BIR Form 2307 set up for the Philippines (std formname IDWTCERT_PH_2307)

Hi Gurus,
I would just like to ask help in setting up this standard form in fico. It is a sap standard smartform with the name IDWTCERT_PH_2307. The form can be configured in tcode S_P00_07000134 by supplying the form name to be printed but an error message "company code 1000 missing" appears and the printing won't proceed anymore.
Your prompt response will be recognized.
Thanks so much.
Janine

Hi Sir,
Yes, company code 1000 has been configured in the system but that error occurs and the form won't continue printing.
please, really need your help.
Thanks.
Regards,
Janine

Similar Messages

  • HT204053 I have tried to load iCloud onto my Vista opperated pc but do not get a control panel with which to set it up. Each time I use my iTunes id to log into the iCloudI am told that it is an apple id but not set up for the Cloud. How do I get the cont

    I have tried to install iCloud on to my Windows Vista pc. No control panel is present and when I try to login to iCloud using my iTunes id, I am told that it is an Apple id but not set up for the cloud. without the control panel where do I set up my iCloud id?

    You can not setup a new iCloud account using a PC. You must use an Apple device (Mac or iPhone/iPad) to create the account, then sign into it using your PC.

  • What is the factory set password for the administrator for a macbook pro 13" retina display?

    what is the factory set password for the administrator for a macbook pro 13" retina display?

    Welcome to Apple Support Communities
    Macs don't come with a password. You have to set up the password during the initial setup. If you have forgotten your password, follow these steps to reset your password > http://discussions.apple.com/docs/DOC-4101

  • Process open items: how to set defaults for the additional selections

    Hi FI experts,
    Can anyone tell me if it is possible to set defaults for the additional selections in the processing of open items.
    I am using transaction F-04 (or F-06 or F-07) to post with clearing.
    When processing the open items I can use additional selection parameters. In my case I need to use the document type.  I would like to save this selection as a default but this doesn't seem to be possible.
    1. it is not possible to save a variant for the processing of open items
    2. I can not create a variant transaction (with trx. SHD0) for F-0x since this is only possible for dialog transactions
    Do you see another way to store defaults for the additional selections in open item processing?
    Thanks a lot.
    Dimitri

    Hi,
    When you create a transaction variant from FB05, then also you will not able to default the value for additional selections variable.  Hence SHD0 is not going to help.
    As said above, either you can change the additional selection screen parameters, but here again you can't default the value.  You can only reduce the number of entries on the screen.
    Else you can create a custom transaction code by copying the standard.  Even SAP recommends to create custom codes from standard tcode for clearing purposes depending on requirements. 
    Please check this link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/37b8e7455b11d182b40000e829fbfe/frameset.htm
    In the above link, in navigation choose clearing -- Specifications for processing open items
    If it is a custom transaction then you can default document number.
    Regards,
    Ravi

  • Which are the setting values for the Virtual CTI Driver? (Siebel Communica)

    hi everybody,
    the application I'm using is Siebel Communications 8.1.
    I am learning about integration processes with the Siebel Communications Server Administration Guide. One of the points or topics there is the use of the Virtual CTI to integrate your Siebel Business Applications with Oracle Contact Center Anywhere (as in the bookshelf described).
    I've read, with this driver agents can access communications functionality using the communications toolbar.
    The Virtual CTI is a driver provided by Oracle. You can't see it listed on the Administration -> Communications ----> Communications Drivers and Profiles. So I guess it is important to add this driver to the list.
    I have questions about that:
    1. Should I add this driver to the list? or when can I do that?
    2. Which are the setting values for the mentioned driver?
    - Communications Channel?
    - Inbound Yes
    - Outbound Yes
    - Interactive
    - Channel string
    - Library name
    Could anybody help me? I would appreciate that.
    Regards

    Thanks for the reply KT.
    I am not sure how to set a new custom style, but will look it up. If you have a url that points to the topic I would appreciate it.
    Thanks,
    Rhek

  • I am setting up for the first time, i didn't get the print out while setting up with my sign info

    i am setting up for the first time, i didn't get the print out while setting up with my sign information. None of my email information or original password are working.

    Hi there, what printer model do you own?
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • How to set widescreen for the guest OS (Oracle Linux 5) in Oracle VM 4.1.12

    Hi all
    I have got a concert about how to set the guest system(Oracle Linux5) to use widescreen? appreciate whatever you can help!
    Thanks,

    You're looking for the VirtualBox forums. https://forums.virtualbox.org/
    This forum is for discussion of Oracle VM Server.

  • Set data for the x-axis

    Hi,
    I made a program which allows the user to configure and measure Temperature and voltage using a DAQ device. I also set a possibility for the user to save his data of his test to lvm file and then upload and read it on a waveform chart. My problem is that while the user  gets multiple plots represented in the y axis (the different Temperature/voltage channels signals of the DAQ), the x-axis is set to time by default.
    How can I change it? I would like to allow the user to change the x-axis from time to one of the plots of his tests data.
    for example, lets say I get 2 signals of temperature (mod1/ai0 and mod1/ai1) and 2 signals of voltage (mod2/ai0 and mod2/ai1) on the y axis (amplitude) during 3 hours (represented in x-axis) and I would like to allow the user the option to play with the data so he can see temperature on the y axis as a function of the voltage on the x axis (instead of time) and the option to configure any kind of combination while the program is running (set mod1/ai0 in the y-axis and mod2/ai0 in the x-axis, for instance).
    I have tried various things but nothing seems to work. It looks like it is very easy to change plots between multiple Y-axis with property node of "Active plot" and "Y scale index" but I can't figure out how to change plots from the Y-axis to X-axis and vice versa.
    I hope this clumsy message is somehow clear..
    Thanks a lot in advance,
    Shahar L.
    Detectomat Gmbh
    Hamburg, Germany

    Hi Shahar,
    You will have to use an XY graph, not a waveform chart, if you want to set the X-axis data.  Under "Find Examples", see "Fundamentals"..."Graphs and Charts" for some examples of XY-graphs and how to use them.  You can't change the X-axis data of a waveform chart, as you have discovered.
    Hope this is helpful...
    Diane

  • What should the moile netword setting be for the Driod maxx

    I just got my Driod Maxx and the mobile network setting are set on global is it OK for it to stay there or should I can it?

    As demmo86rt mentioned and SuzyQ  I run my phones on LTE / CDMA for me I think my phones response to the Network is better in this setting but for some Gloabal will work probably just as Good,  Something I want be made aware of there is new update that has recently came out for the Droid Maxx.. some customers / members on here are having issues with there phone after updating to this Latest update and possibly the one right before it,, My Droid Maxx is running Totally Fine as is with 4.4.4  system Version 21.11.21.obake-maxx.. If you have not updated and have this Version here I posted and your phone is running fine I'd keep it were it's at for a little while any way..
    Hope this helps..

  • Setting Qos for the Cisco C20plus codec endpoints.

    My company has implemented a cisco video conferencing system using the Cisco C20plus codecs as H323 endpoints.
    We currently utilise the Optus evolve network (MPLS) for our WAN
    Our network WAN utilises Qos per VLAN settings.
    For example, phones are in their own VLANs per site and the video conferencing system has its own VLAN.
    We policy map ACLs to the following Qos classes specified by Optus in order of priority (Highest to lowest):
     Gold-RT
     Gold-NRT
     Silver-NRT3
     Silver-NRT2
     Silver-NRT1
     Default
    Cisco recommend that Gold-RT is reserved for audio (phones) so I would like to set the C20plus video and audio traffic in the Gold-NRT class.
    This class has the DSCP bits set to af42 which is more than ample priority for the video conferencing traffic.
    Can anyone tell me what ports I need to specify in a permit statement in the Gold-NRT ACL to apply dscp af42 to the video and audio traffic please?
    All C20plus endpoints RTP ports range are set to 2326 - 2486 so I will need a UDP permit statement for those ports for the C20plus endpoint ip address.
    Are these the only ports that I need add to the Gold-NRT ACL?

    As Dejan has said, this question would be better placed in the TelePresence section of the forums where endpoints such as the C20 are discussed.
    In any case, if you set your switch ports to trust the DSCP markings on the packets, the tags themselves can be applied on the endpoint.
    If you go to the web interface of the C20 and log in, then go to Configuration > System Configuration > Network.
    Scroll down near the bottom and you'll find the QoS section.  Here you can set the Mode to "Diffserv" and set each of the individual values as required, ie, if you want AF42, enter 36 in the field (see the Assured Forwarding table on wikipedia for other value mappings).
    Wayne
    Please remember to rate responses and to mark your question as answered if appropriate.

  • Setting icon for the JMenuItem

    I am trying to set the Icon for the JMenuItem and not able to do so.
    I have the Images directory in the classes which has all the images. Is this the way to give the dir path. When do I give '\' and when do I give '/' or'//' or'\\'? Thanks.
    I gave
    JMenuItem mnuitmFileNew = new JMenuItem(new ImageIcon("Images//new.jpg"));
    and later in Jbinit() method I have this.
    mnuitmFileNew.setMnemonic('N');
    mnuitmFileNew.setText("New");
    mnuitmFileNew.addActionListener(new java.awt.event.ActionListener() {
    public void actionPerformed(ActionEvent e) {
    mnuitmFileNew_actionPerformed(e);
    });

    Hi,
    I'm not sure if you've seen this yet:
    http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html
    If you still have any questions please post again.
    Regards,
    Matt
    Java Developer Technical Support
    Sun Microsystems

  • Set Forecolor for the row in a matrix

    Hi,
    I'd like to do a matrix with many Log Messages (like System Message Log in Sap), and each row can have a different color (Blu = information, Red = Error, etc). What is the properties that i must set to change the color for every row??
    Thanks
    Marco

    Hi,
    U can only set the forecolor to the Column. Its not possible to set the color to the ROWs.
    Vasu Natari.

  • Possible to set CacheSize for the single-JVM version of the data cache?

    Hi -
    I'm using Kodo 2.3.2.
    Can I set the size for the data cache when I'm using a subclass of the single-JVM version of the
    data cache? Or is this only a feature for the distributed version?
    Here are more details...
    I'm using a subclass of LocalCache so I can display the cache contents.
    The kodo.properties contains these lines:
    com.solarmetric.kodo.DataCacheClass=com.siemens.financial.jdoprototype.app.TntLocalCache
    com.solarmetric.kodo.DataCacheProperties=CacheSize=10
    When my test program starts, it displays getConfiguration().getDataCacheProperties() and the value
    is displayed as "CacheSize=10".
    But when I load 25 objects by OID and display the contents of the cache, I see that all the objects
    have been cached (not just 10). Can you shed light on this?
    Thanks,
    Les

    The actual size of the cache is a bit more complex than just the CacheSize
    setting. The CacheSize is the number of hard references to maintain in the
    cache. So, the most-recently-used 10 elements will have hard refs to them,
    and the other 15 will be moved to a SoftValueCache. Soft references are not
    garbage-collected immediately, so you might see the cache size remain at
    25 until you run out of memory. (The JVM has a good deal of flexibility in
    how it implements soft references. The theory is that soft refs should stay
    around until absolutely necessary, but many JVMs treat them the same as
    weak refs.)
    Additionally, pinning objects into the cache has an impact on the cache
    size. Pinned objects do not count against the cache size. So, if you have
    15 pinned objects, the cache size could be 25 even if there are no soft
    references being maintained.
    -Patrick
    In article <aqrpqo$rl7$[email protected]>, Les Selecky wrote:
    Hi -
    I'm using Kodo 2.3.2.
    Can I set the size for the data cache when I'm using a subclass of the single-JVM version of the
    data cache? Or is this only a feature for the distributed version?
    Here are more details...
    I'm using a subclass of LocalCache so I can display the cache contents.
    The kodo.properties contains these lines:
    com.solarmetric.kodo.DataCacheClass=com.siemens.financial.jdoprototype.app.TntLocalCache
    com.solarmetric.kodo.DataCacheProperties=CacheSize=10
    When my test program starts, it displays getConfiguration().getDataCacheProperties() and the value
    is displayed as "CacheSize=10".
    But when I load 25 objects by OID and display the contents of the cache, I see that all the objects
    have been cached (not just 10). Can you shed light on this?
    Thanks,
    Les
    Patrick Linskey [email protected]
    SolarMetric Inc. http://www.solarmetric.com

  • Setting up for the first time

    Hello
    My father in law has just purchased an iMac and also a Time Capsule, and has asked me to set it for him as he has no idea how to do it. As a graphic designer I know my way around a Mac pretty well but have no experience in Time Capsules at all.
    Can anyone offer any advice on how to begin. I've read the instruction document and although I'm not stupid I did struggle to take it in!
    The computer is just for home use and there are no other computers requiring backing up. Am I right in thinking the time capsule needs to be connected to his wireless router, and if so, for what reason? Also, if he connects the printer to it too, does this mean he can print without wires?

    What does he want to do with the Time Capsule?
    If it's only for Time Machine backups, and since he already has a wireless router, using a Time Capsule may not be the best way to back up.
    A good external HD connected to his iMac via USB (or, better, FireWire) will be much faster and more reliable (not to mention less expensive). If so, he could probably return the Time Capsule.
    But if he does want to use it for backups, then he must decide if he wants to continue using the existing wireless router.
    He could probably replace the wireless router with the Time Capsule, connect a USB printer to it, and do both backups and printing wirelessly.
    Depending on what he wants to do, you may want to browse, search, or re-post in the +Time Capsule+ forum (where the networking gurus hang out), hiding in the +Digital Life+ section, at: http://discussions.apple.com/forum.jspa?forumID=1253

  • Setting targets for the KPI's

    Where and how do you set the target for the KPI?
    I see that there are input ready quesries available to set targets how to use them?
    Can you only set targets for base KPI's?
    How and where is the data collected stored for the KPI's? in the standard cube given as business content?
    I would really appreciate your input Gurus.

    Hi Sijesh,
    I am also, currently working on a project implementing BO SuPM Version 1.0. Landscape is ECC -> BI -> SuPM dashboards.
    I have created a KPI in SuPM dashboard.
    Case 1 : Automatic data collection - This KPI is marked for Automatic data collection. So, maintained Scripts with Connectivity and SAP BW Query name. I save this KPI and include in a new report and Run it. There are no records displayed.
    Case 2: Manual data collection - This KPI is marked for manual data collection. So, maintained values in SuPM portal itself. I save this KPI and include in a new report and Run it. There are no records displayed.
    Could you please help me how KPI in SuPM be filled manually and automatically ( from BW Query)?
    Thanks,
    Best Regards
    PhaniRaj

Maybe you are looking for