BIS on Curve with Exchange, connect fail :(

Hi,
Here the problem: Actually i have a BIS on a Blackberry Curve, I have all the parameters, I can connect on my exchange under Internet Explorer or others with the HTTPS format (and not HTTP) but when i configure my blackberry in Microsoft® Outlook Web Access mode, he can't connect that said host not found, can't verifiy your account etc.... somebody have an idea ?
Regards

erchanchal wrote
I am attempting to connect my BB's through OWA, however my owa is working fine from the PC
OK...good information, thank you. So, what, exactly, have you done with the information already posted in this thread? What you've said so far is that "it didn't work", but you didn't reveal exactly what, of the multiple recommendations in this thread, you actually attempted...and the specific results of each attempt (rather than the simple "it didn't work") are always more helpful of course.
erchanchal wrote:
and one more intresting thing i observed that i am able to configure it though my exchange server IP.
That indeed is quite interesting! I've never heard of any direct connection between a BB and an Exchange Server. (I'm not at all sure how such could even be possible...unless, of course, the POP/IMAP/OWA services are hosted on that same physical server, which is of course not recommended.) Indeed, if your Exchange Server is directly facing the internet, then you really should talk to your enterprise security folks...that's a very a-typical configuration indeed!
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Outlook with Exchange connection issues

I am implementing a security policy which includes blocking all outbound traffic on the firewall of our network (Except normal 80, 443 etc). It seems
that if I apply this, some users aren't able to connect to exchange. This appears to be related to Outlook Anywhere. What ports would I need to allow to prevent this connection issue?

Hi
As per the information and details provided by you, to solve the Outlook with Exchange connection issues, Please follow these steps: -
Microsoft introduced
RPC over HHTP as a better way for Outlook client to connect to Exchange. The MAPI connections still use RPCs, but they encapsulate those with an HTTP connection. Since that HTTP connection is secured using SSL, it is may be
more accurate to call it RPC over HTTPS. These connections only require connectivity
over TCP port 443, which as you know is assigned to HTTPS and is normally open by
firewall admin for web servers.
Outlook Anywhere wraps
Remote Procedure Calls inside an HTTP layer to allow connectivity with the Exchange server. This simplifies the firewall administration process requiring only
the SSL port 443 to be opened to the CAS (Client Access Server) instead of several ports to the actual Mailbox Server (MBX).
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Calendar update in combination with exchange server fails from time to time

seems some calendar entries corrupt the system e.g. no more updating of server, no invitations forwarded, etc. But no obvious error message appears ? Only if you find the corrupt entry by chance and delete it, only then messages will be forwarded and entries updated on the server !?

Lots of discussion on this around the forums Mark. Short answer:
Deactivate/reactivate Calendar on iOS to "reset" the account sync with Exchange.
Find corrupted meetings that jinx iOS via CalCheck or other Exchange/Outlook scan tools
https://discussions.apple.com/thread/1918410?start=75&tstart=0
http://support.microsoft.com/kb/890436
http://blogs.technet.com/b/exchange/archive/2012/02/22/calcheck-the-outlook-cale ndar-checking-tool.aspx

No connection with server, connection failed, asks wifi password

our i-pas has always worked great, suddenly we couldn't use internet anymore. Connection failed and ask wifi password.
I installed the new version of i-tune and re-installed our i-pad. Still no connection. What to do?

Hi,
Please make sure,
1. Correct user ID and password entered
2. There is no firewall/ antivirus turned on
Thanks & Regards,
Nagarajan

Sync of reminders with Exchange server fails

I can't synchronize my OS X Reminders with my Exchange server. I get the following message in Calendar when syncing :
Calendar can't refresh reminders in the calendar "Tasks"
And in the OS X Console, I see these 2 messages (I guess the first one is the root cause of the issue, the second one is just a notification that the sync failed ):
02.03.14 14:24:31.810 CalendarAgent[210]: -[SOAPParser:0x7fd30899aae0 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in EWSTaskRecurrenceType for WeeklyRegeneration (t:WeeklyRegeneration)
02.03.14 14:24:31.812 CalendarAgent[210]: [com.apple.calendar.store.log.exchange] [Exchange error Calendar can’t refresh reminders in the calendar “Tasks”. There was an error attempting to send your changes to the exchange server. (Error Domain=SOAPWebServicesErrorDomain Code=-997 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -997.)")]
I have had this problem for a few months, and it still exists with 10.9.2 ; the sync used to work sometimes, but not anymore.
I guess the error comes from one reminder on the server which has complex recurrence rule.

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Problem with severe connection fail and slow inter...

Havin problem with several automatic disconnection, slow internet and cant get inside online bt repair centre coz its sayin - this no is not provided by bt business...
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 2 days, 06:57:44
Downstream: 1.122 Mbps
Upstream: 80 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 4.0 dB / 7.2 dB
Line attenuation (Down/Up): 65.0 dB / 34.6 dB
Output power (Down/Up): 19.1 dBm / 10.0 dBm
FEC Events (Down/Up): 9019906 / 503
CRC Events (Down/Up): 656 / 131
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 5492 / 23
Error Seconds (Local/Remote): 62 / 33

as you are a business user you need to post on the business forum https://business.forums.bt.com/
this forum is for residential customer
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Uncaught exception 'RTCError' with message 'connection-failed' in lccs.php:729

I am unable to connect to my account.
I get the above mentioned exception.
I have lccs version 1.3.5 and my php version is 5.2.9
Its an apcahe running on windows vista.
I just have the following code on the server:
include "lccs.php";
$am = new RTCAccount("https://collaboration.adobelivecycle.com/rkcloud");

Do you have the SSL module loaded/enabled in PHP ?
Call the "phpinfo()" function in a PHP page and check that the SSL module is correctly configured. You should see something similar to the following messages:
Registered Stream Socket Transports
tcp, udp, unix, udg, ssl, sslv3, sslv2, tls
Loaded Modules
core prefork http_core mod_so mod_auth_basic mod_auth_digest mod_authn_file mod_authn_alias mod_authn_anon mod_authn_dbm mod_authn_default mod_authz_host mod_authz_user mod_authz_owner mod_authz_groupfile mod_authz_dbm mod_authz_default util_ldap mod_authnz_ldap mod_include mod_log_config mod_logio mod_env mod_ext_filter mod_mime_magic mod_expires mod_deflate mod_headers mod_usertrack mod_setenvif mod_mime mod_dav mod_status mod_autoindex mod_info mod_dav_fs mod_vhost_alias mod_negotiation mod_dir mod_actions mod_speling mod_userdir mod_alias mod_rewrite mod_proxy mod_proxy_balancer mod_proxy_ftp mod_proxy_http mod_proxy_connect mod_cache mod_suexec mod_disk_cache mod_file_cache mod_mem_cache mod_cgi mod_php5 mod_ssl
curl
CURL support
enabled
CURL Information
libcurl/7.15.5 OpenSSL/0.9.8b zlib/1.2.3 libidn/0.6.5
openssl
OpenSSL support
enabled
OpenSSL Version
OpenSSL 0.9.8b 04 May 2006
Also check your error_log file in the Apache log directory: it should give you more information of what the real cause of the problem is.

Connection failed is a failed error message

In iPhoto, as well as in other software that uses the iPhoto library (e.g. setting a Desptop photo), I get the error message "Connection failed - The server "xxx" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again." There is just one button: OK. Clicking OK causes the dialog to go away – for all of 1.5 seconds! Since it stays ontop of all other windows it effectively renders the computer unusable.
My guess is that I have imported some photo from that server once upon a time, after upgrading to OS 10.6, and that the iPhoto library routines keep looking for that server any time the database is opened. There is no way to tell it not to. There is no way to find out which photo is the culprit. There is no way to avaid making the mistake in the first place, since I didn't get a warning to move the photo to my harddisk first (if that is what the problem consists of, as I suspect).
In other words, this is a poorly designed software, and it needs to be FIXED A.S.A.P. It's aboslutely damaging for Apple every day this bug remains in the OS. Just fix it and fix it now.
The fix must (1) include dialog that explains to user what will happen during import and the consequences of user's choice, (2) include possibility to IGNORE future connection failed in the present session, (3) include way to search for files on remote servers and (4) option to remove and fix the database so it becomes coherent.

So, if a server isn't available anymore, by your words "You've corrupted the library"...?!
I "imported" several photos from a NAS-drive, and now iPhoto (in combination with iMovie) complains with the "Connection failed" once for every file that references that NAS-drive, which isn't available.
So how can I see which files aren't really "imported" but just "referenced", so that I can delete them? (I.e. alternative 3 and 4 of UE:s suggested fixes.)
PS. I totally agree with UE on his other suggested fixes as well.
iPhoto '09 on Lion

RFC connection failed - When using code created by "GENERATE PHP" button

Hi All,
I can use the saprfc_test.php to login, call a BAPI and return data from SAP. But on the same BAPI screen if I click the generate php button and copy the new .php file into my /htdocs/saprfc folder and execute it the browser it returns with "RFC connection failed"
I am totally stuck, please can anybody help?
Rob.

I needed to specify "MSHOST"=>"", Its strange that this was not neccessary for interactive scripts but the problem is solved

Outlook can't connect with Exchange 2013 after migration from Exchange 2007

<style type="text/css">P { margin-bottom: 0.21cm; }</style>
Hello,
recently we've done a Exchange 2007 sp3 to 2013 sp1. Users can conect perfectly with OWA and with his iphone clients.
But the problem is they can't connect from his Outlook clients (2010, 2013), both internaly and externaly. Always fails with the message: The Connection to Exchange it is not avaliable.... Can't resolve the name of Exchange server.
To try to resolve it we've done:
- Check Outlook anywhere configuration en EAC: it is configure with and external url mail.company.com and internal server.domain.local. The security is the default Negociation, but we've tried all.
- Check the internal dns, there are records for mail.company.com and exchangeserverdomain.local pointing to the exchange local ip. Also there is a public zone company.com with the record mail.caompany.com pointing to the exchange local ip. Also we've made
records autodiscover.company.com and autodiscover.domain.local pointing to the exchange local ip.
- In the public dns from our domain there is the record A and MX pointing our public ip. There aren't any record Autodiscover but we think that the manial conection should work.
Check certificates: we've made a new self-signed certificate including all this internal and external domains and for all services.
- Check Outlook Anywhere block: we've cheked.
Currently server state:
- Old Exchange 07 server can't start, it was in very bad state and we achieved migrate the mailbox to the new server, after that we tried to uninstall, but it crashes with a public folder replication error. We got uninstall all the roles
unless the mailbox. After a restart it can't start.
-The new Exchange 2013 looks great, there isn't any trail of the old server, or we haven't seen anything in the EAC or shell.
I paste below the result of Microsoft Remote conectivity analaizer, with Outlook anywhere test. It is clear that there is a problem with that.
Sorry because the test is in spanish and I translated it with google, from here I only can access the tool in spanish.
We continue to try to resolve the problem.
Thanks to all in advance!
Testing RPC / HTTP connectivity.
Error in testing RPC / HTTP.
additional Details
Elapsed time: 24295 ms.
Test steps
Connectivity Analyzer Microsoft is trying to test Autodiscover for [email protected] .
Error in automatic detection test .
additional Details
Elapsed time: 24294 ms.
Test steps
Attempting each method of contacting the Autodiscover service .
Failed to properly contact the Autodiscover service using all methods.
additional Details
Elapsed time: 24294 ms.
Test steps
Trying to prove possible Autodiscover URL https://empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 1509 ms.
Test steps
Attempting to resolve the host name in DNS empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 80.36.252.194
Elapsed time: 507 ms.
Testing TCP port 443 on the host to ensure empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 464 ms.
Testing the SSL certificate to make sure it is valid.
The SSL certificate is not exceeded one or more certificate validation checks .
additional Details
Elapsed time: 537 ms.
Test steps
Connectivity Analyzer Microsoft is attempting to obtain the SSL certificate from remote server on port 443 empresa.com .
Connectivity Analyzer Microsoft successfully obtained the remote SSL certificate.
additional Details
Remote Certificate Subject : CN = mail.empresa.com , issuer : CN = mail.empresa.com .
Elapsed time: 454 ms.
Validating the certificate name .
The certificate name was validated successfully .
additional Details
Hostname empresa.com was found at the entrance of the alternative subject name of the certificate.
Elapsed time: 1 ms.
Is validating the trusted certificate .
Validation Error trusted certificate.
Test steps
Connectivity Analyzer Microsoft is trying to build certificate chains for certificate CN = mail.empresa.com .
Could not build a certificate chain for the certificate.
Tell me more about this issue and how to resolve
additional Details
The certificate chain did not end in a trusted root . Root = CN = mail.empresa.com
Elapsed time: 31 ms.
Trying to prove possible Autodiscover URL https://autodiscover.empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 21723 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 498 ms.
Testing TCP port 443 on the host to ensure autodiscover.empresa.com listening or is open.
The specified port is blocked , not listening or does not generate the expected response .
Tell me more about this issue and how to resolve
additional Details
Network Error communicating with the remote host.
Elapsed time: 21224 ms.
Attempting to contact the Autodiscover service with the HTTP redirect method .
Error when trying to contact the Autodiscover HTTP redirect method .
additional Details
Elapsed time: 606 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 14 ms .
Testing TCP port 80 on the host to ensure autodiscover.empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 202 ms.
Connectivity Analyzer Microsoft is checking the automatic detection of host empresa.com for an HTTP redirect to the Autodiscover service.
Connectivity Analyzer Microsoft could not get a HTTP redirect response for Autodiscover .
additional Details
Web exception occurred because an HTTP 404 response was received - Unknown NotFound . Headers received: Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27:58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 +
lenny3 with Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3 HTTP Response Headers : Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27: 58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 + lenny3 with
Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3
Elapsed time: 388 ms.
Attempting to contact the Autodiscover service using the method of DNS SRV redirect server.
Connectivity Analyzer Microsoft could not contact the Autodiscover service using the DNS SRV redirect method .
additional Details
Elapsed time: 186 ms.
Test steps
Trying to find the SRV record in DNS _autodiscover._tcp.empresa.com .
Not the Autodiscover SRV record in DNS found .
Tell me more about this issue and how to resolve
additional Details
Elapsed time: 186 ms.
Checking for a CNAME record for Autodiscover in DNS for your domain " empresa.com " to Office 365.
Could not validate the Autodiscover CNAME record in DNS. If your mailbox is not in Office 365 , you can ignore this warning.
Tell me more about this issue and how to resolve
additional Details
No Autodiscover CNAME record for your domain ' empresa.com ' .
Elapsed time: 268 ms.
jspt

Hello,
We have the Self-signed certificate that comes with Exchange, and we've created a new self-signed including all our domains mail.company.com, domain.local, exchange13.domain.local, autodiscover.company.com, autodiscover.domain.local.
below I print you the result os the comand Get-ClientAccesServer | fl . Now we've configured a SPC objetct folow the instructions of Wizard
Exchange Server Deployment from Microsoft. We've executed the commands in our new Exchange 13, but can't did it in the old Exchange:
$AutodiscoverHostName = "autodiscover.contoso.com"Get-ExchangeServer | Where {($_.AdminDisplayVersion -Like "Version 8*") -And ($_.ServerRole -Like "*ClientAccess*")} | Set-ClientAccessServer -AutoDiscoverServiceInternalUri https://$AutodiscoverHostName/Autodiscover/Autodiscover.xmlThis is the result of
RunspaceId                           : 89c86f8e-d156-4480-b31d-59215976879b
Name                                 : EXCHANGE13
Fqdn                                 : EXCHANGE13.domain.local
ClientAccessArray                    :
OutlookAnywhereEnabled               : True
AutoDiscoverServiceCN                : EXCHANGE13
AutoDiscoverServiceClassName         : ms-Exchange-AutoDiscover-Service
AutoDiscoverServiceInternalUri       : https://autodiscover.company.com/Autodiscover/Autodiscover.xml
AutoDiscoverServiceGuid              : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
AutoDiscoverSiteScope                : {Nombre-predeterminado-primer-sitio}
AlternateServiceAccountConfiguration :
IsOutOfService                       : False
WorkloadManagementPolicy             : DefaultWorkloadManagementPolicy_15.0.825.0
Identity                             : EXCHANGE13
IsValid                              : True
ExchangeVersion                      : 0.1 (8.0.535.0)
DistinguishedName                    : CN=EXCHANGE13,CN=Servers,CN=Exchange Administrative Group
                                       (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=First Organization,CN=Microsoft
                                       Exchange,CN=Services,CN=Configuration,DC=domain,DC=local
Guid                                 : e83055fe-217b-4ed6-9cd0-7711097baf99
ObjectCategory                       : domain.local/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass                          : {top, server, msExchExchangeServer}
WhenChanged                          : 09/03/2014 12:46:07
WhenCreated                          : 08/03/2014 19:15:54
WhenChangedUTC                       : 09/03/2014 11:46:07
WhenCreatedUTC                       : 08/03/2014 18:15:54
OrganizationId                       :
OriginatingServer                    : severdc.domain.local
ObjectState                          : Unchanged
I hope this stuff can help you.
Thanks!!
jspt

Unity Connection 8.5.1ES16.11900-16 upgrade for Single Inbox with Exchange 2007 ?

Hello friends,
I'm currentely running Unity Connection 8.5.1ES16.11900-16.
I would like to use the single inbox feature with Exchange 2007.
It is in the documentation that we need at least Unity Connection 8.5(1) Service Update 1 (UCSInstall_UCOS_8.5.1.11900-21.sgn.iso).
I downloaded, checked MD5 but when searching on the FTP directory it won't accept it (No valid upgrade options were found). Is this a supported upgrade?
Same happens with the localization file in Portuguese that i need to install: uc-locale-pt_PT-8.5.1.1-16.cop.sng ...
Please can you give me some hints about what I may be doing wrong?
Thank you very much and warm regards,
met

Hi Met,
Hope all is well
I think you are hitting this caveat. Although the numbers don't match exactly I'm
pretty sure you will need to wait for an 8.5.1.12xxx.x ES
If the Connection server is running an engineering special with a full Cisco Unified Communications
Operating System version number between 8.5.1.11001-x and 8.5.1.11899-x, do not upgrade the server
to Connection 8.5(1) SU 1 because the upgrade will fail. Instead, upgrade the server with an ES released
after 8.5(1) SU 1 that has a full Unified Communications OS version number of 8.5.1.12xxx.x or later
to get the SU 1 functionality.
http://www.cisco.com/web/software/282074295/44508/851su1cucrm.pdf
Cheers!
Rob

Unity Connection 8.5 single inbox with Exchange 2003 - Access denied

Hi,
I'm using CUCMBE 8.5.1.12900-7 Unrestricted. i'm following Unified Messaging Guide for Cisco Unity Connection Release 8.5 and Later for configuring single inbox. I have successfully setup and tested unified messaging service when I subscribe this service to a particular user and test it, I get following error:
Issue: Failed accessing [email protected] on 192.168.0.10
Recommendations: Some possible reasons for 401: Incorrect service account name or password. Service account password expired. Proper permissions not granted to service account. Exchange mailbox uninitialized.
Details: HTTP status=[401 Unauthorized] diagnostic=[Bad response from server, HTTP code returned: 401] url=[http://192.168.0.10/exchange/
[email protected]] request=[<?xml version="1.0"?> <D:propfind xmlns:D="DAV:" xmlns:fh="urn:schemas:httpmail:" xmlns:h="http://schemas.microsoft.com/repl/"> <D:prop> <fh:msgfolderroot/> </D:prop> </D:propfind> ] response=[<html><head><title>Error</title></head><body>Error: Access is Denied.</body></html>]
I have verified above mentioned recommendations but no such issue exists. Any ideas?

Hi Muhammad,
I am having exactly the same issue in configuring sinlgle inbox with unity connection 8.6 and exchange 2003. I have checked everything but no result. Could you please help in configuring?
Thanks
The validation results for the user unified messaging service account [email protected] with service E2K302 are the following:
Service "E2K302": AuthenticationMode=NTLM [use HTTP] Server=[E2K3-02.chelloit1.local] Type=[Exchange 2003] Username=[chelloit1.local\agokharu]
Failed accessing [email protected] on E2K3-02.chelloit1.local
Some possible reasons for 401: Incorrect service account name or password. Service account password expired. Proper permissions not granted to service account. Exchange mailbox uninitialized.
HTTP status=[401 Unauthorized] diagnostic=[Bad response from server, HTTP code returned: 401] url=[http://E2K3-02.chelloit1.local/exchange/[email protected]] request=[<?xml version="1.0"?> http://schemas.microsoft.com/repl/"> ] response=[ErrorError: Access is Denied.]

Outlook 2013 connection issue with exchange 2013

my exchange 2013 was upgrade from exchange 2010. after the upgrade (migration), i using outlook 2013 connect to exchange 2013. some very
weird issues happened.
when i using auto discovery to create profile and connect to exchange will success. but when i manually create the profilewill failed. the following pic for your reference. (same account, same PC)
please help, thanks lots!!!!

This is what changed in Exchange 2013. It uses RPC or HTTPs (Outlook Anywhere) and uses Server GUID to connect...
"As a result of these architectural changes, there have been some changes to client connectivity. First, RPC is no longer a supported direct access protocol. This means that all Outlook connectivity must take place using RPC over HTTP (also known as
Outlook Anywhere). At first glance, this may seem like a limitation, but it actually has some added benefits. The most obvious benefit is that there is no need to have the RPC client access service on the Client Access server. This results in the reduction
of two namespaces that would normally be required for a site-resilient solution. In addition, there is no longer any requirement to provide affinity for the RPC client access service.
Second, Outlook clients no longer connect to a server FQDN as they have done in all previous versions of Exchange. Outlook uses Autodiscover to create a new connection point comprised of mailbox GUID, @ symbol, and the domain portion of the user’s primary
SMTP address. This simple change results in a near elimination of the unwelcome message of “Your administrator has made a change to your mailbox. Please restart.” Only Outlook 2007 and higher versions are supported with Exchange 2013."
From : What's New in Exchange 2013-
http://technet.microsoft.com/library/jj150540%28EXCHG.150%29.aspx#BKMK_arch
Blog |
Get Your Exchange Powershell Tip of the Day from here

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

BIS on Curve with Exchange, connect fail :(

Similar Messages

Maybe you are looking for