BIOS update for Toshiba satelite C660 failed and the laptop is not coming up again

My laptop had a problem charging the battery,even as i tried three different new batteries,it was still the same.So i decided to do BIOS update perhaps it would fix it but it didn't,guess my mistake was coz i did the update via windows.
can anyone here assist as the PC is not coming up again.

Try the Troubleshooting Assistant or the suggestions in this article.
What can I do if my Windows 7 or Windows Vista laptop won't start?
- Peter

Similar Messages

  • Connection Source for .... failed because the environment is not trusted

    I got a message like this -
    Connection Source for .... failed because the environment is not trusted
    when trying to bind a field to a data connection field. What does this mean? I setup the data connection and it tested out fine.

    I am not exactly sure what you are referring to by the see "Note". I didn't find a "Note" that was related. The only thing I did find was the following:
    "If you are using external data sources in a form design that you want users to fill in Adobe Reader, you must set usage rights for the form by using Reader Extensions Server."
    I am only trying to display back information out of a database. I don't want to write information. Is there any way to get around this?
    Matt

  • I have forgotten my security question and I have tried for to days for uses to send me the resets and the email is not coming though?

    I have forgotten my security question and I have tried for to days for uses to send me the resets and the email is not coming though?

    If you've been unsuccessful resetting your security questions by signing into your account at appleid.apple.com (manage my apple I'd) and the going to password and security, and have also tried contacting iTunes support and have not heard back then:
    Call 1-800-APL-CARE and have the following info ready:
    Your verifiable and active apple I'd username, the serial number of a device registered in your name, and some billing info currently associated with your account.

  • HT5312 I have bought a iTunes gift card and went to buy something then it asked for my security questions. I don't remember them and the prompt is not coming up to reset them. What can I do?

    I have tried to reset them but the prompt is not coming up.

    Go back to the article you asked this question from and use the link to contact the iTunes Store staff in the 'Additional Information' section. If you don't already have a valid rescue email address, you can't reset the questions yourself, and nobody on these boards can reset them for you.
    Setting up a rescue email address requires correctly answering two of the questions.
    (93197)

  • Adobe Application Manager says Update Failed and the patch is not applicable for me. PLEASE HELP!

    As the title said, that's my dilemma. I have the OS X Yosemite update (worst mistake of my life) on the iMac. Photoshop CS6 was acting much slower and crashed a couple of times, so I tried to update it. However the Adobe Application Manager was uncooperative and said that the update failed. If there are any other things you need to know in order to fix the problem, tell me. Just please, please HELP ME.

    which update are you trying to install? What is the current version you have?
    Keeping Photoshop is Up-To-Date: http://adobe.ly/PS-Up-To-Date

  • How can I install Adobe Photoshop Elements Update 9.0.3 after I get a message that Installation has failed and the solution is not in troubleshooting or forums?

    My Photoshop Elements 9 stopped working a couple of weeks ago. When I clicked the PSE button nothing happened. I tried this several times over a few days and it still failed. I uninstalled the program and re-installed it. It worked well. Then I tried to install the Update 9.0.3. The download was almost successful. When it was about to show 100% successful for the download, an error message said the installation had failed and that I should try later. I tried this many times over a few days and the same result occurred. I tried troubleshooting and the answers to questions, but I could not find an answer. I don't know where to go to see if anybody has answered my question. How can I install Update 9.0.3?
    Colin Hansen

    Try downloading and installing the 9.0.3 updater from here:
    mac
    Adobe - Photoshop Elements : For Macintosh
    windows
    Adobe - Photoshop Elements : For Windows

  • Updates failed and the laptop won't start up

    I started to download the Apple updates today and half way through the laptop just close down. It now won't start up again.
    It goes throught the Login window and sticks on the bluw screen with the cursor static in the top left corner.
    Can anybody help with a suggestion?

    Graham M.,
    In order to resolve your problem, please provide additional info.
    1) Were you on battery or AC power?
    2) Are you using dial-up, DSL, or Cable broadband?
    3) Are you connected to the Internet by Ethernet cable, Airpt. Extreme/Expr?
    4) What version of Panther .... 10.3.9?
    In the meantime, completely shut-down the PowerBook and disconnect the AC power and carefully remove the battery; unplug ALL power sources to any of the above (2) and (3).
    Wait about 20 minutes, then reinstall the battery and plug-in the AC line to the PB.
    a) Insert your Panther install disc #1
    b) Press the power button, while holding down the C key until the Install window appears.
    c) From the Apple Menu Bar select Disk Utility and run Repair Disk only. Do NOT Repair Permissions from the disc; it will be outdated.
    d) If RED text is displayed, run the Repair Disk a second time even if the repair was completed.
    e) After the second run, eject the Install disc and RESTART the PB from the Apple contextual menu.
    f) Using Disk Utility (from Applications/Utilities/Disk Utility) run Repair Permissions.
    If everything looks OK at this point and you have the above peripherals:
    reconnect power to any external modem ... wait 5 minutes, reconnect power to the Airport ... wait 5 minutes, reconnect any Ethernet cable.
    Assuming your good to go, update to 10.3.9 from the COMBO updater on the Apple Support Downloads web site and run Repair Permissions again.
    Consider installing a very good maintenance program like Macaroni.
    http://www.atomicbird.com/
    I hope all this helps; let us know.

  • Ive updated my iphone 4 to ios5 and the music will not play atall even though its all on the phone is anyone else having this problem?

    Obviously Ive had the same errors originally but the software has updated fine now. But for some reason the music on the phone will not play atall! with or with out headphones. It seems too just be staying at 0.00mins and even if I fast forward it it just stays at the particular mins fast forwarded to. Has anyone else had this problem?

    Similar symptom here.  I gathered from other threads that by removing all the songs and re-sync them back to iPhone4 would sort the problem!  I tried with one album and it seemed to have work fine!  So I removed all the songs and transferred them back again!  However, I could not launch Music app any more!  Click on Music and it just stopped, i.e. could not be launched!!!
    However, I noticed that I could still play all the songs through headphone control.  But if you play without the headphone plugged in, no sound comes out of the phone speaker!!!!!
    Aarrrgggggghhhhhhhhhhhhhh!!!!!!!!
    Apple - surely you must seriously look into this and come out with resolutions by now!  Would SJ step in by now????? RIP SJ!  Apple, in fact all of us, miss you - with diferent reasons !!!

  • When connecting my iphone to the computer all goaes well on the sync (ing) is that when its finished I have a message that itunes is waiting for changes to be applied and the programme will not finish the complete sync!! any answers please.

    When connecting my iphone to the computer, all goes well with the sync until the last step. Step 6. It says "waiting for changes to be applied" and won't complete the sync!! anyone know how to rectify.

    I'm having the exact same problem.  Using iTunes 1.1.5, iPhone 5 which is updated. 
    Computer is running OS X version 10.9.2

  • Macbook (4,1) "/" key not working, and the laptop will not stay off.

    Yesterday my macbook keyboard and trackpad stopped working suddenly. I was in the middle of something so I plugged in a nearby usb keyboard and mouse and kept working. I shut down my machine and tried to turn it back on. Nothing happened.
    An hour later I tried again to power it on. This time it worked, however my "/" key doesn't do anything, and when I shut down the computer it powers right back on.
    I bought the laptop in early 2008, early 2009 Apple replaced the top part of the case and the hard disk under warranty. My question is; what are my options for getting this fixed without paying $$$? Will Apple be helpful here since it appears their replacement part is malfunctioning?

    Items replaced under warranty repair are typically only covered as far as the original warranty term. Still, I would take it in and have it checked as it sounds like there is either a loose connector or fault in the keyboard assembly.
    -Douggo

  • I downloaded the recent update for version 10.6.8 and the font on the hardware and applications have shrunk from 14 to 10 and I can't change it back

    How do I change the font back to the 14 that I had before the "update"?

    For the names of files and folders, use View Options to do that. You can access View Options while in Finder via the selection by that name in the View menu; or via the short dropmenu accessed by clicking the gear-shaped icon in a Finder window; or by pressing Command-J
    When you open View Options, one of the items presented will be a pulldown menu to adjust the font size; this applies to the names for files and folders -
    Change it to suit your needs.
    Re changing the font size for the main menubar, unfortunately there is no adjustment for that.

  • Bios Update for G400s Touch/ White spot on the screen

    When will be released g400s touch's new bios? G400s already have the update. That is incompatible with my machine.
    Recently, appeared a white spot on my device screen. It's small, but it's bothering me since the notebook only has 1 year of use. The warranty covers?
    Link to image
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

    That sounds like a stuck pixel, usually has to be more than one to be a warranty issue. Contact Lenovo Support to verify your warranty status and determine if your warranty will cover dead pixels and how many would trigger screen replacement.
    Good luck.

  • Frustration Rules on trying to install updates for Microsoft Office - Database daemon and Syncservices Agent will not close

    I am seriously bored of this bug!  Why oh why can someone not send out a 'bug fix' to correct this constant error.  Every single time I try to update Office Microsoft Database Daemon and Syncservices block the update!

    Ask on the Microsoft Mac forums since it's their product you're having trouble with.  these forums only provide support for Apple products
    http://answers.microsoft.com/en-us/mac

  • Running an update for Premiere Pro CC (2014) and the update has frozen at 42%

    What do I need to do to get the update to resume?   Or do I need to reinstall the update completely?

    This is an open forum, not Adobe support... you may get better help from Adobe staff
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • HT1386 updated computer to windows 8.1 and the iphone does not show up in itunes

    updated my computer to windows 8.1 and now the computer recognises the phone but will not show it in itunes, how can i fix this

    Hey there gunfier,
    It sounds like your iPhone is not recognized in iTunes after a recent Windows update. Use the troubleshooting from this article to resolve the issue named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Here is an overview of the troubleshooting that you'll do:
    1. Update iTunes
    2. Check the USB cable
    3. Verify that Apple Mobile Device Support is installed
    4. Restart the Apple Mobile Device Service
    5. Verify that the Apple Mobile Device USB Driver is installed
    6. Check for third-party software conflicts
    Also, check for 3rd party plug ins that may be interfering with iTunes:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/ts3430
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

Maybe you are looking for

  • Strange problem with SQL query in toad.

    Guys, My colleague is up with a strange problem with an SQL query that if it is run in toad encounters the "ORA-03113: end-of-file on communication channel" problem,but if run in SQL plus executes just fine. Do anyone have thoughts about this strange

  • Network Load Balancing and failover for AFP Sharing

    Dear all, Somebody kindly teach me to use round robin DNS to perform the network load balancing, it's success but not the failover. I have 4 xserve and want to do the load balancing and failover at the same time. I have read the IP failover document

  • How do I Update Twonky on NSS324?

    Hi The twonky server on NSS324 has bugs and will need to see if there is a new twonky pkg available for NSS324. If there is one where can I find it and how can I update it? Abhijit

  • Am I OK to turn off my Time Capsule?

    I bought my TC principally as a wireless external hard drive but have connected my old wireless router into it and am using the airport feature as well which is fine. I only use my mac for 30 mins some days and other days not at all, am I ok to turn

  • Monitoring Hardware Status HP ESXi with HP SIM, Get information by SNMP

    Hi. Check out to tring this steps http://h30507.www3.hp.com/t5/Technical-Support-Services-Blog/6-Simple-Steps-to-Monitoring-ESXi-with-... It's ok, I having health hardware  status for the server in the HP SIM 7.3 by wbem with Custom HP Image ESXi 5.5