BIOS WMI Tool (example script?) M58 machines

I have recently been given the job of building a Lenovo X230 using SCCM 2012. I have download the sample scripts and the documentation and have manually tried to set the WakeOnLan bios setting. The command I am using is...
cscript.exe setconfig.vbs WakeOnLan Disable This returns an invalid parameter. Anyone come across this and got a solution? many thanks in advance.

Your post confuses me because the title is about M58 but your text is about X230. So which system are you working with?
ThinkPad and ThinkCentre use different scripts/values. X230 info is here: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-68488
As for your specific example about using setconfig.vbs, it is entered wrong. The item is "WakeOnLAN" and not "WakeOnLan". it is case-sensitive.

Similar Messages

M58 BIOS WMI script not working

Hoping some BIOS gurus might be able to help me out here - I have many m58 machines that need to turn on at midnight every night for updating. I'm trying to remotely remotely enable the "Wake Up on Alarm" function in the BIOS and set it to "Daily Event". I downloaded the m58 WMI scripts from Lenovo, but can't seem to get anything working. From the command line, I'm trying:
C:\cscript.exe SetConfigRemote.vbs "Wake Up on Alarm" Daily Event computername
output: SetConfigRemote.vbs [setting] [value] [hostname]
I've tried putting the setting, value and hostname all in quotes, none in quotes, etc - but then I get invalid parameter errors.
Any ideas?
Thanks,
Dave

Your post confuses me because the title is about M58 but your text is about X230. So which system are you working with?
ThinkPad and ThinkCentre use different scripts/values. X230 info is here: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-68488
As for your specific example about using setconfig.vbs, it is entered wrong. The item is "WakeOnLAN" and not "WakeOnLan". it is case-sensitive.

Are there any information gathering tools or scripts for Sun VDI 3.1.1?

Hi,
Are there any information gathering tools or scripts for Sun VDI 3.1.1?
for problem reporting or service supportting , such as
ut_gather, a ksh based tool to collect all Sun Ray related information from a Sun Ray server.
http://www.sun.com/bigadmin/jsp/descFile.jsp?url=descAll/ut_gather_1_4_6
http://www.sun.com/service/gdd/index.xml
Sun Explorer Data Collector in The Sun Services Tools Bundle (STB)
http://www.sun.com/service/stb/index.jsp
http://www.unix-consultants.co.uk/examples/scripts/linux/linux-explorer/
http://www.slideshare.net/Aeroplane23/information-gathering-2
Windows MPSreports, msinfo32
Redhat sysreport
Suse Siga reportconfig
Any advice would be appreciated.
Thanks,

ut_gather versions are available on MOS under reference #1260464.1

Tool or script to compare two oracle Reports?

Hi:
Anybody knows any tool or script to compare or conciliate two Oracle reports?
The idea is to detect the differences to impact then in the older report.
I tried comparing each .REX with a text file comparing tool (like a Unix diff), but the differences I found were bassed in tables and fields used when we save the report to the database. The main problem using that is how to impact the differences found in the Report Builder.
The following are 2 examples of diferences found, which I dont know how to impact them in the Reports Builder
DEFINE ROSSTRINGS
BEGIN
groupid = 15453
stringid = 0
lfid = 0
cs = 31
len = 7
str = (BINARY)
<<"
5020426f 6f6b0000
">>
END
DEFINE SRW2_LAYOUT
UITAG = 18039
HDR_CHAR_HGT = 65
I'll thanks a lot yours suggestion or ideas.
Sincerily, Sebastian Barbieri

May beu2026 Business Object u2013 Crystal Reports can explain us how is a report built and how we can find the u201Cdata sourcesu201D. If it can beu2026 I will be able to make a program to compare the u201Cdata fieldsu201D in two, three, four,u2026 reports.
It will be very useful to compare if two reports have the same u201Cdata fieldsu201D or, two directories have the same number of reports and everyone in the first folder have the consequent in the second folder.
Of course, when I talking about folders, Iu2019m want to say two folders who contains reports but each folder have reports linked to different DBMS (Oracle, SQL Server,u2026).
Edited by: Carles Hernández on Jan 13, 2009 5:03 PM
Edited by: Carles Hernández on Jan 13, 2009 5:05 PM

CS3 JS fonts example script

I've been changing the fonts example script and would like to apply the font type as the script creates the string of font names.
I've added the line myString.appliedFont = app.fonts.item(myFontNames[myCounter]); which should apply the font type but it does not.
for(var myCounter = 0;myCounter<myFontNames.length; myCounter++){
    myString.appliedFont = app.fonts.item(myFontNames[myCounter]);
    myString += myFontNames[myCounter] + "\r";
myStory.contents = myString;
Any suggestions would be appreciated.
John.

Ok I might be going about this the wrong way.
I ran the FontCollections.jsx which is in the SDK and I get a page with a textFrame and a list of the application fonts. The textFrame uses the default Time Roman typeface. The first font in my list is "911 Porscha    Regular"
In my first post I thought that I might be able to apply the font type to each entry but I don't think this will work as it is a string.
So is it possible to select the text in the textFrame app.findTextPreferences.findWhat = "911 Porscha    Regular"; Then change the type face to match the description?
Can this be done?
John.
I think this might do it myTextChange[0].appliedFont = app.fonts.itemByName(myFontNames[0]);
Message was edited by: John Kordas

Please HELP! = major disk issue - none of OSX "help" tools works (repair/time machine/reinstall)

Hello to all,
My first post, but directly with a very difficult case I suddenly encountered yesterday evening...
When, as usually I opened the lid, it turned on from sleep, as usually, however frozen suddenly... so I did hard turn off... with ON/OFF button. When it turned on again, I had no possibility to put my password, but I was directly faced with "OSX tools" with 4 options (it is in Polish so I try the translation):
1) Recover from Time Machine back up;
2) Install OSX again;
3) Get online help;
4) Disk tool;
I am totally ****** off how this could happen. There was so much stuff on the disk, including the whole Aperture libary with thousends of my daughter photos (she was born a year ago) - priceless stuff.
I would never expect Apple to give me such an "experience"... never heppened to me on any PC's before..
I have 2011 MacBook Pro 13" with Maverics.
This is what I encountered using each of solutions:
1) I use Synology DS209 for Time Machine backup (connected via Lan cable). As far as I remember backup is about 2 months old. Anyway when I choose this option. OSX tool finds the Time Machine in DiskStation, connects to "MacBook Pro" timemachine on the external disk, BUT cannot find any BACKUP further on!!!! I am lost!
2) second, but not preferred option is OSX reinstallation.After initial analysis, and conditions acceptance, I cannot choose the only disk available. I can see only "recovery disk", but when I click on it, there is a message popping up "This disk is blocked". Obviously this prevents any further activities in reinstallation;
3) Third option is BS clearly, no help at all.
4) Disk tool shows me several disks / I am not an expert, so I am not sure how to understand it (Bold is active, standard non active):
- 320,07 GB Hitach HTS54503...
- Macintosh HD
- Superdrive
- disk1
- OS X Base System
I run "check disk" for Hitachi. No problems. Nothing to repair.
I run "check disk" for Macintosh HD => This disk requires repair. So I run "repair". Quickly I get a message "Disk Tool is unable to repair this disk. Please backup as much data as possible, format the disk and recover the files from backup"..... Really????? How can I backup any files???
DEAR COMMUNITY, please HELP!
What to do in order not to loose any data on one hand and on the other be able to use the computer again?
Please note I do not use "recovery CD" all is running without anything in CD/DVD drive.
Thanks in advance for your answers, competence and experience!
Disk tool does not give any solution, showing

You are in a bad situation, because the internal drive has malfunctioned and your only backup is on a device that is not suitable for use with Time Machine, despite what its manufacturer says.
You must try to make another backup now, before you do anything else. It may or may not be possible.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

How to save the selection of quick select tool using scripts?

I am writing a script to record the edit history and I want to save the select area of quick select tool using scripts.

Yeah, that's true. If we active the HistoryState, we can see the selection area in photoshop, however when we save the HistoryState in jpg, the dotted line disappears.

Windows BIOS Setting Tool - function?

In the available download BIOS update files for the ThinkStation E20, there's a "Windows BIOS Setting Tool".
What is the function of this tool?
Thanks.
Solved!
Go to Solution.

it allows two or more identical systems to copy BIOS settings from one to another, saving administrators time in trying to figure out option-by-option how to set up multiple systems identically.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Tool to automatically deauthorize machine

hello
i am trying to find if there is a tool / script that will allow you to automatically deactivate a pc from the itunes account.
thanks

If you don't mind me asking why do you need a tool or script for such a simple task? To deauthorise a computer you just need to open iTunes and on the menu bar go to Store>Deauthorise Computer.
If you don't have access to the computer you are trying to deauthorise that's a slightly different process. You can't deauthorise 'dead' installations or computers you no longer have access to individually. However once you reach the limit of 5 authorisations you have the option to deauthorise them all in one go from your iTunes account and start over. *Just note that you can only use this option once a year*: About iTunes Music Store Authorisation and Deauthorisation

MSIHQ BIOS flash tool problems

I was unable to flash my BIOS using M-Flash so I thought I'd give the MSIHQ BIOS Flashing Tool a try.
After extracting the tool I gave it a try. The first thing that happened was that the tool checked for the latest version and generated the MB Info file:
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in Mon 07/29/2013 at 14:41:27.01
Mainboard: Z87-G43 (MS-7816)
PCB Version: 1.0
BIOS Version: V1.1
BIOS Date: 5/6/2013
Next, I selected the "Fix My USB Key" tool. I selected drive F: and agreed to the disclaimer about erasing the info on the drive. When asked if I wanted to proceed, I answered "Y" and the repair program started.
Next, I got an error address $1C6
The system cannot find the file specified"
So, I retried the tool and after answering "Y" to start, there was a brief falsh of a message to the effect that "Drive Not Responding"
I unplugged the flash drive and plugged it in again and Windows said that the drive was not formatted and asked if I would like to format it. I answered yes and tried to format it in FAT (FAT 32 was not an option for some reason) and after attempting to quick format the drive, Windows returned a message that "Windows was unable to format the device". Next I tried a full format but the result was the same.
Where should I go from here?

Quote from: flobelix on 31-July-13, 00:39:10
The tool creates an own booting stick. Any Win98 files aren't required. After a stick was fixed with the tool and it is used to prepare a stick for flashing it adds all necessary itself. For flashing the beta always use Mode 1 not 2 of the tool. Directly point to the downloaded beta archive and don't decompress it. Basically follow the instructions in the beta section excatly.
https://forum-en.msi.com/index.php?topic=170132.msg1244286#msg1244286
Not true with Z87. Use mode 2 as xmad mentioned in his earlier reply. M-Flash on Z87 works as advertised. If there is an ME update involved, be sure to select BIOS + ME choice, and do not remove the USB stick before the self retart and ME flash is completed.

User guide: MSI HQ USB BIOS Flash Tool

Guide based on USB tool v1.17c
HOW TO properly use the MSI Forum HQ USB Flashing Tool to update your BIOS
This user guide provides a step-by-step explanation for properly using the >>MSI Forum HQ USB Flashing Tool<< to prepare a USB Flash Drive for a safe BIOS-Flash in a pure DOS Environment. The tool itself will not perform the actual flashing operation. It will "only" help you to get your USB Stick set up for an automated DOS flashing procedure which requires final confirmation. (If you should run into any problems before you are prompted for final confirmation in DOS, no attempt to flash has been made yet and there is no danger of a bad flash.)
NOTE: If you are having problems getting your USB device to boot correctly, you may need to format it correctly as the geometry data may be incorrect. You can do that by pickup option "Fix My USB key" from the Tool or by using >>> THIS <<< tool here! For future usage you can skip this step, it need to be done only once if your stick need adjustment.
Symptoms that your USB key need a fix after booting from the USB key:
* Error: "No bootable partition in table"
* Blinking cursor in a top left corner and nothing happens
* "RIVER2 MSI"
* "Error loading operating system"
* "Missing operating system"
* "Disk in drive is not a bootable"
* Booting from selected USB key is IGNORED, the other/typical OS continue to load as usual
If still no change after using "Fix My USB key" Tool's option or HP Formatter Tool as alternative.
Then try with different USB key, the issue is there.
Note: Those USB keys who support "U3 Smart", this "feature" must be removed before proceed.
Refer to followed link: http://u3.sandisk.com/launchpadremoval.htm
Read the three notes that follow first before you move on:
1. Note: Before you even think about flashing a different BIOS, be sure that your system is stable. If it is not stable, make it stable first. (Read >>here<<.)
2. Note: Make sure your system meets the preconditions and system requirements mentioned below before you attempt to use the tool.
3. Note: Do know that flashing your BIOS, be it with the help of the tool or otherwise, is done at your own risk.
Contents of the Guide:
0. Preconditions & System Requirements
1. Basic Description of Functionality
2. Installing/Starting the tool.
3. Choosing a Preparation Method
3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
3.2. Method 2: Processing a BIOS File Directly
3.3. Method 3: SureHands Live Update
3.4. Method 4: Geometry Change
4. Selecting the USB Flash Drive for preparation
5. BIOS Settings, Booting & Flashing
5.1. BIOS Settings to Check
5.2. Booting from USB Flash Drive
5.3. Flashing Procedure/Running MemTest86+ & CMOS-Clear
6. FAQ: Common Problems & Solutions
7. Version History
0. Preconditions & System Requirements
The main precondition for using the tool is a working & healthy Windows installation on the system that needs the BIOS flash. The Tool is designed to work with MSI Retail Boards & Laptops only.
Please note mainboards of other brands and OEM boards that are manufactured by MSI but sold by Medion, HP, NEC and others are not supported. If you have an OEM board that needs a BIOS update read this topic: >>OEM boards manufactured by MSI<<
Supported Operating Systems: All current Windows Versions (32bit & 64bit, any service pack (SP)): Windows NT, Windows 2000, Windows 2003, Windows XP, Windows Vista, and Windows 7.
The second requirement is that you have a fully functional USB Flash Drive that uses the FAT file system (FAT/FAT32). NTFS is not supported. If your USB Flash Drive is using the NTFS File System, reformat it to FAT or FAT32.
As the tool also provides a Live Update Option ("SureHands"), you'll need a working internet connection if you want to choose this method. Not all boards are supported at this point.*
* Check section 3.3 of this guide to see if your board is currently supported by the SureHands feature.
1. Basic Description of Functionality
The MSI Forum HQ USB Flashing Tool will help you to easily prepare an USB flash drive for an automated BIOS flash in a pure DOS environment, which is the safest way to perform such a procedure. The tool will also allow you to run MemTest86+ in a pure DOS environment. However, the preparation of your USB Stick is done in Windows and basically includes two steps:
(1) The device will be made bootable.
(2) All necessary files (incl. BIOS file, actual flasher and MemTest86+ executable) and all DOS commands that are needed to flash/test memory will automatically be implemented.
Because the tool does not reformat your USB Flash Drive*, no files that may currently be on the stick will be lost during the procedure. Just make sure that there is still some free drive space, otherwise there will not be enough room for the files that are needed for BIOS Flashing.
* Excluding the Geometry Change method which will destroy all data on the USB storage device.
2. Installing/Starting the tool
Treat the forum's USB Flashing Tool like a regular application. Download it to and run it from your hard drive, there is no need to copy & start it from the USB Flash Drive that you want to use for flashing. Both, the installer version and the stand-alone version, do precisely the same job. Which of the two versions you use, is solely up to you and your preferences. The stand-alone version can be started directly by clicking on the executable file. The installer version will perform an installation and provide you with an entry in your start menu and a desktop shortcut to start the tool.
When you start the tool a DOS box should open up to provide you with status messages and prompts. Do not close that box unless you want to abort the preparation procedure!
Please ensure that you connect the USB flash drive you wish to use before starting the Tool!
NOTE: If you do not connect your USB storage device before starting the tool, or the tool doesn't detect it. You can still insert the drive letter, as the tool will continue as normal.
The tool will first check, if an MSI mainboard is installed in your system and show you its model name and PCB Version in a message box. Click >OK< to continue to choose the tool's preparation method that you want to use to prepare your USB Flash Drive.
3. Choosing a Preparation Method
If your MSI Retail Board is properly detected and you have pressed the >OK< button in the message box, an option box will pop up that allows you to choose between three different operating modes. The options you can choose from are more or less self-explanatory, however, read the detailed description if you are unsure how to proceed at this point:
3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
Official MSI BIOS-Updates that can be downloaded from the product site of your board model do usually come as .ZIP or .RAR archives that contain the actual BIOS File and the corresponding AWARD or AMI flashing utility (depending on the BIOS Type of your board). If you have downloaded such an archive, you should choose the first method from the option box.
You do not need to extract the files from the BIOS archive. The tool will ask you to point it to the archive you downloaded and automatically extract the BIOS File and the AMI or AWARD flashing utility and put it them on your USB Flash Drive. You don't have to worry about anything else. All you have to do is to remember where you saved the ZIP or RAR file you downloaded:
3.2. Method 2: Processing a BIOS File Directly
If you do not have a ZIP or RAR archive that already contains a BIOS File and the proper flashing utitility, but only the plain unpacked BIOS File, choose the second Method from the option box. In most cases BETA BIOS Files supplied by MSI Support or shared here in the Forum do not come with the proper flashing utility. If the MSI Forum HQ USB Flashing Tool is told to process a plain BIOS File, it will automatically check the type of BIOS File (AMI or AWARD) and then select the proper flashing utility that needs to be used. All you need to do is point the tool to the BIOS-File that is supposed to be flashed:
3.3. Method 3: SureHands Live Update
"SureHands Live Update" is the third operation method you can choose from the option box. It provides a much safer and more reliable alternative to MSI Live Update as the actual BIOS Flash is performed in a pure DOS environment as well. If you decide to use this option, you do not to supply the tool with a BIOS-Archive or a BIOS-File.
Not all MSI Retail Boards are currently supported. With every update of the USB Flashing Tool more boards will be added. At present, you can use the "SureHands" Live Update method with the following boards only (the list will be updated regularly):
AMD based boards:
K8N Neo4-F (MS-7125, PCB 3.0)
K8NGM2-FID (MS-7207, PCB 2.0)
K8N Diamond Plus (MS-7220, PCB 1.0)
K8N Neo3 (MS-7135, PCB 1.0 & 2.0)
K9A Platinum (MS-7280, PCB 1.0)
K9A2 Platinum (MS-7376, PCB 1.0)
K9A2 CF-F (MS-7388, PCB 1.0)
K9N Neo-F (MS-7260, PCB 1.0 & 2.0)
K9VGM-V (MS-7253, PCB1.0)
K9N2GM-F V2 (MS-7509, PCB 1.0)
K9N Neo V2 / V3 (MS-7369, PCB 1.1)
K9N Platinum & K9N SLI Platinum (MS-7250, PCB1.0)
K9N2 Diamond (MS-7375, PCB 1.1)
K9N2 SLI Platinum (MS-7374, PCB 1.1)
K9N2 Zilent (MS-7374, PCB 1.1)
K9N2 Neo-F (MS-7511, PCB 1.1)
DKA790GX Platinum (MS-7550, PCB 1.1)
790FX-GD70 (MS-7577, PCB 1.0)
790GX-G65 (MS-7576, PCB 1.0)
Intel based boards
HydroGenX48C & X48C Platinum (MS-7353, PCB 3.0)
X48 Platinum (MS-7353, PCB 1.0)
X38 Diamond Plus
X38 Diamond (MS-7353, PCB 1.0)
X38 Platinum (MS-7353, PCB 1.0)
EFINITY-FP (MS-7395(E), PCB 1.0)
P35 Neo Combo-F (MS-7365, PCB 1.0)
P35 Neo2 Series (MS-7345, PCB 1.1)
P35 Platinum (MS-7345, PCB 1.1)
P35 Neo-F (MS-7360, PCB 1.0)
G33 Platinum (MS-7345, PCB 1.1 & PCB 1.2)
P965 Platinum (MS-7238, PCB 1.1)
975X Platinum PowerUp Edition (MS-7246, PCB 2.1)
865PE Neo2-P Platinum Edition (MS-6728, PCB 2.0C)
P7N SLI Platinum (MS-7380, PCB 1.0)
P7N2 Diamond (MS-7523 PCB 1.0)
P7N Diamond (MS-7510, PCB 1.0)
P7N SLI Platinum (MS-7380, PCB 1.0)
P6N Diamond (MS-7320, PCB 1.0)
P6N SLI Platinum (MS-7350, PCB 1.0)
P6N SLI-FI (MS-7350 PCB 2.0)
P6N SLI V2 (MS-7346 PCB 1.0)
ECLIPSE SLI (MS-7520, PCB 1.0)
ECLIPSE Plus (MS-7566, PCB 1.0)
P35 Neo3-F (MS-7395, PCB 1.0)
After selecting "SureHands" from the option box, the tool will automatically check for all available official BIOS-Versions for your mainboard. It will also look for the latest available BETA BIOS Version for you board and save that information in a TXT-File on your Desktop:
Note: The SureHands option will not provide you with the latest BETA BIOS, it will only provide the information.
When the tool is done scanning for official BIOS releases for your board, it will give you the possibility to manually choose the BIOS Version you want to flash. SureHands Live Update will not automatically select the latest version and use it for flashing, it will give you the chance of choosing between all available official BIOS releases that are available:
Note that the "May not exist" comment that appears behind some versions does not mean that the BIOS does not exist. If you know the latest BIOS for your board is e.g. v1.8, SureHands will retrieve it even though there may be such a comment. That message is part of a prediction feature that tries to determine future BIOS Releases. If a BIOS version that was predicted by the SureHands feature is not available yet, the tool will tell you if it cannot retrieve the files and ask you to select an earlier version.
3.4 Geometry Change
If the tool fails to make your USB storage device bootable then you will need to use this mode. It will make your drive bootable, select it:
Select your drive then let the tool do it's business.
Once the process is complete, run the tool again via method 1, 2 or 3, restart your computer and try booting from the USB storage device again.
NOTE: This method will destroy ALL data on the USB storage device!
NOTE: This method is available in v1.17 and beyond.
4. Selecting the USB Flash Drive for preparation
When you have chosen one of the three methods from the option list and pointed the tool at the corresponding archive, BIOS File or selected the desired BIOS Version from the list in case you chose to use SureHands Live Update, the MSI Forum HQ USB Flashing Tool will prompt you to enter the drive letter of the USB Flash Drive you want to use for flashing:
Note that certain drive letters are reserved and will therefore not be accepted by the tool (currently A:, B: and C:). If you are sure you have connected an USB Flash Drive to the system that works properly but it does not appear in the table that appears in the DOS box, enter the corresponding drive letter anyway and see if the tool accepts it. This can happen in rare cases, but it is usually no problem.
The tool will check the selected drive and will provide you with status messages. If everything is okay, the message should look like this:
The tool will attempt to make the device bootable and automatically write all files that are needed for flashing to the drive to prepare it for flashing. If the procedure was successful, you will get the following message in the DOS box:
5. BIOS-Settings, Booting & Flashing
If the Tool has prepared your drive for booting & flashing, no BIOS flash attempt has been made yet. Only the preparation process. In order to initiate the flashing procedure, you have to restart your system and make it boot from the USB Flash drive. Before you move on to do that, enter the BIOS Setup and check a few options:
5.1. BIOS Settings to Check
Check USB-related Options in BIOS:
- USB Controller
- USB 2.0 Controller
- USB Legacy Support
- USB Storage Support
- Boot from other devices
- etc.
Not all of these options may be found in BIOS and the precise name may vary as well. Just make sure you checked for such options and that they are enabled (if present).
Another option you should check for is "Boot Sector Protection". If such an option is present in your BIOS, make sure it is disabled because it may make a BIOS Flash impossible.
@all Overclockers: In case your system is currently overclocked, make sure you roll back to default clock and voltage settings before you attempt to start the flashing procedure. Otherwise you increase the risk of an unsuccesful flash, and you most probably don't want something like that to happen.
5.2. Booting from USB Flash Drive
To boot from your USB drive you can either change the boot sequence in BIOS accordingly or just press F11 during POST* to get access to the BIOS Boot Menu. From here, you can select you drive directly without having to adjust the boot sequence in BIOS. Note that your USB Flash Drive may be listed as a hard drive (if you choose that entry you will get another list to choose from).
* Not all mainboards use F11, for the boot menu. If F11 fails for you, please consult your manual for the correct key.
Note: If you have problems booting from your drive, look at the FAQ-Section of this guide and see if any of the tips resolve the issue.
5.3. Flashing Procedure/Running MemTest86+
As soon as the system boots from the drive, DOS will be loaded and you will be displayed with two options. One option will start MemTest86+, the other will begin the flashing procedure. If no choice is made, MemTest86+ will automatically start.
The flashing procedure will automatically be initiated from there. You will see status messages on the screen that will supply you with information and also prompt you for final confirmation for the actual BIOS-Flash. A backup of you current BIOS will automatically be saved to a file on the drive (backup.bin) before the flashing actually starts. You do not need to enter any commands in DOS. All you have to do is acknowledge the information on the screen by pressing a key.
The flash itself will only take a couple of seconds (20-30s at the most). If the flashing is successfully completed, shutdown the system and clear CMOS with main A/C power cable removed from PSU. Read the >>Clear CMOS Guide<< for further information.
After clearing CMOS you have completed the BIOS-Flash.
Guide created by Jack The Newbie and the forum team

Version updated to 1.18x:
* Mode 3 Sure Hands, Live Update:
- Removed beta BIOS query check[global]
- Fixed issue K9N2 Diamond unable to be detected as supported unit if onboard is installed BIOS version 2.4,
add dynamic detection for future versions.
- Fixed issue 790FX-GD70 unable to be detected as supported unit and add dynamic detection for future versions.
- Fixed issue 790GX-G65 unable to be detected as supported unit and add dynamic detection for future versions.
- Add support for 785G-E65, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
- Add support for 785G-E53, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
- Add support for 790GX-G65 Winki ED, prediction BIOS range 2.1 - 2.A
- Fixed issue P7N Diamond unable to be detected as supported unit if onboard BIOS installed is 1.3 and above,
add dynamic detection for future versions.
- Add support for K9A2 Neo2, prediction BIOS range 7.4 - 7.D
- Add support for 790XT-G45, prediction BIOS range 2.2 - 2.B
- Add support for 770T-C45, prediction BIOS range 8.4 - 8.D
- Add support for 770T-C35, prediction BIOS range 8.4 - 8.D
- Fixed issue K9A2 Platinum[V1,V2] unable to be detected as supported unit if onboard BIOS installed is 1.9,
add dynamic detection for future versions, prediction BIOS range extended to 1.F0
- 790GX-G65 board prediction BIOS range extended to ver: 1.D0
- 790GX-G65 board update bios base ver from 1.xx to 4.xx [following new msi rule for this board jumping from 1.xx to 4.xx]
- Add support for 770-C35|C45 boards [p1] BIOS range 1.40 - 1.D0
- Add support for 770-G45 board [p2] BIOS range A10 - AA0
* Add "Exit" option to navigation screen
* Update version info related to boot part
* Update boot part to handle newest features
* Modify Self update sequence of Installer version
* Update internal version check ID
* Mode 4 minor update
* Build and add new Tool's module for newest features
* W32 Tool's exit time part decreased by 10 seconds
* On received OS reboot user request, time delay before execution decreased by 15 seconds
* Update EC decoder
* Update start-up information screen
* Auto store start-up detected information to user's desktop ==> [MSIHQ_INFO.TXT]
Details:
Easy to show machine information on request, instead write down from the screen manually, now just copy/paste can be used from MSIHQ_INFO.TXT
User can check and compare information before and after the BIOS update
Also usefull if didn't remember what was his original BIOS or EC versions before the update, Tool will auto store it there.
And easy can be checked if needs. E.g Tool's log file of each Tool's execution, each report will include date and time as well.
F.A.Q example:
Q: I flashed BIOS on my notebook and now it doesn't work properly.. And i don't remember what was my old BIOS version.. What can i do?
A: Take a look in MSIHQ_INFO.TXT at your desktop, there is auto recorded your detailed information about your notebook before the BIOS update.
So you can easy find what was your original BIOS & EC versions.
Is it OEM one or not, and the exact original BIOS & EC versions.
So you can roll back easy or if crossflashing were done to reflash to correct versions.
Example question:[this board now use 4.xx bios, but don't have time to make a new images.]
It's just example, do not mean that this BIOS used in the example is bad. But generally often can need to roll back to older version.
Or to use Sure Hands because[The BIOS is N/A for manual download, By SureHands no need to browse/search/download and point to the BIOS version, also eliminate any chances to pickup the wrong BIOS, and not at last its more quickly[save a time]]
Q: I flashed my BIOS via MSI Live Update, but the new BIOS has an issues.
How i can roll back to my old BIOS version?
The MSI LiveUpdate can only update to the latest BIOS version, which is not good for me.
And i can't download my old BIOS version manually... Because "This BIOS can only update via Live Update function"
http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1739
How i can re-flash to my original BIOS version and from where can i get it?
A: Run >>Use the MSI HQ Forum USB flasher<<,
then choose Mode 3 [Live Update{aka SureHands}]:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:09:45,15
Mainboard: 790GX-G65 (MS-7576)
PCB Version: 1.0
BIOS Version: V1.3
BIOS Date: 05/08/2009
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:22:38,42
Mainboard: 790GX-G65 (MS-7576)
PCB Version: 1.0
BIOS Version: V1.6
BIOS Date: 11/30/2009
Then choose your old BIOS version from the list:
The followed image used below is a sample from Eclipse board,[no time to make accurate image] but will look similar for others boards too:
In a list will be noticed that there is a future BIOS versions.
Some of them will be not released yet. If you pick some of those the Tool will note you:
It's a part of Tool's BIOS prediction system called "Crystal Ball", when MSI release a future BIOSes for your board,
Tool can find them immediately. By that way the Tool no need to be updated to be actual in each moment
* Add new feature "True BIOS Version Ready"
- Updated Mode 1
- Updated Mode 2
- Updated Mode 3
Details:
Q: What "True BIOS Version Ready" means? Does the Tool show the wrong BIOS version until now?
A: Of course not, the Tool always show accurate info.
The same as CPU-Z/Everest of whatever other Tool.
However Tool also detect EC-FW versions for notebooks:
The "True BIOS Version Ready" Tool's feature is aimed to eliminate user's mass confusion about MSI BIOS versions.
And not only users are confused, but MSI's Live Update is confused too... which confuse users even more..
Few typical real examples of confusion:
"K9A2 CF wont flash to Bios v. 1.A !!!"
Quote from: Fingon on 25-October-09, 16:53:15
Hi MSI,
I have a problem. I have bought a new processor: AMD Phenom II x545. I looked on the support page of my MB (MSI K9A2 CF) and there the CPU is supported from the bios version 1.A. So I wanted to flash the Bios the the newest version (1.A). I used the MSI live update 4 program to flash it via windows mode. But everytime it boots it writes "CMOS checksum BAD", then I hit F1 to Bios and I see the version of my BIOS fell to the oldest version 1.1. Then I tried to flash it thru Flash disc (with boot files) and dos mod. The result is the same. I can flash my MB to version 1.8 but when I try the 1.A it wont flash it and my Bios fell to the oldest version (1.1). I realised that the exe files in version 1.1-1.8 are the same (afud412.exe) but the exe file in 1.A is different (afud4310.exe).
My questions are:
1) How to flash my MB to the version 1.A ?
2) Is version 1.A really needed for AMD Phenom II x545? I guess yes, because CPU was avaible in July 2009 and the bios 1.A went out in June 2009. I am able to flash it only to version 1.8 (december 2008).
Thank you for any help!!
EDIT: After reading this topic: https://forum-en.msi.com/index.php?topic=129204.0 I realised I have the VERSION 1 of this board (I purchased it right after the launch of the MB (November 2007). It means it doesnt support CPU over 95W, but my Phenpom II x545 has only 80W. I still cant update Bios to the 1.A version.
So my third question is:
3) Is the Bios update 1.A only for version 2 of this MB?
Thx for replies!
Quote from: Jack t.N. on 25-October-09, 17:16:16
A CMOS Checksum error is normal and expected after a BIOS Flash and/or a CMOS Clear. The fact that this message appears, shows, that there was actually something programmed to the chip.
If you haven't done that yet, please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup.
The BIOS Version should be shown on the POST Status Screen and there should be a date behind it. Please check the BIOS Date and write it down:
Are you absolutely and entirely sure that what you see is "1.1" and not "1.10"? Because v1.A0 is actually just the hexadecimal notation for v1."10" (one dot ten). The hexadecimal notation is only used in the BIOS File Ending. Once flashed, the BIOS will not identify itself in hexadecimal notation but in decimal code (which means you will never see "v1.A0" after the flash but "v1.10" instead.
Here is a piece of well-meant advice for now and the future: MSI Live Update should be avoided under all circumstances when it comes to BIOS Updates and/or information retrieval regarding your current BIOS Version. Why? Because this tool is stupid and one of there most risky applications for performing a BIOS Flash. Please uninstall it completely.
Why do I call it stupid? I call it stupid because it does not differentiate between hexadecimal notation and decimal notation. It will show you that "v1.A0" is available. The it will flash it, if you allow it to do so. Of course, a v1.A0 Version will always come out as "v1.10" (one dot ten). When you re-run MSI Live Update it will not recognize that v1.A0=v1.10 and tell you again that there is a newer version available (1.A0, which, again, is the same as v1.10, which was just properly flashed).
I believe that the update went just fine, that you are currently using v1.A0=v1.10 and that MSI Live Update is actually just creating a pseudo-problem which is currently confusing you. The pseudo-problem will immediately be out of the world, if you uninstall MSI Live Update and rely on the BIOS ID String as it appears on the POST Status Screen (this includes the date shown there).
If a BIOS Update should ever be necessary again, please make sure that you won't use MSI Live Update but >>Use the MSI HQ Forum USB flasher<< instead.
Quote from: Fingon on 25-October-09, 18:03:44
Thank you for the quick reply!!
Thats exactly what I have JUST found in this post by Svet: https://forum-en.msi.com/index.php?topic=127672.msg974800#msg974800
Yes it is 1.10 of course!! I didnt know that 1.10 = 1.A0 ! Thank you for the reply. Then the MSI live update 4 program is dump that he wanted from me another update of Bios.
So thank you! Problem is solved.
Edit: Yes, because of MSI live update I learned how to flash bios via flash disc. :-) But I was still confused by that 1.10 and of course by program saying me I should update again.. :-P
Quote from: Lostsoul777 on 14-August-09, 05:46:25
I had the same problem with 1.90 bios, so i updated to 1A, i just want to know why Bios Version says: v.1.10 instead v.1A?
Quote from: LinuxGuy on 29-December-09, 01:17:45
My computer does not have a floppy drive. How do I update the BIOS? (I tried the online utility 3 times. It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults. So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around). So either the BIOS is getting updated, but the online tool is not recognizing this or it's not getting updated. Either way, I would like to manually flash it in DOS. Is it safe to burn the setup files to CD and boot from CD into DOS?
That's the same BIOS version... Just the "MSI Live Updater" is not very smart...
H.A=H.10=17.A=17.10 [A=10, H=17], the last "0" suffix in H.A0 means its official version.
Quote
I tried the online utility 3 times. It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults.
So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around).
So ignore this MSI Live Updater's no sense, and stop flashing your BIOS. You already have the latest version installed.
The Tool now will detect and shows BIOS versions alias when the MSI BIOS version is known with more than one name.
So no more flashing and flashing and flashing to the same version because of MSI LiveUpdate suggest again BIOS update...
Also no more confusion:
"What's my BIOS version?" -> I flashed my BIOS to 1.A0 [A7520IMS.1A0], but BIOS says its 1.10
And MSI Live Update also says that i have 1.10 and 1.A0 is available and i should update it. I flashed it again, but its still 1.10?
What's going on?
Just run the MSIHQ USB Flash Tool and will show you all that you need to know
Examples[with real/accurate info]:
MSI Eclipse:
BIOS version 1.9:
BIOS version 1.10:[Tool now shows both BIOS versions alias]
Report stored respective in MSIHQ_INFO.TXT at user's desktop:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:30:55,34
Mainboard: Eclipse SLI (MS-7520)
PCB Version: 1.0
BIOS Version: V1.9
BIOS Date: 09/22/2009
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:37:25,66
Mainboard: Eclipse SLI (MS-7520)
PCB Version: 1.0
BIOS Version: V1.A (aka Version: V1.10)
BIOS Date: 10/27/2009
More examples =>K9N6SGM-V / K9N6PGM-FI / K9N6PGM-F :
More examples =>945GCM5-F V2 (FSB 1333) :
Report stored respective in MSIHQ_INFO.TXT at user's desktop:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:47:34,35
Mainboard: MS-7267
PCB Version: 4.0
BIOS Version: VH.9 (aka Version: V17.9)
BIOS Date: 11/20/2008
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:52:46,26
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VH.A (aka Version: V17.10)
BIOS Date: 06/02/2009
More examples =>780GT-E63 [N/A at MSI web yet] :
For MSI Notebooks such decoding isn't need, examples:
* Add new feature "Triple BIOS flash Recovery Ready"
- Updated Mode 1
- Updated Mode 2
- Updated Mode 3
Details:
The feature include 3 auto prepared BIOS backups for followed purpose:
* Internal BIOS recovery:
- In a failure case Tool perform auto flash recovery [3 attempts, check for success after each and stop flashing if successful] before give control to BK_IO2, notice users about results and give control for manual attempts[if need]. [This a case if system isn't lockup/reboot, if bad flash occur]
- This mode also have own store up to 5 backups[+1, the last saved copy is always backup.bin, if there was older one they become backup1.bin .. till 5]
* BIOS backup stored as AMIBOOT.ROM [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
* BIOS backup detected and stored for M-Flash style boot/recovery [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
Performing test simulations with random generated BIOS versions[including betas] for M-Flash boot/recovery style, some examples:
Copy/paste Tool log file:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:00:53,46
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VD.XB2 (aka Version: V13.33B2)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.DX2
Where:
* V13.33B2 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VD.XB2 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.DX2 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:12:23,95
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VK.VB7 (aka Version: V20.31B7)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.KV7
Where:
* V20.31B7 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VK.VB7 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.KV7 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:18:34,46
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V3.9
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.390
Where:
* V3.9 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
* A7267IMS.390 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:22:24,04
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V8.1B9
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.819
Where:
* V8.1B9==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
* A7267IMS.819 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:25:38,51
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V4.E (aka Version: V4.14)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.4E0
Where:
* V4.14 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* V4.E ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.4E0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:28:16,62
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V1.BB1 (aka Version: V1.11B1)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.1B1
Where:
* V1.11B1 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* V1.BB1 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.1B1 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:31:57,78
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VI.FB5 (aka Version: V18.15B5)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.IF5
Where:
* V18.15B5 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VI.FB5 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.IF5 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:36:02,40
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V7.O (aka Version: V7.24)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.7O0
Where:
* V7.24 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* V7.O ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.7O0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:39:11,84
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VC.8B6 (aka Version: V12.8B6)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.C86
Where:
* V12.8B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VC.8B6 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.C86 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:49:38,46
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VG.PB6 (aka Version: V16.25B6)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.GP6
Where:
* V16.25B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VG.PB6 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.GP6 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:53:17,26
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VU.H (aka Version: V30.17)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.UH0
Where:
* V30.17 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VU.H ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.UH0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]

WMI issues in VMware based Machine Windows 2008 R2 Servers affecting SCCM Clients

Dear
Brothers,<o:p></o:p>
I came to
an observation particularly in dealing with Windows 2008R2 Servers Vmware Based
Virtual Machines with SCCM Clients.<o:p></o:p>
Observation:<o:p></o:p>
1. Windows
2008R2 Virtual Machine with Vmware Tools installed (Also depending in the
entries of WMI, I supposed). <o:p></o:p>
When the SCCM Server Pushes the client on this Servers, I found out that the SCCM Client
seems to be installed perfectly but when I tried to perform a remote WMI Query
and the response is displayed below (The RPC Server is unavailable).<o:p></o:p>
Now, I know that this kind of issues is something to do about DCOM Configuration
for Remote Access right?
Well, sad to say the settings has been checked, trippled checked actually to make sure it is correct with the correct permissions required and proven correct up to the last settings.
I even compare the settings to those in some Windows Servers with Working WMI Remote Access.
=========
What I have observed is that when we make a VMware Systems and install the
VMware Tools (see picture below) first before installing the
SCCM Client and the issue regarding WMI Remote access issues happens (The RPC Server is unavailable).
I proved it by creating a new VM Machine, then conduct installation in this order
SCCM Client first and then the
VMware Tools by this way so far the WMI Remote access works perfectly.
Now the Question:
Since we have atleast 70 VM Servers in production with this issue, and I proven that the VMware Tools is something to do with this issue, somehow now I need to resolved this in a logical manner.
For some of us who can guide me to resolved the issue without uninstalling the VMware Tools and fixing the WMI settings and let the SCCM Client work.
Regards,

We also have this issue. Nearly all of our terminal servers. I have to run a script to fix the issue and then reboot. It works, but only for a few days and then it starts all over again...
::to fix "not found" wmi error
::to fix .net calls to wmi repository
::to fix "initialization failure" error
net stop winmgmt
c:
cd c:\windows\system32\wbem
rd /S /Q repository
regsvr32 /s %systemroot%\system32\scecli.dll
regsvr32 /s %systemroot%\system32\userenv.dll
mofcomp cimwin32.mof
mofcomp cimwin32.mfl
mofcomp rsop.mof
mofcomp rsop.mfl
for /f %%s in ('dir /b /s *.dll') do regsvr32 /s %%s
for /f %%s in ('dir /b *.mof') do mofcomp %%s
for /f %%s in ('dir /b *.mfl') do mofcomp %%s
mofcomp exwmi.mof
mofcomp -n:root\cimv2\applications\exchange wbemcons.mof
mofcomp -n:root\cimv2\applications\exchange smtpcons.mof
mofcomp exmgmt.mof
For the Update on this case Microsoft didn't find out direct connection of WMI issue to any contributors, however the clients
from Microsoft and and 3rd party application such as VMware is highly dependent on WMI for its total function.
Things that we have learned:
1. Your script is the primary solution as recommended as well by Microsoft, but this is to restore the WMI to its healthy State.
Is the error gone?
no definitely not.
Note: The WMIDiagnostic tool does not help to isolate at all, not even Microsoft is validating the credibility of its generated Logs from this tool.
2. You need to apply the Hotfixes recommended by Microsoft to eliminate the WMI repository to increase its capacity which contributes to the Service to stall. Deliver the Patches via SCCM or any means of your patch deployment.
3. Don't forget to reboot the Affected Server every Hotfix installation, this seems fix the issue. For 3 months now the usual system who got the WMI issue most of the time is no longer encountering the WMI errors. So far this is the solution, what causes
the issue? according to Microsoft the cause is the absence of the patches.

SCCM 2012 Machine Policy and Software Update Script - Remote Machine

Apologies if this has been answered before as there are so many good posts on this forum. What I am after is a simple VB script that I can stick on a remote machine and then use PSexec to run the .vbs file.
I need to be able to carry out a Start/Control Panel/Configuration Manager (32 bit)/actions Tab
Machine Policy Retrieval and Evaluation Cycle (Initiate)
Software Updates Deployment Evaluation Cycle (Initiate)
This is on SCCM 2012. Also if the VB Script can come back to say if it has been successful or not would be awesome :)
I would like to type something like:
Psexec \"address of machine" SCCM.VBS (where the sccm.vbs is located on the remote machine)
Then for the vbs to carry out the 2 initiations above on the remote machine and then return with "Initiation Complete" or words to that affect.
Thanks

Hi,
I'd highly recommend using some of the available right click tools instead. Here's one example:
http://myitforum.com/myitforumwp/2012/05/07/config-manager-2012-right-click-tools/
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Overclock / bios mod tool for OS 9

I recently flashed a PC Radeon 8500LE to a Mac Radeon. I did run some tests and it seems that this LE-version cannot handle "real" 8500's settings as it shows artifacts after some Quake III gaming, I knew that this could happen.
For Mac OS X, there is kind of software:
http://thomas.perrier.name/graphiccelerator.html
This would let me to modify (=lower) clock settings and make the card to work, then I could flash a new bios to the card and make settings permanent. Is there similar tool for OS 9 as I cannot install OS X for a while?

Yes, but I nearly ending up with a smoking Powerbook G3. Not worth the effort. If you need a fast machine, best to buy one already going at the speed you desire. See my FAQ*:
http://www.macmaps.com/usedrefurbished.html

Adobe Bridge Tools Illustrator scripting

Hello!
I do a lot of processing of PDFs. In Illustrator I resize them, resize the artboard, save as .ai, then export a TIFF.
I notice in Bridge under tools, there is an ILLUSTRATOR menu.
How difficult would it be to create in bridge a menu item that opens the selected PDF(s) in ILL and run the processes?
I ask because i spend a lot of time in ILL manually processing these files. It would make a lot of sense to create an automation.
Thanks
Max

Without the startup script for PS you can not commuinicate with it. Google this. Might also try resetting preferences. Hold CRtl key or alt key and start Bridge. Should get a reset window.

BIOS WMI Tool (example script?) M58 machines

Similar Messages

Maybe you are looking for