BIOS update question for N650Ti-1GD5/OC BE

Can you tell mei fi the BIOS from the MSI website is newer then the Bios i currently have?
MSI Bios:
msi.com/product/vga/N650Ti-1GD5-OC-BE.html#/?div=BIOS
My current bios:
mediafire.com/download/lj4z7gyv68oziom/GK106.rom
GPU-Z screenshot:
mediafire.com/convkey/7ba9/2etxgs3atxvkhidfg.jpg

There is also NvFlash for Windows but it's also not just clicking. It's flashing a vbios and there should be as less software involved as possible to prevent bricking the card because of a software issue.

Similar Messages

BIOS update question for Qosmio F50-10k

hiya:
+This Bios Update adds increased functionality to your system.+
+(BIOS is an acronym for Basic Input and Output System. This program is stored in a Read-Only Memory chip on the motherboard.+
+When the computer powers up, the BIOS is launched to perform various start-up functions.)+
+For detailed update information please refer to Toshiba BIOS-Update Information+
+Qosmio F50 2.00-WIN32 Toshiba+
Is it going to work on toshiba F50-10k, Windows xp, sp 3 ?
[Notebook->Qosmio->Qosmio F series->Qosmio F50|http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU]
Message was edited by: kirekk

Qosmio F50-10k belongs to the PQF55E series.
If you want to update the BIOS you will have to use the BIOS exactly for the F50 PQF55E series.
The Toshiba European driver page provides BIOS for Vista 32bit and 64bit OS.
But this does not mean that you cannot use the Win XP
I think you can use the Win XP but fact is that the BIOS has been optimized for Vista and not for XP
The BIOS update should work also using XP but in some very rare cases the update could not be performed and in such case you will need the Toshiba preinstalled OS in order to update the BIOS

Bios update questions for KT4V

Hey, I updated my bios and I have been having trouble getting my mainboard to work properly. I found out that I had to clear my cmos after updating the bios (I didn't see anything about doing that in the bios setup area).
So I cleared the cmos, and I still have to detach the monitor from the video card for the computer to startup.
Another thing I have a question about is that when I startup the computer, it says that I have a 1250 processor, when I have a 2000+ processor. I adjusted the fsb speed to 133 (although I could have done something else?), and that "fixed" the problem, but after I turned off the computer it wouldn't turn back on again (four red lights in back, no matter what). I cleared the cmos again and the computer started up. Are there any settings I should leave alone? ?(

Okay, I set the fsb speed to 133, and the computer starts up, but only after I detach the video card, turn on the computer, turn off the computer, reattach the video card, and then turn on the computer.
All the lights on the D-bracket stay red, which is supposed to mean that the processor is damaged or not installed properly, but the processor works fine in other mobos, and I'm sure the processor is installed properly. The lights stay red until I turn off the computer, detach the vid card, turn on the computer, let it boot for a couple seconds, turn off the computer, reattach the vid card, and then turn on the computer, at which point the computer starts up normally.
I have no idea what the problem is.

Bios update UEFI for Pavilion dv6-6b13ss

hello guys,
Cant find the Bios update UEFI for my Pavilion dv6-6b13ss, tried everything possible still can't find, any solution please?
The other proplem i have that HP detect my computer model as Pavilion dv6-6b13ss but on the bottom of my device is written Pavilion dv6 6166ee so whats seems to be the proplem here?
PS : when update the bios with file HP presented for Pavilion dv6 6166ee i got the message that this bios update its not for this model.
thanks,

Hi @aliens1983
Welcome to the HP Forums!
It is a terrific place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are unsure of the exact model notebook you have as the auto detect states you have the Pavilion dv6-6b13ss but the sticker on the bottom states it is Pavilion dv6 6166ee .
It is most likely the former as that is what the tool detected after scanning your system for information.
Here is a link to How Do I Find My Model Number or Product Number? that may also help to clarify this for you.
Here is a link to the HP Pavilion dv6-6b13ss Entertainment Notebook PC Support And Drivers where it does list the latest recommended bios update as F.1C.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

BIOS Update Utility for Win8 x64?

I need to install a BIOS update available for the H430, but Lenovo doesn't offer an update utility that runs under 64-bit Windows. The instructions in the BIOS download say to download an ISO image file and burn it to a CD. That's fine, but I can't find any such file on the Lenovo site.
How do I install a BIOS update on an H430 running Win8 x64?

Quote from: GGMan on 24-May-06, 10:37:33
Hi, when I try to update the BIOS from 1.4 to 1.6 I get the following error message "The image file c:\....\7185v16\AWFL859G.exe is valid, but is for a machine type other than the current machine" . The reason I am doing an up date is because its detecting my CPU at 0 revs. But when i use another scoket on the MB (system fan) it reads it ok. And when I put the system fan into CPU, its ok as well . Hence the Update. Plus I cant get "live update 3.75" to work as get the following error all the time "service has not started" (not to bothered about this error). I am currently using XP Pro x64 Edition .
Regards
GGMan
ok, let me understand. you want to update because the CPU fan shows 0 rpms in BIOS. if you put the system fan on the CPU fan connector, then it shows a correct value for rpms? then the BIOS is not a problem, but the fan is. did you check if the fan was actually spinning or the connector was properly inserted? anyway, have you also checked if the BIOS version you want to flash to contains a fix for your problem? you can see that in the BIOS release notes.
it seems to me that you are trying to flash with the wrong BIOS. make sure that if you flash, you use the correct one for your mobo.

Request: UEFI GOP for N650Ti - 1GD5/OC BE

I would like UEFI GOP and also to know if there is a new vbios update for me. Thank you
Model: N650Ti - 1GD5/OC BE
S/N: 602-V287-23SB1303150963
I payed for an MSI product. I registred my GPU on the MSI website. Why am I not allowed to post attachements ? I'm not even allowed to post links to where I uploaded my ROM. How can I post my ROM ?
NVIDIA Firmware Update Utility (Version 5.134)
Adapter: GK1xx (10DE,11C2,1462,2876) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
Image Size : 98816 bytes
Version : 80.06.59.00.28
~CRC32 : FD572E1E
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK106 Board - 20300012
Product Revision : Chip Rev
Device Name(s) : GK1xx
Board ID : E307
PCI ID : 10DE-11C2
Subsystem ID : 1462-2876
Hierarchy ID : Normal Board
Chip SKU : 240-0
Project : 2030-0012
CDP : N/A
Build Date : 03/01/13
Modification Date : 03/28/13
UEFI Support : No
UEFI Version : N/A
UEFI Signer(s) : Unsigned
Sign-On Message : GK106 P2030 SKU 12 VGA BIOS
MSINV287MS.350

can't locate such for this card, >>How to contact MSI.<<
Quote
I payed for an MSI product. I registred my GPU on the MSI website. Why am I not allowed to post attachements ? I'm not even allowed to post links to where I uploaded my ROM. How can I post my ROM ?
its spam protection, you need more posts to be able to post links.

Windows 7 - BIOS update question - Satellite A350-13A

Hi,
I have the Toshiba A350-13A for Poland.
It came with Vista 32 bit system. I would like to install there Windows 7 64 bit.
So I have a question for BIOS update.
In my toshiba model driver section for WIN7 there is only a 32 bit BIOS for OS independent, but in the Vista section there is a 64 bit BIOS.
So shall I stay with the 32 bit BIOS or update to Vista 64 bit BIOS?
best regards.

Hi
Do you have any performance or notebook issues using the 32bit BIOS?
If everything is working properly then leave the 32bit BIOS on your notebook.
I would recommend updating the BIOS only if some serious problems would appear
Cheers

BIOS update available for Windows 8 on 7

Greetings,
I'm running Windows 7, and the only BIOS update is under the Windows 8 dropdown list on the product page
http://esupport.sony.com/US/p/model-home.pl?mdl=SVE15113FXS&LOC=3#/downloadTab
Is the BIOS update listed under Windows 8 also compatible with my Windows 7 laptop?
Yours,
Joe

Hi Cnidocyte,
Welcome to Sony Community!
I already answered your other post, please refer to this link for my reply. Thanks.
Jen
If my post answers your question, please mark it as "Accept as Solution"

GX70 Destroyer V bios update questions

Hello all,
Just wanting to get some info from msi or anyone in the know about a issues that has cropped up in MSI latest Video bios update for the GX70 Destroyer , before the Bios update the M290X Video ram is clocked at 1200MHz for bandwidth of 153.6Gb/s after the bios update which was done correctly by following MSI direct instructions, it has down clocked the Memory speed to 900MHz for 115GB/s, has to be a bug in the latest video bios MSI has provided i wonder if anyone has anything information out their about this, since it does effect performance i have noticed.
Thank you very much.

What's the VBIOS version you have now?

BIOS Updater tool for laptop says it is not comptible with laptop.

I have a Satelite C855D-S5106, and Toshiba says, when I go through all the dropdown boxes to select my model of laptop, that there are two (one older, one newer) BIOS updates for this laptop. However, when running either update tool, they both give me a notice, stating that they are not compatible with my model of laptop.
What do I do now?

The Toshiba service station can also update the bios.
Your support page is here - Support page
The newest bios update information:
Change History
Version 6.20 - 2013-01-21
Fixed: System hangs after settings are changed by TSS.
Added: CER key for a Smart DE issue.
This shows that it fix's system hangs after settings are changed by TSS (Toshiba service station), That tool shows you what updates are available, then downloads and installs them for you. Because of this I would update the bios though many believe that if its not broke dont fix it when it comes to the bios.
The Toshiba service station sometimes will show a bios update that does not apply to your laptop, it went away after a couple of weeks on mine.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Joshua-H61-uATX - Bios Update needed for CPU Upgarde - Sandy to Ivy? (HP P6-2260EA)

Hello, I have a Joshua-H61-uATX Motherboard. (It's an HP P6-2260ea PC)
I'm thinking of Upgrading my i3 2120 to a i5 3470 (Sandy-Bridge to Ivy-Bridge)
I know my motherboard supports it, but will I need a BIOS Update
I can not find a BIOS update ANYWHERE.
Thanks.
Also, Bios Version is: AMI 7.11 28/04/2012
This question was solved.
View Solution.

You don't need a BIOS update.
When it is stated that a CPU is supported in the motherboard specifications document it means that BIOS support is already present.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Bios Update Needed for Lenevo 3000 G530 on Windows 7 (32Bit)

I have searched the forum and found few topic, i also tried to flash the bios by my self but i was unable to do it.
I downloaded 6get19ww.exe from driver download and when i tried to flash i got an error message saying, " Cannot load driver C:\DRIVERS\BIOS\6get19ww\PHLASHNT.SYS. Please check your accounts, if you have no administrator privilege, please login again!. The Specified error has been marked for deletion. Error Code :1072. "
I had tried running the bios updated as administrator and i am doing all these from an administrator account.
I am running Windows 7 (32 bit) and would highly appreciate if you guys can help me out.
Thanks
Solved!
Go to Solution.

As soon as i press the power button i see the Name of my college, how can i remove it.
Link to picture
I hope this picture clears what i want to say, please help me how can i change this image.
Thnaks
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

T500 BIOS Update Question

I hope this has not been asked before as the Search option is slow tonight ..... What is the difference between the 2 variants of the the latest Lenovo Posted BIOS (3.22 and 3.24) as described below and also what is the difference between the 6F and 7V based computers and how do I tell which one I have (T500 2056-4QU in my case)?
Thanks!
                                                                   Revision : 01
Software name      BIOS Update Utility
Support models     ThinkPad T500
                   ThinkPad W500
Operating Systems Microsoft Windows 7 32-bit, 64-bit
                   Microsoft Windows Vista 32-bit, 64-bit
                   Microsoft Windows XP Home Edition, Professional
                   Refer to marketing materials to find out what computer models
                   support which Operating Systems.
Versions           3.22 (for BIOS ID 6Fxxxxxx-based computer)
                   3.24 (for BIOS ID 7Vxxxxxx-based computer)
WHAT THIS PACKAGE DOES
This package updates two sets of the BIOSes (including system programs and
Embedded Controller programs) stored in the following ThinkPad computers to
fix problems, add new functions, or expand functions as noted below.
- BIOS ID 6Fxxxxxx-based computer
      (Upper two alphanumeric characters of BIOS ID are 6F)
- BIOS ID 7Vxxxxxx-based computer
      (Upper two alphanumeric characters of BIOS ID are 7V)
This program is language independent and can be used with any language system.
CHANGES IN THIS RELEASE
<snip>
Two (I used to have Five) - T61p 15.4" WS T9300 2.5Ghz units, August 08/08 Builds with FX570M Nvidia Graphics; ... One W520 i7-2860QM w/2000M Nvidia Graphics (most recent acquisition and stupidly fast); .... One - T42 4:3 15" Flexview 1.8GHz with ATI Graphics (still perfect for traveling); ... Two - T500 15.4" units both with ATI HD3650 Graphics.
Solved!
Go to Solution.

'afternoon
looking at the readme, they look identical, from a "fix" standpoint.
there's one line near the bottom that makes me think that the 7V version is for machines with a discrete gpu/switchable graphics, as yours has.
ThinkPad T500 (2056-4QU)
T9400(2.53GHz), 2GB RAM, 160GB 5400rpm HD, 15.4in 1680x1050 LCD, 256MB ATI Radeon HD3650, CDRW/DVDRW, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, 6c Li-Ion, WinVista Business 32
to determine which one you need, launch msinfo32.exe and check the summary page for your current BIOS version. then just pick the one that matches yours, 6F or 7V.
hth.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

K7n2 delti Ilsr Bios update question

Well bios updates fix these ram issues? I have Kingston hyperx 3500, was on the ok list for ram, dont thank it is now. ;(
MICRO-STAR k7n2Delti ILSR latest bios and drivers
AMD 2800+barton
Fx5900 Gainward videocard
2 512 sticks of Kingston hyperX 3500 Inslot 2&3 at 2222
antec pp400watt Ps

Yes, I did mean the CPU. Corrected it now .......
Thanks, I've done that and it's now showing 1800. Much easier than updating the BIOS.
My temperatures have gone up a bit, though. CPU is now 47C (was 44C) and system is 37C (was 35C) in PCAlert4, and I'm only on the net and playing mp3s, so it's not exactly hard load!!. Is this OK? I really worry about overheating since my old mobo was unstable at lower system temps than this.
Louise

Bios updat help for msi x99s mpower board

Does anyone know the link for the msi x99s mpower motherboard bios updates ? i have the msi x99s mpower black and yellow motherboard i'm looking for the bios update link. because when i try to play game like csgo and h1z1 my game lags real bad and i know it is not the internet because i have tried 3 other pc on same line they all work fine and i even had my graphics card and hdd tested they all are fine so i am hoping it might be a bios issue

Quote from: Chike on 06-March-15, 10:07:20
First I don't think you or anyone should put up with having only 3 channel memory when they paid for 4. If the board or CPU are faulty they should be replaced.
You can start with MemTest86 or MemTest86+. MemTest86 has multi CPU test option that is more real life like, I don't know about MemTest86+, haven't used it for quite long time.
Before using Prime95, make sure you have CPU/Core temperature monitoring software such as RealTemp, Core Temp, HWiNFO, or CPUID HWMonitor.
Prime95, I assume th 64-bit version, but this create a lot of heat, what cooler do you have?
You can choose to run 6 threads instead of 12, it should be stressfull enough, also you can add the line Code: [Select]
CpuSupportsFMA3=0 to local.txt to disable FMA3 instructions that are more stressful on the CPU but not necessarily on memory.
If it is still too hot (>70c) add Code: [Select]
CpuSupportsAVX=0Do not close the window to stop the test, select exit from the file menu.
Or you can try OCCT which is all-in-one, stress + monitoring in one program. Select Large Data Set to stress memory. It also runs somewhat cooler than Prime95.
trust me i agree i talked to msi support and got no help they just kept telling me they know about the issuse and should have a fix for it soon, But yet i have seen many people say they have the same problem over 5 months now....... So i just talked to amazon and they said no problem they will give me a refund so now i need to find a good board to work with my i7 5820k 2011-3 pcu

BIOS update question for N650Ti-1GD5/OC BE

Similar Messages

Maybe you are looking for