BIS and Sender Policy Framework

I have a user that is using a BlackBerry Curve and is setup with At&t BIS service and has no problems receiving messages. The company this person works for has a SPF policy ( http://en.wikipedia.org/wiki/Sender_policy_framework ) that restricts which servers can send out as the the domain. The company will not modify their SPF record to include RIM's or the carriers servers and connecting the user to our BES service is unfortunately not an option. Our SMTP server is listed as a valid sender in this domains SPF policy.
Is there any way to specify a specific SMTP server for a device that is using the BIS service?
Thanks in advance!!!

Hi,
Interface service policies take precedence over the global service policy for a given feature. For example, if you have a global policy with FTP inspection, and an interface policy with TCP normalization, then both FTP inspection and TCP normalization are applied to the interface. However, if you have a global policy with FTP inspection, and an interface policy with FTP inspection, then only the interface policy FTP inspection is applied to that interface.
Here is a doc for detailed study:
http://www.cisco.com/en/US/partner/docs/security/asa/asa82/configuration/guide/mpf.html
Hope this clears out your doubt.
Thanks,
Varun

Similar Messages

Retention Policy - Archive All folders to archive-maibox (including inbox and send items)

Hello,
with exchange 2010 we have a retention policy to archive all mail older than 2 years to the archive-maiblox using the retention policy.
The policy is having the setting "all other folders", so this isn`t working for the folder "inbox" "send items" etc.
What can i change to have ALL folders moved to the archive-mailbox?
Thx

Hi,
Did you means that you select "All other folders in the mailbox" as a tag type? Is right?
If so, it will not work for the default folders (such as Inbox and Send Items..).
Please refer to the following thread:
Exchange 2010: Retention Policy Tag
Type- All other folders in the mailbox
Thanks.
Niko Cheng
TechNet Community Support

Zip the data and send through JDBC adapter.

hi,
I need to retrive the data from database, zip it and send to xi. At the receiver and i need to unzip it.
I know that it can be achieved using java mapping. Is there any other solution?

Hi,
This will help you
Zip-Transfer-Unzip: Increase the performance of your Java-ABAP applications
Working with the PayloadZipBean module of the XI Adapter Framework
REgards
Seshagiri

Hyperion IR BQY job run successful few month but recently failed to export pdf and sending email

Anyone have encountered the problem that the BQY jobs which are running more than 3 years successfully. But recently no one update the report, but the job export keep failing to send result pdf to receivers intermittently.
It shouldn't be BQY job itself problem. Because this job has running years and fine. Only recent days comes out this problem. And user manually run the report can also be successful.
After checking the server log, find out that Hyperion IR retrieved data successfully but export-excel/bqy type file all works except pdf format. And in one week, some day it works fine. Some day it failed.
Trace in workspace job schedule log, it saying:
Emailing section 'xxxxxx' as 'PDF' to:
[email protected]
[email protected]
Export failed with unknown error.
And checked the server_message_IRJobService.log it just saying:
Error in export.[[
And
TCApp::ExecuteJavaScript failed:
We stuck at this error for a period of time. Anyone can help? Oracle Support has mentioned it might be system performance issue. Will keep an eye on this issue, to see any solution can be find.

Hi RamKumar,
Thank you very much for your inputs. We haven't tried
Increase the memory for the Hyperion Framework Services
will test and see if it can solve the problem. For 'Hyperion Framework Service', do you mean 'Reporting and Analysis Framework'?
We only tried increase the parameter of "Job Service" and "Intelligence Service" which called Dynamic Service Properties set to "PROCESS_MEMORY_LIMIT=2500MB". But seems hyperion this 32bit application only can reach to 2047MB.
Our EPM version is 11.1.2.1.600.07.
a. We have increased the memory from 24G to 48G and add more memory for JobService (now it has 2 GB memory).
     For the provided solution.
     Set the filters in the query to return smaller amount of data
     We are still working on, but it seems slightly solve the "Error in export" problem.
b. We have confirmed the SMTP Server configuration is correct. So this solution not fit for our case. As the trouble job has been running more than 3 years, until recent month it starts with this error. And the job failed this error only happens intermittently e.g. Monday,Tuesday,Friday it all works fine(Proved the job it self is OK) but Wednesday some period, it failed to export. So we are thinking it might the hyperion performance issue.
For the KM reference:
Interactive Reporting (IR) Jobs do not Send Emails. Error: "Export failed. Error Sending Mail" (Doc ID 1401854.1)
We have already read and checked, we do have correct configuration.
Interactive Reporting Job Completing With Javascript Errors - Not Producing Excel Output (Doc ID 1065483.1)
Our case is customer can successful extract data and send excel/bqy result to customer with no problem. But it failed to send pdf result sometime.
Thanks and Regards,
Erica

Is it possible for Windows 2008R2 Domain Controllers to audit when a programs are installed/uninstalled on clients and send alerts to Admins?

We have a program called Audit Wizard that we used with Windows 2003 that monitored all clients and alerted my department when a program was installed/uininstalled. since upgrading to windows server 2008R2, the program no longer works correctly.
So we are wondering if it is possible for Windows 2008R2 Domain Controllers, running at a 2008R2 forest and domain level) to be able to audit when a programs are installed/uninstalled on clients and send alerts to our Admins?
If so, How?
Thanks in advance for your help!
Pete Macias

Hi Pete,
>>So we are wondering if it is possible for Windows 2008R2 Domain Controllers, running at a 2008R2 forest and domain level) to be able to audit when a programs are installed/uninstalled on clients and send alerts to our Admins?
As far as I know, group policy can't help us do this. If you are interested, we can take a look at System Center Operation Manager and ask for suggestions in the following SCOM forum.
Operations Guide for System Center 2012 - Operations Manager
https://technet.microsoft.com/en-us/library/hh212887.aspx
System Center Operation Manager
https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Unable to send messages and "send" function is unavailable when replying to a message.

I m unable to send messages and "send" function is unavailable when replying to a message.
My device is BB device model is 7290
IT Support Analyst

Typically this means a corrupt xxxxx [CMIME] service book. Go to Options > Advanced Options > Service Books. Highlight the xxxxx [CMIME] service book and press delete. Wait 30 seconds click the track wheel and select undelete. If this doesnt work you can have the service books resent by your BES admin (if BES connected) or send them to yourself from the BIS website (if its a BIS account).

BIS and MS Exchange email issue

Hello everyone,
I own a Blackberry Pearl 8110 with BIS and have it setup for two email accounts; my gmail and work accounts. I have no problems with the gmail account only the MS Exchange account. I've been searching google and theses forums and I'm having trouble defining the problem to a few key words so I've not had any luck finding answers. Anyway, here is how I replicate the issue.
Using the web I login to my gmail account, then using Outlook I login to my Exchange account. I send an email from gmail to exchange and my phone will buzz telling me I have a new email in my Exchange account. All is good so far. Then using Outlook I reply to the email I sent. Then my phone buzzes twice. I get one message from gmail saying I got a new email at my gmail account AND I get another message from my exchange account saying I have a new email from my gmail account. The new email is the email that I replied to without my reply. It's important to note that this mystery email does not show up in my Outlook.
This gets very annoying as it looks like I sent myself a duplicate email or, in a real case, it looks like people are sending me the exact same email after I reply to them. This happens every time I reply to an email from my Exchange account.
Both Gmail and Exchange are setup for IMAP.
If anyone has some insight as to why this might be happening I would greatly appreciate it. Also, if I've left out some info just let me know.
Thank you for your help.

tiabia wrote:
I don't think that is the question that the user was asking (and if so, then I apologize for being assumptive).
I believe the issue is that same one that I am having, in that if I respond to an email through Outlook (work email) that I also have added to by blackberry via BIS, I receive the ORIGINAL email (without my response). For example:
Original Email From John Doe: Hi Tiabia
Response Email From Me: Hi John Doe
Original Email that I receive on blackberry: From John Doe: Hi Tiabia
I hope I explained that well enough, LOL.
Hi and Welcome to the forums!
For what you report, perhaps this KB will be relevant. Feel free to search the KBs for things that might be more relevant.
Best.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer.?

I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .

I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
MacBook Pro, Mac OS X (10.7.2).

Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page

Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page.

Not sure about Utilities on your iPad. Do you mean the Settings app?
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem.

My iphone 4S stopped receiving and sending text messges. Help!

My iphone 4S stopped receiving and sending text messges. Help!

Hi J.A. Curie!
Here is an article that can help you troubleshoot this issue:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

HCM P&F: Check and Send won't update back end fields?

Hi All,
Here is my issue: I have a field that is not editable on the screen - we manipulate it using a generic service that is called when the user presses a button.
Of course, as we know, all services are called every time 1 service is called, so it ALSO gets called at check and send.
This would be fine, except P&F appears to not actually change the field value at check and send.
So for instance - I click the button and it puts a value of 1.05 in the field. Great - works fine.
If I don't click the button and instead only click check & send - I can see in debugger that it is doing the calculation and putting the correct value in the service_datasets table, but when the form loads the value is not updated on the screen and it is not passed to the next step.
Should check and send manipulate that value? If not, is there a way to force the user event to be called? Sadly, I can't set the field as required, because the required check passes before P&F ignores the new value...
Alternatively, I suppose if there were a way to know the difference between check & send and a user event in the code, that would be good enough.

"Check" should change it just like your User Event does. Is your User Event set to do "check" operation too or is it doing "initialize"? That might be a difference. But yes....the check/send should be changing it on the form to reflect the new value. I do it all the time (for example, in on of my processes right now I have a table of wage types and when the user adds a new wage type to the table, another field is triggered that shows the calculated annual salary in an non-edit form field.....same kinda idea as you are trying).

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

Follow the instructions under the heading "How to unlink a phone number" on this page.

How to get the value from a JavaScript and send the same to Java file?

Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie V

Yes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
}

Not able to get the Check and send buttons.

Hi
I am working on HCM Process n Form, It has integration of Webdynpro, Adobe and Process Forms.
We can Create and Modify the position in this applications, There is also option for Saving it as Draft and then Opening it and sending it.
But now when we save it as Draft and try to open it opens the component which has adobe integrated to it but the buttons "Check and Send" and close are not appearing.
There is an dynamic table populated in a popup and by clicking that link it opens the adobe form in a WDA component window.
I am not able to figure it out which component it is and how it is done.
By click of link an action is written which finally fires a plug, The details of this plug i cant find in Windows.
The main component which opens the pop up is POBJ_BROWSER There is no used Components in this Component apart from ALV Table and SELECT OPTIONS
and the final code which we can see after click of link is
methods Fire_pobj_click_overview_Evt
importing
ATTRIBUTES type Pobjt_Level_Attribute
BROWSER_CONTEXT type String
COLUMN_NAME type String
LEVEL_GUID type Pobj_Level_Guid ."#EC NEEDED
If there is any one who have worked on this or any helpfull documents regd this Please let me know
Thanks & Regards,
Deepak.B

Supposed to post in HCM Forum.

When i ask a question on ebay and send, when i try to back tab it keeps insisting on resend how can i turn this off?

you search items on ebay,ask a question of the seller and send it, i then want to return to my listing and the searched items, but firefox will only let me do this if i resend my question every time, it means all the messages i send asking a question are duplicated, how can i turn this annoying protocol off?

Feedback? Did any of this help?

BIS and Sender Policy Framework

Similar Messages

Maybe you are looking for