Bios wont see as xp3200

I have updated my bios and according to MSI all I have to do set the cpu fsb to 200 and then auto.  Well it sees it at 1466 and I cant get it to be correct. Please help.
MSI Delta-ILSR
XP3200+ CPU
ATI all in wonder 9700pro
1x512 corsair pc3200
1x120 seagate s-ata
w/ drivers that came with board.
Antec True power 350w PSU.

Hi again,
    No it's not a surprise, when a computer won't run at it's correct FSB it is usually the PSU or CPU-cooler. Try setting J10 & J11 back to user mode and use this link to help you config your bios and see what happens. http://www.amdforums.com/showindex.php?s=&threadid=186506
Your power supply rails look OK. Of course you can never get enough power, I would prefer at least a 480W Antec, 550 is even better if you have the cash.
Good Luck
Rob

Similar Messages

  • Windows wont see Maxtor drive

    Need some help, ive installed XP sp2 {NTFS} on Seagate Sata drive no probs, then i added the Maxtor pata drive to IDE 1 in master, bios sees it, drive manager in xp sees it but windows wont, tried to assign and change drive letter but it wont let me,i right click and it gives the option of changing to dynamic drive, what on earth is dynamic drive i didnt want to risk it because it has my back up info on it from millennium {fat 32}  rebooted and added drive to raid with Seagate and when you exit raid bios it stop and says disk read error, i tried it in slave mode still wont see it, how do you get xp to see a pata drive? help!!

    1. Since you have the drive on the middle connector of the cable it should be jumpered as slave, not master.
    2. In XP a dynamic drive is another way of saying software raid drive. Don't do it as it can't be reverted back without uninstalling and      formatting.
    3. You should be able to do as suggested using the disk management console to reassign it's drive letter once you've jumpered it as slave while it's still on the middle connector of the cable.
    4. You haven't stated if the sata drive is setup in a raid configuration or if you're using it as a standard drive.
    5. Maybe moving it to the secondary ide controller would allow XP to see it properly and allow you to pull all you important info off it then you could format it and use it as a archive or backup drive.

  • When Booting It wont see My HD? HELP!

    Im building my new computer and when i try to boot from my hard drive it doest see it. It keeps booting from the cd. window  xp setup sees the harddrive and copies files . After it reboots and has copied the files it wont see the hard drive and starts all over again.  PLZ help im going crazy!!!

    Make sure after you install Windows you go into the BIOS and change the boot order so your HDD is first on the list.
    (Oh, and after Windows is installed, you can take the disc out of the drive!)

  • ITunes 10.6.1.7 wont see iPad 2 or 3gs both 5.1 on Windows 7/64

    I just bought an ipad2 and I updated to iTunes 10.6.1.7 before attaching to my pc. Itunes wont see the ipad or now my 3gs that it use to have no issue seeing. My windows vista pc/itunes sees both iphone/ipad fine so it must be this pc or itunes. I also tried different cables and usb ports with no change. I updated the vista pc to the 10.6.1.7 iTunes and it sees both ipad/iphone fine.
    Why doesnt my windows 7/64bit pc see anything all of a sudden?
    How do I fix this? Do I really have to uninstall/reinstall iTunes? Will I lose all my data and backups?
    Thanks

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • IPod touch second generation.  Trying to sync to mac.  Have updated itunes and snow leopard.  When I plug it in, it is recognized in iphoto, not itunes.  ipod is freezing.  Have tried several times to set back to factory settings, but computer wont see it

    iPod touch second generation.  Trying to sync to mac.  Have updated itunes and snow leopard.  When I plug it in, it is recognized in iphoto, not itunes.  ipod is freezing.  Have tried several times to set back to factory settings, but computer wont see it

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Powerbook G4 wont see ipod!

    Uhhhhg I just connected my ipod to my friend's macbook yesterday and put pictures on it through sync. He is running Leopard and I connected to his computer with usb. Now i go home and try to put the pics back on my Powerbook G4. I am running OS 10.4.11 and connecting through firewire....except my computer will no longer see my ipod! Why is this happening? The ipod is working fine on its own. I have reset it...computer still wont see it. Any suggestions?

    Model No. MB029LL is an iPod classic. It does not have the chips inside to work with FireWire. It came with a USB docking cable. This is the symbol for FireWire
    !http://www.build-your-own-cheap-computer.com/images/firewire.jpg!
    and this is the symbol for USB
    !http://www.geeks.com/techtips/2005/Images/icon_usb%5B1%5D.gif!
    The symbol should be at the computer end of the docking cable.
    If it did really work with FireWire, I have no explanation for how you managed to do it. All I know is that FireWire is not supported with the recent iPods. Therefore, you should get a USB docking cable, if you somehow do not have the one that came with that model iPod, and connect using USB. Hopefully, your PowerBook G4 is recent enough to have USB 2.0 ports.

  • My House PC wont See my Mac on our wireless network

    Sorry if this has previously been discussed, but when i searched for this problem, I kept getting "Mac wont see PC" results in my search. but my problem is the other way around. I can see the PC's in the house in my shared folder and I can access one of them and take and send files to that computer, but none of the PCs can see my Mac. Is this a problem with my Mac or the PC?
    I have the settings in my Sharing folder set up, File shareing is turned on and I've selected a folder on my desktop I want the the PC's to see. The users are listed as me, "users" and "everyone" I'm set at Read and write and the other two are set at Read only. And on the side panel under "service" I have File sharing checked off.
    Is there something else I need to do? Or is there something we need to do on the PC.
    As I said before I can see one of the PCs (the desktop upstairs) and share files (on my side) but I can't access the other PC (a lap top downstairs). I can only see the name in the shared folder in my HD side panel. When I click on it, it tells me Connection failed and then asks me for a user name and password for the Pc server. I don't have to do that with the other PC when i access it's C and D drives.
    Help please.

    Couldn't figure out how to edit my OP, so to add:
    I just got my iMac to see the downstairs Lap Top PC's C and D drives and Shared Folder and successfully transfered files. It was a combination of me making appletalk active (not sure if that helped) And selecting the network workgroup name in the WINS window of my network setting window. From there I was able to connect to his Lap top's shared folder. Then My BF switched on his file sharing for his C and D drives which gave me full access to them and not just the "shared folder" he had.
    but the original problem still remains, both his desktop and Lap Top PCs can't see my Mac.

  • Mini wont see my Sony DSC-P73 Camera

    It used to but I must have changed a setting somewhere.
    I have checked the usb port and it reads my usb stick and other Sony Camera phone fine. SO I know its not this.
    I have put the Memory stick from the Camera into a card reader and it still wont see it.
    I have put the camera on a laptop PC and it see's it fine.
    I have put the card reader on the laptop and again it see's it fine.
    When the camera is plugged into the mac, the screen display on the Sony shows a USB connection.
    So I know the USB connector works, the camera works and the Mini can see other devices just not the Memory stick. My only conclusion is I have changed a setting somehow but have no idea what!!!! Any help gratefully received.

    First thing to check on the Mac is, open Image Capture and under Preferences for Image Capture, under the General tab, see what the setting is for "When a camera is connected, open:". It could be that you have no application configured.
    Once you have confirmed the above setting is correct, if things still aren't working right, I recommend you try reformatting the Memory Stick while it is in the camera. Refer to the camera's user manual if you are unsure how to do this. If you have pictures on the Memory Stick that you want to keep, download them to the PC prior to reformatting. Good luck.

  • Tried to update, now comp/itunes wont see phone which only has cable and itunes showing

    Hi,  I tried to update iphone to new update,  I updated itunes first but when I tried to update the phone I got unknown error (code was 1604 i think)  first had phone in dock so tried again and the third time I went to try with the original cable but Itunes/my computer wont see it.  the screen has a picture of the usb cable with arrow pointing to Itunes logo.   I have tried the Apple help which included reset (both buttons 10 seconds)  using different usb port and others from general help.
    Can anyone help get the basic operating system back onto the phone please.

    http://support.apple.com/kb/HT1808

  • Iphone 4 i was updating the phone version and it wiped everything and wont see/recognize the phone at all? please help!

    iphone 4 i was updating the phone version and it wiped everything and wont see/recognize the phone at all? please help!

    If you have a backup, you can restore your last backup with itunes.
    Regards,
    Giuseppe Pignataro

  • 11.1.5 installed yesterday now it wont see iphone or open itunes

    11.1.5 installed yesterday now it wont see iphone or open itune - has anyone encountered a similar problem?

    I had same issue.  I flollowed http://support.apple.com/kb/TS1538 and the actual part that fixed it for me was step 5.  Once I finally found it under DEVICES under "portable devices" the connected type of device was only listed as "Apple Iphone" and nothing was listed under the Universal Serial bus Controllers.  After I followed the directions to install the proper mobile device driver then Itunes was able to see my phone.  My PC then also has the correct device listed under the Universal Serial bus Controllers. 
    It is not enough that your connected device says "Apple Iphone" ... so read into the directions step by step for your OS.  I think this is the fix for most new connection issues seen with Itunes 11.1.5!  Nice bench testing Apple.

  • Itunes wont see ipod

    been having problem and did the 5 R's total restore and now ipod is empty like its new, but now itunes wont see it when I plug it in. it does nothing. In my computer I see the ipod at F drive but it wont do anything from there on out. Any ideas.

    See if any of these articles help.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.

  • HT4623 i cannot get past the screen that shows the itunes icon and the usb plug, and my computer wont see my phone

    i cannot get past the screen that shows the itunes icon and the usb plug, and my computer wont see my phone

    Restore the device.

  • Itunes wont see the music on ipod classic

    itunes wont see the music on ipod classic

    If you can see the songs but they are "greyed out" it's because you have the iPod set to transfer songs automatically. That is also why the padlock icon appears at the bottom of iTunes next to the space used/available.
    If you want the songs to be bold and selectable/editable, then you need to change to manage the content manually.

  • AGP SAWTOOTH wont see more than 896mb RAM

    It wont see more than 896mb of RAM in any combination of the 4 slots. And whats more, if I put four 256mb chips in, it will only see 512mb. So I currently have 3x256 and 1x128...
    This is true with OS 9.1, 10.3 and 10.4...
    Any ideas? thx

    Hello! Have you checked to see if all the ram is the same spec. i have 4 512 meg pc133 sticks in my Sawtooth and it shows 2 gig of ram. OS 9 will only recognize 1.5 gigs as I understand it. I think that OSX has the ability to "lock out" portions of memory that may be out of spec. Tom

Maybe you are looking for

  • Date function doesn't work in Message Subject when scheduling batch

    Hi, When I was scheduling a batch and went to PDF attached E-Mail panel, in the Message Subject line I added a function <<Date(yyyy-MM-dd)>>,but when the email was sent, the date function in the subject didn't show the actual date, just showed the or

  • IPhone 3G wi-fi - no longer connects to wi-fi

    For the last few weeks my phone has not connected to my wi-fi or other wi-fis. It will sometimes see them but has trouble connecting or simply wont see the wi-fi. It works fine for other devices so i know it is not the wi-fi. The phone is now 2 month

  • 2008 R2 Multi-Site Cluster Possible without Third Party Software?

    2008 R2 Multi-Site Cluster Possible without Third Party Software?  I know it has been asked, but I haven't seen a specific answer.  We are using Dell Compellent Storage and I created several read only replicated volumes at our DR site.  I am having i

  • Workflow Builder with R12- configuration

    Need to install Workflow builder on client PC's to access R12 (Linux) for a training environment. I have gone through the documents in the forum, and on metalink, but needed clarification on the following: Is there any additional* configuration requi

  • HELP! Saving text message from original iphone

    I've got the original iphone and I need to know how to save several pages of text for a court hearing. I have tried several suggestions on here to save messages but none are working. I have tried taking a screen shot by holding down the home and powe