BIP 11g Enterprise - Need second instance of bip server

we are short of boxes and instead of deploying a full vm just for a second instance, I was thinking of setting up a second instance of bip under the web logic. However, when I try to clone the existing bip managed server, the system is adding it a as a node in the same cluster. That is not good because I am not doing load balancing.
I need a complete second instance with its own ports but managed under same web logic server. Any guidance would be appreciated?
D

Hi Joe
I can't say I've tried Robin's technique to run two presentation servers but from my basic understanding of it, both versions will share the same cache as defined in a single nqsconfig.ini file. Maybe these 2 are conflicting somehow?
I see that a separate instanceconfig.xml is used for each presentation server. I know there are a bunch of advanced, largely undocumented, cache properties you can set in there. I can send you a document listing the various properties if you want to play with it - contact me via my website.
Paul
http://total-bi.com

Similar Messages

OBIEE 10g: Presentation Cache in Second Instance of Presentation Server

Hi everyone,
I've been having an issue with my presentation cache disappearing every couple of minutes.
I'm working with OBIEE 10.1.3.4, on Oracle Application Server on a Linux RHEL 5.4 32bit. I've spun up a second instance of the presentation service using the commands from RNM1978's blog here (http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/). The reason why I have a second instance of the presentation service is for mobile reporting purposes. We have lots of executives using iPhones and the Oracle Business Intelligence Indicators application. The second instance defaults all charts to be PNGs, it also uses a separate, clean catalog, so that the executives don't get lost in all of the out of the box BI Applications content that is in our main catalog.
Everything is setup and working properly, both presentation services are accessible and use the same RPD but different catalogs. The only thing that isn't working is the presentation service cache. A lot of these reports are QTD or YTD so it takes a few minutes to run some. We were hoping to use iBots to create BI Server cache at the beginning of the day. That seemed to help a bit but it seems to clear after a few minutes.
Additionally, before we went to do demos to end users, we would run all the reports from a demo iPhone. Go to do the demo and within five minutes, the presentation cache would have already cleared. I confirmed the same by looking in the Session Manager of the second presentation service.
Does anyone know why this would be happening? I have cache turned on in the bi server and I also have the following settings in my instanceconfigMobile.XML:
<Cache>
<Query>
<CacheMaxEntries>1000</CacheMaxEntries>
<CacheMaxExpireMinutes>720</CacheMaxExpireMinutes>
<CacheMinExpireMinutes>720</CacheMinExpireMinutes>
<CacheMinUserExpireMinutes>720</CacheMinUserExpireMinutes>
</Query>
</Cache>
Are there other settings I need to investigate?
Is this just additional commands I need to run when launching the additional presentation service? Here's the command I'm using:
. ./common.sh
. ./sa-init.sh
sawserver -c /home/oracle/OracleBIData/web/config/instanceconfigMobile.xml >> /home/oracle/OracleBIData/web/log/sawserverMobile.out.log 2>&1 &
Thanks!
-=Joe

Hi Joe
I can't say I've tried Robin's technique to run two presentation servers but from my basic understanding of it, both versions will share the same cache as defined in a single nqsconfig.ini file. Maybe these 2 are conflicting somehow?
I see that a separate instanceconfig.xml is used for each presentation server. I know there are a bunch of advanced, largely undocumented, cache properties you can set in there. I can send you a document listing the various properties if you want to play with it - contact me via my website.
Paul
http://total-bi.com

Add second instance to Enterprise Manager 10g database control

Hi,
I have a server with one Oracle 10g database instance, and I
configured the local Enterprise Manager database control for it.
Now I added a second instance on the server, using the same Oracle
home. Can I manage this new instance using the existing database
control or do I have to configure a second database control using
another port? The documentation isn't too clear on this.
Thanks,
Matthias

You can't manage the two database using database control. you have to go for Grid control only if you need to configure two or more instance.

Can policy agent protect multiple instances of app server

I created multiple instances of Sun ONE App server 7.0, and one web-app in each instance. But When I am installing Policy Agent 1.1 for the second instance of App server, it told me that I HAVE had it installed.
How can I protect multiple instances of App server?

I see another thread on this subject. Thanks.

Minutes, Seconds not displaying correctly in BIP server

Hello:
I am on standalone Release 10.1.3.4
I use the below code to generate my dates in my RTF template.
<?xdoxslt:sysdate('DD-MON-YYYY HH:MI:SS')?>
It works correctly the first time, we run this report from the BIP server....... but from then onwards, the minutes and seconds are frozen.
So when I run it again, the minutes and seconds remain the same ....
Please note that this works correctly when I run it in standalone RTF on my desktop...
Any help is appreciated ... Yesh

Hey Yesh
Make sure you have turned off the document cache for the report. Its controlled by a check box on the Report node of the report editor. If its checked then the cached document will just be shown and the date will not be updated.
Regards
tim

Error while configuring second instance of OIF

Hi,
i am installing OIF in dev environment in clusterred mode. I was able to create one instance successfully, but whille creating second i am getting error.
The parameters of im_config_only.rsp are as below:
[ENGINE]
#DO NOT CHANGE THIS.
Response File Version=1.0.0.0.0
[GENERIC]
#Provide true to create a new weblogic domain. WebLogic Server must already be installed.
CREATE_NEW_DOMAIN=false
#Provide true to extend domain. WebLogic Server must already be installed and the domain must be up and running.
USE_EXISTING_DOMAIN=false
#Provide true to configure components without domain.
NO_DOMAIN=false
#Provide true to expand the clusters in domain. WebLogic Server must already be installed and the domain must be up and running.
EXTEND_CLUSTER=true
#Domain name may only contain alphanumeric characters or the underscore (_) or hyphen (-) characters.
DOMAIN_NAME=IDMDomain
#Provide the complete path of domain home.
DOMAIN_HOME=/users/oif/Oracle/Middleware/user_projects/domains/IDMDomain
#Provide the User Name for WebLogic Domain. The value may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
DOMAIN_ADMINISTRATOR_USERNAME=admin
#Provide the password for WebLogic Domain. Valid passwords are 8 to 30 characters long, must begin with an alphabetic character, use only alphanumeric, underscore (_), dollar ($) or pound (#) characters and include at least one number.
DOMAIN_ADMINISTRATION_PASSWORD=xxxxxxx
#Confirm the WebLogic Domain password.
ADMINISTRATOR_PASSWORD_CONFIRM=xxxxxxx
#Provide the localhost name for Create Domain and machine name on which domain is up and running for Extend Domain and Expand Cluster.
DOMAIN_HOST_NAME=xxxxxx
#Provide the port in which domain is up and running. Required for Extend Domain and Expand Cluster.
DOMAIN_PORT_NO=7001
#Write the complete path to a valid Middleware Home.
AS_HOME_LOCATION=/users/oif/Oracle/Middleware
#Give the complete path to a valid WebLogic Server Home.
WL_HOME=/users/oif/Oracle/Middleware/wlserver_10.3
#Give the name of the Oracle Home directory. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character.
ORACLE_HOME=/users/oif/Oracle/Middleware/Oracle_IDM1
#Give the complete path for an Oracle Instance directory to be created. This is the location where the software configuration files and runtime processes will reside.
INSTANCE_HOME=/users/oif/Oracle/Middleware/oif_inst2
#Give a name for Oracle Instance corresponding to the Instance Home. The Oracle Instance name may only contain alphanumeric and underscore (_) characters, it must begin with an alphabetic (a-z or A-Z) character, and must be from 4 to 30 characters in length.
INSTANCE_NAME=oif_inst2
#Give OID if Oracle Internet Directory is selected for configuration.
LIST_OF_COMPONENTS_FOR_SCHEMAS=OID:
#Set this to true if you want the configuration wizard to assign the ports automatically.
AUTOMATIC_PORT_DETECT=true
#Give the location for the file containing the list of static ports if you manually want to assign ports.
STATICPORT INI FILE LOCATION=
#Provide a password for a new account to connect to the Oracle Virtual Directory administrative service, cn=orcladmin. Use 5-30 characters. Use only alphanumerics, underscore (_), dollar ($), or pound (#). At least one number is required.
OVD_ADMIN_PASSWORD=<SECURE VALUE>
#Confirm the password of Oracle Virtual Directory administrative service.
CONFIRM_OVD_ADMIN_PASSWORD=<SECURE VALUE>
#Provide the base, or the leftmost entry, of the virtual directory namespace that Oracle Virtual Directory will use to set its initial Access Control Lists (ACLs). For example, for the namespace dc=mycompany,dc=com, you would enter dc=com.
OVD_LDAPv3_NAME_SPACE=dc=us,dc=oracle,dc=com
#Provide true to enable the HTTP Web Gateway to be protected by SSL. Oracle highly recommends that you use SSL/TLS for Oracle Virtual Directory's administrative gateway service. Disabling SSL/TLS could result in your server administration traffic being monitored and even compromised.
IS_ADMIN_SERVER_OF_OVD_IN_SECURE_MODE=true
#provide true for securing HTTP client connection information. Give true if HTTP Web Gateway is set to true.
IS_HTTP_WEB_GATEWAY_OF_OVD_SECURE=false
#Provide true for Oracle Virtual Directory to be configured.
IS_LDAP_CLIENT_LISTENER_FOR_OVD_SELECTED=false
#Oracle Virtual Directory includes an HTML-based gateway that provides DSML and XSLT-rendered directory reporting. Provide true to enable HTML-based gateway.
IS_HTTP_WEB_GATEWAY_OF_OVD_SELECTED=false
#Specify a new Administrator User Name to connect to the Oracle Virtual Directory administrative service, For example, for the Administrator User Name you would enter cn=orcladmin.
OVD_ADMIN=cn=orcladmin
#Provide true if OID scheme version is 10g.
OID_UPGRADE_FLAG=false
#Provide true to create OID Schema.
CREATE_OID_SCHEMA=false
#Provide the OID schema name.
OID_SCHEMA_NAME=ODS
#Provide true if ODS schema chosen is already being used by an existing OID . Please ensure that the system time on this Identity Management Node is in sync with the time on other Identity Management Nodes that are part of this Oracle Application Server Cluster (Identity Management) configuration. Failure to ensure this may result in unwanted instance failovers, inconsistent operational attributes in directory entries and potential inconsistent behaviour of password state policies.
IS_SECOND_OID_INSTALL=true
#Provide true if RAC database is used.
IS_OID_RACDB_INSTANCE_NAME_SPECIFIED=false
#Provide the DN of the top node for storing component data in the directory. This can be a realm, or the top node of a branch, instead of the top node of the directory.
OID_NAMESPACE=dc=us,dc=oracle,dc=com
#Provide a 5-30 character password for OID server administrator. Use only alphanumerics, underscore (_), dollar ($), or pound (#). At least one number is required.
OID_ADMIN_PASSWORD=<SECURE VALUE>
#Confirm OID Administrator password.
OID_ADMIN_CONFIRM_PASSWORD=<SECURE VALUE>
#Provide Oracle Internet Directory Server user name.
OID_USER=cn=orcladmin
#Provide a 5-30 character password for PKCS12. Use only alphanumerics, underscore (_), dollar ($), or pound (#). At least one number is required.
PKCS12_PASSWORD=xxxx
#Confirm PKCS12 password
PKCS12_PASSWORD_CONFIRM=xxxxx
#The Server ID identifies the Oracle Identity Federation instance. The Server ID must be unique within the domain per logical Oracle Identity Federation instance. Thus, clustered instances acting as a single logical instance will have the same Server ID.
OIF_SERVER_ID=oif_server2
#Provide true for Advanced Configuration of Oracle Identity Federation. The user would be able to specify the Authentication Mechanism, User Data Store, Federation Data Store and the Transient Data Store.
OIF_CONFIGURATION_TYPE_ADVANCED=true
#Provide true for Basic Configuration of Oracle Identity Federation.
OIF_CONFIGURATION_TYPE_BASIC=false
#Provide Authentication Mechanism for Oracle Identity Federation. Valid values are JAAS and LDAP.
OIF_AUTHENTICATION_TYPE=JAAS
#Provide User Data Store type for Oracle Identity Federation. Valid values are NONE,LDAP and RDBMS.
OIF_USER_STORE_TYPE=NONE
#Provide Federation Data Store type for Oracle Identity Federation. Valid values are NONE,LDAP,RDBMS and XML.
OIF_FEDERATION_STORE_TYPE=NONE
#Provide User Session Store type for Oracle Identity Federation. Valid values are MEMORY and RDBMS.
OIF_USER_SESSION_STORE_TYPE=RDBMS
#Provide Message Store type for Oracle Identity Federation. Valid values are MEMORY and RDBMS.
OIF_MESSAGE_STORE_TYPE=RDBMS
#Provide Configuration Store type for Oracle Identity Federation. Valid values are FILE and RDBMS.
OIF_CONFIGURATION_STORE_TYPE=RDBMS
#Provide true if User Data Store type is LDAP.
IS_OIF_USER_STORE_LDAP_TYPE=false
#Provide true if User Data Store type is RDBMS.
IS_OIF_USER_STORE_RDBMS_TYPE=false
#Provide true if Federation Data Store type is LDAP.
IS_OIF_FEDERATION_STORE_LDAP_TYPE=false
#Provide true if Federation Data Store type is RDBMS.
IS_OIF_FEDERATION_STORE_RDBMS_TYPE=false
#Provide true if Oracle Identity Federation Store is of type RDBMS.
IS_OIF_STORE_RDBMS_TYPE=true
#Provide true if Federation Authentication Mechanism is LDAP.
IS_OIF_AUTHENTICATION_LDAP_TYPE=false
#Provide true if Message Store type is RDBMS.
IS_OIF_MESSAGE_STORE_RDBMS_TYPE=true
#Provide true if Configuration Store type is RDBMS.
IS_OIF_CONFIGURATION_STORE_RDBMS_TYPE=true
#Provide true if Federation Data Store type is XML.
IS_OIF_FEDERATION_STORE_XML_TYPE=false
#Provide the full path for the Transient Data Store database host, listen port, and service name , for example, myserver.mycompany.com:1111:mydb1. Separate the path, port, and service name using a colon (:).
TRANSIENT_RDBMS_HOSTNAME=xxxxxx
#Provide the Oracle Identity Federation schema name for Transient Data Store.
TRANSIENT_RDBMS_USER_NAME=ST_OIF
#Provide the password for Transient Data Store schema.
TRANSIENT_RDBMS_PASSWORD=xxxxx
#Provide true if RAC Database is used for Transient Data Store.
IS_OIF_TRANSIENT_STORE_RAC_INSTANCE_SPECIFIED=false
#Provide true if RAC Database with instance name is used for Transient Data Store.
OIF_RACDB_TRANSIENT_STORE_URL_WITH_INSTANCE=false
#Provide the full path for the User Store database host, listen port, and service name , for example, myserver.mycompany.com:1111:mydb1. Separate the path, port, and service name using a colon (:).
USER_RDBMS_HOSTNAME=localhost:1521:orcl.us.oracle.com
#Provide the database user name for User Data Store.
USER_RDBMS_USER_NAME=scott
#Provide the password for User Data Store user.
USER_RDBMS_PASSWORD=<SECURE VALUE>
#Provide Login Table for User Data Store user.
USER_RDBMS_LOGIN_TABLE=EMP
#Provide User ID Attribute for User Data Store.
USER_RDBMS_USER_ID_ATTRIBUTE=ENAME
#Provide User Description Attribute for User Data Store.
USER_RDBMS_USER_DESCRIPTION_ATTRIBUTE=JOB
#Provide true if RAC Database is used for User Data Store.
IS_OIF_USER_STORE_RAC_INSTANCE_SPECIFIED=
#Provide true if RAC Database with instance name is used for User Data Store.
OIF_RACDB_USER_STORE_URL_WITH_INSTANCE=
#Provide the full path for the Federation Data Store database host, listen port, and service name , for example, myserver.mycompany.com:1111:mydb1. Separate the path, port, and service name using a colon (:).
FEDERATION_RDBMS_HOSTNAME=localhost:1521:orcl.us.oracle.com
#Provide the Oracle Identity Federation schema name for Federation Data Store.
FEDERATION_RDBMS_USER_NAME=dev_oif
#Provide the password for Federation Data Store schema.
FEDERATION_RDBMS_PASSWORD=<SECURE VALUE>
#Provide true if RAC Database is used for Federation Data Store.
IS_OIF_FED_STORE_RAC_INSTANCE_SPECIFIED=<SECURE VALUE>
#Provide true if RAC Database with instance name is used for Federation Data Store.
OIF_RACDB_FED_STORE_URL_WITH_INSTANCE=<SECURE VALUE>
[SYSTEM]
[APPLICATIONS]
#Provide true if configuring in a clustered environment.
IS_CLUSTER_CONFIGURATION=true
[RELATIONSHIPS]
#Provide true to configure Oracle Internet Directory.
CONFIGURE_OID_COMPONENT=false
#Provide true to configure Oracle Directory Integration Platform.
CONFIGURE_DIP_COMPONENT=false
#Provide true to configure Oracle Virtual Directory.
CONFIGURE_OVD_COMPONENT=false
#Provide true to configure Oracle Identity Fedration.
CONFIGURE_OIF_COMPONENT=true
#Provide true to configure Oracle Directory Service Manager.
CONFIGURE_ODSM_COMPONENT=false
#Provide true to configure Enterprise Management.
CONFIGURE_EM_COMPONENT=false
#Provide true to configure federation components.
FEDERATION_COMPONENTS_FOR_CONFIGURE=false
#Provide true to configure management components.
MANAGEMENT_COMPONENTS_FOR_CONFIGURE=false
#Provide the list of components selected for configuration separated by colon. Example OID:OVD:DIP:ODSM
SELECTED_COMPONENTS_FOR_CONFIGURATION=OIF
#Enter the full path, listen port, and service name for the database, for example myserver.mycompany.com:1111:mydb1. Separate the path, port, and service name using a colon (:).
OID_DB_INFO=localhost:1521:orcl.us.oracle.com
#Provide the database OID schema name.
OID_DB_USER=ODS
#Provide the database ODSSM schema name
ODSSM_DB_USER=ODSSM
#Provide the ODS schema password.
ODS_PASSWORD=<SECURE VALUE>
#Confirm the ODS Schema password.
CONFIRM_ODS_PASSWORD=<SECURE VALUE>
#Provide the ODSSM schema password.
ODSSM_PASSWORD=<SECURE VALUE>
#Confirm the ODSSM schema password.
CONFIRM_ODSSM_PASSWORD=<SECURE VALUE>
#Provide false if service name is used.
IS_SERVICE_ID_USED=false
#Provide true if RAC database URL with instance name is used.
OID_RACDB_URL_WITH_INSTANCE_NAME=<SECURE VALUE>
#Provide the Administrator password for Oracle Internet Directory.
OID_ADMIN_PASSWORD=<SECURE VALUE>
#Provide true to create a new metadata repository in the database provided by the user. The schema here refers to the ODS schema for OID.
CREATE_NEW_SCHEMA=false
#Provide true if component schema has already been created using Repository Creation Utility (RCU) into an available database. The schema here refers here to the ODS schema for OID.
USE_EXISTING_SCHEMA=true
#Provide the database user name. The user must have SYSDBA user privileges in order to create the metadata repository.
CREATE_DATABASE_USERNAME=
#Provide the database password. The user must have SYSDBA user privileges in order to create the metadata repository.
CREATE_DATABASE_PASSWORD=<SECURE VALUE>
#Provide the LDAP Type for Authentication Mechanism. Valid values are Oracle Internet Directory,Oracle Virtual Directory,Microsoft Active Directory,SunOne and IBM Directory Server
AUTHENTICATION_LDAP_TYPE=Oracle Internet Directory
#Provide the LDAP URL for Authentication Mechanism. Format:ldap://host:port or ldaps://host:port.
AUTHENTICATION_LDAP_TYPE_LDAP_URL=ldap://localhost:3060
#Provide the user name of LDAP server for Authentication Mechanism.
AUTHENTICATION_LDAP_TYPE_LDAP_USER_NAME=cn=orcladmin
#Provide the LDAP server password for Authentication Mechanism.
AUTHENTICATION_LDAP_TYPE_LDAP_PASSWORD=<SECURE VALUE>
#Provide the LDAP Base DN for Authentication Mechanism.
AUTHENTICATION_LDAP_BASE_DN=dc=us,dc=oracle,dc=com
#Provide the LDAP User Credential ID for Authentication Mechanism.
AUTHENTICATION_USER_CREDENTIAL_ID_ATTRIBUTE=uid
#Provide the LDAP User Unique ID for Authentication Mechanism.
AUTHENTICATION_USER_UNIQUE_ID_ATTRIBUTE=uid
#Provide the LDAP Person Object Class for Authentication Mechanism.
AUTHENTICATION_PERSON_OBJECT_CLASS=inetOrgPerson
#Provide the LDAP User Description Attribute for User Data Store.
USER_LDAP_USER_DESCRIPTION_ATTRIBUTE=uid
#Provide the LDAP User ID Attribute for User Data Store.
USER_LDAP_USER_ID_ATTRIBUTE=orclguid
#Provide the LDAP User Unique ID for User Data Store.
USER_LDAP_UNIQUE_ID=<SECURE VALUE>
#Provide the LDAP Person Object Class for User Data Store.
USER_LDAP_PERSON_OBJECT_CLASS=inetOrgPerson
#Provide the LDAP Base DN for User Data Store.
USER_LDAP_BASE_DN=dc=us,dc=oracle,dc=com
#Provide the LDAP Type for User Store. Valid values are Oracle Internet Directory,Oracle Virtual Directory,Microsoft Active Directory,SunOne and IBM Directory Server
USER_LDAP_TYPE=Oracle Internet Directory
#Provide the LDAP URL for User Data Store. Format:ldap://host:port or ldaps://host:port.
USER_LDAP_URL=ldap://localhost:3060
#Provide the user name of LDAP server for Federation Data Store.
USER_LDAP_USER_NAME=cn=orcladmin
#Provide the LDAP server password for User Data Store.
USER_LDAP_PASSWORD=<SECURE VALUE>
#Provide the LDAP User Federation Record Context for Federation Data Store.
FEDERATION_LDAP_USER_RECORD_CONTEXT=
#Provide the LDAP Type for Federation Data Store. Valid values are Oracle Internet Directory,Microsoft Active Directory,SunOne and IBM Directory Server
FEDERATION_LDAP_TYPE=Oracle Internet Directory
#Provide the LDAP URL for Federation Data Store. Format:ldap://host:port or ldaps://host:port.
FEDERATION_LDAP_URL=ldap://localhost:3060
#Provide the LDAP Container Object Class for Federation Data Store.
FEDERATION_LDAP_CONTAINER_OBJECT_CLASS=
#Provide the LDAP Domain Prefix for Federation Data Store. This value is needed only when LDAP type is Microsoft Active Directory.
FEDERATION_LDAP_AD_DOMAIN_PREFIX=
#Provide the user name of LDAP server for Federation Data Store.
FEDERATION_LDAP_USER_NAME=cn=orcladmin
#Provide the LDAP server password for Federation Data Store.
FEDERATION_LDAP_PASSWORD=<SECURE VALUE>
#Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name.
MYORACLESUPPORT_USERNAME=
#Provide the My Oracle Support Password
MYORACLESUPPORT_PASSWORD=
#Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration
DECLINE_SECURITY_UPDATES=true
#Set this to true if My Oracle Support Password is specified
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
#Provide the Proxy Host
PROXY_HOST=
#Provide the Proxy Port
PROXY_PORT=
#Provide the Proxy Username
PROXY_USER=
#Provide the Proxy Password
PROXY_PWD=
#Provide true if extending the Oracle Identity Federation cluster
EXTEND_OIF_CLUSTER=true
#Provide true if extending the Oracle Directory Service cluster.
EXTEND_ODS_CLUSTER=false
#Provide true if DIP Schema version is 10g.
DIP_UPGRADE_FLAG=false
The error i am getting is :
Checking swap space: must be greater than 500 MB. Actual 8192 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-04-16_02-47-54AM. Please wait ...iamoifat-z2> Log: /users/oif/Oracle/oraInventory/logs/install2013-04-16_02-47-54AM.log
Copyright (c) 1982, 2010, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Verifying data......
[VALIDATION] [ERROR]:INST-07270: Specified instance name already exists in the domain
[VALIDATION] [SUGGESTION]:Provide a different value
configuration Failed. Exiting configuration due to data validation failure.
Please help and let me know if i have missed any thing. As i am new to OIF , also let me know if other details are required

Any one has any idea??/

How to search the indexes in 11g Enterprise Manager Console

Hi,
After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on Indexes we already set at process level which is inbuilt in 10g. I need the same in 11g .
Thanks,
Sagar.

Hi Sagar,
You can define composite sensors in your composite.
Then you will get fields in enterprise manager of that composite instance.(the sensors you have defined will be displayed here)
You can enter the values based on what you want to search the instance. :)
Regards
PavanKumar.M

At odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

at odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

That second one sounds like malware.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

How do I create a second instance of oc4j in a standalone enviroment

I am using OC4J standalone to deploy a sparql endpoint using jena, joseki, and the oracle jena adaptor. OC4J is running on the same server as my DEV and QAR databases. The current instance of OC4J is using a data source called "OracleSemDS" to connect to my DEV database. We are now ready to migrate the endpoint to QAR. As I was setting up the QAR endpoint, I discovered the the jena/joseki tools are hard-coded to use the "OracleSemDS" data source. Therefore, I cannot have 2 endpoints running in the same OC4J instance where one points to DEV and the other points to QAR.
Therefore, I need to create a second instance of OC4J that specifies QAR as the "OracleSemDS" data connection. Can someone tell me how to do that?
Thanks,
Phil

jphilb wrote:
I am using OC4J standalone to deploy a sparql endpoint using jena, joseki, and the oracle jena adaptor. OC4J is running on the same server as my DEV and QAR databases. The current instance of OC4J is using a data source called "OracleSemDS" to connect to my DEV database. We are now ready to migrate the endpoint to QAR. As I was setting up the QAR endpoint, I discovered the the jena/joseki tools are hard-coded to use the "OracleSemDS" data source. Therefore, I cannot have 2 endpoints running in the same OC4J instance where one points to DEV and the other points to QAR.
Therefore, I need to create a second instance of OC4J that specifies QAR as the "OracleSemDS" data connection. Can someone tell me how to do that?
Thanks,
Philgday Phil -- Melli Annamalai from the Oracle Server PM team pointed me to your question. I was an OC4J Product Manager before we bought out BEA and I swapped over to WLS -- so I have some information below that hopefully is of assistance to you.
Since you are using OC4J standalone, the simplest way to get a second instance, is to just clone the existing, whole directory structure of your working OC4J instance into another directory, and configure/run it from that directory. To map the OracleSemDS to another target (QAR) you change the data-sources.xml file in the second instance. If you want to run them concurrently on the same server, you'll need to change the ports in the second instance so they have unique values: default-web-site.xml, rmi.xml, internal-settings.xml, jms.xml. These additional ports can be specified on the command line as a Java property string, albeit this is not a documented nor supported feature. See http://buttso.blogspot.com/2007/02/specifying-oc4j-standalone-ports-from.html for more information.
Now as an example, assuming you have your OC4J you want to clone in the dev directory, and now want to create a second instance of OC4J in qar, I'd do this:
cp -rp dev/* qar
cd qar/j2ee/home/config
vi data-sources.xml
(edit any other files if needed to alter ports) ...
cd ..
java -jar oc4j.jar That should work, and should create the second instance using the current configuration (ie dev) as its basis (including deployed apps). Of course, you'll need to manage them independently from here as they really are just two separate OC4J standalone instances.
Now what else you could potentially do is to create a secondary configuration file subset only which only changes the necessary files to support running the second instance. In this case, you'd make a copy of the j2ee/home/config/server.xml, j2ee/home/config/application.xml and j2ee/home/config/data-sources.xml files, renaming them to qar-server.xml, qar-application.xml and qar-data-sources.xml.
Then do the following:
1. In qar-server.xml file, you'd change the global-application application to point at qar-application.xml instead of application.xml:
<global-application name="default" path="qar-application.xml" parent="system" start="true" />
2. Change qar-application.xml so that it used the qar-data-sources.xml file:
<data-sources path="qar-data-sources.xml" />
3. Change qar-data-sources.xml file so it points to the qar database target.
4. Start OC4J, telling it to use qar-server.xml instead of the default server.xml
D:\java\oc4j-10135-prod\j2ee\home>java -jar oc4j.jar -config config/qar-server.xmlI think you could run into some concurrency problems if you try and run the two instances simulataneously, but in general it should be OK I think if you run them separately.
Another solution here is look at how the application specifies/uses datasources. The hard coding of the data-source name into the applicaiton via a direct JNDI lookup works, but restricts the flexibility you as a deployer/administrator has.
If the application used the Java EE resource-ref approach to look up and use the datasource, then the actual JNDI name of the datasource the application uses it totally abstracted from the actual physical name of the datasource that is created on the container -- so you'd have DEVDS and QARDS as physical datasources configured and running on OC4J -- and what happens is that as you deploy the application, you essentially map its lookup and use of OracleSemDS (which would need to change to a java:env/ namespace) to the physical datasource you want it to use (DEVDS or QARDS for example). You can easily alter this post deployment by changing the generated orion-application.xml file to point at the alternate physical datasource. Following that, you can also create separate deployment plans which map the app to the different datasources, then feed this in with the deployment operation so that the correct mapping to either DEVDS or QARDS is done during the deployment process.
I don't know what scope you have to change the application so the above may not be possible -- you'd need to change the lookup code so that it uses the Java EE reference model and change the meta-inf/application.xml to add the corresponding resource-ref entry which declares the logical datasource name that needs to be mapped on deployment.
Another approach here may be to use an application embedded datasource, where you put a data-sources.xml file into the application archive itself (along with an orion-application.xml file which references it) whereupon at deployment time, a datasource specific to the application will be created. In this manner, you'd have say two copies of the same application to deploy (DEV, QAR) which contain different data-sources.xml file. From memory, each application will have its own JNDI namespace so their datasources can co-exist with the same names, with application level data-sources overriding server level ones. Since you'll most likely want to keep the same context-root for the web modules (which has to be unique per server) you'll generally need to run just one of the applications at a time. I'd do this like this: deploy one, stop it, deploy the other, stop it, then start only the one you need to test. In that way, you'll have one copy of the application running (either DEV or QAR) and one datasource definition running within it.
Here's some documentation links to get you going:
Managing Application Lifecycle (start, stop): http://download.oracle.com/docs/cd/E14101_01/doc.1013/e13978/adminclient.htm#BABHJAFE <-- describes admin_client.jar but general principles apply to ascontrol management of application.
Packaging and Testing Applications: http://download.oracle.com/docs/cd/E14101_01/doc.1013/e13979/packag.htm#BHCFBEEC
Application Level DataSources: http://download.oracle.com/docs/cd/E14101_01/doc.1013/e13975/datasrc.htm#CHDIBFHG
Using Deployment Plans: http://download.oracle.com/docs/cd/E14101_01/doc.1013/e13980/deployplan.htm#CHDFEFAE
cheers
-steve-

Can I install a second instance of i-Calender on the server where right now is running the first instance? How?

The first instance is running on a Sun R420 Enterprise
server. The second instance will run in the same server.

When you say "Authorized" you mean in the sense of Itunes Store Authorized? if so the system in Question is authorized it is my primary Workstation and was waiting until iCloud came out to update to Lion. My MBP , and 2006 MP are all running Lion and are part of the 5 systems "authorized". I did not run into this issue with either the MBP or the MP when i installed and I bought two copies at the same time on my the first day Lion was available.
Do you know the mechanism with which the App Store tracks purchases on different computers prior to iCloud coming out?
once again thanks for your response
chris meredith

Issue in executing contains Query(Oracle 11g Enterprise E on Linux RHEL 4

Oracle Version: 11.1.0.6.0
We are facing problem in executing contains Query :
1.When length of string inside contains clause goes beyond 4000 it gives error ORA-01704: string literal too long
2.We try to modify query by breaking it into multiple contains clause but it was not giving good performance (performance degrades as number of contains clauses increases.)It seems accessing same index multiple times becoming costly and taking more time. (We can see same domain Index has been accessed 3 times for 3 contains clause ()
3.We used multiple varchar(4000) type bind variable in single contains clause but giving error
     ORA-29902: error in executing ODCIIndexStart() routine
     ORA-01489: result of string concatenation is too long
4.We used bind variable of type clob but giving error
Error:
ORA-29902: error in executing ODCIIndexStart() routine
     ORA-20000: Oracle Text error:
     DRG-50857: oracle error in drexrstart_clob
I read from article
http://www.oracle.com/technology/products/text/pdf/ot11g_new_features.pdf
That we don’t need to modified query as we had to do with SDATA(as we are doing in above examples) and optimizer will realize that query can be satisfied by the text index and will “push down” the filtering of rows into the text index processor rather than doing table access for filtering on sdata column but when I tried to write that query it was doing table access to filter for filter by column.
My Questions:
a.     Is it possible as mentioned in above point(point number 5) that we don’t need to write SDATA query in contains clause and optimizer will use composite index automatically.
b.     Is there any workaround for using string literal > 4000 char in contains clause.
c.     Why performance degrades lineally when using multiple contains clause.
d.     Can we use in clause in SDATA and write query like this:
i.     SDATA(queryid in ( 'q1',’q2’))
/* Table */
create table ContentStore (ResourceID raw(16), QueryID VARCHAR2(38),IFID VARCHAR2(38),ISTimeStamp number,ISProtocolName VARCHAR2(100),ismimecontenttype varchar2(100),ISToBeDisplayed number(1),IndexedMetaText CLOB)
/* Index */
create index idxMeta on ContentStore (IndexedMetaText) indextype is ctxsys.context filter by queryid,IFID,istimestamp,isprotocolname,ismimecontenttype,resourceid,istobedisplayed order by istimestamp desc parameters('filter ctxsys.null_filter section group GRP_system2 sync(every "sysdate+1/(24*4)" MEMORY 209715200 PARALLEL 2) storage my_text_storage memory 209715200')parallel 2
/* GRP_system2*/
begin
ctx_ddl.create_section_group('GRP_system2', 'BASIC_SECTION_GROUP');
ctx_ddl.add_field_section('GRP_system2', 'FILENAME', 'FILENAME');
ctx_ddl.add_field_section('GRP_system2', 'ISIPSrcIP', 'ISIPSrcIP');
ctx_ddl.add_field_section('GRP_system2', 'ISProxyUserIP', 'ISProxyUserIP');
ctx_ddl.add_field_section('GRP_system2', 'isipdestip', 'isipdestip');
end;
/* 1.When length of string inside contains clause goes beyond 4000 it gives
     error ORA-01704: string literal too long */
select indexedmetatext from ContentStore where rowid in ( select oraclerowid from ( select rowid as oraclerowid from ContentStore where contains(indexedmetatext,'((68.142.91.152 within isipsrcip) or (68.142.91.152 within isproxyuserip) or (68.142.91.152 within isipdestip)) and ((sdata(queryid = ''a51f216a-b211-4b59-89d4-6fcce58a8517'')) or (sdata(queryid = ''c7d7fdb3-e532-42f1-a8b4-450771fc763f'')) or (sdata(queryid = ''7746f95a-01ba-4318-991a-35c2a8a0c73d'')) or (sdata(queryid = ''b0d339d2-ada9-485b-b752-79920a589340'')) or (sdata(queryid = ''33083cc8-7ed0-4a67-81f0-de1f3d673db2'')) or (sdata(queryid = ''0475dea9-288b-4be6-815e-751c98c25f2b'')) or (sdata(queryid = ''8cfb62f4-2bac-4da6-a2c2-84e409f5a810'')) or (sdata(queryid = ''afbf17a7-4170-45f4-9b66-de3860de93d7'')) or (sdata(queryid = ''750a7b1c-db61-4f87-b78f-505bc73aa5df'')) or (sdata(queryid = ''debc06f3-51a8-4278-9d38-f316dfb6340c'')) or (sdata(queryid = ''d2d8d8a8-b691-439f-b6de-618825aad152'')) or (sdata(queryid = ''f6a3515a-4c7b-48d0-8d46-f62541525cd0'')) or (sdata(queryid = ''bef5c527-5e78-494f-832c-12b3967f22cc'')) or (sdata(queryid = ''638a4029-c4bf-42ef-87bc-2cd4a3977dd1'')) or (sdata(queryid = ''1ce38c22-fd80-4d0f-b9ab-1a09941c5809'')) or (sdata(queryid = ''7bbbcc66-f19d-4758-bdd8-2796da1e26fe'')) or (sdata(queryid = ''d3e96050-ab5e-48b7-9445-d884167c8ae9'')) or (sdata(queryid = ''eaf93ce1-fbd8-4bb6-9fb1-12c337878c72'')) or (sdata(queryid = ''ef1ce7ce-9b4a-4f10-9c91-7256f513c709'')) or (sdata(queryid = ''46bf5cda-ada3-41f2-92b0-174ac29c5808'')) or (sdata(queryid = ''59136e92-147f-41c4-ac75-79d921268714'')) or (sdata(queryid = ''fb2382b2-6496-4c9f-a427-2f6db3b9fd16'')) or (sdata(queryid = ''531b3790-ed50-4b83-a0d0-eabfed2b6701'')) or (sdata(queryid = ''4908b148-2432-4041-947c-31ff8e10646c'')) or (sdata(queryid = ''82007d26-d526-42c9-a8d0-5b75e7f08b90'')) or (sdata(queryid = ''002735e8-6886-4bb4-a732-8a9d04165837'')) or (sdata(queryid = ''43f25cba-1d90-4cc2-84d1-a8719c5b1c9f'')) or (sdata(queryid = ''99d9027f-948b-4bc7-9a44-3092d6b29580'')) or (sdata(queryid = ''24221285-ea64-4e14-8c08-a173ec1b7fd9'')) or (sdata(queryid = ''47ad81d7-75cb-4787-91ab-c2bc5c5e1aaa'')) or (sdata(queryid = ''4ff2846f-6d70-4f9b-a5bf-317263c0ccc5'')) or (sdata(queryid = ''c1f5fbe7-72d1-499d-8d72-4aa21a79c97e'')) or (sdata(queryid = ''356f12c5-a769-478d-b57b-8a063be8ee8e'')) or (sdata(queryid = ''f6181853-2e16-4bce-88c0-6602bc853935'')) or (sdata(queryid = ''890f80e9-f3dd-4862-a55c-4f76569df360'')) or (sdata(queryid = ''5e9df138-8377-4841-92de-49bf6ed378a5'')) or (sdata(queryid = ''600b4dfd-e379-4754-8d06-873b593dbd14'')) or (sdata(queryid = ''af1476ac-3742-4272-bc97-584b1bbe3e2b'')) or (sdata(queryid = ''c2eb4e4c-2d09-4be8-b6ba-f1440349ed5a'')) or (sdata(queryid = ''2b819cdb-0941-48fd-8b93-dd1f661933b3'')) or (sdata(queryid = ''dfa094c9-c48c-4ca1-ad06-ead4f1a9d146'')) or (sdata(queryid = ''b1222061-acaf-4e85-80e1-00af07df962c'')) or (sdata(queryid = ''219b0c7b-266e-455b-b7ca-4f760976253c'')) or (sdata(queryid = ''2396f1e3-28f8-451b-a114-29390cec0cf3'')) or (sdata(queryid = ''c7d7fdb3-e532-42f1-a8b4-450771fc763f'')) or (sdata(queryid = ''7746f95a-01ba-4318-991a-35c2a8a0c73d'')) or (sdata(queryid = ''b0d339d2-ada9-485b-b752-79920a589340'')) or (sdata(queryid = ''33083cc8-7ed0-4a67-81f0-de1f3d673db2'')) or (sdata(queryid = ''0475dea9-288b-4be6-815e-751c98c25f2b'')) or (sdata(queryid = ''8cfb62f4-2bac-4da6-a2c2-84e409f5a810'')) or (sdata(queryid = ''afbf17a7-4170-45f4-9b66-de3860de93d7'')) or (sdata(queryid = ''750a7b1c-db61-4f87-b78f-505bc73aa5df'')) or (sdata(queryid = ''debc06f3-51a8-4278-9d38-f316dfb6340c'')) or (sdata(queryid = ''d2d8d8a8-b691-439f-b6de-618825aad152'')) or (sdata(queryid = ''f6a3515a-4c7b-48d0-8d46-f62541525cd0'')) or (sdata(queryid = ''bef5c527-5e78-494f-832c-12b3967f22cc'')) or (sdata(queryid = ''638a4029-c4bf-42ef-87bc-2cd4a3977dd1'')) or (sdata(queryid = ''1ce38c22-fd80-4d0f-b9ab-1a09941c5809'')) or (sdata(queryid = ''7bbbcc66-f19d-4758-bdd8-2796da1e26fe'')) or (sdata(queryid = ''d3e96050-ab5e-48b7-9445-d884167c8ae9'')) or (sdata(queryid = ''eaf93ce1-fbd8-4bb6-9fb1-12c337878c72'')) or (sdata(queryid = ''ef1ce7ce-9b4a-4f10-9c91-7256f513c709'')) or (sdata(queryid = ''46bf5cda-ada3-41f2-92b0-174ac29c5808'')) or (sdata(queryid = ''59136e92-147f-41c4-ac75-79d921268714'')) or (sdata(queryid = ''fb2382b2-6496-4c9f-a427-2f6db3b9fd16'')) or (sdata(queryid = ''531b3790-ed50-4b83-a0d0-eabfed2b6701'')) or (sdata(queryid = ''2396f1e3-28f8-451b-a114-29390cec0cf3''))) and (sdata(istobedisplayed = 1)) and (sdata(istimestamp >= 1245283200)) and (sdata(istimestamp < 1245369600)) and ((sdata(IFID = ''1eeb7036-cd84-4e4d-be90-e720c7db4470'')))') > 0
order by istimestamp desc ) where rownum <= 250)
/* 2.We try to modify query by breaking it into multiple contains clause but it was not giving good performance (performance degrades as number of contains clauses increases.)
Problem: - Performance of below query degrades linearly as number of contains clause for same column increases.
Execution plan :
It seems accessing same index multiple times becoming costly and taking more time. (We can see same domain Index has been accessed 3 times for 3 contains clause ()
select indexedmetatext from ContentStore where rowid in ( select oraclerowid from ( select rowid as oraclerowid from ContentStore where
contains(indexedmetatext,'((68.142.91.152 within isipsrcip) or (68.142.91.152 within isproxyuserip) or (68.142.91.152 within isipdestip)) and ((sdata(queryid = ''a51f216a-b211-4b59-89d4-6fcce58a8517'')) or (sdata(queryid = ''c7d7fdb3-e532-42f1-a8b4-450771fc763f'')) or (sdata(queryid = ''7746f95a-01ba-4318-991a-35c2a8a0c73d'')) or (sdata(queryid = ''b0d339d2-ada9-485b-b752-79920a589340'')) or (sdata(queryid = ''33083cc8-7ed0-4a67-81f0-de1f3d673db2'')) or (sdata(queryid = ''0475dea9-288b-4be6-815e-751c98c25f2b'')) or (sdata(queryid = ''8cfb62f4-2bac-4da6-a2c2-84e409f5a810'')) or (sdata(queryid = ''afbf17a7-4170-45f4-9b66-de3860de93d7'')) or (sdata(queryid = ''750a7b1c-db61-4f87-b78f-505bc73aa5df'')) or (sdata(queryid = ''debc06f3-51a8-4278-9d38-f316dfb6340c'')) or (sdata(queryid = ''d2d8d8a8-b691-439f-b6de-618825aad152'')) or (sdata(queryid = ''f6a3515a-4c7b-48d0-8d46-f62541525cd0'')) or (sdata(queryid = ''bef5c527-5e78-494f-832c-12b3967f22cc'')) or (sdata(queryid = ''638a4029-c4bf-42ef-87bc-2cd4a3977dd1'')) or (sdata(queryid = ''1ce38c22-fd80-4d0f-b9ab-1a09941c5809'')) or (sdata(queryid = ''7bbbcc66-f19d-4758-bdd8-2796da1e26fe'')) or (sdata(queryid = ''d3e96050-ab5e-48b7-9445-d884167c8ae9'')) or (sdata(queryid = ''eaf93ce1-fbd8-4bb6-9fb1-12c337878c72'')) or (sdata(queryid = ''ef1ce7ce-9b4a-4f10-9c91-7256f513c709'')) or (sdata(queryid = ''46bf5cda-ada3-41f2-92b0-174ac29c5808'')) or (sdata(queryid = ''59136e92-147f-41c4-ac75-79d921268714'')) or (sdata(queryid = ''fb2382b2-6496-4c9f-a427-2f6db3b9fd16'')) or (sdata(queryid = ''531b3790-ed50-4b83-a0d0-eabfed2b6701'')) or (sdata(queryid = ''4908b148-2432-4041-947c-31ff8e10646c'')) or (sdata(queryid = ''82007d26-d526-42c9-a8d0-5b75e7f08b90'')) or (sdata(queryid = ''002735e8-6886-4bb4-a732-8a9d04165837'')) or (sdata(queryid = ''43f25cba-1d90-4cc2-84d1-a8719c5b1c9f'')) or (sdata(queryid = ''99d9027f-948b-4bc7-9a44-3092d6b29580'')) or (sdata(queryid = ''24221285-ea64-4e14-8c08-a173ec1b7fd9'')) or (sdata(queryid = ''47ad81d7-75cb-4787-91ab-c2bc5c5e1aaa'')) or (sdata(queryid = ''4ff2846f-6d70-4f9b-a5bf-317263c0ccc5'')) or (sdata(queryid = ''c1f5fbe7-72d1-499d-8d72-4aa21a79c97e'')) or (sdata(queryid = ''356f12c5-a769-478d-b57b-8a063be8ee8e'')) or (sdata(queryid = ''f6181853-2e16-4bce-88c0-6602bc853935'')) or (sdata(queryid = ''890f80e9-f3dd-4862-a55c-4f76569df360'')) or (sdata(queryid = ''5e9df138-8377-4841-92de-49bf6ed378a5'')) or (sdata(queryid = ''600b4dfd-e379-4754-8d06-873b593dbd14'')) or (sdata(queryid = ''af1476ac-3742-4272-bc97-584b1bbe3e2b'')) or (sdata(queryid = ''c2eb4e4c-2d09-4be8-b6ba-f1440349ed5a'')) or (sdata(queryid = ''2b819cdb-0941-48fd-8b93-dd1f661933b3'')) or (sdata(queryid = ''dfa094c9-c48c-4ca1-ad06-ead4f1a9d146'')) or (sdata(queryid = ''b1222061-acaf-4e85-80e1-00af07df962c'')) or (sdata(queryid = ''219b0c7b-266e-455b-b7ca-4f760976253c'')) or (sdata(queryid = ''2396f1e3-28f8-451b-a114-29390cec0cf3''))) and (sdata(istobedisplayed = 1)) and (sdata(istimestamp >= 1245283200)) and (sdata(istimestamp < 1245369600)) and ((sdata(IFID = ''1eeb7036-cd84-4e4d-be90-e720c7db4470'')))') > 0
or
contains(indexedmetatext,'((68.142.91.152 within isipsrcip) or (68.142.91.152 within isproxyuserip) or (68.142.91.152 within isipdestip)) and ((sdata(queryid = ''f22c0b85-2e72-4450-92b7-8f9864c2517a'')) or (sdata(queryid = ''dbc6111b-5fef-4925-93f0-ecf94aa2305b'')) or (sdata(queryid = ''5d737150-3c55-4582-8b2e-8039615b8e69'')) or (sdata(queryid = ''fc8bf42c-2c7a-4506-aa3a-89266ef09ceb'')) or (sdata(queryid = ''7d3f7561-ba99-49fd-9492-214d9f571831'')) or (sdata(queryid = ''73110ce8-6930-4044-90f7-9c5d27bc0b10'')) or (sdata(queryid = ''d1c975a6-607d-4334-a84c-cc63f68bda3a'')) or (sdata(queryid = ''11fd0d2a-540d-4de0-852a-75f1b841b262'')) or (sdata(queryid = ''0dbfd826-497e-4283-8fc6-210c631c4a3e'')) or (sdata(queryid = ''eb2fd3d3-3b14-4092-a373-edd5448802c2'')) or (sdata(queryid = ''a3b69f62-560b-4883-8bd8-d8225af075b4'')) or (sdata(queryid = ''8596dc3e-c062-4527-9df6-e2c6aa10187d'')) or (sdata(queryid = ''5ce0dea4-b005-4185-9a05-7e91f14c7a8a'')) or (sdata(queryid = ''27eb925f-6f0c-4e27-9b57-91d78de703df'')) or (sdata(queryid = ''53b63124-caf4-4e71-ac5b-0e323d2805cb'')) or (sdata(queryid = ''f3dea938-a547-4510-8c24-25e04fa11ec4'')) or (sdata(queryid = ''5d8ebe7d-224b-4731-a1f2-ef1e3b409579'')) or (sdata(queryid = ''69c8dc53-031a-4069-a9e5-89f28cb7a7e0'')) or (sdata(queryid = ''2f65dc5e-63f6-4904-95f8-94c8983931a9'')) or (sdata(queryid = ''9ce16005-5b3b-4691-a624-5a7835e9e982'')) or (sdata(queryid = ''e5f133c5-f8d3-4905-b4db-ceba89476e7d'')) or (sdata(queryid = ''27dd1a53-a158-46ea-b38d-31a57bd7154e'')) or (sdata(queryid = ''cc335826-5e5e-4d4c-9406-2050717bea5d'')) or (sdata(queryid = ''e1ca6d4d-0005-43ec-a121-5574b37231ec'')) or (sdata(queryid = ''4be550f1-8e0a-4748-8186-50228531751d'')) or (sdata(queryid = ''8637ff63-3d0d-4451-9e40-b890d197f6cd'')) or (sdata(queryid = ''5f664e9e-b72f-4ae7-b69d-081ab7873146'')) or (sdata(queryid = ''baecc6fb-e9cf-41df-9fa4-1793b510d474'')) or (sdata(queryid = ''fa27ba4c-4ab8-4bd0-8725-a03c4666dcde'')) or (sdata(queryid = ''918bfb52-7323-4046-b96a-4ef905687dbb'')) or (sdata(queryid = ''3faad930-81c6-421b-84aa-81a9cfdc2c8b'')) or (sdata(queryid = ''7dc5033d-3a27-4058-885a-d103e73328f2'')) or (sdata(queryid = ''8eb4a0ce-654b-42f0-a868-7f7fdb483a13'')) or (sdata(queryid = ''1b44713f-6cbf-4b49-b851-5a500b221c27'')) or (sdata(queryid = ''11febb09-9106-4b92-a43d-cb71696adc90'')) or (sdata(queryid = ''1d84ca10-375e-4e17-a1c0-03515e1cfe5b'')) or (sdata(queryid = ''9cf1f3fd-136c-4abb-8319-6f6c6ddc514c'')) or (sdata(queryid = ''24f5347a-ff20-4245-a4dc-eb2f8c918c91'')) or (sdata(queryid = ''2640ef3c-8a20-4f28-92df-0bc19b058d91'')) or (sdata(queryid = ''af3d0817-0d40-4adb-9655-a5460805a7eb'')) or (sdata(queryid = ''77b86c41-3afc-4c9c-9432-d7a1ee979af2'')) or (sdata(queryid = ''2a26f0d8-1162-4f34-be48-65b409abef28'')) or (sdata(queryid = ''649810b8-0d7b-47ab-8433-8e9bba88583d'')) or (sdata(queryid = ''c4f853ef-cd7c-436d-a16d-03d49681bee6'')) or (sdata(queryid = ''5c1896ce-06af-406c-bfbd-40d2349171bd'')) or (sdata(queryid = ''8d9fe822-f720-4ee5-a80d-552edd778f82'')) or (sdata(queryid = ''f30220c6-5638-47ec-ad98-4768ee299232'')) or (sdata(queryid = ''3faf5d0b-e3c0-4b68-8244-e07334c17326''))) and (sdata(istobedisplayed = 1)) and (sdata(istimestamp >= 1245283200)) and (sdata(istimestamp < 1245369600)) and ((sdata(IFID = ''1eeb7036-cd84-4e4d-be90-e720c7db4470'')))') > 0
or
contains(indexedmetatext,'((68.142.91.152 within isipsrcip) or (68.142.91.152 within isproxyuserip) or (68.142.91.152 within isipdestip)) and ((sdata(queryid = ''c3662b10-98fc-453d-86e1-0c81fe3bb038'')) or (sdata(queryid = ''2b4e7f6e-7871-45eb-b046-bfd4f5d2d84c'')) or (sdata(queryid = ''5af44897-0bc9-4307-bcb1-7f07750e1e25'')) or (sdata(queryid = ''2b57feb3-1681-48db-9856-5d23d69de605'')) or (sdata(queryid = ''47c3939e-d46d-4c7f-9a42-305634642a72'')) or (sdata(queryid = ''476a04ad-6be3-459b-8ab1-6e270416add6'')) or (sdata(queryid = ''61be42b4-11d6-4ff9-a06d-e896690d7fd4'')) or (sdata(queryid = ''97a00e72-2e7d-4c02-b41b-d9d1601bc08c'')) or (sdata(queryid = ''8739fefa-c015-4912-999e-cd9524dffedb'')) or (sdata(queryid = ''61054068-5892-4aaf-ab31-9e6301de9808'')) or (sdata(queryid = ''741a5302-aadc-4bf2-bdcf-b41e95b49d05'')) or (sdata(queryid = ''c13d9ec0-2b18-4838-9bdb-ddb0686fd1d5'')) or (sdata(queryid = ''b02a2176-0ba5-47f4-843d-3d54e3faad77'')) or (sdata(queryid = ''451b906e-3a5c-4ed2-9d94-0a603e6ad94d'')) or (sdata(queryid = ''d1c767d7-cd0a-44c5-a8ff-ce5fa4522ece'')) or (sdata(queryid = ''ca71a03e-26c6-43f3-9755-a248ebaf35b5'')) or (sdata(queryid = ''d93777b8-f03b-49b0-94fc-8019b52c0637'')) or (sdata(queryid = ''e05ebc73-51cb-4112-b685-5104c4884020'')) or (sdata(queryid = ''a1b342c7-9ce0-4aa1-96e8-74621b34d411'')) or (sdata(queryid = ''bde5de4a-b1d4-4edd-9033-6bcba45fcfc2'')) or (sdata(queryid = ''1e345627-c639-4349-95d0-fdfe348935df'')) or (sdata(queryid = ''bd33b778-83c1-4610-a767-f8ce2ade5339'')) or (sdata(queryid = ''54eaa539-e50a-4e95-8d94-f7e95cf0f57b'')) or (sdata(queryid = ''3181ef7a-77cd-405f-9dfa-1c13444efb82'')) or (sdata(queryid = ''0a72bf53-c8ca-405f-9098-9383ed02815a'')) or (sdata(queryid = ''2fb2fff2-b240-46a6-99b8-00521b4325e4'')) or (sdata(queryid = ''5321fa18-a88d-45cb-b8d6-383180cb308b'')) or (sdata(queryid = ''f13bcfdf-d61f-4871-9c74-23ea58204cbb'')) or (sdata(queryid = ''eb5188da-3659-4e7a-b9e4-6985624c3867'')) or (sdata(queryid = ''1679a0ee-6fa7-4c5b-9e0f-09512bc6a74b'')) or (sdata(queryid = ''fd05f61b-5c63-4f99-975e-573ca0f68e8e'')) or (sdata(queryid = ''10802bc7-28bd-43d4-aa24-cf5f9cf6d19f'')) or (sdata(queryid = ''302dbebf-4edd-43a8-93e9-dd6faec8ff14'')) or (sdata(queryid = ''573020da-b5c1-489a-a7d9-eae363e535ef'')) or (sdata(queryid = ''ca514f9e-f4b9-42eb-a8b3-57a384e65540''))) and (sdata(istobedisplayed = 1)) and (sdata(istimestamp >= 1245283200)) and (sdata(istimestamp < 1245369600)) and ((sdata(IFID = ''1eeb7036-cd84-4e4d-be90-e720c7db4470'')))') > 0
order by istimestamp desc ) where rownum <= 250)
/* 3.We used multiple varchar(4000) type bind variable in single contains clause but giving error
     ORA-29902: error in executing ODCIIndexStart() routine
     ORA-01489: result of string concatenation is too long
     variable querystring1 varchar2(4000);
exec :querystring1 := '((sdata(queryid = ''a51f216a-b211-4b59-89d4-6fcce58a8517'')) or (sdata(queryid = ''d1c975a6-607d-4334-a84c-cc63f68bda3a'')) or(sdata(queryid = ''11fd0d2a-540d-4de0-852a-75f1b841b262'')) or(sdata(queryid = ''0dbfd826-497e-4283-8fc6-210c631c4a3e'')) or(sdata(queryid = ''eb2fd3d3-3b14-4092-a373-edd5448802c2'')) or(sdata(queryid = ''a3b69f62-560b-4883-8bd8-d8225af075b4'')) or(sdata(queryid = ''8596dc3e-c062-4527-9df6-e2c6aa10187d'')) or(sdata(queryid = ''5ce0dea4-b005-4185-9a05-7e91f14c7a8a'')) or(sdata(queryid = ''27eb925f-6f0c-4e27-9b57-91d78de703df'')) or(sdata(queryid = ''53b63124-caf4-4e71-ac5b-0e323d2805cb'')) or(sdata(queryid = ''f3dea938-a547-4510-8c24-25e04fa11ec4'')) or(sdata(queryid = ''5d8ebe7d-224b-4731-a1f2-ef1e3b409579'')) or(sdata(queryid = ''69c8dc53-031a-4069-a9e5-89f28cb7a7e0'')) or(sdata(queryid = ''2f65dc5e-63f6-4904-95f8-94c8983931a9'')) or(sdata(queryid = ''9ce16005-5b3b-4691-a624-5a7835e9e982''))) ';
variable querystring2 varchar2(4000);
exec :querystring2 := '((sdata(queryid = ''a51f216a-b211-4b59-89d4-6fcce58a8517'')) or (sdata(queryid = ''d1c975a6-607d-4334-a84c-cc63f68bda3a'')) or(sdata(queryid = ''11fd0d2a-540d-4de0-852a-75f1b841b262'')) or(sdata(queryid = ''0dbfd826-497e-4283-8fc6-210c631c4a3e'')) or(sdata(queryid = ''eb2fd3d3-3b14-4092-a373-edd5448802c2'')) or(sdata(queryid = ''a3b69f62-560b-4883-8bd8-d8225af075b4'')) or(sdata(queryid = ''8596dc3e-c062-4527-9df6-e2c6aa10187d'')) or(sdata(queryid = ''5ce0dea4-b005-4185-9a05-7e91f14c7a8a'')) or(sdata(queryid = ''27eb925f-6f0c-4e27-9b57-91d78de703df'')) or(sdata(queryid = ''53b63124-caf4-4e71-ac5b-0e323d2805cb'')) or(sdata(queryid = ''f3dea938-a547-4510-8c24-25e04fa11ec4'')) or(sdata(queryid = ''5d8ebe7d-224b-4731-a1f2-ef1e3b409579'')) or(sdata(queryid = ''69c8dc53-031a-4069-a9e5-89f28cb7a7e0'')) or(sdata(queryid = ''2f65dc5e-63f6-4904-95f8-94c8983931a9'')) or(sdata(queryid = ''9ce16005-5b3b-4691-a624-5a7835e9e982''))) ';
variable querystring3 varchar2(4000);
exec :querystring3 := '((sdata(queryid = ''a51f216a-b211-4b59-89d4-6fcce58a8517'')) or (sdata(queryid = ''d1c975a6-607d-4334-a84c-cc63f68bda3a'')) or(sdata(queryid = ''11fd0d2a-540d-4de0-852a-75f1b841b262'')) or(sdata(queryid = ''0dbfd826-497e-4283-8fc6-210c631c4a3e'')) or(sdata(queryid = ''eb2fd3d3-3b14-4092-a373-edd5448802c2'')) or(sdata(queryid = ''a3b69f62-560b-4883-8bd8-d8225af075b4'')) or(sdata(queryid = ''8596dc3e-c062-4527-9df6-e2c6aa10187d'')) or(sdata(queryid = ''5ce0dea4-b005-4185-9a05-7e91f14c7a8a'')) or(sdata(queryid = ''27eb925f-6f0c-4e27-9b57-91d78de703df'')) or(sdata(queryid = ''53b63124-caf4-4e71-ac5b-0e323d2805cb'')) or(sdata(queryid = ''f3dea938-a547-4510-8c24-25e04fa11ec4'')) or(sdata(queryid = ''5d8ebe7d-224b-4731-a1f2-ef1e3b409579'')) or(sdata(queryid = ''69c8dc53-031a-4069-a9e5-89f28cb7a7e0'')) or(sdata(queryid = ''2f65dc5e-63f6-4904-95f8-94c8983931a9'')) or(sdata(queryid = ''9ce16005-5b3b-4691-a624-5a7835e9e982''))) ';
     select indexedmetatext from ContentStore where rowid in ( select oraclerowid from ( select rowid as oraclerowid from ContentStore where contains(indexedmetatext,:querystring1|| ' or ' ||:querystring2|| ' or ' ||:querystring3) > 0 order by istimestamp desc ) where rownum <= 250);
/* 4.We used bind variable of type clob but giving error
Error:
ORA-29902: error in executing ODCIIndexStart() routine
     ORA-20000: Oracle Text error:
     DRG-50857: oracle error in drexrstart_clob
variable querystring CLOB;
exec :querystring := '((sdata(queryid = ''a51f216a-b211-4b59-89d4-6fcce58a8517'')) or (sdata(queryid = ''d1c975a6-607d-4334-a84c-cc63f68bda3a'')) or(sdata(queryid = ''11fd0d2a-540d-4de0-852a-75f1b841b262'')) or(sdata(queryid = ''0dbfd826-497e-4283-8fc6-210c631c4a3e'')) or(sdata(queryid = ''eb2fd3d3-3b14-4092-a373-edd5448802c2'')) or(sdata(queryid = ''a3b69f62-560b-4883-8bd8-d8225af075b4'')) or(sdata(queryid = ''8596dc3e-c062-4527-9df6-e2c6aa10187d'')) or(sdata(queryid = ''5ce0dea4-b005-4185-9a05-7e91f14c7a8a'')) or(sdata(queryid = ''27eb925f-6f0c-4e27-9b57-91d78de703df'')) or(sdata(queryid = ''53b63124-caf4-4e71-ac5b-0e323d2805cb'')) or(sdata(queryid = ''f3dea938-a547-4510-8c24-25e04fa11ec4'')) or(sdata(queryid = ''5d8ebe7d-224b-4731-a1f2-ef1e3b409579'')) or(sdata(queryid = ''69c8dc53-031a-4069-a9e5-89f28cb7a7e0'')) or(sdata(queryid = ''2f65dc5e-63f6-4904-95f8-94c8983931a9'')) or(sdata(queryid = ''9ce16005-5b3b-4691-a624-5a7835e9e982''))) ';
select indexedmetatext from ContentStore where rowid in ( select oraclerowid from ( select rowid as oraclerowid from ContentStore where contains(indexedmetatext,:querystring) > 0 order by istimestamp desc ) where rownum <= 250);
/* 5.I read from article
http://www.oracle.com/technology/products/text/pdf/ot11g_new_features.pdf
That we don’t need to modified query as we had to do with SDATA(as we are doing in above examples) and optimizer will realize that query can be satisfied by the text index and will “push down” the filtering of rows into the text index processor rather than doing table access for filtering on sdata column but when I tried to write that query it was doing table access to filter for filter by column.
/* 6.My Questions:
a.     Is it possible as mentioned in above point(point number 5) that we don’t need to write SDATA query in contains clause and optimizer will use composite index automatically.
b.     Is there any workaround for using string literal > 4000 char in contains clause.
c.     Why performance degrades lineally when using multiple contains clause.
d.     Can we use in clause in SDATA and write query like this:
i.     SDATA(queryid in ( 'q1',’q2’))
*/

SQE is really breakthrough for me but I dont know why it is not working in my case.I tried it onOracle 11g installaion with window and Linux both but did not get success.
Please suggest me what I need to check when Installing if it is installation problem?
My attempt:
[oracle@oracle2 ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Mon Jul 6 12:21:32 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> create user test identified by test;
User created.
SQL> grant connect,dba,resource,ctxapp to test;
Grant succeeded.
SQL> connect test/test@content;
Connected.
SQL> create table test (text varchar2(2000));
Table created.
SQL> insert into test values ('hello world');
1 row created.
SQL> create index testindex on test(text) indextype is ctxsys.context;
Index created.
SQL> exec ctx_query.store_sqe('testsqe', 'hello')
PL/SQL procedure successfully completed.
SQL> select * from test where contains (text, 'sqe(testsqe)') > 0;
select * from test where contains (text, 'sqe(testsqe)') > 0
ERROR at line 1:
ORA-29902: error in executing ODCIIndexStart() routine
ORA-20000: Oracle Text error:
DRG-00100: internal error, arguments : [50935],[drpn.c],[1051],[],[]
ORA-01403: no data found
SQL> select * from test where contains (text, 'ctx_query.sqe(testsqe)') > 0;
no rows selected
SQL>

Error while starting managed services on local BIP server

When I am trying to starting managed services on local BIP server then
[aanshulg@indl60109 bin]$ /usr/bin/perl opmnctl startall
opmnctl startall: starting opmn and all managed processes...
================================================================================
opmn id=indl60109:9601
Response: 4 of 5 processes started.
ias-instance id=bi_instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication_obips1/
Error
--> Process (index=1,uid=1757041790,pid=5845)
failed to start a managed process after the maximum retry limit
Log:
/home/aanshulg/BIPDomain/instances/instance1/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1/console~coreapplication_obips1~1.log
[aanshulg@indl60109 bin]$ /usr/bin/perl opmnctl status\
[aanshulg@indl60109 bin]$ /usr/bin/perl opmnctl status
Processes in Instance: bi_instance1
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
coreapplication_obiccs1          | OracleBIClusterCo~ |    5654 | Alive
coreapplication_obisch1          | OracleBIScheduler~ |    5656 | Alive
coreapplication_obijh1           | OracleBIJavaHostC~ |    5655 | Alive
coreapplication_obips1           | OracleBIPresentat~ |     N/A | Down
coreapplication_obis1            | OracleBIServerCom~ |    5652 | Alive
===========================================================================
In log file   console~coreapplication_obips1~1.log
/scratch/software/mw_local/FMWTOOLS_11.1.1.7.0_GENERIC_130327.1838.3_PATCHES4FA_11.1.8.0.0_PLATFORMS_JDK64/aanshulg/mw_home_standalone/bi/bifoundation/web/bin/sawserver: error while loading shared libraries: /scratch/software/mw_local/FMWTOOLS_11.1.1.7.0_GENERIC_130327.1838.3_PATCHES4FA_11.1.8.0.0_PLATFORMS_JDK64/aanshulg/mw_home_standalone/bi/bifoundation/server/bin/libperfapi64.so: unsupported version 24168 of Verneed record
Because of this issue when I am trying to connect the BIP server
I am getting this error
Error
Server not initialized. Please make sure the repository is ready.
Can any body help me in this issue
Thanks in Advance
Best Regards
Anshul

I could see calling to setDomainEnv.cmd script:
*@REM Call setDomainEnv here.*
set DOMAIN_HOME=D:\Perforce\weblogic1\dev\src_crmod\wls\mytest
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
set SAVE_CLASSPATH=%CLASSPATH%
But in my environment I do not see these variable set to any, JAVA_HOME, DERBY_CLASSPATH, JAVA_OPTIONS, CLASS_PATH.
This might be the issue? Or anything else?

Oracle BI Publisher 11g Enterprise

Kelly, I believe you said in another thread "Your PLM4P license includes a free limited use license for BI Publisher".
So, we can download Oracle BI Publisher 11g Enterprise and hook it up to PLM4P for free?
And what is meant when you say 'limited use"?
Thanks,
Trey

That's correct, PLM4P includes a limited use license for BI Publisher. The limited use means you can only use it to report from the core PLM4P database, once you need it for different data you will need to purchase licenses. You can reach out to your sales rep for the exact license verbiage and restrictions. We offer out of the box reports in the extensibility pack, instructions and details can be found in the EP 3.5 report guide.

Create a second instance by DBCA

I have a simple RHEL3 box with 1 G memory, I had used the DBCA to install a database, 10g r2, on it. How can I use the DBCA to create a second instance on the same DB? Someone´s thread said it can, But when I run the dbca, there is no place I can pick to create second instance, all I have is to create another database and next. My oracle was 10g r2 (10.2.0.1) SE1 version downloaded from Oracle. Is a problem with my original download copy or setup of the dbca? Thx.
Chi

Thanks Kuljeet. I think I missed that part of fundamentals. So how about the second schema vs second instance? Some users said that the second instance will need more overhead for oracle structure. and many experienced users said that second schema on the same instance is bad idea. The reason I want is to separate the test part of the database operation to a second environment (not sure it is a good word). So the management of Oracle will be simpler. My 10g r2 is part of BAAN erp application, BAAN uses Oracle as a data/index storage only, Most of the processes is around running SELECT, UPDATE and INSERT sql (developed from BAAN´s 4G script). No procedure, no function, no trigger or any other involved. However, during the set-up of the BAAN, contractor created a test set of database, then repeated the data/index tables to a prod set. So that our BAAN users can test some processes and move that processes to prod.

Creating second instance 10g (non rac)

We are 10G 64bit on a Windows/VM box - or will be:)
Is it possible to create multiple instances of oracle on a single server?
Generally speaking - would I create the second instance just like the first instance but with a different db name?
Any reasons why I wouldn't want to create multiple database instances on the same server?
Currently we have our client (enterprise manager) installed on a separate box and use the same client to connect to several databases. If I had multiple instances on one server how would enterprise manager connect to multiple instances with the same ip?
Thanks for taking my question!.
Kathie

When running the second DBCA the global database name and sid would be unique as well?Yea, the global database name must be unique.
I could also use the same flashback directory as this area has the sid in the directory path? Yea, you can use the same flashback directory for any database on the same server.
Forum question: Is there a way to close a question and give credit for an answer? I dont, know, but the interesting about the participation on this forum is HELP
Luck.
Have a good day.
Regards.

BIP 11g Enterprise - Need second instance of bip server

Similar Messages

Maybe you are looking for