Bios Update....what is it?

Would anyone who is really informed be kind enough to tell me about the 'BIOS Update' that is talked about on Toshiba website? Is this really needed ... does it make any difference if I dont download it?
[email protected]

Hi
On the Toshiba website you will find newer BIOS versions. Sometimes the BIOS update procedure can solve some strange issues which occur on the notebooks.
But the BIOS upgrade is a serious procedure. If you use the wrong BIOS or wrong procedure so its possible that you will damage the motherboard.
Well, in my opinion if you dont have any serious issues on your notebook you dont need to make any upgrades. Never change a wining team ;) you know.
There you will find the BIOS:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
http://www.toshiba-tro.de/subpage/bios.html
And there you will find very useful and important informations about BIOS upgrading:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS&FID=TRO0000000b07

Similar Messages

New gs70 bios update, what does it mean?

So there is a new bios update out for the gs70 2pc stealth pro.
It has this description: Set NV GPS function ready flag to EC RAM
I have no clue what this means for me so also not whether I should apply it or not. I know that the general rule is not to update your bios unless necessary, but I'm kind of an update freak.
Any way I'd appreciate it if someone could explain.
I'd appreciate it even more if MSI could have more explanatory change logs as with most of their updates it is obscure or missing.
Cheers!

bios update is only required if you occur issues with your bios if you have no bios problems then bios update is not recommended, but if you find problems with it such it doesent save some settings and so on then you shall update your bios so remember never update bios unless you got critical issues with it.
Mine had problem on bios that it some how would lay off once you etc disconnect msata then it would freeze with black screen and a "-" symbol on the screen :/ so yeah i should of flashed newer bios when i had the time before bios died on me so atm mine is on repair :(

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

What's new in the BIOS Update v2.00 for Satellite L505-144

What's new in the BIOS Update v2.00 for Satellite l505-144
Thanks

Hi mate
As far as I know Toshiba European driver page does not provide any details what has been changed in the BIOS.
But I found some details on Toshiba US page.
It seems that Fn+N+1/2/3/4 debug function has been removed in BIOS 2.0 to avoid keyboard abnormal behavior.
Greets

What are possible issues during BIOS update?

Hello everybody,
I am having a problem with the battery of my old Toshiba - 'plugged in, not charging'
Searching the internet I found out that the BIOS update could possibly solve the problem.
On the other hand the BIOS update procedure can itself cause some sever problems....
Does anybody know what precautions can/should I take to avoid such problems or be prepared to resolve them easily... something like BIOS recovery disk, etc?
Many thanks in advance
IG

Hello
In worst case the update could fail and destroy the ROM module. That means the computer will not boot anymore the ROM module must be reflashed from a notebook technician. Thats fact!
But if you have any problems with battery charging control I must agree MisterX because I doubt it has something to do with BIOS. I mean even with oldest BIOS version, the battery will be charged if AC adapter is connected because its hardware controlled and has nothing to do with BIOS.
In my opinion you should try another battery and/or AC adapter. Important point is that a battery can be recharged only 500 times after then you must replace it.
Check this!!!

What's the bios update for my board at?

Hi everyone .. i haven't been here in a long time. Was just wondering what the bios was up to for my board now. And where can i get it. Also if anyone has used it on a board like mine what luck did they have with turbo settings?
Thanks again.. bd

Check the MSI website, for bios updates...........

Tecra A9 - What are the changes in the new Bios update

Can someone tell me the changes in the actualy BIOS Update v1.70 and the old ones?
And is there a PDF outside where i can see the detailed description about the Bios functions?
Thanks
Greetings

So, until now my question has no answer!
In the US Forum is the Service from Toshiba is much more better ->
[BIOS details|http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1978903&moid=1702318&rpn= PTS53U&BV_SessionID=@@@@2130665852.1205800119@@@@& BV_EngineID=cccjadedikgfkdgcgfkceghdgngdgmn.0&ct=D L&all_docs=false]
I also must send my Tecra A9 to the support to change my DVD-Burner (Teac) and it taks 3 Weeks.
I am not very happy with this support at all!
Now Toshiba has released a new Bios Update v2.10 and i didn't now what are the changes.
Greetings

What BIOS update to use for Acer Aspire V5-571P?

I'm having the 'Battery Not Detected Issue' and a BIOS update seems to be the answer. I just can't figure out what the right update is. Screenshots with system details included, because I don't know what information is needed. Thanks.

Hello, On your picture, you can see "BIOS Version/Date: ...V2.17...". The right uptdate is the V2.18 (last version).

Failed bios update on Z87-GD65 gaming, now what?

I need a bit help with getting my Bios A up and running again.
I just tried the latest beta bios. Never had any issues with these. Downloaded to an USB stick, switched to bios, updated, the computer reset by it self and it installed the ME stuff and rebooted again.... and from there it was dead. Not even the debug leds are on. I guess something went wrong.
Afterwards I booted with the second bios which is still fine. I went to windows to get the old bios, downloaded it, extracted it to the stick etc and booted with the stick in the computer but nothing happens.
Can someone tell me how to get my Bios A back in action?

I read pjakuszews earlier post , and his way of solving it, solved my problem too.
1) downloaded intel flash programming tool http://downloads.hwbot.org/downloads/BIOS/Z87/FPT_v.9.5.0.1428.rar
2) booted with the working bios, and dumped that with the "fptw64 -d biosb.bin" command
3) switched bios on the mainboard right after while everything running
4) flashed the bricked bios with "fptw64 -rewrite -f biosb.bin"
5) rebooted and back in business.

Bios update not engaging. computer stuck in bios update

My computer HP Pavilion g2 notebook is stuck in hp bios update mode and although updated bios was downloaded it doesnt engage. At the very least how can i get it back to its original state of operation?

HI papacruz623:
I will be glad to help you!
I gathered that you tried to update the bios, and now it is stuck. I am sending you documentation on HP Notebook PCs - Recover an Earlier Version of BIOS click here.If you require any further assistance I will need some more information. What model number of G2 notebook you have, and the operating system.How Do I Find My Model Number or Product Number? click here
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Satellite A110: Graphic card is only at 64MB after traditional 1.70 Bios update

Hi!!
I have toshiba satellite A110. I've upgraded my bios to 1.70 version but now my video card is only at 64MB.
What can I do to make my video card back to 128mb or where can I find the traditional bios update for this version of bios.Thanks

Intel(R) Graphics Media Accelerator Driver for Mobile Report
Report Date: 06/25/2007
Report Time[hr:mm:ss]: 10:41:16
Driver Version: 6.14.10.4833
Operating System: Windows XP* Professional, Service Pack 2 (5.1.2600)
Default Language: English
DirectX* Version: 9.0
Physical Memory: 502 MB
Minimum Graphics Memory: 8 MB
Maximum Graphics Memory: 64 MB
Graphics Memory in Use: 8 MB
Processor: x86 family 6 Model 14 Stepping 8
Processor Speed: 1862 MHZ
Vendor ID: 8086
Device ID: 27A2
Device Revision: 03
* Accelerator Information *
Accelerator in Use: Mobile Intel(R) 945 Express Chipset Family
Video BIOS: 1264
Current Graphics Mode: 1280 by 800 True Color (60 Hz)
* Devices Connected to the Graphics Accelerator *
Active Notebook Displays: 1
* Notebook *
Monitor Name:
Display Type: Digital
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: Not Available
Vertical: Not Available
Monitor Supported Modes:
1280 by 800 (60 Hz)
Display Power Management Support:
Standby Mode: Not Supported
Suspend Mode: Not Supported
Active Off Mode: Not Supported
* Other names and brands are the property of their respective owners.
I hope this is helpfull.

Satellite 1410-604 - BIOS update Incorrect BIOS update in the web?

Hi there again!
Now with a new and weird matter.
We all know that old say... "If it is not break, don't fix it". And if you put it into more informatic terms, "specially if it is a BIOS".
Yes, we all know that the BIOS is something quite dellitate to handle. For some reason we normally feel like if we were handling something like nitro-glycerine, or some radioactive product. And this is because we all know what is being put in risk in that moment: our (or sometimes others) computer, the full system could end as dead as some pieces of metal, plastic, and wires.
Well. I passed through all of that more than ten times in my life, and only once it went wrong. But since that old motherboard was already dead, It was not important. But I allways was EXTREMELY care. I allways cross checked everything before doing anything, allways got a backup and a way to restore that backup... and allways did this in COMPAQ systems, that were prepared that way. Updating a BIOS was just about preparing a disk, turn on the PC with the disk in the diskette drive, and wait. And if you didn't like the results, you simply click "return to previus BIOS" and that was it... very nice. And easy.
Few days ago, a friend brought me a Toshiba Satellite 1410-604 to solve some issues that were driving him crazy. After removing an expired Norton Internet Security, install avast and scan, I found more than one hundred files infected with a wide variety of virus, malware, trojans, and whatever you could imagine. Avast removed them all, but the remains of the operating system was so unstable that we decide to format and install from scratch.
I asked for the restoration disks, that obviously he don't have because they were lost in one of his movings. After we got the confirmation from Toshiba reps that there are no recovery disk available for this model, because it is too old, we decided to install from scratch like any other normal PC, and resigned to loose some of the utilities that come with that CDs and that are not available for download in the website.
I downloaded all of the software available for this model, including two BIOS updates. (Actually only one update, but in two versions: Windows and Traditional), and prepared a CD with all the drivers and programs just like if it were a brand new system install. And everything went very well, no problems at all. Until we got to the Wireless LAN card, but that is another issue that is already solved (the mini PCI card for the WLAN does not support WEP or WAP encription, and it is not possible to connect to any wireless LAN encripted).
At this point, and when I started configuring and enabling PCMCIA devices, and USB devices (this computer only supports USB 1.1 not 2.0) I discovered this text in the Toshiba Website:
"This Bios Update adds increased functionality to your system.
(BIOS is an acronym for Basic Input and Output System. This program is stored in a Read-Only Memory chip on the motherboard.
When the computer powers up, the BIOS is launched to perform various start-up functions.)
For detailed update information please refer to Toshiba BIOS-Update Information"
(you can find this here:
[http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU] you have to look for:
Archive
Satellite
Satellite 14xx
Satellite 1410-604
PS141E
Quite specific. Isn't it?)
According to the information in that same website, the BIOS available fits the following models:
"Satellite 2410-414, Satellite 1410, Satellite 1410-654S, Satellite 1410-814, Satellite 2410-303, Satellite 2410-304S, Satellite 1410-354, Satellite 2410-601, Satellite 1410-401, {color:#ff0000}*Satellite 1410-604*{color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410-S403, Satellite Pro 2100, Satellite 1410-S203, Satellite 2410-304, Satellite 1410-554, Satellite 1410-S102, Satellite 1410-354E, Satellite 2410-703, Satellite 1410-303, Satellite 2410-S203, Satellite 1410-801, Satellite 2410-603, Satellite 1410-902, Satellite 1410-313, Satellite 1410-802, Satellite 1410-714, Satellite 2410-354, Satellite 2410-514, Satellite 1410-614, Satellite 1410-704, Satellite 2410-515, Satellite 2410-504, Satellite 2410-702, Satellite 1410-S103"
Yes... it's there!
Now, when you go to the "Toshiba BIOS-Update Information", you get:
"FAQ Ref.: TRO0000000b07
A BIOS update is a {color:#ff0000}*relatively simple operation and can be carried out by most competent computer users*{color}. All BIOS upgrades can be obtained from "BIOS Update" Download Section click here..
Note: The BIOS files are machine specific so the correct BIOS for your machine must be used."
Please note that Toshiba does not disencourage the handling of BIOS, on the contrary: they even encourage people to do so. This is not necessary bad, but at the same time they encourage people to 'play around' with such a delicate matter, at the end of that same page, in little letters they say:
"Toshiba provides this information "as is" {color:#ff0000}*without warranty of any kind*{color}, either expressed or implied, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Toshiba shall not be responsible for the topicality, correctness, completeness or quality of the information provided. {color:#ff0000}*Toshiba is not liable for any damage caused by the use of any information provided, including information that is incomplete or incorrect*{color}."
This should trigger yellow alarms in our minds.
+"Human error is inherent to humans, and it is not possible to erradicate. It will allways appear, sooner or later" (Prof. James Reason).+
And finally I made the mistake. Even though I read that warning, I remembered all those successfull BIOS update with COMPAQ, and relied in Toshiba. That update was available there, and Toshiba was telling me that it was for this computer. Great!
So finally I unplugged all devices (USB), removed the PCMCIA (WLAN),plugged the battery charger to avoid any possible battery problem, restarted windows, and then from within windows I started the updater (windows version, as recommended by Toshiba). Everithing looked fine, nothing different of what I used to see on those old COMPAQs.
As warned by the updating program, the system was going to reboot. And actually it did so.
Windows closed quite normally (a bit quicker than normal, but without errors, and since there were no other programs than the essentials -even the antivirus was not running-), the computer switched of, all lights off (normal), and then it switched on again...
{color:#0000ff}*BEEEEEEEEEEEEP... BEEEP... BEEEEP...*{color}
OMG! I never espected something THAT bad. 3-1-1!
And now... What a 3-1-1 stands for here? Award BIOS would mean no video card or deffective video card, but it is not true, since it was working up to 20 seconds ago. It must be the BIOS.
It never came again to life. It is still beeping 3-1-1.
But now comes the investigation of the human-factors involved in this accident.
I found I commited the following failures:
*(1)* To rely in the manufacturer, even though they WROTE their information could be wrong or incomplete. (BAD if I were a QA&QC inspector).
*(2)* I didn't cross checked deeply enough (until it was already too late).
*(3)* I didn't looked previously for the way to make a backup of the BIOS, in order to restore should anything go wrong.
*(4)* Let Toshiba lead me to a path I didn't want to walk, just because of their offer of "increased functionality".
*(5)* Beleave in Toshiba when they said "relatively simple operation and can be carried out by most competent computer users"... they never said it is failproof.
Then I started the most interesting part of the investigation.
{color:#0000ff}*"What went wrong?"*{color}
Obviously, the BIOS update failed somehow, somewhere. And I wanted to know what and where.
First thing I discovered was that there are another search engine in Toshiba called "askiris" ([http://askiris.toshiba.com]) and I looked there in order to see if for any chance I could get the old 1.20 BIOS version that was installed originally in that machine.
And I found something... VERY interesting:
bq. {color:#800080}*From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.10 for Satellite 1410/1415/2410* \\ {color}{color:#800080}* bios for these models. TAIS. Downloads. DL. 105481 289838 289838 ACPI Flash BIOS version 1.10 for Satellite 1410/1415/2410. 2002-10-04. 105589...* \\ {color}{color:#800080}* Published 10/4/02* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415* \\ {color}{color:#800080}* FDD Version 1.30 TAIS. Downloads. DL. 105481 357972 357972 ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415. 2003-01-31. 105589 PUB...* \\ {color}{color:#800080}* Published 1/31/03 | Rating:* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.20 for Satellite 1410/2410* \\ {color}{color:#800080}* error message during BIOS TAIS. Downloads. DL. 105481 305240 305240 ACPI Flash BIOS version 1.20 for Satellite 1410/2410. 2002-11-01. 105589 PUB...* \\ {color}{color:#800080}* Published 11/1/02 | Rating:* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410* \\ {color}{color:#800080}* 1) Changed the content TAIS. Downloads. DL. 105481 330963 330963 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003-01-03. 105589...* \\ {color}{color:#800080}* Published 1/3/03 | Rating:* {color}
Those are: V110, V140, V120 and V130 for series 1410/15 and 2410.
GOOD! Or not?
Let's take a look:
First thing I did was download everything all four files.
Then I took the same version that made the crash: 1.40
Than I uncompressed the file, and I found:
06/05/2009 00:17 <DIR> .
06/05/2009 00:17 <DIR> ..
31/01/2003 08:38 1,605,632 11410v14.iso
31/01/2003 08:38 511,764 1370D14.EXE
{color:#ff0000}*08/01/2003 17:03 724,480 2410a9v140.exe*{color}
09/01/2003 09:32 250,663 biofca9t.com
08/10/2002 05:26 30,697 chgbiosa.exe
31/01/2003 08:36 1,087 instinfo.bat
13/05/2002 15:25 378,175 launcher.exe
31/01/2003 08:36 433 launcher.ini
06/05/2009 00:17 0 list.txt
31/01/2003 08:36 14,768 readme.com
*{color:#ff0000}31/01/2003 08:36 12,513 readme.txt{color}*
11 archivos 3,530,212 bytes
3 dirs 9,404,600,320 bytes libres
And I got my first surprise here: There is a {color:#ff0000}*README.TXT*{color} that was not present in the file I downloaded previously from the drivers repository.
So I went to the readme.txt and I found this:
"README.TXT 01-31-2003 CDC
Flash BIOS version 1.40 for Satellite 1410
This BIOS is applicable to the following models:
Satellite 1410-S105
Satellite 1410-S106
Satellite 1410-S173
Satellite 1410-S174
Satellite 1410-S175
Satellite 1410-S176
Satellite 1415-S105
Satellite 1415-S106
Satellite 1415-S115
Satellite 1415-S173
Satellite 1415-S174
Satellite 1415-S175
Satellite 1415-S176
Satellite 2410-S203
Satellite 2410-S204"
Please note that the model 1410-604 is *NOT* listed.
I thought "well, it must be another archive..."
But then I realized of a name that sounds familiar, it was there, in the directory where I uncompressed this 1.40 file, and the name is:
{color:#0000ff}*2410A9V140.EXE*{color}
So I took the other file, the BIOS_Win update, and I discovered that the file name is:
*{color:#0000ff}2410A9V140.EXE{color}* (Ups!)
So I uncompressed it again, to find:
El volumen de la unidad D no tiene etiqueta.
El n£mero de serie del volumen es: 8838-E175
Directorio de D:\Shared\diskette\2410A9v140
06/05/2009 00:43 <DIR> .
06/05/2009 00:43 <DIR> ..
*{color:#0000ff}09/01/2003 09:32 _250,663_ BIOFCA9T.COM{color}*
17/07/2002 03:38 35 biosupd2.ini
13/07/2001 13:22 6,277 chgbios2.vxd
*{color:#0000ff}08/10/2002 04:26 _30,697 _CHGBIOSA.EXE{color}*
09/11/2001 09:14 134 clean2.reg
17/07/2002 03:35 342,064 install2.exe
16/07/2002 06:55 241,664 nchgbios2.exe
18/08/2001 11:41 3,435 nchgbios2.sys
23/10/2001 18:55 11,476 nchgbios2NT.sys
26/08/2001 09:00 49,152 nchgbios2svc.exe
13/07/2001 17:05 49,152 tbdecode.dll
14/03/2002 06:42 49,152 TCHGBIOSInfo.dll
21/06/2002 11:25 1,796 tosclean2.bat
09/11/2001 12:01 967 tosclean2.pif
21/06/2002 11:34 1,841 toscleanAUTO2.bat
21/06/2002 11:44 1,796 toscleanSMS2.bat
21/06/2002 08:51 2,038 tosntclean2.bat
21/06/2002 08:51 2,084 tosntcleanAUTO2.bat
21/06/2002 08:52 2,038 tosntcleanSMS2.bat
20 archivos 1,046,461 bytes
2 dirs 9,402,793,984 bytes libres
No readme file...
Then another question arised in my mind: What about the other 1.40 file? What does the other 2410A9V140.EXE have inside?
This:
El volumen de la unidad D no tiene etiqueta.
El n£mero de serie del volumen es: 8838-E175
Directorio de D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140
06/05/2009 00:46 <DIR> .
06/05/2009 00:46 <DIR> ..
*{color:#0000ff}09/01/2003 09:32 _250,663 _BIOFCA9T.COM{color}*
17/07/2002 03:38 35 biosupd2.ini
13/07/2001 13:22 6,277 chgbios2.vxd
*{color:#0000ff}08/10/2002 04:26 _30,697 _CHGBIOSA.EXE{color}*
09/11/2001 09:14 134 clean2.reg
17/07/2002 03:35 342,064 install2.exe
16/07/2002 06:55 241,664 nchgbios2.exe
18/08/2001 11:41 3,435 nchgbios2.sys
23/10/2001 18:55 11,476 nchgbios2NT.sys
26/08/2001 09:00 49,152 nchgbios2svc.exe
13/07/2001 17:05 49,152 tbdecode.dll
14/03/2002 06:42 49,152 TCHGBIOSInfo.dll
21/06/2002 11:25 1,796 tosclean2.bat
09/11/2001 12:01 967 tosclean2.pif
21/06/2002 11:34 1,841 toscleanAUTO2.bat
21/06/2002 11:44 1,796 toscleanSMS2.bat
21/06/2002 08:51 2,038 tosntclean2.bat
21/06/2002 08:51 2,084 tosntcleanAUTO2.bat
21/06/2002 08:52 2,038 tosntcleanSMS2.bat
20 archivos 1,046,461 bytes
2 dirs 9,402,781,696 bytes libres
*{color:#ff0000}They both have 20 files, and 1,046,461 bytes. I asumed they are both the SAME file{color}*.
And the readme file does not list the model 1410-604 in its readme file, therefore I cannot explain this except as a mistake from Toshiba. *{color:#ff0000}They put an incorrect BIOS in their website, and suggested the update, and somehow leaded to this kind of errors.{color}*
(Except in the case that one of those models is a different name of the 1410-604 model, and if it is the case... now I don't know why this BIOS do not work with this computer).
The worst part is that neither of those other files (V1.10, 1.20 and 1.30) lists the 1410-604, therefore there seems no possible workaround for this problem. I need an original v1.20 for this CMOS, and Toshiba seems not to have it. They offered me to solve the problem, by leaving the notebook at an ASP, and paying only 95€ for the work and about 280€ for a motherboard replacement, I will get it solved. But they offer no warranty of their possibilities because is a model 'too old' and 'discontinued' and with 'no support'...
In other words, they said "don't bother with this, just go out there and buy a new one" (something absolutely out of my scope in this crisis-time) :P
Thank you for reading soooo far.
Now what I need is to get any ideas of a workaround for this, my ideas are:
(1) This CMOS has a boot-part that still works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn into the CMOS, from the VERY SAME model (a BIOS backup) but the backup must be adequate for the burning program (CHGBIOSA.COM).
(2) It is still possible that the BIOS could be OK but the data on the CMOS got somehow corrupted. If so, clearing the CMOS could solve de problem. But I was not able to find a clear cmos button from outside, and after disasembling I took of the battery, with no good results. I have to try leaving the MOBO without battery for longer period (I left it about 20 seconds) just in case 20 seconds don't allow all the capacitors to fully go to zero values. I have not much hope in this point.
(3) Try to get a REAL good update from Toshiba. I contacted several times technical support, and I was able to verify they are only phone-operators, with a script in front of them, and when the problem goes-out-of-scope they fall always in the same answer: "you have to go to an ASP". I still have a low hope to find someone who really knows a bit, and could enlighten with a good BIOS to put in this disks.
(4) As far as I could find, this BIOS is not from any known BIOS-maker. It seems it has been developed by Toshiba (own brand), therefore the Crisis Recovery Disk from Phoenix will not be of any help here. As well as any other BIOS recovery tool not designed for Toshiba's BIOS. But I'm open to any ideas, that could be tested more or less safely. (Remember that the 'BIOS-BOOT-PART' feature is still working, I don't want to loose this only possibility of redemption).
Wwwaaaaoooowww... what a long-post falks! Sorry for that!
Forgive me, but I wanted to be really clear.
Should anyone give some hints or advice, will be greatly appreciated.
Please don't say what I shouldn't do... I already know that. I already researched and already found my mistakes, in order not to repeat them. Now I need to move on, to advance, and to try to solve this, or at least learn how to solve similar things. As much as possible.
Thank you again, in advance, and sorry again.
FenixDigital
Message was edited by: Fenix_D
Changed subject to beter reflect what is the matter about (apparently erroneous BIOS file in Toshiba download center).

Well. 
 
It's not dead, certainly. 
 
The steps that I put in my procedure were: 
 
--> There are two memory sims, that I am going to identify as M1 and M2 
--> There are two memory banks, that I am going to identify as A and B 
 
Next step in order to identify if there are some module or bank that is not working properly are: 
 
The modules were installed as: 
 
M1 --> A 
M2 --> B 
 
1--> Boot without any memory chip. 
 
<blockquote>
A--> X 
B--> X 
</blockquote>
 
2--> Boot with ONE module 
 
<blockquote>
A-->M1 
B-->X 
</blockquote>
 
3--> Boot with the OTHER module 
 
<blockquote>
A--> X 
B--> M2 
</blockquote>
 
4--> Boot with BOTH modules swapped: 
 
<blockquote>
A--> M2 
B--> M1 
</blockquote>
 
5--> Boot with ONE module swapped: 
 
<blockquote>
A--> M2 
B--> X 
</blockquote>
 
6--> Boot with the OTHER module swapped: 
 
<blockquote>
A--> X 
B--> M1 
</blockquote>
 
At this point I got a great difference. It booted, finally. But in order to make a diagnostic, I have to complete the full test, and the results were: 
 
1--> Boot without any memory chip. 
 
A--> X 
B--> X 
 
NOT BOOTING Actually the computer not even tries to read the disk. Only the power led turns on, but even prior to press the 'on/off' button. I think this indicates 'no memory installed'. I would have expected a post failure beeps, but there were no beeps at all. 
 
2--> Boot with ONE module 
 
A-->M1 
B-->X 
 
BOOTED NORMALLY Well. This obviously means that the 3-1-1 beep code means memory error, or one bank failing of two installed. Now I didn't know if the problem was the module, or the bank B. 
 
3--> Boot with the OTHER module 
 
A--> X 
B--> M2 
 
NOT BOOTING Just like the condition in 1. Like no memory installed, therefore there are two possibilities: The bank B is not working, or the memory module M2 is not working. 
 
4--> Boot with BOTH modules swapped: 
 
A--> M2 
B--> M1 
 
NOT BOOTING Just like previous to test condition. Beep code 3-1-1, no boot at all. 
 
5--> Boot with ONE module swapped: 
 
A--> M2 
B--> X 
 
NOT BOOTING This was the important test, because it finally let me determine that the problem is at the module 2 (M2) not at the bank B. But still there could be a failure IN THE BANK B and IN THE MEMORY MODULE 2. Have to do the other test. 
 
6--> Boot with the OTHER module swapped: 
 
A--> X 
B--> M1 
 
BOOTING NORMALLY This really confirmed there is nothing wrong with ANY bank, but one of the modules is not working, actually is not being even detected. This is quite weird, because this computer was working perfectly with those two modules, and in the moment of the BIOS upgrade it seems to fail... How come? 
 
Something weird happened here. I don't know what, but something ruined one memory module (fortunately only one), what I would like to know now is what happened. But at least I have the machine running, with very low memory, but running. 
 
What I am thinking now is what about this BIOS upgrade makes the motherboard not to recognize one of the modules for some reason? 
 
<img class="jive-emoticon" src="images/emoticons/happy.gif" border="0" alt=":)" /> 
 
I will continue my research, but certainly the memory made the difference. 
 
I am not sure why I didn't discover this before, I think I didn't perform this test before, for two reasons: 
 
(1) I tried to boot with no memory, and this was impossible, so I assumed that the problem was not at the memory. 
 
(2) When I heard the beep code (3-1-1), somewhere I read it was a video problem, and I asume most probably it was a video problem (since no video at all was being displayed) but I should have take into consideration that Phoenix BIOS also means with the same 3-1-1 a DMA problem (memory problem). 
 
Okis... It's a pitty having to wait so much between a post and it's approval. I posted my answer two days ago, and since it didn't appear, I believe It didn't upload, so I replied again, and also didn't appeared... until now. It is obvious that a moderator approval is required. That's why I have to wait 24 hours or more to read my post. This slows this forum effectiveness. 
 
Thank you very much for your help. I'll keep you informed. Until we get to a final diagnosis and solution.

Dell Venue 11 Pro (5130 64Bit) BIOS update in WinPE 5.1 x64

I have encountered an issue while trying to upgrade BIOS on Dell Venue 11 Pro (5130 64Bit) in WinPE 5.1 (64-bit). To pre-empt any questions why not use BIOS update option available from boot menu: while it may be quite elegant solution for home use, it doesn't fit well in production environment where the action needs to be repeated hundreds of times, custom audit trail required and some other (automated) post-upgrade tasks need to happen.
After running the executable I receive the following error message:
The subsystem needed to support the image type is not present.
This would point to 32/64 bit application incompatibility and/or limitations of WinPE itself. I have following packages present in my image, as well as CCTK HAPI installed:
Feature Name
SMB1Protocol
WinPE-HTA
WinPE-WMI
WinPE-NetFx
Microsoft-Windows-NetFx-Shared-Package-WinPE
WinPE-PowerShell
WinPE-DismCmdlets
WinPE-SecureBootCmdlets
WinPE-SecureStartup
WinPE-TPM
WinPE-Scripting
WinPE-WDS-Tools
WinPE-EnhancedStorage
Unfortunately I cannot run the update from a "proper" copy of Windows as we need to upgrade BIOS for one of our customers without installing OS (we are shipping devices with default Dell preloaded version of Windows). The way I see it, before I am forced to go down the route of upgrading BIOS from boot menu, I have two options:
- Get a grip of what the exact issue is in x64 PE. Would anyone be able to help out here? Is this something I can fix by adding any components to my PE image?
- Try running update in x86 PE (I believe the executable is 32-bit despite "64bit" string in the name). Currently I can only boot using x64 image as BIOS is set to UEFI mode. I am reluctant to change boot mode to Legacy just to give it a go. Will I be able to safely go back to UEFI without any additional recovery work? I am not intending to change the contents of the HDD. Also will cctk be able to change boot mode back to UEFI automatically, or will I have to implement it as a manual step at the end of the process?
Due to other restrictions and time scales involved Windows To Go is not an option as well. Any help with this will be much appreciated.

The issue is that the subsystem required to support 32bit apps does not exist in the WinPE 64bit, and there is no way to add it. You'll either have to use WinPE 32bit, or update your BIOS after the OS has been installed. Other manufacturers provide x64 BIOS update executables, so I don't know why Dell can't get their act together and do the same.

HP Envy 6 - Boot Loop following Bios Update

Hi All,
Having spent the better half of tonight trying to resolve an issue whereby my HP Envy 6 1232SA was stuck in a loop after what I thought was a failed bios update.
I received a message saying an UPDATE for my bios was available. I installed the update using the SP available from the download site. The laptop started the reboot process, powered down and wouldn't come back up. I was getting the dreaded BLACK SCREEN that everyone is talking about.
I did all the ususal things that people here were advising. That being trying to load into zombie mode via the WINBUTTON + B, loading a recovery bios onto a bootable flash drive, using the HP UEFI TOOLS and such. None of this was working. It was clear that the laptop sounded as though it was constantly rebooting. You could hear the CD make a whirring noise for a second, stop, and retry.
When using the WINBUTTON + B I was getting a single flashing light on the caps lock screen. I had been informed that this meant that there was a CPU problem and that the machine would need to be sent back for repair.
I am a Desktop support technician with 20 years of experience. This would have been the first time I had heard of a bios update damaging the CPU.
I did a little more digging such as removing battery and cmos battery and trying to get laptop to power, this was also not working. What I tried next resolved the problem for me.....
I had installed a SSD into the machine. I removed the SSD and tried booting the machine with no HDD in the drive, the machine immediately powered on and completed the flash process. After the flash process the machine complained of no HDD (as I hadn't yet reinstalled it). After it was reinstalled, the PC booted fine into windows.
So to those who are having the Black Screen issue after a bios update, you could possibly try removing your HDD and booting the laptop with no HDD to see if that forces the flash to finish.
I have absolutely no idea why a bios update wouldn't work due to an SSD being in the drive, but meh..... This fixed the issue for me.
Hopefully this will help someone out.

@Alijc2014 ,
Hello and thank you for posting on the HP support forum. Here is a link to the HP blink and beep codes.
HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
Check this link and take a look at what your blink code is stating.
You may want to check this out as well.
BIOS Beep Codes
HP PC Hardware Diagnostics
Testing a Hard Disk from the BIOS
Let me know what you come up with.
Now if it comes down to a hardware issue you will have to deal with the country of purchase for repair options. If it was bought in the UK you will have to send it through to the UK repair system you will not be able to do this in the US.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

HP Pavilion p7-1221 Desktop PC only boots with 1 ram stick in after bios update

Hello, I updated my BIOS because it was suggested by HP support. My PC did not want to start afer that. I did some reasearch and tried several things, like unplugging the power supply and taking out the CMOS battery. I even referenced the beeping codes. I narrowed it down to memory problems, "I think". I took on out the sticks and made sure they were okay, placed them back and it booted. The I shut it down and it would not boot again. I took out one stick and it booted. It's been several weeks now and I have to take out 1 stick and boot, turn power off and add the other stick and it boots. What could be the problem? I read it might be that the setting in the BIOS might be different somehow. Perhaps HP overclocked my RAM or voltages issues. I don't know. Can anyone help me please? I'm not too computer literate so I would need someone to walk me through changing the settings in BIOS.

Hi,
These are the bios settings for your PC. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03383166&lc=en&product=5272748&tmp...
You might try disabling Secure boot and then reboot a few times to make sure that everything is OK. Then enable Secure Boot again.
There is a chance that the bios update has a problem. Try reflashing the BIOS or contacting HP Support.
HP's support number is 800-474-6836 or 800-HPINVENT or online here.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Bios Update....what is it?

Similar Messages

Maybe you are looking for