BIOS Versions for MSI 7125

I have found that my MSI K8N Neo4 Platinum (7125) BIOS seem to be missing some features like DMA settings, whether to cache the BIOS or not, etc.  I found some new beta BIOS at "http://www.techpowerup.com/articles/other/111", but I would like to know what they do before I flash them. 
There are two versions, the Beta 1.21 released on the 18th of January and the more recent 1.24 released on the 18th of February.  Does anyone know what these BIOS do?

I am guessing, that you meant I should put this in the BIOS forum?  Or if you had anything else in mind...Please say so!
BTW, mods please move this to the BIOS thread, if that would be more appropriate.

Similar Messages

  • REQUEST: Latest BIOS update for MSI GTX 970 Gaming 4G card

    Hi, I'd like the latest BIOS version for my MSI GTX 970 Gaming 4G card. I don't know what the serial number is, I don't have the box anymore. I've attached my BIOS file I saved through GPU-z. Thanks in advance! 

    Quote from: Nichrome on 07-May-15, 04:01:10
    Hi
    Check graphics card itself, should have a sticker with S/N. Else it might be hard (or impossible) to provide correct vBIOS.
    Thanks!   S/N: 602-V316-09SB1410116XXX

  • BIOS chip for MSI H67MA-E35 (B3)

    Is it possible to get a BIOS chip for this motherboard?
    I've got this motherboard from a friend. He wanted to flash the BIOS but it failed. The board was fine before the flash but now it can't do anything anymore. It's just the BIOS that's bad.
    The chip seems to be relatively easy to remove. I would like to solder on a new one. 
    Someone who can help me out? Thanks!!!

    Its probably just a bricked board. I suggest you phone your local PC shops and find out which one has a ISP programmer. That way they can flash the latest, or any BIOS version for that matter, onto the current BIOS chip, ensuite.  Here is an example of such a programmer http://www.xeltek.com/In-System-Programmers/SuperPro-IS01/
    Fry's Electronics in the US seems to be quite helpful from what I understand. That is of course if you are from the US.
    You can download the latest BIOS from the MSI site and take that along on a USB flash drive, and they will be able to flash it for you, at a fee of course, normally.
    Else you can search the web for companies that specialise in sending you ready flashed BIOS chips, which will of course cost money as well and means you have to solder it onto the board.
    Alternatively you can send the board to a MSI technical centre and they will also do the job.
    You will have to weigh up the costs and time effort and decide.

  • Which is the latest BIOS version for Satellite L30-113 (PSL 33)?

    Hi everyone,
    Could someone please tell me which is the letest BIOS version for my laptop since I have never upgarde it?
    Also how do I install it and how do I check what is my bios version now?
    Thank you in advance

    First of all the BIOS update is not necessary if your notebook functions correctly.
    But back to your questions;
    On the Toshiba European driver page you will find all available drivers and also the newest available BIOS. At this time it seems to be a 3.10-WIN version
    How to find out the BIOS version?
    This is very easy you have to access the BIOS and then you could see the BIOS version.
    To access the BIOS you have to press the F2 button immediately after notebook was started.
    Ciao

  • Where can I find an old BIOS version for X200

    Hi,
    I am running windows 7 build 7100 on an x200. After updating to BIOS Version 3.05 - 3.06 the system is significant slower. Where can I find the former BIOS version for download?
    In advance thx a lot for support.

    Hi wolfgang285, and welcome to the Lenovo User Community!
    All the BIOS versions which have been released on the web are on the X200 BIOS update page.
    I don't work for Lenovo. I'm a crazy volunteer!

  • MOVED: Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

    This topic has been moved to AMD64 nVidia Based board.
    Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

    If you want SSE3 support and you do not overclock, Bios 1.4 is the only one officially available (1.41beta is not official).
    Try to upgrade to 1.4 and see it for yourself, do the upgrade with floppy in DOS so that you can save your old Bios.
    I would rather wait till mid June when a less troublesome new bios is suppose to be availabe for NEO4 MBs.

  • "Legacy Mode" BIOS request for MSI R9 280X GAMING 6G

    "Legacy Mode" BIOS request for MSI R9 280X GAMING 6G
    S/N: 602-V277-310B1407096530
    Installed BIOS: TV277MS.3A0
    Hi,
    I have the annoying problem with my new video card: a screen is periodically blinking in 2D. Probably that problem already solved in a newest BIOS?
    I have to use "Legacy" mode because of my PC does not start otherwise.
    Related hardware: MB: MSI P67A-GD65 B3 (BIOS 1.19), CPU: i7-2600K, Monitor: HP ZR2440w (DP connection).
    Thank you.

    here is .3A1
    TV277MS.3A1 legacy
    TV277MH.3A1 uefi
    flash guide:
    Quote
    Decompress the attached .rar archive with Winrar: http://www.rarlab.com/download.htm
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (xxx.rar) and put the included file (TVxxxxx.zzz) on that stick.
    Rename TVxxxxx.zzz to zzz.rom.
    Put the atiflash.exe from: https://www.techpowerup.com/downloads/2306/atiflash-4-17/
    on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 zzz.rom [ENTER] and let it flash the vbios.

  • [REQUEST] GOP/UEFI BIOS Update for MSI GTX 760 HAWK

    Hello,
    I'd like to request a GOP/UEFI bios update for MSI GTX 760 HAWK 2GB
    SN: 602-V300-01SB1307104617
    https: //drive.google.com/file/d/0B1-fBAUWkbq0MjAzbWM3Z3laUk0/view?usp=sharing
    Thanks!

    Quote from: livanu.razvan on 18-December-14, 05:21:18
    Is there a tutorial on how to flash the new BIOS?
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the desired file included with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.
    Quote from: livanu.razvan on 18-December-14, 05:21:18
    Also, what is the difference between normal and ln2, or witch one is safe to use?
    normal is the pre-overclocked default vbios. LN2 (which can be chosen via the selector switch on top of your card) is not factory overclocked but allows more extreme manual oc without the limits of normal vbios (more voltage and power draw allowed). This is especially needed for extreme oc like if using Liquid nitrogen (LN2) cooling for oc records.

  • BIOS update for MSI P45D3 Platinum 64bit

    Can't find BIOS update for MSI P45D3 Platinum that support my 64bit xp.
    Is it possible to find?
    - Kristoffer

     What exactly is your problem? You should not need BIOS update for an OS install. >> Posting Guide <<  >> Drivers <<
     Don't update BIOS unless absolutely needed for some other problem.

  • UEFI Bios Request for MSI Twin Frozr III HD 7950 O/C Non Boost card, has 7970pcb

    Its this one       Version:    015.020.000.000.001083    You make this forum far to complicated to navigate for old people  , could not figure out how to insert an image, and you can't post external links either. So i linked the bios version, great cards by the way i have two of them, purchased a new motherboard that supports UEFI so I wanted to try. Thanks. More info:
    GPU Device Id: 0x1002 0x679A
    113-C3861300-X01 113-MSITV277MS.202 TAHITI B0 PROH C38613 GDDR5
    3GB 500E/150M
     (C) 1988-2010, Advanced Micro Devices, Inc.
     ATOMBIOSBK-AMD VER015.020.000.000.001083
    C3861300.101 PowerTune Limit: 175 to 260
     CCC Overdrive Limits
    GPU Clock: 1100.00 MHz
    Memory Clock: 1575.00 MHz
     Clock State 0 Core Clk: 880.00 MHz
    Memory Clk: 1250.00 MHz
    Flags: Boot Clock State 1
     Core Clk: 880.00 MHz
    Memory Clk: 1250.00 MHz
     Flags: Optimal Perf Clock State 2
     Core Clk: 880.00 MHz
    Memory Clk: 1250.00 MHz
    Flags: UVD Clock State 3
    Core Clk: 300.00 MHz
    Memory Clk: 150.00 MHz Flags:

    S/n : 602-v277-05sb1205073711   first card      S/n 602-v277-05sb1206017147  for Msi Twin Frozr III Hd 7950 o/c regarding UEFI bios request.

  • Can't change BIOS version in MSI GS70

    Hello Folks! I'm completely new in the Forum. This will be my very first post so apologies for any mistakes I can make 
    Two weeks ago I bought a MSI GS70 2OD-052XPL  (1TB 7200 hdd version) laptop. Before I've become a happy owner of my MSI I did some additional purchase (2x mSata 120Gb). I was planning to set my mSata ssd as  SuperRAID array and make a clean Windows 8 installation. However It turned out that to do so I have to have the UEFI RAID0 SKU BIOS version (I have nonRAID version) on board. I downloaded proper BIOS version and I've tried to change my BIOS to the right one (w8_E1771IMS.70E). No success so far . I contacted my polish MSI techsupport and they said the there should be no problem with the installation. I tried different methods of BIOS flashing but there i ROMID error at the end. I'll be more than happy to have your support guys.
    Thanks,
    Tomasz

    Quote from: darkhawk on 17-January-14, 10:10:01
    'SuperRaid' is sort of a marketing name that MSI uses for being able to put multiple mSATA SSD's into a notebook. ALL notebooks use the Intel RAID ROM/controller built into the NB in order to make the actual Raid array.
    As Svet explained, every GS70 does come with 'SuperRaid' support. The GT70 (like I have), it was an option to get a SuperRaid.
    The speed of the raid is dependent on the controller on the SSD and the how the SSD is configured (by the manufacturer.....how the FLASH is arranged, etc...).
    On top of that, in Raid 0, you should see performance that is roughly 2x that of a single drive.
    http://www.legitreviews.com/kingston-ms200-120gb-msata-ssd-review_125006/3
    Looking at that review, you can see that their single drive is similar to the performance of a single drive that you have (should be, it's the same model....). And your Raid 0 performance is very close to being 2x that of a single drive.
    Overall, everything looks to be in working order.
    Thank you guys for the complex explanation. Now I know a lot more about drives and how it works! 
    Special thanks for Svet!

  • Bios update for MSI GF4 Ti4200-TD64 out now!

    Hi.Well on Liveupdate there is out MS 8870 BIOS,and there is 3 BIOS:
    Ver100
    Ver110
    Ver120
    Here is the link:http://tw.msi.com.tw/autobios/SVga/Bios/Ms8870/
    Anyone knows whats been fixed in this BIOS versions?

    Hi there,
    I got this message from MSI:
    Quote
    We may release different version of BIOS for the same
    model but different options.
    For example above,
    MS-8870 BIOS version 1.00 is for MS-8870 64MB
    MS-8870 BIOS version 1.10 is for MS-8870 128MB
    MS-8870 BIOS verison 1.20 is for MS-8870 64MB (a
    different memory type)
    A wrong version may case the system never boot
    again!!!
    Be very carefull what you download!

  • BIOS Settings for MSI p45 platinum q6700 with 8 gigs of viper

    hi all ,does any here have any stable settings? i want to change settings in the bios ,tried the duel core DOT and its not much good ,i have windows 7 x64 build 7600,and a T1 thermaltake heatsink , i get it up to around 3.2ghz with the DOT ,stills stays cool only around 19c to 21c even under load,but when i start ruunig some games it freezes up ,i have 2x4870 ati cards 512ddr4 in crossfire ,they pass all the tests with flying colors ,but i know this is capable of much more, oh,, sorry i forgot ,, my bios version is the newest one, whatever that maybe .i dont feel like leaving windows right now , but i just updated last week.right from msi.com website.
    thanks
    joe

    Hardware Monitoring :   Fintek F71882FG
    Real Frequency :2673.26 MHz
    Multiplier :10x Low/High Multiplier :6x / 10x
    Bus Speed :267.3 MHz FSB Frequency :1069.3 MHz (QDR)
    Core #1 :2673.82 MHz
    Core #2 :2673.56 MHz
    Core #3 :2673.43 MHz
    Core #4 :2673.57 MHz   
    CPU Voltage :   1.301 V MaxVID :1.301 V MinVID :1.301 V
    Voltage CPU :   1.27 V
    +3.3V Voltage :   3.34 V
    +5V Voltage :   5.76 V
    +12V Voltage :   2.20 V
    SB :   3.34 V
    VBAT :   3.28 V
    VIN2 :   3.58 V
    VIN3 :   0.95 V
    VIN6 :   0.34 V
    Processor Temperature :   22 °C
    Mainboard Temperature :   30 °C
    Processor :   Thermal Diode
    Intel Core 2 Quad (Core 1) :   37 °C
    Intel Core 2 Quad (Core 2) :   37 °C
    Intel Core 2 Quad (Core 3) :   34 °C
    Intel Core 2 Quad (Core 4) :   36 °C
    GPU 1 Temperature :   52 °C
    GPU 2 Temperature :   50 °C
    Hard Disk ST3250410AS         :   34 °C
    Mainboard :   MICRO-STAR INTERNATIONAL CO.,LTD MS-7512
    Manufacturer :   American Megatrends Inc. Version :   V1.0
    Date :   05/21/2008  (mm/dd/yyyy)
    Address :0x0 on 4096 KB
    Copyright :(C)2006 American Megatrends, Inc
    Motherboard ID :66-0100-009999-00101111-052108-Eaglelake-A7512200
    DMI Version :2.5
    Supported Voltage :1.3V
    Physical Memory :8192 MB DDR2-SDRAM
    DIMM1 (RAS 0, RAS 1) :   2048 (Double Bank) 
    DIMM2 (RAS 2, RAS 3) :   2048 (Double Bank)
    DIMM3 (RAS 4, RAS 5) :   2048 (Double Bank
    DIMM4 (RAS 6, RAS 7) :   2048 (Double Bank)
    ALL 4 DIMMS ARE CURRENTLY AS FOLLOWS
    Manufacturer :   PDP Systems
    Part Number :   6400LL Series
    Serial Number :   Unspecified
    Type :   DDR2-SDRAM PC2-6400 (399 MHz)  -  [DDR2-800]
    Format :   Regular UDIMM (133.35 x 3)
    Size :   2048 MB (2 ranks, 8 banks)
    Module Buffered :   No
    Module Registered :   No
    Module SLi Ready (EPP) :   Yes
    Width :   64-bit
    Error Correction Capability :   Yes
    Max. Burst Length :   8
    Refresh :   Reduced (.5x)7.8 µs, Self Refresh
    Voltage :   SSTL 1.8v
    Prefetch Buffer :   4-bit
    Manufacture :   2000
    Supported Frequencies :   200 MHz, 266 MHz, 400 MHz
    CAS Latency (tCL) :   3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @400 MHz
    RAS to CAS (tRCD) :   3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @400 MHz
    RAS Precharge (tRP) :   3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @400 MHz
    Cycle Time (tRAS) :   6 clocks @200 MHz, 8 clocks @266 MHz, 12 clocks @400 MHz
    Min TRC :   12 clocks @200 MHz, 16 clocks @266 MHz, 23 clocks @400 MHz
    EPP Profile #1 :   Full Performance
    Voltage Level :   2.1V
    Address Command Rate :   2T
    Cycle Time :   2.5ns @400 MHz
    CAS Latency (tCL) :   4 clocks
    RAS to CAS (tRCD) :   4 clocks
    RAS Precharge (tRP) :   4 clocks
    Cycle Time (tRAS) :   12 clocks
    tRC :   21 clocks
    tWR :   6 clocks
    Memory Controller :   DIMM, SDRAM
    Number of connectors :   4
    Max. Module Size :   3072 MB
    Max. Memory Size :   12288 MB
    Supported Speed :   Unspecified
    Supported Voltages :   3.3v
    Error Detection Method :   64-bit ECC
    Error Correction Capability :   yes
    Current/Supported Interleave :   1-way/1-way
    Alex.Sorry about the long post but i wasn't sure exactly what you needed so i figured the more info the better, oh i noticed this scan reading for the temps are just in C not F

  • H61M-E33 B3 - which BIOS version for i5-3570?

    Hi
    My motherboard is MSI H61M-E33 B3,  I was using i3-2100 CPU, but a friend gave me his old i5-3750,  which is far better. I updated my BIOS with Live Update before I swapped CPU's but I guess that my BIOS version is still wrong for this i5, because when I try to run my PC, it beeps 4 times and reset. So my question is, what is exact BIOS version I need for this CPU to work, and where can I download it? I would be really thankful for any help

    Quote from: HenryW on 18-February-15, 08:03:41
    Does it still work with the 13-2100? Did you clear CMOS after BIOS update?
    Yes, and yes. Works perfectly with i3, and I've cleared CMOS, but it didn't help.
    Quote from: Chike on 18-February-15, 08:06:21
    Go to MB support page and check the compatibility list.
    for the last 2 digits/letters, A=10, B=11, C=12 etc, so A2 will be 10.2
    The problem is, on this page - http://www.msi.com/product/mb/H61ME33_B3.html#hero-overview - On the compatibility tab, my i5 is labeled as "7680vC0.zip" - so i guess BIOS version 12.0 - but on the downloads tab, I see only BIOS 12.3 and 12.2, and the next older one is 10.E :/ Should I download this 12.2 or 12.3 versions?
    When I use my Live Update 6 program, with i3 CPU mounted, it tells me that my BIOS version is A.E0 and it is the latest one, and no need to update.
    I'm really, really confused :P

  • GOP / UEFI BIOS Request for MSI R7950 Twin Frozr III

    I am looking for a GOP / UEFI compatible BIOS for my GPU. I believe my 7950 has the 7970 PCB.
    S/N: 912-V803-685B1101002350
    Current BIOS: h-t-t-p://up.ht/18pwh6B
    More Info:Quote
    GPU Device Id: 0x1002 0x679A
    113-C3861300-X03
    113-MSITV277MS.270 TAHITI B0 PROH2 C38613 GDDR5 3GB 500E/150M
    (C) 1988-2010, Advanced Micro Devices, Inc.
    ATOMBIOSBK-AMD VER015.031.000.001.001867
    V27717S.SB
    PowerTune Limit: 200 to 300
    CCC Overdrive Limits
      GPU Clock: 1100.00 MHz
      Memory Clock: 1575.00 MHz
    Clock State 0
      Core Clk: 960.00 MHz
      Memory Clk: 1250.00 MHz
      Flags: Boot
    Clock State 1
      Core Clk: 960.00 MHz
      Memory Clk: 1250.00 MHz
      Flags: Optimal Perf
    Clock State 2
      Core Clk: 880.00 MHz
      Memory Clk: 1250.00 MHz
      Flags: UVD
    Clock State 3
      Core Clk: 300.00 MHz
      Memory Clk: 150.00 MHz
      Flags:
    Thank you!

    Ah, yes you are correct. I just double checked everything and I uploaded the wrong BIOS file and BIOS info (I was messing around with different BIOSes and upped the wrong one). My serial number is 100% correct, though. This is the current one I have:
    015.020.000.000.001083 (Download link: https://mega.co.nz/#!31gBjJ7A!Yr3bX088I8I5aSK0CbEF3hSAm3dhWgVfbb0rvw2 kVVQ)
    Just out of curiosity, what is the difference between that version and the version of the one I linked which was "015.031.000.001.001867"? Is it a newer version? Or is there a newer version for my particular card?

Maybe you are looking for