BIOS update or not for K8D Master3

At this moment we are looking for a CPU upgrade (running at this moment 2 x Opteron 240) for the K8D Master3 (MSI 9161 ), the choise is proberly the new Opteron 252 .
Can somebody tell me if I need a BIOS update for the K8D Master 3 before adding this CPU's .... ??

Just try it with 1 CPU and see if it boots.

Similar Messages

The announcement Ready for BIOS update does not come with T4400c !

I downloaded the Bios. I accomplished this steps
1 Extract the zip file containing the BIOS upgrade to a formatted floppy disk (please see note below regarding which type of disk to use).
2 Ensure the Notebook is connected to the mains.
3 Turn the Notebook off.
4 Turn the Notebook on with the F12 key. Keep the key pressed until a short beep can be heard.
The announcement Ready for BIOS update comes not and does not get ahead not.
How can I solve the problem?
(http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS&FID=TRO0000000b07)

Hi
I think its really an oldie.
Did you download really the compatible and right BIOS?
I have checked Toshiba driver page and I have found BIOS version 1.00 and 1.2.
As in the Toshiba document described you have to use the Update procedure 7.
If it doesnt work so in my opinion you have used wrong BIOS.

What's new in the BIOS Update v2.00 for Satellite L505-144

What's new in the BIOS Update v2.00 for Satellite l505-144
Thanks

Hi mate
As far as I know Toshiba European driver page does not provide any details what has been changed in the BIOS.
But I found some details on Toshiba US page.
It seems that Fn+N+1/2/3/4 debug function has been removed in BIOS 2.0 to avoid keyboard abnormal behavior.
Greets

BIOS Update Release Notes

Hi,
I have seen that there are many BIOS updates, versions 6.50, 6.60 and 6.70 but no release notes with documentation on the new features or resolved caveats.
Doesnt provide Toshiba with this information?
I expected to have enough information to decide on update by myself.
Any of you have more information?
Regards,

Unfortunately on European Toshiba page Toshiba doesnt offer such notes, just BIOS update.
What you can do is to check BIOS update version on US page - http://support.toshiba.com/drivers
There you can find info what is new in certain BIOS update.
Anyway, if your notebook runs well and stabile BIOS update is not necessary.

H61M-P23 (B3) BIOS update is not yet completed, please insert the USB pen drive.

Hey,
I attempted to update my BIOS, but the power went out in the middle of it. I cleared CMOS, and when I tried to use the EIVB.bin file to boot up a bios, It only says A2 in the corner. Without a flash drive in it says BIOS update is not yet completed, please insert the USB pen drive and reset the system. Any ideas on what to do?

Quote from: dmartinez2317 on 22-October-14, 08:43:14
Hey,
I attempted to update my BIOS, but the power went out in the middle of it. I cleared CMOS, and when I tried to use the EIVB.bin file to boot up a bios, It only says A2 in the corner. Without a flash drive in it says BIOS update is not yet completed, please insert the USB pen drive and reset the system. Any ideas on what to do?
Move USB key to another USB port and retest, use backside one.
If no change have a try with another different USB key,
and copy the EIVB.bin file to the newest USB key and retry.

M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update

M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update
Bios
FBKTB0A
3/31/2015
The bios shows updated and i can go into the bios but the ram amount and frequency does not show rite and it also does not want to boot any of those items.
Please advise.
Thank You

Hello all,
I, too, found this oversight on the part of Lenovo to be quite distressing. It is possible to upgrade the X61 BIOS with a USB thumb drive. I have provided directions at http://ubuntuforums.org/showthread.php?t=817897
The above tutorial is aimed towards Ubuntu Linux users. However, I believe that users of Vista should be able to follow along. Please let me know if you have any questions... the process is simple enough that it should be possible with any OS out there right now.
Mike

Satellite Pro L300-EZ1004X - TouchPad stopped working, BIOS update does not help

I have a Satellite Pro L300-EZ1004X laptop. Few days ago TouchPad stopped working. This is not a Fn + F9 issue.
In Device Manager it looks like hidden device and has (!) on it. Re-installing Synaptics drivers, updating them, removing the device in Safe Mode - nothing works. (TouchPad did not work in Safe Mode). One of the forums mentioned BIOS update. For some strange reason the latest BIOS for this specific laptop is from 2008 (ver. 1.5). Other L300 laptops have option to update BIOS to ver. 2.20 (2010) but not mine! I tried to load it (ver. 2.20)from Windows and from boot disk without success. I installed BIOS ver. 1.5. After reboot - keyboard stop working! And TouchPad ... still dead and still appears as hidden device. Using external mouse I restarted the laptop and get into the BIOS settings. In Advanced Settings disabled TouchPad completely. KEYBOARD START WORKING IN WINDOWS!!!
Any suggestions on how to make this TouchPad to work? Or how to get newer BIOS for this Laptop?
Thank you in advance!

Sounds like it has died, you can purchase a new one from a parts supplier and pay someone to install it or if you are any good with such things you can try to do it yourself. I suggest just sticking with the external mouse.
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

System Update Flash BIOS Update "Did not install"

Twice now I have experienced a problem using TVSU to update BIOS (Versions 1.58.0.0 and 1.59.0.0) in my ThinkCentre M92p. Each time the BIOS installs, but the message in the TVSU System Update "View installation history" window shows the Status as "Did not install." What could be causing this?
Solved!
Go to Solution.

Support is clueless, understood.
where the version 1.58/1.59 comes from , I have no idea
Bios doc states:
9. You may see a POST error "0162: Setup data integrity check
   failure" after reboot. It is a normal behavior. Press F1 to
   enter BIOS Setup Utility. If you are using WIN8 64-bit OS,
   change the Exit->OS Optimized Defaults to "Enabled", otherwise,
   please change it to "Disabled". At last, press F10 to save
   your settings.
==
If you installed this standalone, which you should. Your will probably see a failure 0162 which is normal per documentation. If this a Fail condition, i dont know. My Bios is older.
==
I am amazed to see su offer a bios update. ( power goes out, battery dead on laptop). This is a very senstitive update. .....The reposistory stuff I posted is just to peruse, look for 1.58. This is the SU package( written in xml. ). Not the acutal update.
I extracted your Flash code. No 1.58 anywhere.
IE,
download package for SU to use.. <wax (xml)
then actual download of package. What you can download manualy is not the same software Su is given.
==
Hope this helps. ? aways. Dont worry about what .xml is.   Your system SU aint working right for bios.
==
Simpler:
SU is given a xml file (text), to process to determine if update is needed.
Then it downloads the update, if you choose to install it.
Your symptom shows 2 versions of BIOS 1.58/1.59 did not install.   Crazy.
==
Maybe it got thru the xml package, and installed. then 0162. It worked correctly, but posted WRONG on your SU history. Either or, what you see on your screen sucks. 1.58/1.59, etc.

Satellite R830-143 - BIOS update does not support this operating system

Hi,
I received a notification via Tempro that a BIOS upgrade was available. I downloaded the ZIP file (bios-20120209125153.zip), extracted the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.
The package runs, gives the "Extracting files..." progress bar then displays a dialogue entitled "TOSHIBA BIOS Package Ver.4.1.2" that says: "This BIOS package does not support this operating system."
I am running Windows 7 Home Premium 64-bit on a Satellite 830R-143 with the short part no. PT32LE
Does anyone know what the problem is?
Thanks in advance for your help...

Notebok Satellite R830-14U (part ? PT32LE) with BIOS 2.70 & EC 1.10
after upgrade Intel Management Engine Interface v.7.1.52.1176 i can not update BIOS - error "This computer is not supported"
http://ru.computers.toshiba-europe.com/innovation/dodriverLanguage=42
The ME Interface provides thermal management for Intel Mainboards. The Intel Management Engine Interface (Intel ME Interface) is the interface between the Intel Management Engine firmware and the host. Drivers and applications on the host that wish to interact with Intel Management Engine through host interface would use the Intel ME Interface host windows driver.
Model: Tecra R850, Portege R830, Satellite Z830, Qosmio F750, Portege Z830, Satellite Pro S750, Tecra R840, Satellite R830, Satellite Pro R850, Satellite R850
Downgade Intel Management Engine Interface to 7.00.02.1164 and/or reinstall Value Update Pack (vap-2011-614162421.zip) does not solve the problem.
What else can I do to fix this problem?

3000 J205 Desktop (9686-A12) Bios Update "File Not Found"

Trying to download any updates/instructions for my BIOS results in "File Not Found" Page.
Flash BIOS update (diskette version)
Installation instructions for flash BIOS update (CD ISO image version)
Flash BIOS update (CD ISO image version)
Flash BIOS update (Flash from operating system version)
Installation instructions for flash BIOS update (diskette version)
Installation instructions for Flash BIOS update (Flash from operating system version)
Would prefer the CD ISO in case any problems are encountered.
Thanks
Jon

Thanks for sharing your experience!

Help! Bios+ME Z87-GD65 Bios update will not work

Hey everyone,
I'm having an issue, trying to update the bios. I'm currently on 1.3 and trying to update to 1.B to no success.
I have run live update 6.11 which found the new bios and went to install, but because i run win7x64 it looks for Intel Management engine driver which is not available for the board, as it appears, as its installing the Intel ME driver it comes up saying my PC doesn't meet the requirements, assuming that because of x64 OS. ((OR ITS TOO AWESOME)) So No bios update..
So i then used the files i downloaded from MSI website for BIOS 1.B, go to m-flash in the bios, follow the prompts for "bios flash with ME" and FROZEN!
Nothing happens and if i didn't knock the mouse i wouldn't have realized for some time.. No progress bar no anything, frozen screen, so i hit RESET ! Try again... nothing... Same ...
Any help would be appreciated.

Quote from: south.aussie on 17-December-14, 14:14:36
Hey everyone,
I'm having an issue, trying to update the bios. I'm currently on 1.3 and trying to update to 1.B to no success.
I have run live update 6.11 which found the new bios and went to install, but because i run win7x64 it looks for Intel Management engine driver which is not available for the board, as it appears, as its installing the Intel ME driver it comes up saying my PC doesn't meet the requirements, assuming that because of x64 OS. ((OR ITS TOO AWESOME)) So No bios update..
So i then used the files i downloaded from MSI website for BIOS 1.B, go to m-flash in the bios, follow the prompts for "bios flash with ME" and FROZEN!
Nothing happens and if i didn't knock the mouse i wouldn't have realized for some time.. No progress bar no anything, frozen screen, so i hit RESET ! Try again... nothing... Same ...
Any help would be appreciated.
For me, I don't use the live update to update my BIO, I followed this guide and it work wonder, its also EASY and simple. Make sure you READ and follow the directions.
>>https://forum-en.msi.com/index.php?topic=108079.0<<

H61M-P23 (B3) Bios update file not found

Hi everyone,
I tried to update my bios from version 17 to 19 so I have downloaded the bios file from here fr.msi.com/product/mb/H61M-P23--B3-.html#/?div=BIOS
I plugged my USB stick and moved the .exe downloaded previously into the root of my USB Key. I ran the file then my PC restarted and now I get this message "Bios updating... File not found"
What should I do ? I can't access to the BIOS anymore, I tried a clear cmos but it's the same issue I also tried to insert the CD ROM of MSI but I can't boot from it.
Thanks for you help

Quote from: dragoszdc on 09-July-12, 21:53:18
Hello,
I am having the same problem, but with the H61M-E33(B3) MB. Can anyone help me with that?
https://forum-en.msi.com/index.php?topic=159961.msg1172755#msg1172755

Bios update will not install

The HP assistant tells me there is an important bios update, I have downloaded and installed this several times, it still tells me the same update is needed. There have been no error messages. SSID 2AF7 VERSION 80.20APL SP 70148
i AM AT 2AF7 1.04 80.18

Hello @bc61,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your desktop computer is not able to successfully install a BIOS update prompted by the HP Support Assistant, and I would be happy to assist you in this matter!
To prevent the update prompt from reappearing in the future, I recommend following the steps in this document on Updating the BIOS. If the message continues to appear, I suggest disregarding the notification.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

After bios update, will not boot, says install an operating system

I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.

jwess wrote:
I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.

Problem in updating the notes for the service request

Hi All,
I am passing the following parameters to update the notes to the service request but not successful.
Can anyone let me know the workable solution.
set text
    ls_text-ref_handle = 1.
    ls_text-ref_kind   = 'A'.
    ls_text-tdid       = 'S001'.
    ls_text-text_object = 'CRM_ORDERH'.
    ls_text-tdstyle    = 'SYSTEM'.
    ls_text-tdform     = 'SYSTEM'.
    ls_text-tdspras    = 'E'.
    ls_text-mode       = 'I'.
    lv_txt = 'Centre Update request for:'.
    ls_lines-tdformat = '*'.
    ls_lines-tdline = lv_txt.
    append ls_lines to lt_lines.
    ls_text-lines   = lt_lines.
    append ls_text to lt_text.
clear ls_input_field.
ls_input_field-ref_handle = 1.
ls_input_field-ref_kind = 'A'.
ls_input_field-objectname = 'TEXTS'.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'LINES'.
CLEAR ls_fieldname-changeable.
lv_logical_key = '1'.
concatenate 'CRM_ORDERH' lv_logical_key into lv_logical_key.
ls_input_field-logical_key = lv_logical_key.
INSERT ls_fieldname INTO TABLE ls_input_field-field_names.
INSERT ls_input_field INTO TABLE lt_input_field.

Hi Surya
Please, use this FM:
DATA: lv_textobject TYPE thead.
lv_textobject-tdid         = <TEXT ID>.
lv_textobject-tdname   = <GUID OF SERVICE REQUEST>.
lv_textobject-tdobject   = 'CRM_ORDERH'.
lv_textobject-tdspras   = sy-langu.
CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
      header          = lv_textobject
      savemode_direct = 'X'
"      insert          = 'X'
    TABLES
      lines           = lt_text.
Hope this helpful!

BIOS update or not for K8D Master3

Similar Messages

Maybe you are looking for