post #30), the KT4V-L can support 3gB DDR400.
I looked at the MB in my PC and it is in fact stamped MS-6712 KT4AV v10A (assumed 1.0A ). Both CPU-Z and SIW report it as a MS-6712 v1.0 (BIOS 07.00T 04/02/01, Firmware 101.114)
According to the MSI product webpage, the only difference between the KT4AV and KT4AV_L is that the latter includes an (optional) on-board 10/100 LAN.
http://www.msi.com/product/mb/KT4AV.html#/?div=Detail
The ethernet port on my PC is (as described in Device Manager) is a Via Rhine II Fast Ethernet Adapter, whereas in the listed MSI specifications, the optional 10/100 LAN is stated to be a VIA VT6103 LAN controller. So possibly then I was mistaken in assuming that my MB is a KT4AV-L.
Even so, if the statement about the KT4AV-L supporting 3gB DDR400 is true, surely this also applies to the KT4AV ?
Looking at the available BIOS updates on the MSI page, I can see no mention of an upgrade in DDR400 capacity:
http://www.msi.com/product/mb/KT4AV.html#/?div=BIOS
Edit: Ah, the guy in the post specifically refers to a KT4V-L v1.1 not KT4AV-L and I see that it is different product:
http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html#/?div=Detail
What's confusing is that they all designated as MS-6712. So if anyone, like me, does a look up under MS-6712 they could pull up either version, and since the KT4AV/L and KT4V/L have different BIOS update series, I can see how someone could easily flash the wrong BIOS.
That aside, the memory specifications for the KT4V/L are essentially the same as those in the User Guide that came with my KT4AV:
Supports up to 3GB PC1600/2100/2700/3200* DDR SDRAMs
*See Glossary for recommended DDR400 modules - with the largest listed module capacity being 2 x 512MB
So where does this "up to 3GB DDR400 capacity" notion come from. I'd really want to believe it. And if the guy in the PC shop is to be believed, I'd settle for just 2GB.
Edit 2: Oh, boy, so there is a separate product listing for the KT4V-L v1.1:
http://us.msi.com/product/mb/KT4V-L--v1-1-.html#/?div=Detail
Yet, the memory specifications appear to be the same as those for the other MS-6712 versions and BIOS updates are the same as those for the KT4AV-L (very confusing). In fact the downloadable User Guide is the same - 'KT4AV MS-6712 (v1.X) ATX Motherboard'.
Am I missing something here?

U430 BIOS Update Procedure (fixes wake from sleep issue on Windows 8.1)

Hopefully this will make the BIOS update process a bit easier. The following steps address two common questions (Failed BIOS Update and the Windows message about improperly configured Secure Boot). NOTE: After a successful BIOS update you will want to check additional items in the BIOS not directly covered in the steps below (e.g. Intel Virtualization.... the update disabled this for me.)
U430 BIOS Update Procedure:
1. Download the BIOS update from Lenovo (it will be in .exe format... the program will install new BIOS).
2. Shut down computer.
3. Use the "Novo" button (tiny button on left side near Power button).
4. Enter BIOS setup.
5. Under "Security" select "Secure Boot" and choose "DISABLED" (this allows the BIOS update program to work properly).
6. Under "Exit" select "Exit Saving Changes".
7. Computer will reboot. Log in to Windows (it will have a message stating "Secure Boot not configured properly" this is expected).
8. Run the Lenovo BIOS program (this will reboot the computer and you should see an update status screen). Once finished, the computer will reboot. Log in to Windows (the "Secure Boot" message will still be there) and then turn the computer OFF (I've found that turning off the computer from the log-in screen doesn't completely shut down the computer. If that's the case then hold the Power button until it does shut down).
9. Use the "Novo" button and enter BIOS setup.
10. Under "Security" make sure "Secure Boot" is ENABLED.
11. Also under "Security" select "Restore Factory Keys" and hit Enter. Select "YES" (this step along with our previous step will make Windows happy).
12. Under "Exit" select "Exit Saving Changes" (computer reboots and all should be fine!)

Hi,
Generally speaking, this problem should be caused by hardware driver problem. Such as Graphic driver, NIC driver, etc. Please check computer driver edition, make sure they are compatibility with Windows 8.1.
Actually, I made a search on Acer official site, the model of your computer doesn't have all hardware driver provided for Windows 8.1. Such as Graphic driver. You can refer to the link below for more details.
http://us.acer.com/ac/en/US/content/drivers
In my opinion, it would be better to contact ACER, to check whether this serial computer had the same problem with yours.
Roger Lu
TechNet Community Support

MOVED: Z68A-GD65 (G3) - can't overclock after BIOS update

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=252819.0

Quote from: JLio01 on 29-January-15, 13:54:12
What does ME version show under BIOS currently? When you check the ratio under OS, do you put your system under loading? And did you re-install driver from website after updating BIOS?
http://www.msi.com/support/mb/Z68AGD65_G3.html#support_download
ME version 8.1.2.1318. Even if I put the system at 100% load in Windows, the processor never moves past 3.4 GHz. I've checked this in multiple programs (CPUZ, RealTemp, TMonitor, etc.) And yes, I reinstalled the drivers that were listed under the BIOS update.
Quote from: TZBC on 29-January-15, 14:17:52
Go to OC section and change to advanced mode, change your CPU Ratio Mode from Dynamic to Fixed mode.
And go to windows checking the ratio have changed or not.
EDIT: sorry, I forgot this motherboard doesn't have this settings, try Disabled or Enable "Adjust CPU Ratio in OS"
I've tried changing that setting (Adjust CPU Ratio in OS) but it doesn't seem to have any effect.
However, I just noticed that I didn't have the newest version of CPUZ. I updated it and now it shows more detailed information for the multiplier: x34 (16-44)
So it is detecting that I have set it to 44 in Windows after all. But it seems to be indicating that it's using a dynamic CPU ratio of 16-44 - which I don't want, I want it fixed at 44 - but as you say, there's no option for dynamic/fixed on my motherboard. However, on the old v23.7 BIOS, if I set it to 44 it stayed at 44 always.
Even if it's using a dynamic ratio for some reason, it's not doing that right either because it's still never moving past 3.4 GHz (nor is it ever dropping below 3.4 GHz).

Tecra A11 - Bios Update offered - necessary?

Hi - I've just been offered a BIOS Update for my Tecra A11-17N (Via Toshiba Service Station) - BIOS Update v3.10....
Clicking on the update doesn't offer any details as to what it contains/fixes/improves - it just says basically "install, and computer will re-boot a few times".
My Tecra is running perfectly - no issues at all. Should I ignore this?

Hello
> My Tecra is running perfectly - no issues at all. Should I ignore this?
Youre right. In this case you can ignore this update because everything works perfectly.
BIOS update is always a little bit risky so it shouldnt be done just for fun. It should only be done if its really necessary and in your case you dont need it.
So have fun with your Tecra A11 and you can forget the update :)

Where are the BIOS update release notes - Satellite P300-Q01

I have a Satellite P300 Q01 - there have been two BIOS updates since I bought it W360 and W390.
Where can I find the release notes detailing what is fixed/changed in each release?
Thanks

Unfortunately you will not be able to find them. :(
I don't understand why but this info is not published.

Satellite L650 - ODD does not read most of CDs or DVD's after BIOS update

While copying DVD's I was asked to do a bios upgrade from the software that came on my laptop, so i thought coming from toshibsa it should be safe. I closed all my applications and let the update happen, restarted my pc and tried to continue to copy my dvd's.
Now my dvd writer does not read most of my cds or DVD's,originals as well.
I have managed to get hold of my previous Bios version after quite a battle before the update to see if i can go back to my old version but the exe file runs a program that says the version is older then the one i am using so it will not load it.
Any help would be greatly appreciated as i have two days to copy 100 DVD's for a client and i am unable to do this now,
I have a Toshiba Satellite L650 laptop running windows 7 64 bit 8 gigs memory with a SSD Hard drive

> i can go back to my old version but the exe file runs a program that says the version is older then the one i am using so it will not load it
I dont think that BIOS is the problem here the point is that the CD and DVD support details are stored in the CD/DVD drive firmware and NOT in the notebook BIOS.
So in my opinion the BIOS update is not the reason for your issue.
I think you should check if laser lens cleaning would help you to read the disks.
Use an cotton wool tip and alcohol fluid to clean gently the laser lens.

Sound from speakers as well as headphones after bios update in pavilion g4 1121 tx laptop

Dear madam/sir
after performing a bios update as sugested by hp support assistant I am getting sound from speakers as well as earphones .I stay in a small town and there is no hp centre nearby .I am a student staying in hostel where i cant play sound through speakers as it disturbs my room mates .Kindly assist .
product details
product no ; QB404PA#ACJ
product : hp pavilion g4 1121 tx
purchased : sept 2011
Thank You

Hi @satyakam
Welcome to the HP Support Forums!
I understand that you are enjoying your sound from everything today. I am happy to help.
If you have a sound application installed along with your sound driver, then I would check the settings for the speakers and headphone in that application.
Then I would make your headphone the default device when it is plugged in.
To make headphone as the default device
1.    Click on Start; Go to Control Panel.
2.    Click on Sound.
3.    Switch to Recording.
4.    Select your microphone/headset as the default device.
5.    Save the changes by clicking on OK.
Also you can Uninstall and re-install your audio device drivers, to do that:
1.    Click on Start; in the start search type “devmgmt.msc” without quotes and press Enter.
2.    Expand Sound, Video and Game controllers.
3.    Right click on the audio component and then click uninstall.
With the driver uninstalled then download and re-install the driver from:
HP Pavilion g4-1121tx Notebook PC Drivers
Just be sure to select the correct operating system from the drop down, and click next, which will refresh the list of drivers below.
Let me know if that helped at all.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

V570 Bios update (Windows 8)

Can I use this Bios update file for the v570 in Windows 8? It only lists up to Windows 7 in operating systems.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS027341
Also is this the correct MD5 for the Bios update:
A67CD81FC9340D98C9C7E8BC2BC6EF81

Hi
The bios should be updated in windows 7 only and shouldn't be updated in any other os other than windows 7.
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

B75MA-E33 - long time to post after installing most recent bios update

I installed the bios update from the product page for this motherboard and flashed it directly from the utility within the bios. It installed fine, but after installing this update the post time has increased from about 10 seconds to anywhere between one and five minutes. It sits on the screen with the "A2" code in the bottom right corner before loading the msi splash screen. I searched the forum but didn't see anyone else reporting this. Anyone have any idea what's causing this? I verified that the settings in the bios haven't changed.

Quote from: flobelix on 02-March-13, 22:59:41
Solution? Thanks? This is not your thread. Topic starter has been asked to post system details.
I guess you misunderstood my post.What I was that I have a similar motherboard and I was planning on updating the BIOS.He reported about this issue and I'm thankful to him for that.

Bios update details

Similar Messages

Maybe you are looking for