BIP WITH EBS
Hi,
I have a question regarding integrating BI Publisher with EBS. I followed all the steps as mention in the Oracle metalink but my question is where do we need to mention the BIP url. Lets say I have EBS Dev instance and I want to access BIP Reports in UAT instance thru EBS Dev. In this case what settings I need to make in the EBS. Its very urgent as we r in the process of integrating. I am using BIP 10g and EBS 11
Thanks
Hi Tim, it does look like anything should work however I cannot get it working. The OPP fails with a Java error. This means I know that my short name is correct otherwise the template wouldn't fire at all after the conc program has finished. This is running under 11.5.9 EBS BIP 5.6.2.
Also have done plenty of work under BIP EBS so would think I should know the correct process by now(i hope)!!
I have access to a 5.6.3 version today so will try that out and post the actual error for you to look at. Like I said, the OPP fails and the conc program gets a warning.
Cheers
Rob.
http://www.scnet.com.au
Similar Messages
-
Oracle BIP with EBS 11.5.10
I have BIP 10.1.3.4.1 installed and EBS version 11.5.10.2
I want to develop some reports with BIP using EBS data, can any body please help me by telling me shortly the steps I need to do ? Or can you please refer me to some demo ?
I want a solution on urgent bases, I want someone to tell me the track and I will go on my self.
I will be thankul for your replies.
Regards
Nouman ShaikhRTFM - Read the free manual. You set up eBS database as a data source and write queries that go against eBS tables/views. You'll have to take care of org setting and security.
-
Using BIP with EBS without an RDF report
Hi All, I tried this under 5.6.2 some time ago and got stuck. Was hoping a gun here could solve the problem.
I had PLSQL defined concurrent program outputing XML (set to XML output) using fnd_output calls. I defined a Data Definition and Template (using the short name) as I would normally do for an RDF. Try as I might, the OPP would not pick up the report for XML publishing. In fact I think it was throwing a null pointer at the time and the job was returning a "warning". Even though the fnd request output directory was showing my job with perfectly formed XML.
When I looked at all the doco and examples there was not one example that didn't use an RDF. However no limitation is documented. I want to be able to use Xqueries and so on (using the SQL XML extensions) as RDFs have many limitations.
Is a Concurrent Program defined as PLSQL supported by the OPP? If so, is there anything else we need to know?
Rob.
http://www.scnet.com.auHi Tim, it does look like anything should work however I cannot get it working. The OPP fails with a Java error. This means I know that my short name is correct otherwise the template wouldn't fire at all after the conc program has finished. This is running under 11.5.9 EBS BIP 5.6.2.
Also have done plenty of work under BIP EBS so would think I should know the correct process by now(i hope)!!
I have access to a 5.6.3 version today so will try that out and post the actual error for you to look at. Like I said, the OPP fails and the conc program gets a warning.
Cheers
Rob.
http://www.scnet.com.au -
Payment order clearing with EBS in SAP
Hi All,
I am little confused with Payment order clearing with EBS. Actually the process is as below.
1. We create an invoice for Vendor - FB60 / MIRO
2. We make the payment through F110, which creates a payment order but this will not post the payment document. Here, the payment order will be generated for payment ref.
We should clear that Invoice by uploading the EBS.
I have created a posting rule as below
Posting rule Z092
Posting Area 1
Debit side
Posting key 25
Acc Symbol (Debit) - Blank
Credit side
Posting key 50
Acc Symbol (Credit) - Main Bank Account
Document type - KZ
Posting type - 1
Assigned Ext. Trans. Type to posting rule as below
Ext. Trans. Type 702 + Posting rule Z092 Interpretation Alog - 29
The below is the error i am getting while uploading the EBS stmt in FF_5
I am getting the error saying "Error: (F5 104) Vendor * is not defined in company code XXXX".
The Accounting entry should be
Dr Vendor A/C
Cr Main Bank A/CHi Raju ,
The Problem seems to be that the payment order number is extended with your company code number due to which the system is not recognizing your payment order. Give one more try by just entering the payment order number and deleting the co code and year after that, just like below.
88,0000002157
88,/06590719801706 0000002157
88,0000002157
Thanks,
Suresh -
Integrating CRM On Demand with EBS (12.1.3) using BPEL
Hi,
I am working on POC for the integration between EBS and CRM On Demand. We are EBS R12.1.3 and have SOA Suite 10g.
We are planning to use BPEL to do this communication between EBS and CRM OD. Is this something that is possible using BPEL. In additional to BPEL, do we need Java coding or any other language coding?
I donwloaded the Account WSDL from the CRM OD website. Created a new BPEL Process using that WSDL. I read that we need to pass the login credentials using a soap header. Can you please let me know how we can do this in a BPEL Process.
Any pointers would help me alot.
Thanks in advance.
Thanks,
Sreenivas.Hi,
I found a document about using this feature with EBS 11i. I could not find any document that says it is not supported.
http://simplelogic.in/casestudy/Oracle_EBS_11i_Resumable_Space_Allocation_For_Manufacturing_Sector.pdf
Regards,
Bashar -
Error while integrating OBIEE report with EBS using Rich Content Container
I am trying to integrate OBIEE report with EBS using Rich Content Container OAF functionality. I have followed the steps mentioned in oracle Note - Embedding Analytics in Oracle E-Business Suite [ID 974422.1]. When i run my page, the container region comes up with the error message - The requested URL /pls/ghrfpkd2/OracleSSWA.Execute was not found on this server. Can someone please help me with some documents on the steps to integrate OBIEE with EBS using Rich Content Container.
I'm getting the same error on WebSphere 6.1.5. Is there any solution for this?
-
OIM with EBS HR for recon and UM for provisioning - urgent
Hi All
I am trying to setup OIM with EBS HR mod as the trusted source and EBS User mod for user provisioning. I am using the OOB EBS connector version 90430 with OIM 9.1.0.1. I have configured the reconcialiation and provisioning as per the oracle documentation. But only few of the parameters are reconciled into the OIM->USR table. When I go to Reconciliation Manager, I can see only few data fields in the processed data region and rest are in the unprocessed data region. The recon engine is able to pick up the corresponding values from the HR system but is not able to process the same.
Please let me know where can be the problem reside.
Also when I provision a record into Oracle EBS User mod, even if I give all the required data in the direct provisioning form, an account is created in the EBS system with partial data e.g. email is not getting provisioned.
Please help me in setting up recon and provisioning in OIM - EBS.
This is really urgent.. please help !!!
ThanksThe standard suggestion for that is:
- What's the reeson for using EBIZ connector version *9043*. That's an older version and may be these things which you are referring to could not be part of that connector.
- Use the ORCL_EBS_UM_91000 and ORCL_EBS_ER_91000. You can download it from OTN. This should resolve the outstanding issues for you.
Thanks
Sunny -
Help needed in Apex Integration with EBS
Hi All,
Currently, when trying to integrate with EBS these are the steps I followed.
1) Created apex generate hash and apex launch procedure in APPS DB.
2) Created Profile in Application Developer Responsibility.
3) Saved above profile in system administrator -->Profile -> System and set the site level as http://<hostname>:<Apex port>/pls/apex
4) Created a function in system administrator , type as SSWA plsql function and called the launch procedure and passed parameters as my apex application and page id.
5) Created a Web PL/SQL entry under System Administrator Responsibility -> Security -> Web PL/SQL for the launch procedure.
6) Created menu, responsibility and assigned to the user.
For the APEX application , currently I have not given any login page. The login is through EBS only. I have given logout URL in apex application to EBS Login page. Now my problem is , when I click Logout the session of EBS does not get invalidated. How can I achieve this ?
Secondly, When I give the APEX application URL directly in the browser it will open without asking for the EBS login credential. But I do not want this to happen. I need it to be authenticated through EBS login credential.
Any suggestions would be welcome.
Thanks
AlakaHi Scott,
I tried the solution given in this URL.
http://oracledbas.blogspot.com/2008/11/oracle-application-express.html
It is not working for me.. I tried in the forum also.
While creating authentication scheme I gave Oracle EBS Login Page as Session Not Valid URL. But every time I login to EBS and click responsibility then menu which has APEX screen, it is not validating username and password and it redirects to EBS login page which i gave in "session not valid URL" (it is going to a loop.)
Now my problem is when I login to EBS and click responsibility then my APEX screen should validate the EBS login and directly it should open. It should not ask for any other (APEX login)login page. If I paste the APEX application URL in any browser it should ask for EBS login page.
When I logout it should invalidate the session of EBS.
Thanks
Alaka -
What about the security we support when the BIA is not SSO with EBS
For the following security mode, if all of them need the SSO with EBS?
Operating Unit-Based Security for Oracle EBS
Inventory Org-Based Security for Oracle EBS
Ledger-Based Security for Oracle EBS
Business Group Org-Based Security for Oracle EBS
HR Org-Based Security for Oracle EBS
Human Resource Personnel Data Analyst Security for Oracle EBS
Employee-Based Security for Oracle EBSwell you could do the security in OBIEE as well, but why shouldn't you use SSO?
-
Scan listenser with EBS R12.1.2
Hi All
I am planning to upgrade my DB to 11R2 with EBS R12.1.2 with RAC on linux platform .
I have doubt can i use Scan listener with R12.1.2 EBS.
I am referring doc Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
Kindly advice me, if i can not use then is there any other method.
Thanks
KrishnaThanks for reply. The doc which i have mention in last post says that EBS R12.1.3 is supporting scan listener. but doc does not say about R12.1.2. do you have any idea that can i use this with EBS R12.1.2It is supported with 12.1.2 if you have the patches under "For Oracle E-Business Suite Release 12.1" section applied.
Thanks,
Hussein -
Hi;
I just read this and want to share Steven Chan's good news :
Database 11gR1 11.1.0.7 Certified With EBS 12.1.1 on Windows Server 2003 (x64) for details please visit :
http://blogs.oracle.com/stevenChan/2009/10/database_11107_ebs1211_winx64.html
Regard
Helios
Edited by: helios on 26.Eki.2009 07:30Hi,
Thanks for sharing the document, but I would suggest you change the link to the following as the link above points to the main blog link ;)
http://blogs.oracle.com/stevenChan/2009/10/database_11107_ebs1211_winx64.html
Regards,
Hussein -
Integration of Oracle Apex with EBS R12.1.1
Dear All,
We are in process of integrating Oracle Apex 4.0.2 with EBS R12.1.1 with the help of http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf.
After doing all the steps, the moment when we navigate from EBS application to Apex application by clicking on the EBS menu link it ends up with below error
"404 Not Found
Resource /OA_HTML/null/pls/apex/f not found on this server"
After some analysis i found the below code in "LaunchApex.jsp" for getting the profile value (supposed to be 'http://myserver:port') from custom system profile "APEX_HTTP_SERVER" and prefixing to "/apex/f?p=applicationid:page::APPS:::" is not happening properly
String l_launcher = ctx.getProfileStore().getProfile("APEX_HTTP_SERVER");
l_launcher = l_launcher + "/apex/f?p=" + p_application + ":" + p_page;
l_launcher = l_launcher + "::APPS:::" + p_item_names + ":" + p_item_values;
as we found that the custom system profile "APEX_HTTP_SERVER" not exist in EBS system. But it works without any page error if we hard code the entire apex application URL in l_launcher variable, but this takes us to EBS login page instead of Apex application page.
So i feel we can't bypass using profile value from "APEX_HTTP_SERVER" as it has some relation with EBS application session.
So could anyone please help me how we could create custom system profile "APEX_HTTP_SERVER" or any other options to make the seamless integration of Oracle apex with EBS works without any second login page
Thanks in advance
Edited by: 805196 on Aug 25, 2011 12:23 AMHi,
Create a profile under Application Developer Responsibility as follow:
Name OAE_LAUNCHER
Application <whatever>
User Profile Name Oracle Application Express Launcher
Description Oracle Application Express Launcher
2. Set above profile value under System Administrator Responsibility -> Profile -> System, and search for the ‘OAE_LAUNCHER’.
Set the value at Site Level as:
http://<hostname>:<Apex port>/pls/apex
Then instead of hardcoding the URL in the jsp, just give the profile name OAE_LAUNCHER that you have just created in the jsp.
Hope this helps you
Brgds,
Mini
If this is helpful or correct, assign points promptly. -
HI,
OS : RHEL 4
64 bit
We are planning for Upgrade Oracle 10.2.0.3 database to 11.2.0.3 with EBS R12.0.4.
Please give me steps by step to do the same.
Other than this please refer me any blogs ..
Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]
ThanksWhich is the best approach for upgarde ?
APPS - 12.0.6
DB - 10.2.0.3
My DB Size is 400GB
1. DBUA
2. Export / Import utility
3. SQL Copy
Client cannot afford downtime .. we are getting approx 6 hrs to complete the task in PROD.DBUA should be the fastest one.
What is the approx time reuired?Depends on many factors (hardware resources, size of the database, ..etc). Please try this in a test instance to estimate the time it requires to do this upgrade.
Thanks,
Hussein -
OBIA 7.9.6.3 security integration with EBS R12.1.2
Hi Experts,
We are implementing OBI Apps 7.9.6.3 with EBS R12.1.2 as source.We need to integrate Active Directory with OBIEE and implement security of BI Apps with EBS R12.1.2. Need help on this.
How to map EBS Responsibilities into Application Role and Groups? Whether we need to create one Application Role and Group for each responsibility ? Then provide permissions in rpd for each of them? The user should have similar permission in BI as they have in EBS - like people can see only US Finance data in EBS should see only US Finance data in BI also.
Regards,
mvsstYou can go through obia security guide which explains step by step procedure with screenshot on how to implement ebs authentication and role based access.
here is the link.
http://docs.oracle.com/cd/E21043_01/bi.1111/e16364/ebs_actions.htm
Regards,
RAM
Edited by: RAM CH on May 20, 2012 1:34 PM -
How to integrate BI Appliation with EBS
Hi All,
I have installed BI Application 7.9.4 version and Oracle EBS 11.5.10 versions.Want to know the process how we will do the integration of BI Appliaction with EBS.
I have do something following the "Oracle® Business Intelligence Applications
Installation and Configuration Guide Version 7.9.4 ",
now I want to know how the BIEE acess the EBS data, and what should I do.
Is there any other doucument about it?
waiting ....see the following post: Integrating BI Application with EBS
Chris
Maybe you are looking for
-
Hi, I have a bit of a frustrating situation - I received a full copy of Photoshop Elements 9 (for Mac) with a printer 2 years ago, installed it and used it on and off without problem for a year or so. Brilliant. Earlier this year, running out of disk
-
Hi is it possible to create control buttons in run time based on the input given by the user.Do any one have the demo program
-
External hard drive, time machine and games
I have a seagate external I've been using with my g5 iMac as a time machine backup. kids got guitar hero and spore for xmas, and it is playable only on my wife's intel macbook, which simply lacks the hard drive space for them. what I would like to do
-
Recently my iPhone 4's sounds are going haywire. I have a Jensen radio iPod dock that I hooked it up to earlier on in the week(first time too) and when it played a song, my iPhone said that this video was being played on a television. Since then the
-
Whenever I boot my pc, which operates on windows 64 bit, I receive the erroer message: 'The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll' This appears to be a common problem, can anyone pro