Bios update for my Toshiba satellite c675-s7200 - Helppppppp :/

I am being told to download the bios update for my laptop so I put in the serial # and it gives me an update but I have read alot about once you upate your bios it wont work so I am really nervous about doing this..here are the problems I have been having..
1. My laptop was restored back to the factory settings just like it came out of the box.
2. When I turn on my laptop I have to press f1 to start windows now keep in mind it does not ask me to press any keys I only knew to press f1 because it was stuck on the Toshiba screen showing the f2 and f12 keys so I began pressing them all until i got to windows. None of the function keys work expect f1
3. Once I get into windows everything runs and works fine. I have gone into my toshbia asst to reset the bios to default but it does nothing so I can not apply it. What do I need to do?
I have been told that I need to replace my cmos battery but then I have been told that is not the problem the problem is the bios settings need to be changed to the default WELL ok how do I that if it will not let me?
Helpppppp...

Hi! It could be your CMOS battery causing this. Shut down your PC. When it starts up and you see F2 and F12 at the bottom of your screen, press F2. Find where it says to set to default on the bottom of the screen. My default is F10. Yours
may be different. After you set to default , save and exit!
Dokie!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Similar Messages

  • Toshiba Satellite C675-S7200 Recovery Error

    When I normally try to start my laptop without touching a thing, get this error
    Intel UNDI, PXE-2.1 (build 083)
    Copyright © 1997-2000 Intel Corporation
    This Product is covered by one or more of the following patents:
    US5, 307, 459,  US5, 434, 872,  US5, 732, 094,  US6, 570, 884, US6, 115, 776 and
    US6, 327, 625
    Realtek PCIe FE Family Controller Series v1.24 (10/07/10)
    PXE-E61: Media test failure, check cable
    PXE-M0F: Exiting PXE ROM.
    Reboot and Select proper Boot device
    Or Insert Boot Media in selected Boot device and press a key
    When i try it in safe mode, I get a blank/black screen
    So naturally I tried to restore it to its factory settings or whatever and after about an hour of waiting I got this error
    ERROR : 08-114B-0000
    Partition creation failed.
    Please press OK to turn off computer

    It sounds like your hard disk is failing and needs to be replaced.
    - Peter

  • Toshiba Satellite P875 S7200- Motherboard

    I have been searching for the name and motherboard information for a Toshiba Satellite P875 S7200. I have searched everywhere and cannot even find a break down for that computer. I really don't want to mess anything up as I have other projects to do. I am wondering if anybody could tell me the model number for the motherboard in a Toshiba Satellite P875 S7200.
    Thanks for your time it is very appreciated!

    I believe it's V000288120.
    - Peter

  • Where can I find a BIOS update for Satellite A200-14D (PSAEC)

    Hello,
    Where can I find a BIOS update for this model?
    My bios is 23/10/07 Windows Vista 32 Bit 1.80-WIN

    Hi
    Did you check the Toshiba European driver page?
    There you could find all drivers and BIOS for the Satellite A200-14D (PSAEC)
    But I checked the page and the BIOS 1.8 for Win Vista 32bit is still the newest one.
    Seems you are already up to date buddy ;)

  • Where is a BIOS update for P505-S8010? And does Toshiba have a driver utility?

    I have searched Toshiba downloads a lot and I can seem to find any bios update for my laptop
    any links to the bios would be very helpful
    Solved!
    Go to Solution.

    ACPI Flash BIOS version 2.90 for Satellite P500/P505 (PSPGSU/PSPGJU)
    Select the Download link at the top of the page.
    You'll find it in the drop down menu under BIOS.
    A lot of people posting here have had problems
    updating the BIOS. If you've never updated it
    before it might be a good idea to find out
    what's involved.

  • There are two BIOS Updates for Satellite A210 2.00-WIN & 2.30-WIN

    In 2010 there are two BIOS Updates for Satellite A210 2.00-WIN & 2.30-WIN
    In archive: http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp
    They compatible for Satellite A210-1AO, Part Number: PSAELE-03Q009G3 (BIOS version/date TOSHIBA V2.0, 2008.06.10)?

    1. When I press power button notebook and OS start as usual.
    2. When I press power button and after I turn PC to BIOS mode, PC is crashing (shortly).
    3. So, I checked using standard OS tools hard disks for errors (errors was on disk where OS and all software installed. All errors was fixed).
    4. After I started using standard OS tools (Start from: BIOS->System start from CD-Rom with tools on CD) RAM memory test.
    5. On stage Test All Memory PC crashed. (No any dumps/logs left in the system about crashing).
    6. Now I need to do some physical manipulations. Ill have check each memory module. And I don't know how looking my motherboard, what is where on it. Where I can see scheme with details, names and elementary explanations (what is what)?
    Im not sure, but motherboard should be IALAA..?

  • Satellite A200-23U - Need Bios update for XP

    Hi!
    Where I can find BIOS update for this notebook for Windows XP?
    Thanks.

    > Is it possible install other similar BIOS for XP from the Toshiba American driver page? Are there some forecasts for appearance of BIOS XP update on the Toshiba European driver page?
    I would not recommend installing different BIOS updates from different notebook series on the Satellite A200-23U.
    The point is that a wrong BIOS or not compatible BIOS can damage the ROM module or the motherboard!!!
    I would not risk this!!!
    Fact is that you should update the BIOS only with the version which was designed and published especially for your notebook model.

  • Where can I find a BIOS update for Satellite A100-200 (PSAA8E)

    Hello,
    Where can I find a BIOS update for this model?
    The BIOS on the download page is November last year, is there anything newer or does anyone know of an update that is compatible?
    Thanks,
    Ian

    Yep, newest updates and drivers for your notebook you will find on the Toshiba download pages, as Jimi already mentioned.
    Just as a little hint from my side is, that if there is nothing wrong with your notebook, just leave it as it is.
    As there is the saying, never touch a running system.
    So keep that in mind. ;)

  • BIOS update for L50-B not found

    Hi there,
    I found out that there is a new BIOS update for my Satellite L50-B series but whenever i try to download the file it keeps coming with with 404 not found. Have toshiba pulled the update or something?
    I'm running Windows 8.1 64 bit.
    Thank you!

    You cannot download BIOS update if you don't know exact model part number. Part number is visible on the Toshiba sticker that you can find at the bottom side of your notebook.
    By the way is there some reason for BIOS update? Do you have some technical issue with your machine?
    I mean if everything is OK you must not change anything.

  • Cannot download BIOS Update for Tecra M5

    I'm trying to download the latet BIOS update for the Tecra M5.
    When I click on the download link, I get redirected to another server.
    My login does not appear to work for this server - is there another location I can download the file from?
    Thanks.

    Hi,
    When I try to download the bios (Tecra M5, 3.60 Win) I get another link:
    http://support.toshiba-tro.de/tedd-files2/0/bios-20071206111654.zip

  • My satellite c675-s7200 is stuck on the windows resume loader and nothing happens when I press enter

    How do I get my laptop off of the windows resume loader screen. It's says to hit enter but nothing happens when I do

     
    Satellite C675-S7200
    windows resume loader screen. It's says to hit enter but nothing happens when I do
    The resume loader is probably trying to resume from hibernation by reading the hiberfil.sys file.
    Press and hold the power button to turn off the computer.
    Does the same thing happens when you restart?
    Can you use the F2 key to access the BIOS?

  • Can't find BIOS update for Equium A60-157

    Hi, hope someone here can help me, I'm looking for the BIOS update for a EQuium A60-157, can't find it on the Toshiba BIOS update page.
    Thanks in advance

    Ive checked Toshiba support page under http://eu.computers.toshiba-europe.com and I found BIOS update 1.90-WIN for your Equium notebook.
    I don't know why you cannot find it but please under Product type choose option ARCHIVE.
    You will find it there.
    Bye

  • Re: A problem downloading BIOS updates for A200-1AX

    Hi,
    I am trying to download Windos XP Bios Update for A200-1AX (PSAE6} but the Toshiba Support Site Keep asking me to enter a Username and Password :
    "The server support.toshiba-tro.de at www.toshiba-tro.de requires a username and password."
    Any one knows how can i pass this issue and download this updates
    thanks
    Majed

    I tried from Toshiba Spain without user or password. Follow link:
    http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ES

  • BIOS update for Equium A60-181

    Hi, according to the toshiba website there's a new BIOS update for my laptop.
    I was wondering is it worth the update unfortunately there's no information
    supplied with regards to bug fixes or improvements ? Also should I use the
    Windows update tool or use the bootable CD option it's just I don't feel safe
    flashing under Windows XP unless this is a standard flawless procedure ?
    cheers,
    Richard S.

    Hi Richard
    Richard do you have some problems with your unit? If everything works fine I do not see any reason for BIOS update.
    If you think that BIOS update is necessary you can try Windows based Bios Update but please check first Toshiba BIOS-Update Description before proceeding.

  • Bug in latest 2 bios updates for FM2-A55M-E33

    Hey guys,
    Today I tried to update my bios of my FM2-A55M-E33 to the latest version(7721vA4.zip). Once everything completed succesfully, the bios wouldn't boot anymore.
    I plugged out my 3TB hdd and it worked fine. I installed an earlier version of the bios(7721vA0.zip) and this did work with my 3TB hdd.
    So in short:
    The latest bios updates for FM2-A55M-E33 will freeze(black screen) at bios start when a 2TB+ hdd drive is plugged in.
    Namely:
    FM2-A55M-E33 (MS-7) V10.3 BIOS Release
    FM2-A55M-E33 (MS-7) V10.4 BIOS Release
    I hope you can fix this asap, especially since these are the latest updates.
    Regards,
    Henkie de Grote

    Quote from: flobelix on 24-February-13, 08:05:55
    better report to MSI: >>How to contact MSI.<<
    True, but I couldn't find an email address, couldnt see how to contact them through a form or something, and don't really want to call them if otherwise possible.
    Thx for the info anyways

Maybe you are looking for

  • Openvpn can't connect to network

    hi all, I'm glad to come here, there maybe more active. so I post here, I'm use Archbang X86_64. up to date. I want use openvpn connect some site blocked by gov, but when I use openvpn, it can't connect any web site. This is my client.conf: client re

  • The shared library is not compatible with this version of itunes

    I have a G3 running Jaguar (and iTunes 6) that hosts my MP3 collection. Until recently, this worked great as a shared library, happily showing up in iTunes on other machines on my network, including my Powerbook. Then I got iTunes 8 on my MacBook Pro

  • Debug mode for WD app in CE 7.1 EHP1

    Hi experts, I need to debug a WebDynpro application that I have created in my CE7.1 EHP1 environment. In the config tool for the Java instance, I have set "Debug Mode" to true and checked the "Enable Debug node" checkbox. I restarted the server after

  • Gettng item property - prompt visual attribute

    have set the prompt visual attribute to 'ACTIVE_COL' SET_ITEM_PROPERTY ('TEST',PROMPT_VISUAL_ATTRIBUTE, 'ACTIVE_COL') but when I try to get the value back it return 'CUSTOM' GET_ITEM_PROPERTY ('TEST',PROMPT_VISUAL_ATTRIBUTE) Why???

  • E71 bad camera

    hi everyone i have a e71 on fw v200 now when i wanna take pictures at night i see lines in the window before taking pictures they have a red like tint is this normal? its only at dark and if i take a picture with flash the photo is without these line