BIP report parameters are comming in given sequance.

Hi..
I have report in which i m passing two parameters.
<?param@begin:fromdate?>
<?param@begin:todate?>
While taking report these parameters are not coming in given sequance means i want first para as Fromdate then todate, but every time todate is get displyed first.
I tried by chaging sequace also but the same thing i m getting.

I had to modify slightly the logic in your RTF template and add some values in your XML sample data for this to test.
It is working as expected.
regards
Jorge
p.s If you consider your original question answered then please grant the points and close the thread

Similar Messages

BIP Report Parameters not visible from Dashboard in OBIEE 11.1.1.7.1

Hello All,
After upgrading to the OBIEE 11.1.1.7 we are facing this issue. In the earlier versions of 11g it was working fine.(11.1.1.6)
When BIP reports are placed on dashboard as embedded content or as Link and opened from dashboard the BIP reports are missing the parameters section.where as the same report when opened directly from the catalog we are able to see the parameters.
Is any one facing the same issue? Is there any option to show the parameters from dashboard or its natural behavior of 11.1.1.7 or a bug?
Suggestions are highly appreciated.
Thanks,
V

V
so you are not able to see the parameter before running the report as embeded content or as a link ? do you want to show a link for the report in your dashboard ?
i havent faced this issue YET but i believe that 11.1.1.7 has some issues/bugs with the parameter
i have found a bug which is " dunno if you are facing it as well or not " but wheen you choose all values and apply parameter it just error out, i have opened an SR and after too many OWC they have told me its a bug.
BTW have you applied the latest patch ?

In report value are comming but itz a old one but we required new one

hello expert ,
I am developing a report related to payroll , one field desiznation of employee field value are comming but itz a old one . ie if any employee got promotion , it dosn't showing updated field . i checked pa30 for this employee . there is two designation one is old one and another is new one . so itz pic the value old one
Thanks
Aditya

Hi,
When you are capturing the designation from the table , you should always check for begda and endda in the table , Also if you pick the record where begda = '99991231' then , I think you can able to pickup the latest record having current designation details
Hope this will help you.
Rani

Default values for static report parameters are not visible when scheduling

Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

Hi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick

GO button to execute a query once report parameters are selected.

I am familiar with the GO button depicted in chapter 10 of the 2 Day Developer manual that does not cause the report to be rendered until a user chooses a value from a select list of values. The GO button is used in conjunction with Null Value Text (ex. -Select-), Null Value (ex. -1), and Default (ex.-1).
I need an alternative to the above method that will still force the user to pick a value from the List Of Values parameters prior to executing the query and rendering the report. Please provide.
Thanks, Don From Maine

Why don't you use a validation process?
Denes Kubicek

After installing SP14   all report quantities are come zero or null value

Hi all i have a big problem.
we installed support package 14 in our product systems yesterday and quantity unit conversions didnt work and all quantities which use base unit of conversion come to reports with zero or null value.it was working correct before support package installed.Our system is 2004s and current patch levels updated to
SAP_ABA     700     0014     SAPKA70014
SAP_BASIS     0014     SAPKB70014
PI_BASIS 2005_1_700     0014 SAPKIPYJ7E
SAP_BW     700     0016     SAPKW70016
FINBASIS     600     0010     SAPK-60010INFINBASIS
BI_CONT     703     0002     SAPKIBIIP2
SEM-BW     600     0010     SAPKGS6010
What is the wrong? we want to solve this problem this weekend ? Which OSS must we apply ,i couldn't find any?

Hi,
Why do not you open an OSS message to SAP for your problem ?
Regards.

Link from BIP report to P6RiskModule

A client of mine is running BI Publisher 11g. In BIP they have a report summarizing the risk against a project. This report is displayed in a BIP Dashboard. The client would like a link in the report that would take them directly to the P6RiskModule. The usernames and passwords for BIP and P6 are identical, so ideally the link should log the user into P6 and display the risk details as entered in P6.
Can anyone assist?

if you are on 11.1.1.6 version you can do it i think .
check the link below
http://docs.oracle.com/cd/E25178_01/bi.1111/e22257/whatsnew.htm#CHDCDBCA
Enhancements to Parameter Display Options
Enhancements to parameter display options include:
Support for radio button and check box display of values
Parameters that are defined as a menu in the data model can now be configured to display the menu options as a list of radio buttons or check boxes. Parameters configured to support one value support the option to display as radio buttons. Parameters configured to support multiple values support the option to display as check boxes.
New options for placement of parameters in the report viewer
Previously the report viewer always displayed the parameters in a horizontal region across the top of the viewer. In this release the display of the parameter region can also be configured in one of the following ways:
In a vertical region along the right side of the viewer
As a dialog
As a separate full page
New report viewer action button to show or hide parameters
This release adds an action button to the report viewer to enable users to hide or show the parameter region. This enhancement complements the new parameter display options. When report parameters are configured to display as a dialog or in a separate full page, the parameter display region is dismissed when the viewer displays the report. Use the Parameters button to redisplay the parameter region to make new selections.
Search added to menus
All parameter menus having more than a specified number of options provide a Search option. For more information, see Section 3.3.1.1, "The Parameter Search Dialog."
Option to remove the Apply button
Reports can now be configured to remove the parameter Apply button. In these reports the action of selecting a new parameter value automatically reruns the report.

Link from OBIEE Report to BIP Report

I have a requirement in which I need to Create a Report in OBIEE and the values used in the prompts to execute the report in OBIEE needs to be passed through a link to BIP and Execute BIP report for selcted parameters.
The Report is working fine and I am able to pass the parameters from OBIEE to BIP but to make BIP Report function correctly. I have to apply same set of Parameters in BIP and they are visible in the header of the BIP Report.
Now the Requirement is to hide those parameters from BIP Report and BIP Report should run for the selected parameters from OBIEE dashboard.. On doing this the values passed from OBIEE are not getting filltered in BIP report and BIP Report is running for all records. Is there an alternate way to achieve this?

if you are on 11.1.1.6 version you can do it i think .
check the link below
http://docs.oracle.com/cd/E25178_01/bi.1111/e22257/whatsnew.htm#CHDCDBCA
Enhancements to Parameter Display Options
Enhancements to parameter display options include:
Support for radio button and check box display of values
Parameters that are defined as a menu in the data model can now be configured to display the menu options as a list of radio buttons or check boxes. Parameters configured to support one value support the option to display as radio buttons. Parameters configured to support multiple values support the option to display as check boxes.
New options for placement of parameters in the report viewer
Previously the report viewer always displayed the parameters in a horizontal region across the top of the viewer. In this release the display of the parameter region can also be configured in one of the following ways:
In a vertical region along the right side of the viewer
As a dialog
As a separate full page
New report viewer action button to show or hide parameters
This release adds an action button to the report viewer to enable users to hide or show the parameter region. This enhancement complements the new parameter display options. When report parameters are configured to display as a dialog or in a separate full page, the parameter display region is dismissed when the viewer displays the report. Use the Parameters button to redisplay the parameter region to make new selections.
Search added to menus
All parameter menus having more than a specified number of options provide a Search option. For more information, see Section 3.3.1.1, "The Parameter Search Dialog."
Option to remove the Apply button
Reports can now be configured to remove the parameter Apply button. In these reports the action of selecting a new parameter value automatically reruns the report.

Dashboard prompts for passing parameters to BIP reports

We have BIP reports that we want to display on a dashboard.
These reports are driven by parameters, which we need to display on the dashboard.
From what I understand from the documentation, Dashboard prompts can be used for that with the presentation variable having the same name as the BIP variable.
however, i am not able to get this to work.
Our reports are not using any subject area and are BIP reports based on SQL query data sets.
Our parameter is also based on a SQL query.
Has anyone done this before? Any help will be appreciated.
Thanks
-anupma

Check this
https://blogs.oracle.com/xmlpublisher/entry/running_bip_reports_in_biee_wi

Crystal Report: ERROR - Some parameters are missing values

          mine report it possesses a single parameter ....
          this is the example of like tries of to change the value set up in the report...
          ERROR: Some parameters are missing values
          thanks help...
          EXAMPLE:
          <%@ page import="com.crystaldecisions.report.web.viewer.*"%>
          <%@ page import="com.crystaldecisions.report.htmlrender.*"%>
          <%@ page import="com.crystaldecisions.reports.reportengineinterface.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
          <%@ page import="com.crystaldecisions.common.keycode.*"%>
          <%@ page import="java.util.*"%>
          <%
          try {
          IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
          String report = "report/ReportParametro1.rpt";
          IReportSource reportSource = (IReportSource) rptSrcFactory.createReportSource(report,
          request.getLocale());
          Fields fields = new Fields();
          ParameterField pfield1 = new ParameterField();
          Values vals1 = new Values();
          ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("CICCIA");
          pfieldDV1.setValue("SELECT descrizione, validoDa, validoA FROM tariffari");
          pfieldDV1.setDescription("Query Dinamica....");
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          CrystalReportViewer viewer = new CrystalReportViewer();
          viewer.setReportSource(reportSource);
          // layout
          viewer.setOwnPage(true);
          viewer.setBestFitPage(true);
          viewer.setHasLogo(false);
          viewer.setHasRefreshButton(true);
          // group navigation
          viewer.setHasToggleGroupTreeButton(false);
          viewer.setDisplayGroupTree(false);
          // page navigation:
          viewer.setHasGotoPageButton(false);
          // print/export
          viewer.setHasExportButton(true);
          //viewer.setPrintMode(CrPrintMode.PDF);
          viewer.setPrintMode(CrPrintMode.ACTIVEX);
          viewer.setIgnoreViewStateOnLoad(true);
          viewer.setParameterFields(fields);
          viewer.setEnableParameterPrompt(false);
          viewer.refresh();
          viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),
          out);
          viewer.dispose();
          }catch(Exception e){
          out.println("Errore " + e.getMessage());
          %>


I am facing the same problem. After selecting an export option (PDF/RTF), the same error message is coming up.
          Also, what needs to be done for displaying export option of EXCEL?
          Thanks,
          Farzal

Web Part - Report Viewer - Override Parameters are not saving

When I select the override option and check the one parameter out of the list and click apply, or OK, the Web Part refreshes and resets the parameter list with all the items checked again.

Hi Developer_46038,
i tried this steps in sharepoint 2013 SP1,
·         A report
viewer web part is added to a standard page
·         The parameters are loaded in the web part settings, and the option to
override the default parameter is selected and overridden with the desired value.
·         After pressing OK, the
report loads as expected.
·         After pressing "Stop Editing" on the page, the
report still appears as expected.
·         If the page is reloaded, the
parameters have been removed.
seems the issue reproducible there, i already submit a request for checking, but i cannot make any guarantee regarding the time process.
if should you need urgently, please open a ticket,
http://support.microsoft.com
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Information Given in Report Parameters of COPA Report

Can any please tell what information does the Keyword "Memory Table SP" and "Screen Table B" provide which is given under the Tech Data Tab for Overview of Report Parameters? It will give some information about the data rows.What does that information mean?
Another questions is that I am running a COPA report based on Summarization levels. The data that report is pulling in QA from the Summarization Level does not match with the data in Production for the YTD for that period. Is there some limitation of the QA system to display the data or is it some OSS thing?

Hi,
This community is for discussion on Oracle Business Intelligence Cloud Service. This service is currently not associated with Oracle RightNow Cloud Service.
Thanks,
Pravin

Need help on Date Parameters for BIP Report

Hello,
I need to add a date parameter in my BIP report. I have used a date parameter on a BIP report that has a for-each grouping, but my BIP report RTF template that was converted from Actuate do not have a for-each grouping and I was getting an error when I validate the RTF template. Can someone please help?
Thank you

can u send me template and xml . i will try at my side. email: [email protected]
Some times converted templates won't work straight away. you still need to do manual adjustments to make it work based one the requirement u have.
check this:
http://bipconsulting.blogspot.com/2009/08/actuate-to-bi-publisher-reports.html

Crystal Report "some parameters are missing values" while exporting/printin

I am able to pass parameters from a JSP to a crystal report through CrystalReportViewer and view the report. (I tried doing it using the code provided on this help forum. I was getting a message: "Some Parameters are missing values". I had to add 1 line: pfield1.setReportName(""); for every parameter field. And It worked..)
Now I can see the "Print" and "Export" buttons. But when I try to print or export the report, I get the same message "Some Parameters are missing values".

see posting "parameter driven export to excel" on April 26th

SOAP - PI- R/3 RFC Scenario RFC parameters are not comming

Hi Experts,
I created one scenario as SOAP ->PI 7.1 -> R/3 RFC call.
When I am testing this scenario Backend RFC is getting called but somehow RFC parameters are coming as blank. In XSMB_MONI it is creating two messages as successful one with correct payload. But when I put debug code at the start of RFC , it is going to the debug code and input parameter values are showing as empty. Please tell me where can I check?
Thanks,
Siva Rama

Hi Siva,
Please check in the SXMB_MONI of the receiver SAP System.
If the parameters are getting populated here then it must be passed to the RFC.
Make sure you have imported the RFC from the receiver system itself.
regards,
Piyush

BIP report parameters are comming in given sequance.

Similar Messages

Maybe you are looking for