Bit locker and one drive

HI.
I would like to find out what would happen if I were to user the bit-locker to encrypt my drive and all it files but at the same time ,the files that's in my one-drive are synced with 365 and shared among many other users.
When they open their one drive will the file I updated be encrypted forcing them to enter a decryption password as well.
thanks

no
The file encryption is part of the filesystem. When the file is transferred it is sent unencrypted.
MCP/MCSA/MCTS/MCITP

Similar Messages

One 32 bit node and one 64 bit node

I am planning to do a RAC install for learning purposes.
I plan to use the document
http://www.idevelopment.info/data/Oracle/DBA_tips/Oracle10gRAC/CLUSTER_12.shtml
I plan to use
node 1 is a 64 bit desktop
node 2 will be a 32 bit desktop
Is this a problem considering I am using one 32 bit desktop and one 64 bit desktop ?

I haven't done what you are trying, that said; you should be fine as long as the you run 32bit OS on both machines. Your 32bit box will not let you run a 64bit OS, but your 64bit box will let you run 32bit OS. If you already have the hardware, just try it, all you wold be investing is time (IMHO, most ROI for learning). Put 32 bit RHEL/OEL/CentOS on both boxes and try.
Good Luck!

I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank you

Then why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Stream 8 Tablet's free one year Office 365 Personal and One Drive extra spaces

1. How to enable the free one year Office 365 Personal subscription? I can only active the trial one month Office 365 Personal subscription.
2. How to active the additional storage space for One Drive with the purchase of the Stream 8 Tablet?

I called HP local support here in Hong Kong January 2, 2015 around 11:00am, after checked with my settings the HP support person promised to email me the solution/fix.
I have yet receive any such respond from HP support.
I have online chat with Microsoft Office online support, they inform me that the activation key should included in the box of the Stream 8 Tablet.
Mind you that it is against Hong Kong law "The Trade Descriptions Ordinance, Chapter 362" for 'Misleading Advertising'.

BitLocker Does Not Resonding ,I was Doing the Encryption Using Bit Locker and During that Process My Lappy Shut Down,,And Now I am unable to Open That Drive,Only the BitLocker Window is coming and shows me that it is processing ,Please Someone help meOUT

Vikram

Hi，
This is normal, the encryption is still in process, you should wait for some time, see this link
http://technet.microsoft.com/en-us/library/ee449438%28v=ws.10%29.aspx#BKMK_TurnOff
you can also use command to check the BitLocker Status, in the elevated command prompt, type
manage-bde -status (driver letter)
Yolanda Zhu
TechNet Community Support

No Office 2010 64 bit support and printer driver issues

I have been using Adobe Acrobat Pro 8 for about 2.5 years. Whenever I upgrade my laptop I usually upgrade most of the software I use including Adobe Acrobat Pro. This time I didn't see a need so I installed Acrobat Pro 8 again.
When I did, it no longer had integration with my upgraded Microsoft Office 2010. It also had an issue that every time I printed something to the Adobe PDF printer driver, the dialog box to select a filename would show up behind the application I was using (such as Firefox). Then when the PDF was generated and opened for preview, it also ended up behind the application I was printing from.
I chalked these issues up to using a version of Acrobat that came out before Windows 7 and before Office 2010. So I went out and reluctantly purchased the upgrade. All the marketing material said it was compatible with both.
Well, absolutely nothing has changed. It still doesn't work with Office 2010 because I'm using Office 2010 64bit, and still opens the dialogs behind the application I'm printing from. Almost every laptop comes with Windows 7 64bit and using Office 2010 64bit should not be something I can't do just to get support from an Adobe product.
If there is any workaround for the Adobe dialogs coming up behind the application I'm trying to print from, I'd love to hear it. I would have happily asked Adobe for a solution but I guess they don't offer any type of email support, chat support, or phone support unless you pay through the nose. Or maybe I just didn't see any way after clicking through all the screens under Help on their website.

For 7.0 and 7.5 it will not be supported. It will be supported for BPC 10.
Regards
Sorin Radulescu

My phone is locked and one the password key is not working

one of the key of my passeword is not working threfore i cant open my phone.what can i do

Restore your iphone

Bit locker Mutliple Drives Mutliple OS's

I have a laptop with two hard drive in it. The primary has Windows 7 Enterprise and is a member of the corporate domain. The secondary has Server 2008 R2 and is a member of the lab domain. There is no trust or association between domain.
The laptop does the Windows multi-boot off the primary drive. I want to enable bit locker to secure the drives.
If the two windows environments were exclusively separate, setting up bit locker on each drive independently would be pretty straight forward, but when I'm in one OS, I will frequently need to get files and data from the other drive (and no, making each
drive big enough to hold all it's own data is not an option, plus the synchronization headache). Both drives will need to be bit locked to their respective OS, but the other drive will need to be accessible.
And not to make things too easy, the secondary drive, which i put in an optical drive bay carrier, routinely gets pulled (not while the system is running, of course) out and popped into a USB case to be used as a library transfer drive.
So....
the Windows 7 drive needs to be natively bit locked. and be accessible when running Windows 2008 from the second drive.
the Windows 2008 R2 drive needs to be natively bit locked, and be accessible when running Windows 7 from the first drive, and be accessible when run as a stand-alone USB drive on another system.
I would appreciate any wisdom you can share to make this all work. And please presume that i know next to nothing about installing and running bit locker, because that's pretty much true.
Let me know if you need more information about my configuration.
Thanks

Hi,
"and be accessible when run as a stand-alone USB drive on another system."
Firstly, if you enable bitlocker for one drive, it will be encrypted always until you decrypt it. Thus after you insert it to any system, it need to enter the credential to access it.
And then, if you want to access one drive in another computer, you need to get the shared permission. After you' re granted the sufficient permission, you could access it no matter if it's encrypted. Of course, another computer must be started.
Karen Hu
TechNet Community Support

Bit Locker Recovery key lost

hi,
i recently formated my system. i lost my bit locker recovery key.
how to remove bit locker to the drive.
i tried these....
C:\Windows\System32>manage-bde -status J:
BitLocker Drive Encryption: Configuration Tool version 6.1.7600
Copyright (C) Microsoft Corporation. All rights reserved.
Volume J: [Label Unknown]
[Data Volume]
Size: Unknown GB
BitLocker Version: Windows 7
Conversion Status: Unknown
Percentage Encrypted: Unknown%
Encryption Method: AES 128 with Diffuser
Protection Status: Unknown
Lock Status: Locked
Identification Field: Unknown
Automatic Unlock: Disabled
Key Protectors:
Numerical Password
External Key
External Key
C:\Windows\System32>manage-bde -protectors j: -get
BitLocker Drive Encryption: Configuration Tool version 6.1.7600
Copyright (C) Microsoft Corporation. All rights reserved.
Volume J: [Label Unknown]
All Key Protectors
Numerical Password:
ID: {CA7EA469-38CE-4E7E-814D-292A06DF8819}
External Key:
ID: {D70EAC47-DEBB-480A-BFFC-E74479BDDBC1}
External Key File Name:
D70EAC47-DEBB-480A-BFFC-E74479BDDBC1.BEK
External Key:
ID: {2BD85A61-C76F-4433-8DE6-48651047AF6C}
External Key File Name:
2BD85A61-C76F-4433-8DE6-48651047AF6C.BEK
C:\Windows\System32>
how to solve these. help me

Hi，
If you lost recovery key and are unable to access the disk at this moment, then I'm sorry but I have to say that you're lost. If the data in that encrypted drive is very important for you, then you might need a data recovery center to help you.
Yolanda Zhu
TechNet Community Support

Bit locker paused in between

sir,
i am using bit locker for external drive and it is paused in between , and it is not resume it shows device is not ready.
it show format the disk.
please tell me how to fix it without formating error code is x80070015

Hi,
Please re-mount this drive, and then try the following:
Firstly using manage-bde -status command to identifies whether or not it's BitLocker-protected and the current encryption status.
If it's protected, using Manage-bde: off command to decrypt the drive and turns off BitLocker. All key protectors are removed when decryption is complete.
After that, using Manage-bde: on command to encrypts the drive and turns on BitLocker again.
If it's not protected, using Manage-bde: resume command to resume encryption.
Karen Hu
TechNet Community Support

BIT Locker Key is not working in a first attempt.

I have enabled bit locker key for my system. when I restart the system it will ask for bit locker and like how many time I enter the password it won't work and says wrong key. My friend suggested a temporary solution which is working. I have remove
keyboard before booting. after booting I have to plugin the keyboard and now the bit locker key works. I am not able find the problem. Please help.
OS : Windows 7 enterprise edition 32bit
Mallik K

Hi,
What's the type of your computer? Desktop or Laptop? Have you tried to use other keyboard to test this problem.
As In my opinion, Since it shows password input error, it should not Bitlocker encrypt problem. Maybe system couldn't identify the character you typed, maybe it is keyboard or its driver problem. It would be better to change another keyboard to check this
problem for test.
Roger Lu
TechNet Community Support

Bit-Locker Repair BDE Image Problem

So Executed Bit-Locker and output it in a image, now I'm doing this for weeks now because there are problems and research and I came in a dead end.
Unfortunately the log is not save :( so I don't have anything to show
but here is the deal around 25% it says error can'r read sector but it still running and still reading some blocks
then after 1 week (Yeah that long) it says 100% with an image file it produce, then when I open image file (Winrar,Explorer,UltraISO) it says it is corrupted. Then a little of my sould just died, after weeks of trying and research this happend :(
What should i do? is there someway I can open the conents of IMG?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Question on Bit Locker & IBM Client Security Solution CSS.

Since both Bit Locker and CSS use the TPM chip to store the key, can they both be used at the same time?

I can, idzham, but where do I find the .exe file for reinstalling it? Losing that key, and being completely locked out of my machine, concerns me.

I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
(Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.)

FORMAT WINDOWS 7(64) BY MISTAKEN NOW HOW I RECOVER ERASED DATA WHICH I HAD LOCKED DRIVE BY BIT LOCKER

i'm using windows 7 (64 bit) but experiment to install mac on my PC (i 5-4 GB ddr 3-500sata sea gate).by mistaken its format my whole hard drive which is 500 GB sea gate sata.after this i'm confused and install windows 8.1 and then again i had install windows
7 (64 bit) now after 2 time partition erased i'm trying to recover my data 50 percent data but which drive i had locked with windows 7 bit locker it cant recover any thing I've remember its password.
any one help me to get back my data from this locked drive ?

RB
If the drive was both formatted and bit locked you cannot recover your data.
Wanikiya and Dyami--Team Zigzag

Bit locker and one drive

Similar Messages

Maybe you are looking for