BIOS V1.6 Overclocking help pls!

Hi guys
I have a 875P Neo-FIS2R and since I upgraded my bios to V1.6 I have found the FSB of my P4 has been overclocked to 203Mhz from the standard 200Mhz. :(
I have also found that my graphics card has been overclocked. (A Geforce4 ti 4400 and the core is overclocked close to a Geforce4 ti 4600).
I can fix the FSB with core cell back to 200Mhz but this only lasts until the next restart. I have not found a way to fix the GPU ocing.
Btw I set the bios voltage of the AGP at 1.55V but on core cell it is always set to 1.6V when I reboot.
Has anyone else experienced this problem and does anyone know how to fix this problem or do we have to wait till the next bios is out (V1.7?)
Thanks for you help. :D

Hi ppl )
I no this is an old post but I know a few of us still have the problem of our GCs overclocked as well as our FSBs overclocked to 203Mhz by the new bios V1.6.
I have since e-mailed MSI technical support with this letter:
"Hello
I have recently purchased a 3Ghz 800Mhz FSB Pentium 4 and a MSI Neo2-FIS2R 875P motherboard. I noticed that when using core cell the FSB was automatically overclocked to 203MHz each time I loaded up. As I do not wish to overclock at the moment I turned the FSB down using the "-" button then pressed OK and then saved. Core cell would then read the correct 3Ghz (no overclocking).
However I found the P4 overclocked again after I restarted the next time. So I did the exact same with corecell and lowered the FSB to 200Mhz exactly so that it wasnt overclocked. I was sure I saved this setting with corecell and then I uninstalled core cell so it could no longer change this FSB setting.
However when I rebooted and checked the speed with the "Intel frequency ID Utility" the FSB was said to be 811Mhz so it was in fact 203Mhz again. I checked the CPU BUS CLOCK in the bios and it is set to 200Mhz. I then tried the default setting of 201Mhz with corecell with the same result after rebooting.
So basically how can I prevent this overclocking happening automatically. I have a MSI Neo2-FIS2R with a 875P chipset and bios version 1.6? I dont want to overclock because I want to keep the Intel P4 warrenty.
Another question: Does that MAT function that is available in V1.6 affect the Processor at all or only the RAM and will it void the warrenty of the P4 if run? It is currently set to SLOW."
soz for the long read but had to get everything in.
Now for the interesting part 8)
THIS IS MSI TECH SUPPORTS REPLY!!!!!:
"Dear Sir/Madam,
Thank you for contacting MSI Technical Support.
There will be tolerance difference when the softwares detect the clock.
It's normal. It won't cause reliability nor stability problem.
Please feel free to let us know if you still have any further problem.
Best regards,
MSI Technical Support"
8o 8o 8o
Is anyone else shocked 8o by this response because MSI seems to be overclocking "cheating" and are happy to say that is only a tolerance in the clock meanwhile so many other users have experienced this as well so it definately isnt a tolerance difference.
Thanks would like your views on the matter
SAspaz

Similar Messages

Bios update? overclock help?

hey guys! i need some help with and if its posible to overclock my intel CPU and card.First some system info: Windows 8.1 64Bitsintel Core i7- 3632QM 2,2 Ghz(gets to 3,2Ghz in turbo boost)8GB DDR3 memory 789Ghz3GB SDHC Readyboost CardHP 1842 U3E1 Motherboard2 GB intel HD grafics 4000 650Ghz Core speed 800Ghz memory speed1GB ATI AMD Radeon HD 7600M Core speed 830Ghz 1010Ghz Memory speed698GB hitach Harddisk(gona be replaced by an ssd)Bios insyde F.14 20-09-2012Extended Batterypack 83981 Mwh7,9 A AdapterALL drivers are up to date(except Bios)not a bad cooling system for a laptop. removed the dust gueards for more airflow.cleanded it out, and its standing on a platform with 5 fans. i have already overclocked one of the grafics cards.this is the AMD Radeon 7600m series core speed was 600Ghz memory 900Ghz.ist now set at 830Ghz and 1010Ghz its can go a lot higher but the grafics card crashes, i know it is a unstable overclock if it chrases but can i somehow get the clocks higher without crashing the drivers? so my questions are: -can i update my bios and how(never did this before)-can i increase the processor speed? i can increase the voltage going to the turbo boost mode with intel extreme tuning utility-can i overclock the intel grafic card?-how do i stop amd grafic card chraches? core speed goes all the way up to 900Ghz only thing is the card driver crashes. but no wreid things are displeyed on the screen.-can i increase the voltage to the cards?-can i increase the ram Ghz thanks for the time already and i hope u guys can help me!

Quote from: steffen.agermann1989 on 23-January-15, 08:40:53
Hi soo i have a GT702 PE gtx880m and a 4810mq an currently im stuck on bios 50v and i want to update to 717 but i tried everything and its not working either way
i can flash from 50v to 517 that goes but i cant go any further if i try the laptop only turns on and off alot then boot back into windows logon screen
what am i doing wrong?? hope anyone got a clue i have plans for updating to the latest gtx980m and i realy need that bios update fast :/
If i can get a update order or an explanation how to do it it woud be awesome
man dont do anything with that 717 because your system non raid.am i right?

I7 920 American Megatrends Bios XPS 730x OVERCLOCK HELP please

I am a first time overclocker, I have spent countless hours online reading about how to do it, still cant find American Megatrends Bios as an example. Can anyone help me to overclock my system to a safe stable speed 3.6 or 3.8 maybe?
Any help here is appreciated, respectfully Offsmack
I have an XPS 730x
i7 920 266 ghz
vista home premium
memory 6gb 1066 MHZ DDR3 3DIMM
hard drive 640gb
video crossfire ATI Radeon 4800 x2
not sure of my motherboard Dell 'thought' it was Tylersburg ATX ?
my email is [email protected]
Brian Leupold www.leupold.com we make SCOPES!

Hi offsmack. As the forum is for users of MSI products, I don't see any specific MSI hardware in your post. The moderators will probably lock this thread.

MOVED: BIOS Overclocking, help please!

This topic has been moved to Overclockers & Modding Corner.
BIOS Overclocking, help please!

Quote from: MurdoK on 13-January-06, 17:23:55
Hello !!
Please tell us which Motherboard you are talking about ?
Greetz MurdoK
I'm an idiot!!! I forgot to post which mobo I'm using!!! jajajajaja
I'm using an MSI K8N NEO4 PLATINUM
Greets!

How to create matrix template help pls

hi frs,
i have generated xml file after creating matrix report in report builder.
i want to know how to create matrix template(rtf) in word document.
if i use wizard or insert> all fields i am not getting rtf like matrix.
help pls
Thanks
Rajesh

This issue is really becoming a problem for us. Does anyone have any examples of label templates. The label when generated automatically converts from pontrait to landscape. If you increase the size of the template then word complains about the page and margin size before printing.
Anyone have any ideas?
Thanks

My ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

Might want to post your question in the correct forum. This is the iPHONE forum.

I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!

Dee002 wrote:
MacBook's only have 2.0 USB ports.
Wrong.
If you're not going to provide correct advice then don't repsond at all.
http://www.apple.com/macbook-pro/specs-retina/

I made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls

i made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls
Re: can i install windows for pc on my mac or do i need the windows for mac?

There is no Lion DVD. Start Boot Camp Assistant and select the menu item to download the Windows Support Software.
Read and follow the Boot Camp Installation Guide. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

Dear Ones,
I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

see if this is helpful : [http://support.mozilla.org/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

"Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

"Adobe Illustrator cs5 quit unexpectedly" error message.
After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
Help pls.
Thank you.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

Here's a link to the QuickTime for Leopard 7.7 installer:
http://support.apple.com/kb/DL761

Upgraded pc to ios7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls?

Upgraded pc to ios 7 but when syncing to iphone 4 it crashed. Phone is now in recovery mode but it nearly finishes recovery then stops with error 3014. Phone rendered useless until this is fixed. Help pls? I have tried many of the suggestions for the error code given. Im getting frustrated. I'm not a techno so would appreciate simple terms or ways of explanation. Thx!!

I have the exact same issue right now!

Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M.

Can't send emails. Can you help pls? Thanks.

Hi, my Mac Book Pro won't let me send emails. It says: Outgoing mail server (SMTP): Gmail Offline. Can you help pls? Thanks.

Help. I have the same problem. I can receive email but can not send email from my MacBook Pro running OS X 10.9.4.
I have been reading posts about this issue until my eyes are rectangular.
I have tried the following:
1. Removing the passwords from the keychain.
2. Trying the various ports (default set, custom 25 alone, custom 465 alone, custom 587 alone)
3. Unticking the Use SSL box. Interesting note, it sometimes self-ticks this box.
4. Supplying full email name in the userid box. Interesting note, it sometimes self-corrects to just the plain userid prefix.
5. Running repair disk permissions
6. Turning offline all mailbox accounts and then turning then back online.
7. Rebooting numerous times
8. Force Quit of Mail and numerous normal quits and restarts.
9. All software updates have been installed.
10. I may have forgotten some of the more bizarre things I have tried but I have not got to the point of deleting the entire account (and all of its 3 years of emails).
I have a sister MacBook Pro (same operating system, larger screen, same ISP, same email provider, same power source, etc.) sitting right next to this one and it is working fine - mail comes in and mail goes out. It is on the same network and I have dutifully copied all of the parameters and this still does not solve the issue. Surely, there is more witchcraft out there that I can try? New to this "posting" process. Not even sure how to get back to see if anyone has any further suggestions. Thanks to all those who have tried to provide suggestions. Much appreciated but I am still stuck with webmail! Arghhhh. Ron

Error 4251 help pls....

i try to burn cd and all i get is error 4251 i have tried to reduced the speed but still i keep getting this error message any help pls from anyone....

Same thing has been happening to me. Hope someone can help!
I burned one CD (there was an error message after burning) and it doesn't play properly. Subsequent attempts to burn the same playlist - and I tried a different playlist too, just in case it was that particular album - result in the error message mentioned in the above posting. It starts to burn, then ejects the cd with the message "error 4251", even when I select a slower write speed. Diagnostics show no problem, but it seems to test only for reading, not writing. Here's the diagnostic message I got:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 1 (Build 6001)
TOSHIBA Satellite E105
iTunes 9.0.2.25
QuickTime 7.6.4
FairPlay 1.5.23
Apple Application Support 1.0.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number CBFABDA2556C6D0C
Current user is not an administrator.
The current local date and time is 2010-04-13 11:00:49.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
D: MATSHITA DVD-RAM UJ862ES, Rev 1.90
Audio CD in drive.
Found 16 songs on CD, playing time 71:31 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:44:53
Track 3, start time 10:03:39
Track 4, start time 14:58:64
Track 5, start time 18:14:34
Track 6, start time 22:28:43
Track 7, start time 26:49:15
Track 8, start time 31:10:28
Track 9, start time 35:54:08
Track 10, start time 40:10:03
Track 11, start time 45:14:58
Track 12, start time 49:45:24
Track 13, start time 53:44:07
Track 14, start time 58:27:16
Track 15, start time 62:43:45
Track 16, start time 66:39:60
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive D: MATSHITA DVD-RAM UJ862ES on CDR media at speed 8X.

BIOS V1.6 Overclocking help pls!

Similar Messages

Maybe you are looking for