Bios won't detect new WD black edition 1TB HDD

Hi in the past i open this same topic an lost track of who reply . So here it goes again few months back i order WD- Black Edition 1TB hard drive but when it came to install it with my MSI 760 GM - E51 it keeps telling me Secondary Master Hard Drive error. Then when accessing the Setup bios menu i would then see these this next to sata 5 [] where i have the hard drive install. It doesn't matter which sata port i install it in to i get the same result . I have also purchase new sata cable an no luck . I have also tested this same hard drive in another desktop an it works fine
MOBO - MSI 760Gm-E51
HDD- WD Black Edition 1TB
Ram- 8GB
Bios version V1.10 02282011
Can someone please help me ?

Only one Topic is needed -> https://forum-en.msi.com/index.php?topic=172591.msg1257054#msg1257054
-- TOPIC LOCKED --

Similar Messages

Satego x200 - BIOS won't detect SSD but windows 7 will for OS use

need some help here i got the latest bios 2,50 and my bios wont detect the ssd but one i boot into windows 7 from my hdd it gets detected and i want to use the ssd as boot drive,please help

guys im starting to think yall misunderstood , first off i got a maxflash 256gb ssd firmware 1571 second i said it gets shown in the first page of the bios , but its nowhere shown in boot devices list ,and if its not shown in boot devices list of course theres no way booting off of it so i cant use it as os drive, now heres the clue once im in windows 7 it gets detected as ssd , i think the onboard rom controller for hdds needs an update but how ,-,- any help would be appreciated,peace
Message was edited by: breakdown234

MS-6570 5.6 BIOS won't detect proper CPU speed

I recently flashed my BIOS to the newest 5.6 release, only to have it detect my Athlon 2400 as an 1800. I have the FSB set at 133 mhz, but the CPU multipler only goes up to 13 when I need it at 15 to work correctly. Should I just flash an older release?

thats a Nforce broard and that has no 5.6 bios?
Take a look MS 6570
You must check your your board again and make sure it MS 6570 and if it does then you flash with wrong bios
If 6570 is not the product number than please tell us what it is.

Portege 3110ct: BIOS won't recognize new 20GB HDD

Just installed a P002608, 20GB hard drive in a Protege 3110ct, now the BIOS will not recogize the new hard drive.

I own a 3110 in which I replaced the harddisk for a 40gb 2.5 HD without problems
So there must be another problem !
Did you test your HD in another laptop or USB-HD-case ??
If okay, check the jumper-setting ( must be "master" ) and be sure to update the bios to the last version ( look at the toshiba-website )
It's allways a problem to install a new OS on these small porteges, be sure to format your HD initially to FAT32, NTFS will not be recognized !
On this forum you can find a lot of information about this subject ( use search-function )

MSI K9N2G-Neo and Athlon X2 7850 Black Edition - BIOS Options Problem

Hello, i have this MSI K9N2G-Neo + Athlon X2 7850 BE (REVEEN RCCT 0901SP + Tuniq TX2) + 4 x 2048MB OCZ Platinum 1066MHz, 700 watt real power supply, etc...
The problem is the bios v1.2 and new v1.3 that appears Disabled the CPU Voltage option for this cpu, in gray color or default values and i can´t change it. Now the cpu is running well at 3.2 ghz OC (200x16) some stable but not at all, i think it is a weak OC for a Black Edition CPU. Before i was using the X2 7750 BE and was the same problem with the CPU Voltages Bios´s options too.
Why in the bios isn´t enabled the CPU Voltage option ?
And why this Athlon Kuma don´t appear in the CPU SUPPORT LIST ??
This mother says that support CPUs up to 140watts and AM3... is it sure or it is a lie ?
This bios v1.3 is a few days new, Now i have to wait another 5 moths for a new one ??
Thanks a lot.

Quote from: Svet on 05-July-09, 04:59:39
https://forum-en.msi.com/index.php?topic=128250.0
Where you saw that?
Hi Svet... i did what u said me with numpad and nothing happended cause the cpu option is disabled. I think there is some kind of incompatibility between this mother and Kumas Core CPU... whit the 7750BE was the some issue too.
MSI official web page and 140Watts mothers support shows it.
Slds

Laptop Bios cannot detect new HDD but still able to boot into windows

I have a Pavilion Dv5 1010tu which the original HDD have died. So i bought a new Samsung 320GB Sata and install Windows 7 on it. After Windows installation finished successful, I manually restart the laptop without Windows setup disk and it stop at dos screen with the error message :
Boot device not found.
Please install an operating system on your hard disk.
Hard disk (3F0) ...
I check bios and it didn't show any hard drive but when i re-insert Windows setup disk and restart, it can boot in windows without any problem. How can i fix this issue? I already update Bios and run hard disk self test though Bios setup without failed but it still not recognize HDD
Edit: My original HDD was Hitachi 250GB Sata
Bios version F.21A

~if advanced mode is off turn it on~ It sound easy huh. I would like to ask How can I access to advanced mode in Bios of Hp laptop? It's impossible.
defective drive ??? It a newly purchased HDD and it run perfectly fine, i'm posting this message using the laptop i mention above with this HDD as the only hard drive and installed with Windows 7
Any other idea/ help will be very appreciated , please

I have a new Ipad 2. iTunes won't detect it.

I have a new iPad 2, i need connect my iPad with iTunes to use. But iTunes won't detect it. I used lastest version iTunes and win7. When i connect iPhone 4 with my laptop, it's good. But it can't recognize iPad2. What's the probleme here?

I have a similar problem, but it began when i installed iTunes 10.5.2.11 on my windows 7 computer and tried to install the latest update to ipad2 software. Prior to installing the new itunes, i had been able to sync with itunes easily and as expected.
After installing the new version of iTunes - the ipad2 began to act strangely:
it did not charge correctly even when connected to OEM power adapter ("not charging" message appeared when plugged in)... this still appears to be an issue, though it does not happen all the time.
the computer no longer recognizes the ipad device (i have tried different cables and it does recognize my ipod nano)
i am afraid to reset the ipad for fear that i will still not be able to connect afterwards and i will have lost all the apps currently installed.
Any hints on how to go about fixing this issue?

I have photoshop cs6 om a pc. My coumper guy took my old c drive and cloned it to a new oneand installed it. now when I go into bridge it won't let me do any editing. I can't put stars or colors on the photos.

I have photoshop cs6 on a pc. My computer guy took my old c drive and cloned it to a new one and installed it. now when I go into bridge it won't let me do any editing. I can't put stars or colors on the photos.

>I am trying to load my new programs onto this laptop
Actually, no you're not. You're trying to load old programs on this computer - programs that are based around the old (dead?) Mac OS 9, not Mac OS X.
The main problem is that Mac OS X no longer comes with Mac OS 9. If you want to run Mac OS 9 applications you can, but you'll need to source a copy of Mac OS 9 and install that before you can. Off hand I don't know of any sources for Mac OS 9.x. Apple no longer sell it. eBay might be an option.
Either that, or just use Mac OS X applications. You'd probably prefer that anyway.
Finally, as an aside, this doesn't really have anything to do with AppleScript, so posting in the appropriate forum might get you better luck.

My HDD won't detect in BIOS

Yesterday I bought HDD DT01ACA300 and it won't detect.
I've tried it on two motherboards (different ports and different controllers: AMD chipset, Intel chipset, JMicron) with different power and signal cables (which do work with my Samsung HDD and Lite-On SATA DVD drive) but it won't do any good...
It seems that the only thing that could've caused it may be PSU, but I can't verify this since I don't have a spare one. I've tried to disable most of unnecessary controllers on MB to lower power consumption, but it haven't helped.
From what I've read on Internet it seems that there's not much I can do by myself, and it's most likely faulty drive, but I still have some hope that I can make it work...
It would be quiet a big problem to return it: I'll have to send it into another city's authorized service center so that they would check it, and only then I can get a replacement (if noone will steal it by then, which may happen...).

This seems to be an common 3.5 SATA III HDD
If your desktop motherboard HDD controller supports SATA (SATA III is backward compatible) then it should not be a big problem to get the HDD running.
Possible its an HDD fault. It pity but something like that can happen.
Would recommend testing another new HDD.

New Acer Aspire v17 Black Edition GTX 960m Overheating Problems?

I just bought and received Acer Aspire v17 Black Edition and started playing some games on it.I always check the bottom of the laptop once in a while with my hand to make sure it isn't overheating.When I checked after some gaming today, the surface was extremely hot so I downloaded the Core Temp software to check what the exact temperatures were. I found out that the temperature of all 4 cores ranged from 85 Degrees to 95 degrees celsius when gaming. I've done some research online and was informed that temperature at this range have the risk of causing internal damage. CoolBoost is on, Active cooling is on. Core Temp might be displaying the wrong temperature anways. Is this normal or abnormal?

I have to agree with Pocopony22. I think the main issue in cooling effectiveness here is the form factor of the case. Being so thin I imagine there isn't much space to allow cooler ambient air to convey the heat out of the system. Although I often wonder why manufacturers don't utilize some dynamics like air multiplication and a "jet" engine effect to use the thinness to create a more forceful air flow... I'm sure there is some reason I am not thinking of since I do not design notebooks for a living. LOL. Anyhow based the data sheets for the 4720hq, the safe max operating temp is 100C and while the 960M is not listed in data sheets I suspect it could handle 90/95C safely. While I personally do not condone such temperatures nor would I settle for those, in theory the processors are safe, the only thing I question is the boards and other components near these since everything is so tight. In the end would I run my CPU at 100C for 4 or 5 hours? No way, I would do like blackice55, throttle the CPU myself (since that way I can adjust my efforts based on a controlled throttling, rather than having to adjust on the fly if the CPU throttles on it's own) and keep the temps down a bit. Follow these simple guidelines to extend the longevity of your device: Play in area with cool ambient temps, not outside on a summer day.Use a cooler unit. Find one with fans that you can adjust the airflow (if you use your cooler on more than one device) or buy with an appropriate air flow direction based on the system cooling flow.Utilize CPU throttling in a controlled manner.Give your computer a rest once every few hours. Let the CPU idle and cool before shutting off. It doesn't take long with the fans running, but can remain hot significantly longer if shut down immediately.BUY ADH warranty. Spend a few hundred bucks now so you don't have to spend another 1-2k later...Device dies from not following 1-5, always have a contingency plan. Regards,-Eli Note: Edited safe temp for GTX-960M since it's temps are not listed in the data sheets.

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Xfce won't detect display after unplugging

Ok, I have 2 monitors at home, unfortunately 1 of the ports in my graphic card won't work.
For certain reasons, I need to use 1st display during the day, and the 2nd during the night.
But, if I just unplugg the cable from 1st display and plug it in the 2nd the screen just won't come on.
When this happens, I can access to tty2 and tty2 detects screen and displays image, restarting lightdm also displays image in display (but somehow this breaks pulseaudio leaving me with no sound :S ).
Any idea?
PS. Of course I have selected the option "Detect new screenwhen plugged" on Xfce Display Settings.
Thank you

NO
This is what want:
1. Startup computer using Monitor A
2. Unplugg HDMI cord from Monitor A and connect it in Monitor B
(After this, Monitor B goes black on tty1 (used by lightdm) and I can only have tty2, tty3 and all others available)
3. Keep picture in Monitor B when plugged, without the need of restarting lightdm or the whole computer
Until now the only workaround is this:
1. Startuo using Monitor A
2. Suspend system
3. Plugg Monitor B
4. Resume system
THanks and sorry for not being that active

Dude, BIOS won't recognize my HD!!

Hey guys check this out:
I got the K7N2G-ILSR about 2 months ago.
Running 512 megs of Samsung pc2700 ram,
430 Antec TruePower,
XP2100 oc'd to 2700,
Geforce4 Ti 4200.
Maxtor 80 Gig primary
WD 80 Gig slave
XP Pro SP1
My problem is with my hard drives. This is what happened about three times now: Every now and then , during POST test my BIOS will not recognize one of my hard drives.
In the past I use to unhook power cord, reset FSB to 100Mhz and clear BIOS. That use to solve the problem, and I had no data loss.
My rig did the same crap yesterday, but this time reset of BIOS ain't helping. I even switched the Maxtor drive which my board will not recognize to my backup box ( kt133, XP1700, 256 meg pc133). My backup box recognizes it during POST, but can not see it in Windows.
I used Windows Disk Manager to initalize and format the drive and I put it back to my original system ,but it still won't detect it. I'm freaking out, ttried just about everything short of buying new drive to fix this crap. This happened earlier with my WD 40 gig drive, which I ended up pulling out and donating to my backup rig. Works just fine there.
What figures?? Any clues....pleez help

SinDiesel666,
It does sound like a drive is failing.
Just to test, put one drive as primary master and the other drive as secondary master. Do not put any slaves on and see what happens.
Good Luck,
Richard

Z87-g45 won't detect video card

I just got a 87-g45 and the on board graphics work fine with my dvi cable. I put in my gtx 660 but it won't detect it at all. I tried putting it in another computer and the card works fine. I saw another thread with a similar problem: https://forum-en.msi.com/index.php?topic=174991.0
I just flashed the bios to the one linked in the thread, but it didn't help. Should I plan to get a new motherboard or is there another way to solve this?

Quote from: XrBob on 29-December-13, 14:23:50
1. The computer runs fine through the onboard video, I'm using it right now to type this. Is it possible that the computer runs fine even with a bent pin? Is it easy to tell if I have a bent pin?
yes it may run fine if a pin that connects to the PCI-E connector is bent! you need to remove the cooler and CPU and look in the underlying socket with a Bright light and a magnifier to see if they are all strait and in line! with each other from a few angles like from above and then at a 45 degree angle to make sure they all look exactly the same!
Quote from: XrBob on 29-December-13, 14:23:50
3. Does that mean having the motherboard just hanging outside the case?
put the board on a piece of plain cardboard or wood (to prevent shorting) on a table and plug up the power and so on and see if it posts there (most builders do that before they put it in a case or place it on the motherboard box itself)!

Best Bios settings for my new rig

Hi there
I have just put a new rig together & at the risk of soundin like a newb am a little stuck with the Bios. Am used to Intel chips, haven't had an AMD in a long time. At the moment everything is set to optimised defaults. Am not looking to overclock it with any voltage increase. Any safe basic recommendatios would be welcome.
Thanks in advance for any help.
MSI 890FXA-GD70 890FX Socket AM3
AMD Phenom II X6 Black Edition 1090T
Kingston 8GB DDR3 1600MHz HyperX Memory Kit
Corsair Cooling Hydro Series H50
Corsair CWCH50-1 Cooling Hydro Series H50
Xenta 800W Modular Fan PSU
Crucial 64GB Real SSD C300
Sapphire HD 6870

At stock voltage OC should be up to 3.5GHz or so, barely enough to really make much difference in performance in my opinion. I really don't notice much performance increase until OC of 400-500MHz or so. I would suggest a slight voltage increase to 1.35V & try OC to 3.6 or a little more. There's also plenty of available info if you search the web for OC on it. Here's one: http://www.extremeoverclocking.com/reviews/processors/AMD_Phenom_II_X6_1090T_15.html

Bios won't detect new WD black edition 1TB HDD

Similar Messages

Maybe you are looking for