BIOS Update Release Notes

Hi,
I have seen that there are many BIOS updates, versions 6.50, 6.60 and 6.70 but no release notes with documentation on the new features or resolved caveats.
Doesnt provide Toshiba with this information?
I expected to have enough information to decide on update by myself.
Any of you have more information?
Regards,

Unfortunately on European Toshiba page Toshiba doesnt offer such notes, just BIOS update.
What you can do is to check BIOS update version on US page - http://support.toshiba.com/drivers
There you can find info what is new in certain BIOS update.
Anyway, if your notebook runs well and stabile BIOS update is not necessary.

Similar Messages

Where are the BIOS update release notes - Satellite P300-Q01

I have a Satellite P300 Q01 - there have been two BIOS updates since I bought it W360 and W390.
Where can I find the release notes detailing what is fixed/changed in each release?
Thanks

Unfortunately you will not be able to find them. :(
I don't understand why but this info is not published.

3750X 15.2.1E3 Updated Release Notes

I'm trying to find the updated release notes for 15.2.1E3 on the 3750X platform.
The link given on the IOS download page has not been updated with the E3 release info:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-2_1_e/release/notes/OL29707.html
It only shows the caveats up to E2.
Thanks.

It looks like the folks in charge of that neglected to publish the updated notes. I checked it myself two different ways and found the same thing.
If you have a unit under Smartnet support, you could open a case and request the latest release notes.

The announcement Ready for BIOS update does not come with T4400c !

I downloaded the Bios. I accomplished this steps
1 Extract the zip file containing the BIOS upgrade to a formatted floppy disk (please see note below regarding which type of disk to use).
2 Ensure the Notebook is connected to the mains.
3 Turn the Notebook off.
4 Turn the Notebook on with the F12 key. Keep the key pressed until a short beep can be heard.
The announcement Ready for BIOS update comes not and does not get ahead not.
How can I solve the problem?
(http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS&FID=TRO0000000b07)

Hi
I think its really an oldie.
Did you download really the compatible and right BIOS?
I have checked Toshiba driver page and I have found BIOS version 1.00 and 1.2.
As in the Toshiba document described you have to use the Update procedure 7.
If it doesnt work so in my opinion you have used wrong BIOS.

H61M-P23 (B3) BIOS update is not yet completed, please insert the USB pen drive.

Hey,
I attempted to update my BIOS, but the power went out in the middle of it. I cleared CMOS, and when I tried to use the EIVB.bin file to boot up a bios, It only says A2 in the corner. Without a flash drive in it says BIOS update is not yet completed, please insert the USB pen drive and reset the system. Any ideas on what to do?

Quote from: dmartinez2317 on 22-October-14, 08:43:14
Hey,
I attempted to update my BIOS, but the power went out in the middle of it. I cleared CMOS, and when I tried to use the EIVB.bin file to boot up a bios, It only says A2 in the corner. Without a flash drive in it says BIOS update is not yet completed, please insert the USB pen drive and reset the system. Any ideas on what to do?
Move USB key to another USB port and retest, use backside one.
If no change have a try with another different USB key,
and copy the EIVB.bin file to the newest USB key and retry.

M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update

M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update
Bios
FBKTB0A
3/31/2015
The bios shows updated and i can go into the bios but the ram amount and frequency does not show rite and it also does not want to boot any of those items.
Please advise.
Thank You

Hello all,
I, too, found this oversight on the part of Lenovo to be quite distressing. It is possible to upgrade the X61 BIOS with a USB thumb drive. I have provided directions at http://ubuntuforums.org/showthread.php?t=817897
The above tutorial is aimed towards Ubuntu Linux users. However, I believe that users of Vista should be able to follow along. Please let me know if you have any questions... the process is simple enough that it should be possible with any OS out there right now.
Mike

After bios update, will not boot, says install an operating system

I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.

jwess wrote:
I have a amd hp 2000 notebook. i replaced the hard drive with an ss drive, windows 7. been working fine until the bios update, I bleieve, which lost the boot up parameters. how do I get it to boot. hard drive works well in another system so not that. getting the usual message, boot dvice not found, install an operating system, F2 diagnostics all pass. Hard disk (3F0) message
should one revert to earlier bios, usually not recommended. bios version 45 it says, so not sure the latest.

Satellite Pro L300-EZ1004X - TouchPad stopped working, BIOS update does not help

I have a Satellite Pro L300-EZ1004X laptop. Few days ago TouchPad stopped working. This is not a Fn + F9 issue.
In Device Manager it looks like hidden device and has (!) on it. Re-installing Synaptics drivers, updating them, removing the device in Safe Mode - nothing works. (TouchPad did not work in Safe Mode). One of the forums mentioned BIOS update. For some strange reason the latest BIOS for this specific laptop is from 2008 (ver. 1.5). Other L300 laptops have option to update BIOS to ver. 2.20 (2010) but not mine! I tried to load it (ver. 2.20)from Windows and from boot disk without success. I installed BIOS ver. 1.5. After reboot - keyboard stop working! And TouchPad ... still dead and still appears as hidden device. Using external mouse I restarted the laptop and get into the BIOS settings. In Advanced Settings disabled TouchPad completely. KEYBOARD START WORKING IN WINDOWS!!!
Any suggestions on how to make this TouchPad to work? Or how to get newer BIOS for this Laptop?
Thank you in advance!

Sounds like it has died, you can purchase a new one from a parts supplier and pay someone to install it or if you are any good with such things you can try to do it yourself. I suggest just sticking with the external mouse.
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

System Update Flash BIOS Update "Did not install"

Twice now I have experienced a problem using TVSU to update BIOS (Versions 1.58.0.0 and 1.59.0.0) in my ThinkCentre M92p. Each time the BIOS installs, but the message in the TVSU System Update "View installation history" window shows the Status as "Did not install." What could be causing this?
Solved!
Go to Solution.

Support is clueless, understood.
where the version 1.58/1.59 comes from , I have no idea
Bios doc states:
9. You may see a POST error "0162: Setup data integrity check
   failure" after reboot. It is a normal behavior. Press F1 to
   enter BIOS Setup Utility. If you are using WIN8 64-bit OS,
   change the Exit->OS Optimized Defaults to "Enabled", otherwise,
   please change it to "Disabled". At last, press F10 to save
   your settings.
==
If you installed this standalone, which you should. Your will probably see a failure 0162 which is normal per documentation. If this a Fail condition, i dont know. My Bios is older.
==
I am amazed to see su offer a bios update. ( power goes out, battery dead on laptop). This is a very senstitive update. .....The reposistory stuff I posted is just to peruse, look for 1.58. This is the SU package( written in xml. ). Not the acutal update.
I extracted your Flash code. No 1.58 anywhere.
IE,
download package for SU to use.. <wax (xml)
then actual download of package. What you can download manualy is not the same software Su is given.
==
Hope this helps. ? aways. Dont worry about what .xml is.   Your system SU aint working right for bios.
==
Simpler:
SU is given a xml file (text), to process to determine if update is needed.
Then it downloads the update, if you choose to install it.
Your symptom shows 2 versions of BIOS 1.58/1.59 did not install.   Crazy.
==
Maybe it got thru the xml package, and installed. then 0162. It worked correctly, but posted WRONG on your SU history. Either or, what you see on your screen sucks. 1.58/1.59, etc.

'HP Consumer Desktop PC BIOS Update' will not download due to flash.bat error.

Attempted to download the update -HP Consumer Desktop PC BIOS Update- and the error flash. bat does not allow the computer to complete the process. This is a new computer, so please adivise on how to fix the error. Thank you

Hi,
32 bit? Did you post this in error?
Install the latest diagnostics before attempting to install the latest BIOS update.
Contact HP Support since your PC is covered by warranty.
HP's support number is 800-474-6836 or 800-HPINVENT or online here.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Satellite R830-143 - BIOS update does not support this operating system

Hi,
I received a notification via Tempro that a BIOS upgrade was available. I downloaded the ZIP file (bios-20120209125153.zip), extracted the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.
The package runs, gives the "Extracting files..." progress bar then displays a dialogue entitled "TOSHIBA BIOS Package Ver.4.1.2" that says: "This BIOS package does not support this operating system."
I am running Windows 7 Home Premium 64-bit on a Satellite 830R-143 with the short part no. PT32LE
Does anyone know what the problem is?
Thanks in advance for your help...

Notebok Satellite R830-14U (part ? PT32LE) with BIOS 2.70 & EC 1.10
after upgrade Intel Management Engine Interface v.7.1.52.1176 i can not update BIOS - error "This computer is not supported"
http://ru.computers.toshiba-europe.com/innovation/dodriverLanguage=42
The ME Interface provides thermal management for Intel Mainboards. The Intel Management Engine Interface (Intel ME Interface) is the interface between the Intel Management Engine firmware and the host. Drivers and applications on the host that wish to interact with Intel Management Engine through host interface would use the Intel ME Interface host windows driver.
Model: Tecra R850, Portege R830, Satellite Z830, Qosmio F750, Portege Z830, Satellite Pro S750, Tecra R840, Satellite R830, Satellite Pro R850, Satellite R850
Downgade Intel Management Engine Interface to 7.00.02.1164 and/or reinstall Value Update Pack (vap-2011-614162421.zip) does not solve the problem.
What else can I do to fix this problem?

Elitebook 850 - BIOS Update Installer not downloadable

The BIOS Update that is advertised on your Drivers Page is not downloadable.
Driver page: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405106&swItemId=ob_144059_1&swEnvOid=415...
Filename: sp70045.exe
I checked on the FTP-Server, the file is not there, altough there are 2 files sp70045.cva and sp70045.html

The team would be updating the files. Please chaeck later.
or
Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Update release notes?

I have updated my phone (E50 without camera) software to latest version 6.41.3. Where can I find some sort of documentation what bugs are fixed, new features and so on?

Hi Moe78,
Nokia does not provide public release notes for software updates. For more information, please see the introductory text for the Software Updates board >>.
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

3000 J205 Desktop (9686-A12) Bios Update "File Not Found"

Trying to download any updates/instructions for my BIOS results in "File Not Found" Page.
Flash BIOS update (diskette version)
Installation instructions for flash BIOS update (CD ISO image version)
Flash BIOS update (CD ISO image version)
Flash BIOS update (Flash from operating system version)
Installation instructions for flash BIOS update (diskette version)
Installation instructions for Flash BIOS update (Flash from operating system version)
Would prefer the CD ISO in case any problems are encountered.
Thanks
Jon

Thanks for sharing your experience!

IPod Firmware Updates - Release Notes?

Does Apple release official 'Release Notes' with their software updates?
I was never able to find any 'What's New & Fixed' document on iPod Classic firmware updates v1.0.1 or 1.0.2.
Does anyone have any links to know what's new in 1.0.2?
I personally have a habbit of liking to read release notes before updating.
I know that 1.0.2 was a fix update, but would really like to know what exactly was fixed.
Please reply if you have any input.
Thanks.

MichiHenning wrote:
Looks like the new firmware fixes the Cover Flow problem that caused compilations with different artists to appear once for each artist.
However, it also looks like the firmware has introduced a new bug. For example, I have nine Emerson, Lake, and Palmer albums. When I look at these albums with the Cover Flow in iTunes, they correctly appear grouped together. However, when I look at these albums with Cover Flow on the iPod, those albums are split into three groups:
- one group of six albums, at the correct place (among the artists beginning with the letter "E")
- one group of one album (among the artists beginning with the letter "E", but near the end of the letter "E", out of alphabetical order)
- one group of two albums (following artists beginning with the letter "G")
There is also another bug for a compilation album in my collection. It's a compilation where the "Album Artist" field is set to "Various Artist", and the "Sort Album Artist" field is set to "Jazz A Saint Germain". Each of the songs has a separate "Artist" and "Sort Artist" field as well.
With iTunes, Cover Flow shows the album at the correct place, among the albums with artists starting with "J". With the iPod, Cover Flow shows the album in the wrong place, towards the end of the collection. In addition, the album artist that is displayed by iTunes (correctly) is "Various Artists" but, on the iPod, it incorrectly shows "Angelique Kidjo", which happens to be the artist for the first song on the album.
Looks like that firmware needs a little bit more work...
Coverflow is the least of my worries with the 1.0.2 update; I'm in the apple store as I type & got a new replacement 160gb iPod Classic Black.
I hope that this new one works a lot better.

BIOS Update Release Notes

Similar Messages

Maybe you are looking for