BIP Report PDF layout not extending to next page

Hi,
I am using BI Publisher Report.
I need to show the data in columns. Ex: Plan Name. Each plan name should be shown in separate column. While doing so, when the paper size is completed, data is not printing in next page.
I need to merge the cells above the Plan Name along with the heading on the first column. But merging is not happening.
But the merging is not happening as expected. Merging is happening as below
Is there any thing which I am missing. Could any one help me in this regard.
Thanks!
Regards,
Kishore Nerella

Hi Vaibhav,
Is there any error displayed for this issue? If you can debug the ASP.NET application in VS, can you try to set breakpoint at the event
protected
void
Application_Error(object
sender,
EventArgs
e)
in Global.asax.cs to see whether the breakpoint would be hit and what kind of error it is when clicking next page.
Thanks,
Wynn

Similar Messages

  • Report Viewer 2015 not navigating to next page

    I am using a report viewer 2015 in an ASP.NET application with credentials passed using IReportServerConnection2. 
    But after clicking next page on report viewer toolbar, 2nd page of report is not shown. 
    The issue is reproducible with
    ASP.NET application installed on Windows Server 2008 R2 but not when installed on Windows 8.1.
    Please help its urgent. 

    Hi Vaibhav,
    Is there any error displayed for this issue? If you can debug the ASP.NET application in VS, can you try to set breakpoint at the event
    protected
    void
    Application_Error(object
    sender,
    EventArgs
    e)
    in Global.asax.cs to see whether the breakpoint would be hit and what kind of error it is when clicking next page.
    Thanks,
    Wynn

  • How to split table in the report so it shows on the next page?

    Hi,
    How to split table in the report so it shows on the next page? Im trying to fit long (many columns) table into my report page. It is too long however. I want it to wrap and show the rest on the next page. What I get now is table cut at the page end and rest is not visible.

    Yes, this might be that the amount of data will cause table to grow and exceed 1, 2, 3.. pages. In that case I would probably want to have, lets say , one half of columns on 1st page then the other on the 2nd page and then repeatedly the same sequence down across all pages. Is there a way to achieve this?

  • I wanna to let the SAP/sys. get know that, Table extended to next page,How?

    Hi Experts,
    Am working with SMARTFORMS.
    I hv a situation in which, my_window shuld trigger, only if the table(entries) r extended to next page.
    I can put a condition for triggering of my_window, like, SFSY-PAGE > 1, but, this idea wuld NOT work in my case/scenario.
    So,
    Is there any other idea, to let the system/SAP to get know that, the table(entries) r extended to next page(so, that I can keep a flag condition, by using that idea)?
    I mean, other than SFSY-PAGE concept!
    thanq.

    if you know how many lines each page then you can set up flag.
    when you pass the data from program to form,use describe command to get number of records for internal table.
    let me say one example :
    each page you have 20 lines ( 20 records),suppose internal table contains more than 20 ,then use flag = 'X'.pass the flag from program to form .
    I guess you could do in form itself.
    Thanks
    Seshu

  • SMARTOFMRS - If Table get extended to next page!!!

    Hi Experts,
    Am working with SMARTFORMS.
    I hv a situation in which, my_window shuld trigger, only if the table(entries) r extended to next page.
    I can put a condition for triggering of my_window, like, SFSY-PAGE > 1, but, this idea wuld NOT work in my case/scenario.
    So,
    Is there any other idea, to let the system/SAP to get know that, the table(entries) r extended to next page(so, that I can keep a flag condition, by using that idea)?
    I mean, other than SFSY-PAGE concept!
    thanq.

    Hi Srikhar,
    You can try SFSY-PAGEBREAK.
    If sfsy-pagebreak = 'X' that means there is a page break.Next page is available.
    if sfsy-pagebreak = 'X' print the window.
    Hope its helpful.
    Regards,
    Nikhil Moghe

  • Box in main window extend to next page in sapscript

    Hi all,
    I am trying to put box in main window in sapscript.
    contents of main window extends  to more than 1 page.
    Box  is appearing on first page but is not extending to other pages.
    Pl help,
    Regards
    Senthil

    Hi,
    Please refer this thread.
    Link: [sapscript box nto printed on all pages;
    Hope this will help you.
    Regards,
    Renuka S.

  • Table row does not flow to next page

    Hi,
    I am using deep structure table in adobe form but the content is not flowing to next page.
    I have wraped the table in subform, Body Page, subform and table all are flowed and allow page breaks with content is also ticked,  still the table row does not flow to next page.
    Regards,
    Kimaya

    Hi Kimaya,
    Just drag the table directly on the body page and execute the form. This should take care of the properties required for data to flow on the form.
    Thanks

  • Internal Table data is not overflowing into Next Page -  Adobeforms

    Hi,
         I have an issue if the internal table consits of more than 20 records that data is not overflowing into next page.
         Here am using Header  only on first page & Table will follows...
    Regards,
    PraVeen..
    Edited by: praveenreddys on Feb 15, 2012 10:51 PM

    Hi praveenreddys ,
    I had the same requirement,  I did as follows:
    LEFT HAND SIDE SELECT "TABLE": check below right hand side properties for this object
    1. table tab: select the check box allow page breaks within content.
    2. pagination tab: place: Following previous
                                after:continue filling parent
                               overflow: none.
    LEFT HAND SIDE SELECT "HEADER": check below right hand side properties for this object
    3. row tab: select the check box allow page breaks within content.
    4. pagination tab: place: Following previous
                                after:continue filling parent
                               overflow: none.
    select the check boxes: Include header row in initial page
                                            include header row in subsequent pages
    Binding tab property:
    5.select check box: Repeat row for each data item
    LEFT HAND SIDE SELECT "ROW": check below right hand side properties for this object
    6. Row tab: DON'T select the chek box allow page breaks with in content
    4. pagination tab: place: Following previous
                                after:continue filling parent
                               overflow: none.
    Binding tab property:
    5.select check box: Repeat row for each data item
    Then test..it would work for you...ALL THE BEST!!!
    If this helps please reward points.
    Reards,
    Naresh.

  • Financial Reporting - PDF has not been configured for this web server.

    When I try a Print Preview of my report, I received this error "PDF has not been configured for this web server".
    As far as I know, this error is confusing because when I look on my log files I found this:
    --- FRLogging.log ---
    [APP: FINANCIALREPORTING#11.1.2.0] The system cannot access the Print Server at this time. Try again later or confirm the print server name.
    [APP: FINANCIALREPORTING#11.1.2.0] Cannot connect to server on xxxHFRCE04.cf.gouv.qc.ca
    [APP: FINANCIALREPORTING#11.1.2.0] Attempt to get an undefined configuration property
    --- FRPrintLogging.log ---
    HyperionReportException: Could not connect to the server.Please make sure that the server is running as specified in the logon dialog (including port number if not default).
    I read a lot of document but it seem to be au communication issues!!!
    Can someone help me with that.

    I believe the supported version for ghost script is 7.0.6; I had the same problem and after installing the lower version it worked like a charm.
    If you cant find the older version let me know, I'll email it to you or place it in my website.

  • Frame line not display in next page of main window

    hi Xpert,
    I am creating layout in SAP SCRIpt,it working fine only the main window of next page  frame line is not display.
    i m define next page as a FIRST page and writing main window of first page following coding
    /:           POSITION XORIGIN '0.50' CM YORIGIN '7.75' CM
    /:           SIZE HEIGHT '17' CM WIDTH '19.25' CM
    /:           BOX  FRAME 10 TW
    when i run the program first page are coming properly and only when i go in second page of output then main window lines not displaying.
    please guide me how to solve this problem.
    Regards,
    pravin

    Hi Praveen,
    In that case why you have to make the main window in the first page and secondry window.
    You can use it as manin window itself. Print the total amount in the main window itself in the first page. and copy that main window to the second page.
    In the first page under the main window create a text. and there u print the total value and text.
    Now copy the main window to the second page..only COPY DONT CREATE NEW.
    In the second page now under the main window create the table to print the line items. What every u add in the second page main window it will come in the first age also in the smartforms. But it will nto get printed in the first page.After the text to print the totals call the COMMAND option and call next page in that.
    Hope you got me..
    Regards
    Ansari

  • List of apps will not go to next page

    I found a small bug, when I am viewing a list of all the apps in a category, I am unable to go to the next page. 
    Such as all the free apps in the Food category (in the iTunes appstore). 
    At the bottom of the page is a next button and numbers of the next pages, when I click on any of those it takes me to the top of the page but does not show any new apps.  I think there is a problem with the javascript used under the hood. 
    I have the latest version of iTunes (10.7) and Lion.
    This is not a huge problem, just trying to report a bug. 

    same bug in OS X 10.8.2 and iTunes 10.7

  • Text field in table not overflowing onto next page!

    Hi,
    I have set up a table with a text field in the first row, added buttons to add and delete rows, set to allow page breaks and made the text field to expand to fit and allow multiple lines. The problem I am having is that if I put a lot of text into the text field it will not expand on to the next page so not all of the text is visible. If I just set up a 1 row table the expansion works as I would expect and takes up as many pages as needed. Somewhere along the line the add, remove buttons or their associated javascript or the Repeat Row option seems to be having an effect.
    Any ideas?
    Thanks,
    Greig

    Basically you can tell the bodypage to overflow to the second masterpage when it runs out of space.
    On the bodypage properties that's done within the pagination tab.
    Make sure that you enable the "Allow page breaks in contents" tickbox.
    By the way, just wondering, how did you save the form as dynamic, since dynamic is only enabled in the SAP world by setting a dynamic/enabled flag.
    If you are testing outside of sap in the LiveCycle designer you might want to close the file and then reopen it, after you saved it as dynamic. There's a nifty setting in the LiveCycle designer properties which enables you to create dynamic pages by default. It's in the LiveCycle Designer Options.

  • Header Area of Table is not printing on Next Page in SMARTFORM

    Hi All,
    I am facing one problem while Developing a smartform for Delivery.
    I want the same data to be copied to the Next page which is coming on first page. I copied the Main window to Next page with all the details but the Header of the Table is not printing on the Next(Second) page.
    Please help me out regarding this...
    Thanks in advance for your help....
    Thanks & Regards,
    Digamber

    Hi,
    If you are talking about the table (which you created in the main window) and you want the header of the table to be printed on the next page. Is it because of overflowing that's why its printed to the next page?
    If yes, the header cannot be printout out.
    Just for your information. If you want a window in the first page to be copied to all subsequence pages, set the window type to be copies window.
    Hope it helps.

  • Header window tiotle not printing on next page

    Hi !
    I have aa form in which I have a header table created inside the main window to print the titles of the line items, unit , unti price , Qty and totals. The next page has the similar format with the headerr table inside the main window, but unfortunately the header titles from the header title prints on the first page and when there are more items and the items are carried over to next page the titles dosent print on next page. Could nayone please tell me why the titles wouldnt be printing on the next page when the format is the same on teh next page also and it does have the texts to print there . Only the items are printing and not its titles.
    Thanks,

    Hi!
    Thanks for your reply. We are anyways getting the header in the first page its that I am not getting the header titles on second page and folowing pages only. I do have a next page in my smartforms and as per teh design both the pages has the header wondow but still it dosent print on second page but prints on first page. What I ahve done is created an extra window on my next page and created temp[late under that with the header titles and this prints it oin the second page now.
    Thanks

  • Link Reports -item  does not exists on this page

    I have two tables Person table with Primary Key of PersonID, and Person_Qualification Table with a FK of Person_ID.
    I have a report for each table. I have created a report on the Person Table(Page 3000) with a link column to the Person Qualification Report (Page 3119).
    In the link column I created in the person report I have my parameters set as P3000_PersonID and #Person_ID# as field to populate the URL with, and the target page as 3119.
    However anytime I click this link that takes me to the PersonQualification report I get an error stating the Item P3000_Person ID does not exists on this page (3119).
    I have linked a form and report together before, but not two reports.
    I want the person qualification report to be only for the personID that was clicked on.
    I tried adding P3000_PersonID to the query in the person_qualification page I.E. where PersonID=:P3000_PersonID but I still get the item P3000_Person ID does not exists on this page or something to this effect.
    Thanks

    Hello gtjr,
    You need to define an item (usually hidden) on page 3119 to hold the person ID and use that in your second report's query.
    Then in the column link for the first report, specify this new item to be set to the person ID linked.
    The reason for the error is you're telling ApEx to set an item p3000_person_id on page 3119, but that item doesn't exist on page 3119.
    Hope this helps,
    John
    Please remember to reward helpful or correct responses. :-)

Maybe you are looking for