Bioshd2..i have been having a problem with this bioshd2 error..no drivers detected..
The comp is an hp 6530f.the first time the prob occured was when my dad unpluged the computer from the surge protecter..upon restart,it just says boot failure insert system disc and press enter.when the comp..was orriginally purchased there was no recovery disc and i never made one.when i do a diagnistic it says bioshd2 error no drivers are detected..i tried changing bios settings and a few other things and nothing.so i turned the comp off and the next day turned it on and it booted up normally.the comp worked fine for about a week then one day my dad moved the comp a few inches to check somthinig behind it when the comp suddenly started to shut down by itself..and when i tried to turn it back on, i got the same thing. bioshd2..idont think my hd is bad because it came back on but what could be causing this problem..i tried alot of different things, even taking the battery out for 12 hours to reset bios and nothing..i left it alone for about a week and when it was turned on again it booted normally.now it is working but im afraid of it happening again..ive looked at all of the wires in the comp and dont see any faulty wires..i checked the power supply because when my dad moved it it shut off so i figured it was that but power seems to be working fine.ive been trying to perminetly fix the problem for weeks now and i dont know what else to check..any help would be awsome thanks.
If the motherboard is touching the case it could cause problems. A short in a wire could cause problems as well.
I don't want to say toss the computer around to see if it happens again, but unfortunately it's one of those things that you might not discover it happens again for another month. At that point you can start with changing out the cabling, it's a rather cheap inexpensive fix, then inspect the motherboard, look to see if there is any point where the board could be making contact with the case.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.
Similar Messages
-
Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek RandallI don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.
-
We have been having a problem with newsletters for a client.
The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!
This happened last month too. It seems to be related to length of the newsletter too. It works on every device except iPhones - so weird.Hi, is anyone else experiencing i-phone only problems on email campaigns? not bashing Apple, just having issues where our newsletter are only having issues on iPhones
-
I am and have been having major problems with my G4
I am hoping someone can help me solve these problems.
Issues I am having with my machine:
1. No sound in the speakers.
2. Red light in audio jack.
3. Very slow performance.
4. Extremely long start-up time for both system and applications.
5. Fuzzy monitor.
6. Monitor clear on the left side, fuzzy on the right.
7. When applications are running, very slow response time when changing from one tool to the other.
8. Most Adobe products do not respond upon start-up or shut-down.
9. Machine locks up, stopping clock, force quit, or any other function I am trying to perform.
10. The machine never behaves the same way twice in regard to start-up shut-down, etc.
The performance and functionality of my machine has become progressively worse. Can anyone offer any suggestions or tips? I see there are many discussions on related topics. My machine has multiple problems and I would like to remedy as many as I possibly can.
Thank you.You've landed in the PowerMac G4 forums for late-model desktop machines like the picture under my name at the left. The G4 PowerBooks have separate forum areas, broken down by model. Find your specific version and follow one of these links:
G4 PowerBook Titanium case 15-inch
G4 PowerBook Aluminum case 12-inch
G4 PowerBook Aluminum case 15-inch
G4 PowerBook Aluminum case 17-inch -
Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below
Then the next step would be a restore as new to rule out corruption in the backup.
-
I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?
Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-) -
I rented a Movie and it has been loading for 3 hours now. Internet connection is fine. Have never had a problem with this before. What's really annoying is that the 24 hour time limit is counting down even though we cant watch it. Any suggestions?
The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
Additionally, your 24 hours don't start until you begin to watch the movie, you have 30 days to start watching the movie. -
We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?
What version of Solman are you using ? Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1 else in 7.01 you use auto reaction methods to monitor .
Regards
Jay -
For everyone having memory problems with this board
I have been working on my memory problems with this board. Memtest failed every pass yet memory was fine and board was fine. Was using Kingstone Value Ram
Set bios version back to 1.7
set preformance to fast
set memory to
2.5
4
4
8
Set voltage to 2.7 if that does not work go to 2.75
now working great no more blue screens or os getting corupt it seems to run like a charm
Thanks to the people who have posted sefull iformation even know you have to dig deep to find it.i was having mem problems with this board. But i set up bios v2.2 - ram voltage 2.75 - performance mode: slow and ram timing by SPD.
Seems to work great for me but my video card is messed up so my comp dies every ones in a while. -
I can't move photos from iPhoto to my secondary hard drive or to a burn folder. I have never had a problem with this before. This is something new. They will not drop into either folder. Nothing happens.
I checked my secondary harddrive and there is plenty of memory.
I emptied my burn folder but the photos still will not drop into it.
I created a new burn folder, no luck with this either.
230 photos is the maximum size of the events I am trying to move from iPhoto to save elsewhere.
I have shut down and restarted my computer. No change. The photos still will not drop out of iPhoto.
My Mac Computer Storage shows that I have 62.2GB free out of 249.2GB (movies, photos and contacts taking up the most space)
My Lacie External Harddrive (2TB capacity) shows that I have 1.79TB available. It shows that 207,729,520,640 bytes (207.73 GB on disk) are used.
I have never had this problem before. It is usually very easy to move my photos from iPhoto.
I am not a computer expert (I work in surgery so don't have a need for lots of computer knowledge) so please explain in simple terms.
Thank you so much for any help you can provide.
I really appreciate it.YES Terence! Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop. But that doesn't explain why I'm having to go that route now. Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore? I really liked the convenience of the click and drag option.
I don't have the time tonight to export and burn a lot of CD/DVDs. I'll try that tomorrow and make sure my photos are moving properly. I also need to export photos to my external hard drive to make sure that route is working.
Wouldn't you know that my Apple Care Plan runs out this Wednesday?! I need to make sure everything is working properly before that expires.
Thank you so much for your help. I really, really appreciate it. -
My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!
I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US -
I am having a problem with my itouch error 3194 is displaying
I am having a problem with my itouch error 3194 is displaying
Hello there, spidermatt1.
The following Knowledge Base article offers up some troubleshooting recommendations for the very issue you're describing:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"
Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have been having a lot of issues with my iPod touch. Whatever I purchase on my iPod I can't seem to transfer it to my iTunes library. If something should happen to my iPod, I wouldn't want to lose all of the music I have purchased. I can't upgrade it either because a box pops up that says everything will be erased from my iPod... I need help!
Might be an authorization issue in iTunes. Try deauthorizing your computer through the Store menu at the top of iTunes and then authorizing it again. Once that is done try transferring purchases from the iPod Touch.
-
I try to click on the games or other users names or anything that opens another link and it crashes. This has been happening off and on for about a month but has gotten regular in the last 4 or 5 days. Anybody have any ideas?? Also, it seems that Firefox has affected Adobe. I am having lots of issues in the last few weeks but when I use Windows I'm OK????
i have the same problem with the above..firefox is running too slow with the games in facebook..but it runs good when browsing my updates, msgs, photos...firefox is totally opposite of IE..IE is faster with the games and slow while browsing..i love to use mozila but when i do games it really pisses me off...hope you could help me..
Maybe you are looking for
-
So I've downloaded some ringtones and have no problems with phone calls and email notifications but whenever I get a text message, I first hear the ringtone followed by droid tone. How can I get rid of the droid tone?
-
DOWN PAYMENT REQUEST - asset number on down payment request.
Concerning this request, you must know that we should use a 'dummy asset number' because down payments are not depreciable. With this dummy asset number (which is not depreciable); we have to : -validate the down payment request - generate the automa
-
My wife recently bought an iPad 3 and somehow managed to get her old email address (not a mobileme address) set up as an iCloud address (i.e., neither me/mac.com or icloud.com). The iCloud account shows up in Settings, but when I click on the Mail ap
-
5s update/restore fail using itunes
i backed up my 5s with itunes so i could update my phone from 7.1 to 8.3; The update/restore failed; I have tried repeatedly; my phone is not functional, and I can't even restore to factory settings; In troubleshooting I have done the following: used
-
HT4113 how do you hard reset 2nd gen with out pass code?
how do you hard reset a ipad with out the password