BIP in 2004s

Hello all,
Can some tell me if there is any developers guide or some documentation of that sort for BIP which is deleivered in 2004s.
The Planning modeler and wizard gives error on portal, is there any special setting on backend that we need to do ?
Last thing, I am trying to install a global planning sequence (FMFCSQ), but i dont get where to install from. I know there were some notes for this in previous version. Can someone help me in that.
Thanks in advance,
Kiran

hi, Prakash.
Sorry for take you time, we really need little help here.
We have new install the BI7 using AS-JAVA, AS-ABAP, BI-JAVA, SLD and EPC, i think EP is intalled too.
I not have the BASIS Skills, then what i need asking to BASIS for initial the customizing and activate the BI7 Web area using EP ?
I know EP is installed in cross-client 001, but my BI7 DEV is in cross-client 100 (I not can connecto BI dev to R/3 cross-client 300, only cross-client 100).
So, BI7 is AIX, how i can launch the Java Visual Admin ?
We have BI7 in SP11 and AS-JAVA in SP9, soon upgrade BI7 to SP14.
I need use Report RSPOR_SETUP and Template Installer or only one is used ?
SAP_BEX is dialog user ?
When i run the Template installer in Step1 :
Create RFC Destinations in ABAP
Have error :
Element 'SAPConfigLib.DES.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
I not setting none in JAVA Visual Admin, SAP_BEX user is for use in Jco RFC Provider ?
I create Logon Group Public in ABAP BI7, is necesary for Template Installer ?
What value is recomended for var CPIC_MAX_CONV ?
What is the utility the Usage Type Process Integration (PI) ?
Is necessary for the BI7 ?
Sorry, and thank you for you time.
We really need help and more details in the Pre-requisites.

Similar Messages

Logon group not found when launching planning workbench

When I start planning workbench in RSPLAN, the following error appears:
Connect to message server host failed Connect_PM TYPE=B MSHOST=bwdev.shdl.com GROUP=PUBLIC R3NAME=BWD MSSERV=sapmsBWD PCS=1 ERROR Group PUBLIC not found TIME Mon Sep 25 13:13:13 2006 RELEASE 700 COMPONENT LG VERSION 5 RC -6 MODULE lgxx.c LINE 4288 DETAIL LgIGroupX COUNTER 1
We filled group "PUBLIC" for template installer and it went through with all green lights including BI IP required 4 JCO desitinations.
but after having a look at the following threads Re: BIP in 2004s, I notice the following sentence: "3. Logon Group - Make sure logon group is specified in ABAP system (SMLG)", when I go to SMLG, only one record with empty logon group exists, but the status is green.
Shall I maintain anything in SMLG? create "public" group in SMLG?
need suggestion...
Patrick

Hi Gregor
I have already followed points with 919850, and our basis already setup SLD (for bw system in SLD, he setup two logon group: SPACE(default) and PUBLIC).
After I maintain logon group "PUBLIC" in SMLG, and then re-execute the step 14 (maintain 4 BI IP JCO destinations), 4 JCO destination appears with green lights again afterwards.
However, now the internl error 500 appears in the web.
any more suggestion?
Patrick

BIP Report in Siebel mobile is not working in languages other than English

Hi,
We have upgraded our Siebel from 7.8 to Siebel 8.1 and in that we have moved from Actuate to BIP Reports. We have created a customized report in which we have put in the Filters on '.rtf' file to show a particular set of data. This report is deployed for 3 languages : English (ENU), Portuguese (PTB) and Spanish (ESN).After deploying this report, on Web application, it is working fine for all the languages but we are facing an issue on mobile client, the report is only working fine in ENU but for other languages(PTB & ESN) it is failing (means the filter which we put on '.rtf' is not working on other languages).
Is anybody face this issue and what will be the solution for this?

Hi
I think you need to first translate the smartform into other languages. Before translation, it wont work.
Steps for translation:
1. goto Transaction SE63
2. in R3 Enterprise select form menu
Translation - ABAP Objects - Other long texts
3. select FS - SSF-Smart Form
4. Object Name: choose your smart form
5. select target language
6. press edit
Regards,
Vishwa.

What is new in Broadcaster 2004s

Anyone have a simple overview with some details why we should change from reporting agent to Broadcaster (we are on 3.5.3

Reporting Agent will be only supported in the 3.X runtime in 2004s.
All the new functionalities like Bursting, PDF etc will be implemented in Broadcaster only.
See attached documentation for new functionalities in Broadcaster.
https://websmp203.sap-ag.de/~sapdownload/011000358700004219392005E/ERQA_INFOBROADCASTING.PDF

I need to buy an External Portable HD 500GB for my iMac OSX 10.4.11 (PowerPc 2004). Can anybody please tell me a few Names/Products that are compatible? Please if you can, just tell me some product name, instead what generical characteristics it needs :s

Hello
I have been reading forums and forums and after days of research l gave up.
Unfortunately it seems that nobody has provided a name of a brand yet.
Although the effort is very admirable, l am still at the point of finding myself back at square one, with an unanswered question:
Which portable external HD 500GB should l purchase for my iMac 10.4.11 (Power PC 2004)?
I know there are many different ones, but l hope at least somebody can suggest one.
A clear Name of a Product that matches the compatibility.
I am not an expert of computer and so all the theoretical explanations of technical characteristics mean next to nothing to me :(
I hope that someone kind enough to halo me out with this will be able to let me know.
My most greatefull thank you to you all in advance :)
And1001

Try http://eshop.macsales.com/shop/hard-drives/External-Enclosures/
If you have question about any items on their page, MacSales has an extremely god technical support staff.
Allan

I need to load an InfoCube from an InfoSet - Is this possible in 2004s?

Greetings,
This question looks long, but it's really not. I'm just trying to give a lot of detail about the screens that I am seeing. Anyway, here goes:
I am in 2004s. I want to load an InfoCube from an InfoSet. I know that an InfoSet is just a view and does not physically store data, but recent documentation published by SAP seems to indicate that this is
possible in 2004s (There is a document called "Developer Guide - 2004s" that says the following:
"InfoSets are an additional, easily manageable data source for generic data extraction. They allow you to use logical databases of all SAP applications, table
joins, and further datasets as data sources for BI". )
So... that led me to believe an InfoSet could load an InfoCube. In other words, the InfoSet would be the source and the InfoCube would be the target. I am in RSA1, and I right-click on the cube that I want to be the target. I select the "Create Transformation" option from the context menu. In the "Create Transformation" screen that pops up, I enter "InfoCube" in the target object type field and the name of the InfoCube in the target name field. I enter "InfoSet" in the source object type field and the name of the InfoSet in the source name field.
I get a pop-up that says "Cannot generate proposal". I click the green arrow, and then I get an error message
that says "Transformation does not exist (see long text)".
When I click on the error message, I get the following information in the Performance Assistant:
"Transformation does not exist (see long text)
Message no. RSTRAN010
Diagnosis
The transformation specified by transformation ID , source and target , does not exist.
System Response
The system terminates processing."
Any help would be much appreciated! It seems like it must be possible to use an InfoSet as a source in a data load, or else it would not be an option in the "Create Transformation" screen. ????
I've also tried right-clicking on the cube and selecting "Create Data Transfer Process". I enter the same information on this screen: the types and names of the source and target. Then I get a pop-up that says "Source and target have not been linked with a transformationDo you want to generate a default transformation?". There are two buttons I can click: one labeled "Yes" and one labeled "Abbrechen". I choose "Yes", because I have no idea what "Abbrechen" means.
Then I get the same pop-up from before: "Cannot generate proposal". I hit the green arrow, and I'm back in the
"Create Data Transfer Process" screen. So... I'm stuck in an infinite loop of screens that I can't get out of.
If someone could help, I would be grateful! THANK YOU VERY MUCH!

Thank you so much, Ram! I REALLY APPRECIATE YOUR HELP!
I am wondering if it possible to manually create a node in RSA6 for the InfoSet. I tried it by doing the following:
I went to RSA6 and clicked on the white icon for "Create Node". I then entered the number "8", followed by the name of the InfoSet. (I entered an "8", because all our DataSources seem to start with an "8". I'm not sure why.)
The DataSource now shows up, but when I double-click on it, nothing happens. When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
Also, do you know where I can get my hands on the white paper?
Thanks again!
Regards,
Sarah-Jane

Can I restore Office 2004 from Time machine backup

Hi Guys,
I have managed to delete office 2004 when I was trying to install office 2008 using a friend's copy. Office 2008 will not work for me as it needs online registration.
I no longer have the office 2004 install disk. Is it possible to re-install office 2004 from my time machine backup. I can see it is available in the backup from before yesterday but not sure if I try to restore what will happen.
Any advice appreciated.
Thanks,
Paul

Hi PaulieHK,
Open Finder on you original view desktop.
No go to Application folder and select the Office 2004.
NOW, select the Time Machine icon in the dock and it will bring you back in history.
You can go back before you tried to install Office 2008.
Select IN Time Machine the application Office 2004 and click on PUT BACK.
Time machine will now put back the situation as it was before the installing Office 2008.
When you see your original desktop again try to open Office 2004.
Good luck ...
Dimaxum

Dreamweaver MX 2004 - "An Unidentifed Error has occorred." - Please help!!

Hi folks. I have scoured the internet for a fix to this problem. Most of the posts I read are unanswered or the solution does not work. I am hoping a guru reads mine and has the magic answer - I am ready to chuck the project altogether if I can't find a solution. Although I am not a newbie to simple page design, I have never really tackled data access (dynamic content) before, like I am about to. I am ready and willing to learn but this obstacle may hinder my interest if it is going to be this big a pain in the keester.
Let's start with my system config:
Windows XP Pro w/ SP3
Dreamweaver MX 2004
IIS 5.1 - configured with FTP support
PHP 5.2.11
MySQL 5.0 - For now I am using the Test DB that comes with MySQL. Using "root" account.
I have verified that all is running properly to the best of my knowledge. Certainly Dreamweaver up until this issue has worked for years. I have not used DW for data access before on this machine but have successfully on others.
IIS > Loads web content from http://localhost just fine. Including PHP test page. And IIS help stuff that comes pre-installed.
MySQL > I can build DB's and Schemas just fine. I can even import data from external sources so I have to assume it's running fine.
Dreamweaver > The site I am building has the following config:
Local Info
Site Name: medimj
Local Root: C:\medimj *set to refresh
Images: C:\medimj\images
HTTP: blank
Remote Info
Access: Local/Network
Remote Folder: C:\inetpub\wwwroot\medimj\ *set to refresh auto
Testing Server
Server Model: PHP MySQL
This site contains: Dreamweaver MX Pages Only (default)
Access: Local/Network
Testing Server Folder: C:\indetpub\wwwroot\medimj\ *set to refresh auto
URL Prefix: http://localhost/medimj
<<<Everything else I believe is irrelevant to the topic and left to defaults>>>
SO HERE IS WHAT IS HAPPENING:
When I go to make a data connection (Step 4 under the Database tab of Applications section in DW), I click the "+" button and select "MySQL Connection". The dialogue window appears and I input:
Connection Name: medimj
MySql Server: localhost
User Name: root
Password: <password>
I click "Select" button and get an error window that says "An Unidentified error has occurred." and I am taken back to the MySQL Connection dialogue box. I have tried adding http:, slashes, \medimj, IP address, and pipe name to the Server name to make the connection and none of it works. If I put a DB name and click "ok" the binding will appear but no table ever come into view. If I click on "Test" I get the same error.
Here is the mysql area of the test.php. From what I see, I should be able to make a connection; but I'm not expert. Should I be seeing more information?:
mysql
MySQL Support
enabled
Active Persistent Links
0
Active Links
0
Client API version
5.0.51a
Directive
Local Value
Master Value
mysql.allow_persistent
On
On
mysql.connect_timeout
60
60
mysql.default_host
localhost
localhost
mysql.default_password
no value
no value
mysql.default_port
3306
3306
mysql.default_socket
no value
no value
mysql.default_user
no value
no value
mysql.max_links
Unlimited
Unlimited
mysql.max_persistent
Unlimited
Unlimited
mysql.trace_mode
Off
Off
I just don't see what's wrong at this point. I really hope somebody here can help.
I've been at this for 4 days and uninstalled and reinstalled everything to no avail. I hope I have given enough information for someone to make a suggestion that will help. I thank anyone for their time in advance.
prdreamweaver

I would like to share with everyone a fix for this problem. I wish I could say I found it here but I did not. After continuing to search the Internet, while eagerly awaiting an answer here, I stumbled upon the answer deep in a thread in the MySQL website forums.
If someone should find this topic before the supposed Adobe fix, please do not waste your time with what Adobe suggests. It has been know cause more problems than help - as was the case with me. Applying their "fix" forced me to reinstall MySQL and a fresh version of PHP. I am also providing OS information and versions of all components I am using as well as settings within Dreamweaver. I cannot speak as to whether this fix transitions across other versions of Dreamweaver but it's worth looking at if yours does not match mine.
NOTE: ALWAYS MAKE A RECORD OF WHAT YOU CHANGE. THIS IS BASIC TROUBLESHOOTING AND WILL MINIMIZE THE NEED TO REINSTALL IF THINGS GET WORSE. BEING ABLE TO REVERSE WHAT YOU'VE CHANGED IS IMPORTANT.
System Info
OS: Windows XP Pro w/ SP3 (patched to the hilt)
IIS: 5.1 (installed from XP Pro CD - additional windows components)
PHP: v5.2.11 (installer version)
MySQL: v5.0.87 (installer version)
Dreamweaver: MX 2004
Install IIS, PHP, and MySQL per their individual instructions.
IIS Tweaks
Note: This tweak assumes you haven't already created your website virtual directory under IIS. If you have, you can delete it and follow these steps. You don't have to but I like this recommendation I found on another site as it tricks DW into thinking its attaching to an "outside" server. You'll see what I mean when you see the DW confg options later in this topic.
1. Create a folder under c:\inetpub\wwwroot that matches the local folder in DW for the site you are designing. Make sure they are spelled the same. If you have pages and images already in your local folder for DW, you don't have to re-create them here. You can sync them to the "server" much like you would when you FTP your pages up to a live server. Just make sure the root folders are named the same.
2. Right click your localhost site select "properties". Click the "Home Directory" tab. Click on the "Configuration" button. Under "Application Mappings", click the "Add" button. A new dialogue box appears > In the "Executable" area, browse to the root PHP folder and select file "php5isapi.dll" and click ok to return to the dialogue box. In the "Extension" box type ".php" without the quotes. Make sure "Script Engine" and "Check that file exists" are checked. Click ok.
NOTE: A DIALOGUE BOX MAY APPEAR ASKING IF YOU WANT TO PROPOGATE THE CHANGES ACROSS ALL OTHER SITES. YOU CAN SAY YES BUT IT DOESN'T ALWAYS WORK. (IT'S AN IIS THING) TO SEE IF IT DID, CHECK THE PROPERTIES OF YOUR VIRTUAL DIRECTORY AND FOLLOW STEP TWO IF YOU DON'T SEE THE PHP MAPPING THERE.
PHP Tweaks
1. extension_dir = c:\php\ext ~ change folder to match your install
2. cgi.force_redirect = 0 ~ required for IIS
3. register_globals = On
4. register_long_arrays = On
5. extension=php_mysql.dll ~ removed the ;
6. extension=php_mysqli.dll ~ removed the ;
7. include_path = "."
8. mysql.default_host = localhost
9. mysql.default_port = 3306
**NOTE: IF I DIDN'T PUT QUOTES - NEITHER SHOULD YOU.
10. Save and Close
copy the file libmysql.dll
to c:\windows & c:\windows\system32 ~ this file is in the root of PHP 5 folder
XP Environment Variables: Add the following at the end of Paths> c:\<php folder>;c:\<php folder>\ext ~ change php folder for your install
NOTE: ANY CHANGES TO ENVIRONMENT VARIABLES HAS THE POTENTIAL TO CAUSE SYSTEM PROBLEMS IF NOT DONE CORRECTLY. MAKE SURE YOU HAVE A ";" AT THE END OF THE PATH BEFORE YOU ADD THE CHANGES.
REBOOT!!!! THESE CHANGES WILL NOT TAKE EFFECT UNTIL YOU DO SO.
DW - edit current site or create it new
Local Info:
Should be left however you have it now OR if creating new, just do it like you always have.
Remote Info:
Access : Local/Network
Remote Folder: C:\inetpub\wwwroot\<your virtual directory>
* Check Refresh Automatically
Testing Server:
Server Model: PHP MySQL
Access: Local/ Network
Testing Server Folder: C:\inetpub\wwwroot\<your virtual directory>
URL Prefix: http://localhost/<your site name>
* Check Refresh Automatically
** I don't make changes to anything else under site editing so I stop there. Click OK and you're done.
At this point, you should see under the "Application" section on the "Database" tab, steps 1,2,3 checked. Now create a connection by clicking the "+" button. Enter the following:
Connection Name: <whatever you want>
MySQL Server: localhost
User Name: root (or another account you have created with sufficient privileges)
Password:
Database: enter a DB name you wish to connect to or click select if you wish to browse for it.
You shouldn't get the "Unidentified Error..." message anymore. I know I don't.
I hope this helps the next poor sap this happens to. I'm sorry for the long post but I hate, hate, hate, when people post half assed instructions because they are too lazy to type.
Good luck everyone and happy designing!!!
prdreamweaver
email: [email protected]
(you can email me with questions but remember, I am not an expert with dynamic content. however, I am willing to assist if I can)

SAP NetWeaver 2004s SR 1 SP9 INSTALL

I spent last week trying to install SAP Netweaver 2004s SR 1 SP9 in XP SP2 with no success.
The JDK version is 1.4.2_09 and the install process fail in step "Import Java Dump", the sapinst.log indicates the error:
14-dic-2007 11:55:30 com.sap.inst.jload.Jload dbImport
GRAVE: DB Error during import of J2EE_CONFIGENTRY
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: Message: Cannot assign NULL to host variable 2. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO J2EE_CONFIGENTRY( CID , NAMEHASH , ISFILE , NAME , DTYPE , VBIGINT , VDOUBLE , VSTR , VBYTES , FBLOB ) VALUES ( ? , ? , ? , ? , ? , ? , ? , ? , ? , ? )".
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: SQLState: SAP06
14-dic-2007 11:55:30 com.sap.inst.jload.Jload printSQLException
GRAVE: ErrorCode: 1001142
14-dic-2007 11:55:31 com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
ERROR 2007-12-14 11:55:31
CJS-30049 Execution of JLoad tool 'C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:\Archivos de programa\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\install\sltools\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib/iaik_jce.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/jload.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/antlr.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/exception.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/jddi.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/logging.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/offlineconfiguration.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/opensqlsta.jar;C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sltools/sharedlib/tc_sec_secstorefs.jar;C:\sapdb\programs\runtime\jar\sapdbc.jar" -sec J2E,jdbc/pool/J2E,
MX3506DC0976/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
MX3506DC0976/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir C:/Programas/SAPNW2004sJavaSP9_Trial/SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\../Sneak_Preview_Content\JAVA\JDMP -job "C:\Archivos de programa\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\IMPORT.XML" -log jload.log' aborts with return code 1. SOLUTION: Check 'jload.log' and 'C:/Archivos de programa/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/jload.java.log' for more information.
ERROR 2007-12-14 11:55:31
FCO-00011 The step importJavaDump with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
INFO 2007-12-14 11:55:38
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump".
I have read many posts in many forums and there are some posts about the same problem of the table J2EE_CONFIGENTRY, but never clear answers (or answers for Linux OS). I really appreciate any help about it.
PD: No, it's not the timezone configuration (I have GMT+1 and daylight saving enabled).

Hi Friends!
This is Anand Here
I am totally new to SAP
I was trying to install SAP on 2003Server
while installing the ABAP System-Central Instance
I Got this error message
An error occurred during the installation of component SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation. Press the log View Button to get extended error information or press OK to terminate the installation. Log Files are written to SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation
The following error occured and the installation could not proceed
ERROR 2007-12-27 20:33:33
- FSL-00001 System Call Failed. Error 5 (Access is denied.) in execution of system call 'FindFirstVolumeMountPoint' with parameter (
?\Volume{c682cb5b-b31d-11dc-be09-806e6f6e6963}\), line (77) in file (synxcfsmit.cpp).
ERROR 2007-12-27 20:33:33
MOS-01235 Module function getInfo of module CIa0sMount Failed,
Can Somebody help me with this

Cannot deploy with NWDS 2004s SP9

Hi all,
I just recently upgraded to NWDS 2004s SP9 from 2004 SP14. Each time I attempt to deploy and run a WebDynpro project (one of my older projects), I get the following error:
Application error occurred during request processing:
Details: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >: (:main:, row:1, col:493) The ID of this error is Exception id: [00059A3C7800004800000200000093000041F13A6E7E3A9].
I've found the threads and oss note that tell me to re-deploy sap.com/cafeugpuidtcompcons, (etc) but I when I look for that particular DC, its not there.
Any suggestions?

No need to apologize, we've all been in that situation before.
The logs can be found under:
\usr\sap\<SID>\JCXX\j2ee\cluster\server0\log
Generally defaultTrace.trc will contain this sort of thing. Normally it's best to read these with a log viewer of some kind, either the standalone log viewer or the one integrated into Visual Administrator. You can also just open the logs in a text editor, but they are hard to read and the timestamps aren't human-readable.
If you search for the ID of the exception, you may find some more info there that will help track down what the problem is. Or perhaps someone else has seen this problem before and will speak up.

Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s

Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

Is it posible to compare 2 variales in single if statement in BIP report?

Hi,
I want to know following things reg BI Publisher-
1. Is it possible to compare 2 variables in single if statement in BI Publisher report as follows-
<?if: xdoxslt:get_variable($_XDOCTX,'RVal1') = xdoxslt:get_variable($_XDOCTX,'RVal2')?>
2. Is it possible to compare 1 variable with 1 xml tag in single if statement in BI Publisher report?
eg - <?if: ObjId = xdoxslt:get_variable($_XDOCTX,'RVal2')?>
We are having 2groups QuoteItem and QuoteItemXA. QuoteItem is a parent group and QuoteItemXA is a child group of QuoteItem. We want to compare value of field QuoteItemId from QuoteItem group with value of field ObjId from QuoteItemXA group in inner for loop(QuoteItemXA for loop).
We want to display values of one field only when values of these two fields matches. Hence we are taking 1 variable for QuoteItemId and comparing it as follows -
<?if: ObjId = xdoxslt:get_variable($_XDOCTX,'RVal2')?>
The RVal2 variable is already initialized and assigned value of QuoteItemId in outer for loop.
But above for loop is not filtering out any data.
When we tried giving hardcoded values as -
<?if: ObjId = '1-151QGPO' and xdoxslt:get_variable($_XDOCTX,'RVal2') = '1-151QGPO'?> then its showing report only for this QuoteItemId.
Please suggest us the solution- how to compare above two fields?
Regards,
Rakesh

hello Rakesh,
Were you able to fix this issue ?
We have a BIP report on the Quote , Line Item and XA entities and we have the same issue with duplication of attributes due to use of Hierarchy parent lKey. I am assuming you would be having the same issue as well; as a result of which XA.ObjId is compared with QLineItem.Id

How to create checkboxes in BIP templates?

I am creating BI Publisher Template for use with Siebel. In the datastream, values for boolean fields are passed as Y or N.
However if I place a MS Word checkbox object and give the field as the property, nothing happens at all.
I have tried using conditional sections and Wingdings font to display checked and unchecked icons depending on the value of the flag. But, when report is run in PDF, Wingdings can not be used.
When exposing the field directly, it populates with "Y" or "N". However, we want checkboxes.
Any ideas appreciated.

I have similar issue.
1) I have copied Wingdng2.ttf file to $BIHome/jdk/jre/lib/fonts/ folder.
2) I have created xdo.cfg file and configured to use Wingdings 2;82;163 for checkbox display.
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
<fonts>
<truetype path="c:\windows\fonts\WINGDNG2.ttf"/>
</fonts>
<properties>
<property name="rtf-checkbox-glyph">Wingdings 2;82;163</property>
</properties>
</config>
Problem: The checkbox displays fine under English locale, however it is displayed as Rhombus/Diamond under French locale (when .xlf file is used). I am using BIP 10.1.3.4.2.
Does anyone know how to fix this issue? It looks like the translation of checkbox from english to french is messed up.

Unable to login into BIP using IIS/Oc4j

Hi ,
we have configured SSO in OBIEE using IIS. and to configure oracle proxy for OC4J followed the steps at below url.
http://gerardnico.com/wiki/dat/obiee/iis
But getting the error when trying to browse the ulr
http://localhost/xmlpserver/login.jsp
Error: Internet Explorer cannot display the webpage
any suggestion pls

When I try:
http://localhost:9704/xmlpserver/
it direct me to BIP login page
http://localhost
Under Construction
The site you are trying to view does not currently have a default page. It may be in the process of being upgraded and configured.
Please try this site again later. If you still experience the problem, try contacting the Web site administrator.
If you are the Web site administrator and feel you have received this message in error, please see "Enabling and Disabling Dynamic Content" in IIS Help.
To access IIS Help
Click Start, and then click Run.
In the Open text box, type inetmgr. IIS Manager appears.
From the Help menu, click Help Topics.
Click Internet Information Services.
http://localhost:9704
It direct me to welcome page for OC4J
any help please..
when I try
http://localhost/xmlpserver/login.jsp
get the error please find the log:-
12/06/12 13:36:22: [op_uri_map.c (129)]: Into op_uri_map_t::uri_map_alloc
12/06/12 13:36:22: [op_uri_map.c (163)]: Into op_uri_map_t::uri_map_open
12/06/12 13:36:22: [op_worker_list.c (37)]: op_worker_list_init: propfile=c:\proxy\proxy.conf p=0x010D4A60 l=0x010D24C0
12/06/12 13:36:22: [op_worker_list.c (45)]: op_worker_list_init: numservers=1
12/06/12 13:36:22: [op_worker_list.c (57)]: op_worker_list_init: inside loop, serverlist[0]=ias1
12/06/12 13:36:22: [op_worker_list.c (73)]: op_worker_list_init: hostname=hrlvmdv1281.emea.hays.loc
12/06/12 13:36:22: [op_worker_list.c (82)]: op_worker_list_init: port=9704
12/06/12 13:36:22: [op_worker_list.c (160)]: op_worker_list_init: tablesize=3
12/06/12 13:36:22: [op_worker_list.c (169)]: op_worker_list_init: lookuptable[0]=/xmlpserver/*, servlist[0]=ias1
12/06/12 13:36:22: [op_worker_list.c (169)]: op_worker_list_init: lookuptable[1]=/xmlpserver oproxy.ias1.urlrule=/bioffice/*, servlist[0]=ias1
12/06/12 13:36:22: [op_worker_list.c (169)]: op_worker_list_init: lookuptable[2]=/bioffice, servlist[0]=ias1
12/06/12 13:36:22: [op_uri_map.c (193)]: op_uri_map_t::uri_map_open, rule map size is 3
12/06/12 13:36:22: [op_uri_map.c (266)]: Into op_uri_map_t::uri_map_open, match rule /xmlpserver/=hrlvmdv1281.emea.hays.loc was added
12/06/12 13:36:22: [op_uri_map.c (266)]: Into op_uri_map_t::uri_map_open, match rule /xmlpserver oproxy.ias1.urlrule=/bioffice/=hrlvmdv1281.emea.hays.loc was added
12/06/12 13:36:22: [op_uri_map.c (301)]: Into op_uri_map_t::uri_map_open, exact rule /bioffice=hrlvmdv1281.emea.hays.loc was added
12/06/12 13:36:22: [op_uri_map.c (313)]: Into op_uri_map_t::uri_map_open, there are 3 rules
12/06/12 13:36:22: [op_uri_map.c (340)]: op_uri_map_t::uri_map_open, done
12/06/12 13:36:22: [op_isapi_plugin.c (765)]: initialize_extension, success!
12/06/12 13:36:22: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:22: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:22: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:22: [op_isapi_plugin.c (553)]: HttpFilterProc [] is not a proxy url
12/06/12 13:36:22: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:22: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:22: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:22: [op_isapi_plugin.c (553)]: HttpFilterProc [] is not a proxy url
12/06/12 13:36:22: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase
12/06/12 13:36:22: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase
12/06/12 13:36:23: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:23: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:23: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:23: [op_isapi_plugin.c (553)]: HttpFilterProc [pagerror.gif] is not a proxy url
12/06/12 13:36:23: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:23: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:23: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:23: [op_isapi_plugin.c (553)]: HttpFilterProc [pagerror.gif] is not a proxy url
12/06/12 13:36:23: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase
12/06/12 13:36:23: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase

Session time out in BIP

All,
I have set the BIP security as Oracle BI SERVER and able to successfully log in from dashboards, answers to BIP. but after some time BIP is getting timed out.
where can I set the session time out parameter? and
how to make the BIP session valid as long as OBI presentation services session is valid?
Thanks in advance.

Post Author: amr_foci
CA Forum: Authentication
go to the universe which this report based on, get the parameters window from (File->Paramaters)
check the CONTROL tab
see those parameters and configure them as you want
good luck
Amr

BIP in 2004s

Similar Messages

Maybe you are looking for