Bios update from live, now no display?!

Need help!
Updated and computer turned off, reset to no display?
Tried resetting CMOS but no joy
HELP

Stop opening multiple topics or posts on other threads for the same problem but add any useful details as you have been asked to already.
Stick to the original topic: https://forum-en.msi.com/index.php?topic=181138.0. This one gets -- locked --

Similar Messages

P35 platinum combo will not boot windows after bios update via Live Update

Hi,
I had everything running on windows 7 fine until 2 days ago. I installed Live Update from MSI website. I was about to install driver updates for my motherboard, but the bios update went instead. my pc tried to restart after the bios update installed, but it failed. would not post and would only see black screen.
then i removed one of my memory sticks. it would post, but then windows would not start up. it would get stuck at windows loading screen. i tried to reformat with my windows cd. but during install it would blue screen of death me. i tried multiple times and it would always blue screen of death with different errors. the last one i remember was a message saying i should off turn shadowing and caching.
this all started happening after i attempted bios update via Live Update.
Any help is greatly appreciated.
I have a core2quad 9450
this motherboard
MSI P35 Platinum Combo LGA 775 Intel P35 ATX Intel Motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130141
this ram
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1000 (PC2 8000) Dual Channel Kit Desktop Memory Model F2-8000CL5D-4GBPQ
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231145
this harddrive
Mushkin Enhanced Chronos MKNSSDCR120GB 2.5" 120GB SATA III MLC Internal Solid State Drive (SSD)
http://www.newegg.com/Product/Product.aspx?Item=N82E16820226236
this video card
XFX PVT88PYSF4 GeForce 8800 GT 512MB
http://www.newegg.com/Product/Product.aspx?Item=N82E16814150280
Thanks!!!

at a guess you need to reset bios to ahci
a bios flash defaults to ide mode

Where can I dowload bios update from hp website?

As I need a bios update to do my bios recovery on my tablet which is now black screen issue by updating new bios update. However, now hp removed bios update from its driver download page. Please help to provide me the new link for this download. Thanks!

Hey , Welcome to the HP forums. Without knowing which product you have I cannot provide you any links or information about BIOS updates. For information on finding your product or model number click here: Finding Your HP Product Model Number. Thanks.

890FXA-GD70 bios update via Live Updat & now won't load windows...help pls

Hi There
First off, please excuse the fact that I am not very experienced with the tech aspects of a home build (which this is & I bought off the builder), or any build for that matter..
I was getting a 'keyboard/interface' press f1 to continue error message, when I started my computer, along with most of the usb ports not working when windows 7 ultimate (64) sp1 (build 7601) loads.
Otherwise it was working fine..
So I deceided to follow the instructions of the Live Update tool & used the total installer to update the bios from American Megatrends V1.10 06/30/2011 to the latest bios. I know now that wasn't very wise (why is it even an option if it can do soooo much harm?).
After it updated the bios there was a question (which I don't recall of course), something about ROM I think and not being the same, with 3 choices to correct it and I'm pretty sure I went with the 1st option for it to be corrected.
So now when I turn the computer on it starts loading everything (I can get in to the bios setup), right after it shows the windows logo it flashes a blue screen with some type on it & goes to windows startup repair which of course doesn't help & tries to do a system recovery which also doesn't work.
I don't want to do any more damage by fiddling around with things I know little about.
I was encouraged to read in one of the post answers that if it gets to the point where Windows goes to load than the mobo is ok...hopefully!
Any assistance would be greatly appreciated.
Specs: (Copied from a Belarc Advisor scan)
O/S Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
Main Board: 890FXA-GD70, Bus Clock: 200 megahertz BIOS: American Megatrends V1.10 06/30/2011
Processor: 3.30 gigahertz AMD Phenom II X 6 1100T Multi Core Not hyper-threaded
Drive: ST3500418AS Hard drive 500 gig SMART Status: Healthy
HL-DT-ST DVDRAM GH24LS50 ATA Device (optical drive)
Optiarc DVD RW AD-728OS ATA Device (optical drive)
PSU: Corsair GS500
12 gigs of RAM 1. 2048, 2. 2048, 3. 4096 4. 4096
Display adapter: MSI R7850 Twin Frozr 2GD5
Local Drive Volumes: c: (NTFS on drive 0)
Hopefully that is the required info on the specs.
Thanks in advance for any assistance.
Rob

yes the BIOS controls the CMOS from that User interface with all the settings menus!
and yes its in there where you can see what Drive mode its set at!
if its using the older style BIOS like my board has and not a UEFI then in this heading set:
1: go into your BIOS (press Delete)
2: Integrated Perifirals
3: On-Chip ATA Devices
4: Raid Mode <--- the options for that should be in there if its the same and may have been set to IDE mode before the update but may be set to AHCI now after you flashed the BIOS via live update which is more then likely why your getting a BSOD as it in the wrong operating mode!

I\updated bios earlier from and now my paviliong6 skype mic is not working. other side can't hear?

Installed a BIOS update earlier and another driver update(do not recall which) and now my microphone does not seem to work with skype. The other side does not hear me.
OS win7 64 home premium.
HP pavilion g6.
No disk issues or any other application loaded.
Windows updates is on but non installed since yesterday when it was still working.
I tried to disable/enable the mic from sounds in control panel with no success.
When I test the the mic in Skype I see the bars move when I talk, but the reply does not have sound.
Checked volume on machine and skype - set to the full bars.
Please advise.
Thank you.

iPhone warranty is valid only in country of original purchase. You must
return the iPhone to Dubai for repair/replacement. Apple will not accept
international shipments for repair nor will it ship out of the country where
repaired. If you did not purchase from Apple, contact the retailer where
you got the iPhone to see what their policy is.

Update failed, phone now just displaying logo and update bar, how do i restore my phone?

Latest update has failed, my phone now only displays the apple logo and the update bar, How do I restore my phone?

Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

6710b notebook bios update from F.0B to F.10 or above

I have 3 HP notebooks here - all 6710b. All have XP Pro SP3 installed on them on replacement hard drives (no HP restore partition).Two of them have BIOS version F.0B and the third had version F.10.I downloaded the HPQFlash update for F.20 from the HP support site and ran it on the F.10 notebook as it wasn't fully installed and I could use it as a test machine.Everything went swimmingly well. It updated without a hitch and runs just fine. However, trying to update the other HP notebooks from F.0B to F.10 or higher. there doesn't appear to be a way to do it.
The HPQFlash utility (for F.20) tells me its not compatible and to update to at least F.10.
Earlier BIOS updates tell me to "Copy the SoftPaq to the file store". What *IS* "the file store" and there's no "softpaq" anything with the download???? That's where the RTF instructions just stop - there is no further info on what to do.They also say "This package is used to flash the System ROM on target notebooks in a network" - these laptops are stand-alone and do not/will not connect to a network and as far as I know they do not have SSM.
The instructions are not clear on what to do.The support pages just tell me to follow the instructions and voila - your BIOS update is complete!It has no help when the update will not do what it's meant to do or if it fails. Typical HP!
I have a DOS bootable USB stick and can boot from it to run other DOS-related stuff.
I can run the Rompaq exe and it will save the current bios but when I try to update it, it tells me it cannot read the media and I have no option but to abort the process.
So now I'm stuck!
Any suggestions on how to get from F.0B to F.10 or higher so I can run the HPQFlash to F.20??

Chris_82 wrote:
The HP Support Assistant application is recommending me to update the bios from my current F.12 version to F.17.
After reading several posts about my laptop model being "bricked" up after trying to install earlier bios versions from HP (F.15) I'm reluctant to update the version I now have.
Is there any benefit to updating to the F.17 version?
Has anyone had any problems going from F.12 to F.17?
Thanks,
Chris Hutchinson
F.17 resolved the issue where the BIOS upgrade fails. It should be safe to run. If you're not having any problems, I'd probably hold off until a later BIOS comes out that includes fixes/enhancements.

How do you delete bios update from computer?

i installed the bios update for my touchsmart 310-1125f computer and now i want to delete it cause i dont have the blue hp screen that appears when i turn on my computer. i get a black screen with stuff on it and F10 setup message at bottom of screen. i tried to use my recovery discs that i made but i get a message saying that the discs arent for my computer. ive used the discs several times before without any problem. i contacted hp about the problem and theyre sending me some recovery discs but i doubt theyll work cause the ones i made wont work now. the person from hp told me to press F11 when i start my computer. I did that and it started to do a recovery of factory restore image i thought my discs were working but it never asked to insert disc 2. i have an hp pavilion computer that has windows 7 on it and before windows 7 was put on it i did a bios update on that and i never had a problem with a black screen with stuff on it appearing. The black screen on the touchsmart computer is really annoying i liked the hp blue screen with the stuff on the bottom of it better. Any help would be greatly appreciated. Thanks

What computer are you using?

(P67A-GD65) BIOS update worked but now ACPI dead?

Hi guys, anyone seen this before?
P67A-GD65(b3) + i5 2500K + G Skill Ripjaws 1600 + MSI GTX560 (all about 1 week old)
Did a successful BIOS update to 1.B (which is what the AU msi site listed as latest BIOS, I now realise that 1.C is out).
Everything seems fine in BIOS but Win7 hangs at "Starting Windows" (regular boot, repair boot, even the install setup boot from disc).
Booting from a Linux cd it hangs at the ACPI part.
System was perfectly stable prior to this (but my mouse didn't work in BIOS and XMP timings didn't seem to be applied, hence the update).
BIOS update was done using forum USB tool. CMOS has definitely been cleared.
Any suggestions? I am probably going to try updating to BIOS 1.C but since I don't have a working PC now (posting this from our iMac) I will have to go use a friend's PC to run the USB tool and create the BIOS update stick.
Thanks

Quote from: HU16E on 26-June-11, 12:17:16
For a short term test, raise DRAM V. manually to the maximum 1.65v's, set CPU V-Droop to low, phase control from SVID to APS.
I did try a raised DRAM V at one point (to no success), but didn't touch phase control so could try that too.
I have found one single way to make it load windows - by flashing 1.C directly from the "M-flash" page of the BIOS itself
The on the reset directly following the update it will then boot windows correctly.
This first happened this afternoon and I rejoiced and then shutdown to reconnect all the devices that had been unplugged during diagnosis ... then when I went to boot up again ... hung ... again
Tried to get all scientific by trying voltage settings and unplugging case fans, etc ... nothing work so I gave up, did something (theoretically) foolish and tried the M-flash page in BIOS again. Re-flashed v1.C again and once again it booted into windows
Starting to think along the lines of RMA here ... this can't be normal.

Bios update from 1.60 to 1.70 on Satellite Pro A300

Satellite Pro A300 got new infromation from Toshiba Tempro that there are new
bios available. I was downloaded and upgrading bios from 1.60 to 1.70. The problem are
that machine going totally JAM middle of bios upgrade. InsydeFlash show that bios upgrade
are going "Erasing and writing" but nothing happened. Machine is totally JAM!
What I can do now? I have power on machine and not yet rebooted from power key because
I fraid that bios update is not ready yet.
PLEASE HELP ASAP!

Hello
Please contact nearest authorized service provider and ask for help.
If BIOS update is not done well the BIOS chip can be damaged and notebook will be death.
Contact them and explain the situation. They will help you.
By the way: what do you mean with JAM? Is notebook going OFF in the middle of BIOS update?
Have you switched it OFF?
What was happening exactly?

H61I-E35 (B3) BIOS Update from 5+ to 6 version.

Hello,
1. When I firstly wanted to Upgrade from 5.2 to Version 6.0 that was on 01.06.2012 I was FAILED.
I have putted USB stick in Front USB port (on my case) and launched EXE file from USB FLash and got:
BIOS Updating ________ File not Found Message.
I went to my Service and they reflash bios on this M/B to 5.2 version.
For Now I have 5.2 BIOS version on my Mobo.
You can see details in this topic: https://forum-en.msi.com/index.php?topic=159364.msg1169080#msg1169080
2. Now I want to buy Ivy Bridge processor for my PC.
I need to upgrade my 5.2 version to 6.3 located in http://www.msi.com/product/mb/H61I-E35--B3-.html#/?div=BIOS
So here is my questions:
2.1 Please could you provide me steps to complete this action?
3.1.As I see for now, I can Download bios (exe file) put in root directory on flash (FLAS INSERTED INTO BACK!! NOT FRONT!!! USB port)
and launch exe and after reboot Bios will be updated.
3.2. Second variant is to use https://forum-en.msi.com/index.php?topic=161145.msg1181017#msg1181017 described method
So, please advice, how to flash my mobo!!
Thanks in advance!

There are several ways to update.
You can use the MSI package:
http://www.msi.com/product/mb/H61I-E35--B3-.html#/?div=BIOS
Look for the SOP in the description how to use the utility.
Safer way is to use the Forum Flasher: >>Use the MSI HQ Forum USB flasher<<
Use the attached archive and use mode 1 of the flasher. Do not extract the archive.

Bios update hung up, now system does not boot

Hi,
I just got my new system 2 says ago and installed a win 8.1 on it. My pc froze at random so I checked the website and saw that there was a bios update saying windows 8 users should update.
I downloaded the file, ran it and it hung up in the middle, I left it for about an hour and it was still stuck there...I reset the pc and boom, it wont boot up. It just gives 2 consecutive beeps every 5-10 seconds or so. Is my mobo dead? Please help! I JUST bought this case...
EDIT:
Sorry I was so upset that I even forgot to mention my mobo model:
Mobo: 990FXA-GD80
Bios version: I don't know!
CPU: AMD 8350
PSU: 630 thermaltake
HDD: 1 TB seagate
RAM: 8 gb kingstone
VGA: Sapphire 280X

msi have been told about Live update BIOS Updates being bad many times but they keep it in !
you have 3 options!
1: have a shop that can do SPI BIOS flashes to direct flash the BIOS chip to revive the board!
2: RMA it to MSI for them to re-flash the board!
3: get a new board!
1+2 or the cheapest routes to take! 3 is more expensive!
(DO NOT USE LIVE UPDATE its dangerous as it does BIOS flashes in a uncontrolled environment (Windows) as there is other data and processes active) <-- if you do use live update just use the download function only and perform BIOS flashes in M-Flash, DOS or using the forum flasher as there much safer!

X58 Pro BIOS update from 7.3 to 8.x

Hi.
I've thought of updating my the bios of my X58 PRO but I've hesitated as I'm not sure if the new 8.x bios versions are meant for my mb. 8.e is the latest I think.
I was wondering if anyone on the forum had any experience on the subject? I saw one old thread with someone thinking the same thing but wasn't quite sure how it worked out for him.

Well atm I'm having problems with my DVD-drive giving me DMA errors whenever I'm trying to burn a DVD. I've looked into the matter and nothing seems to be helping so I thought of updating the BIOS.
Even though a BIOS update might not help with my current problem, I'm still interested to know whether it is possible to update BIOS from 7.3 to 8.e.
I read from somewhere that this was not adviced because 8.x versions are meant for X58 PRO SLI
MSI automatic updating also didn't even suggest any updates for my BIOS. I know not to flash from MSI LiveUpdate, I just ran it to check for updates.

BIOS update from bootable CD

Hi everyone!
It is probably a stupid question but I hope to become less stupid by asking it:
How do you create a bootable cd for BIOS upgrade with the files provided in the support area of this website???
precisely with this file here...
http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU
...how do I do that???
Option 2: Update with CD-ROM
1. Extract the zip file containing the BIOS upgrade to a temporary folder.
2. In the temporary folder three sub folders will be generated. "docs", "Update - 3,5' Disk",
"Update - CD-R or CD-RW"
3. How to make a bootable CD-ROM please read the *.pdf file in the "docs" folder.
this tutorial is taken from this website as well. And the Qosmio G50 isn't listed anywhere on the page even though its BIOS update downloading page was pointing to it.
When I download the file i only get a zip containing an *.exe file which I anyway can't run since I am not on my broken Toshiba (wouldn't have to upgrade bios from boot otherwise)
Can somebody help me being less stupid^^please?

^^You must understand that I don't want you to read all my postings. Neither did I mean to be rude by thinking "Go fetch my link and help me out!" I was just afraid that later, someone wanting to read about BIOS upgrade would read my thread and would end up reading about a guy's problem to install OS. That is why I posted the link. To avoid any digression and to stay as clear as possible regarding my request of BIOS update information...
I had some people telling me to try a bios update.
BIOS updates are sometimes related and needed to 7 installation on some particular laptop models.You can find the list somewhere on toshiba's website.
But you are right Qosmio G50-12f is not listed by Toshiba as needing a bios update before installing 7. and it's pretty recent too.
I am not willing to play around with my bios.And you just comforted me that I shouldn't have to!
but well, just for the sake of knowledge, do you think there is a particular reason why not to make this update available from a boot option? Which seems to me a pretty useful feature in some cases...
Anyway, thanks a lot for your advices!!

Satellite L300 does't run after BIOS update from V2.10 to V2.20

Hi
I just installed BIOS V2.20 over the Bios V2.10 for my Toshi Satellite L300 over Windows XP.
Afterwerwards the Machine starts and shows just the XP starting window and the restart that I have the options save restart or normal restatr.
Nothing runs any more? Even starting from Windows-CD has no effect.
Who can help?

Thanks for you suggestions, but F2 did not help.
I performed the Bios update because on the website of Toshiba, there was written, hat the update increases function of the system.
I just called the update service. They mentioned I should reinstall Win XP, because my Computer starts, but Windows is not starting.

Bios update from live, now no display?!

Similar Messages

Maybe you are looking for