Bit-Locker Repair BDE Image Problem

So Executed Bit-Locker and output it in a image, now I'm doing this for weeks now because there are problems and research and I came in a dead end.
Unfortunately the log is not save :( so I don't have anything to show
but here is the deal around 25% it says error can'r read sector but it still running and still reading some blocks
then after 1 week (Yeah that long) it says 100% with an image file it produce, then when I open image file (Winrar,Explorer,UltraISO) it says it is corrupted. Then a little of my sould just died, after weeks of trying and research this happend :(
What should i do? is there someway I can open the conents of IMG?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

Currpted images & video due to bit locker

i just lost all my images, video when i was removing the bitlocker in windows 8 , when i recover the data its just get currpted plz help me to repair all the images..........

Hi,
The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
Bitlocker-repair (repair-bde) tool
can't repair a drive that failed during the encryption or decryption process.
In addition, could you please explain a bit for what drive you are trying to deal with? external one?
When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
Regarding your scenario, please take a look to see if the following articles could help here:
Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
Best regards
Michael Shao
TechNet Community Support

Problem with recovering data from Bit Locker enabled hard disk with bad sectors

Hi,
I have Lenovo T430 laptop with Windows 7 and Bit Locker enabled hard disk. While working I encountered blue screen error multiple times. After some time, the laptop stopped to boot by itself and started showing error 'A disk read write error has occurred.
Press Ctrl+Alt+Del to restart' message. I tried to connect the hard disk to a different PC as a secondary drive and tried to check the disk to recover the data. The 500 GB disk is showing as unallocated space and I am not sure how to recover the
data from the hard disk. Appreciate your help to recover the data from corrupted hard disk.
I used the Lenovo Diagnostics tools available in BIOS and it showed 48 bad sector errors on the hard disk. I also used Windows 7 CD and tried auto repair but it looks like it didn't do anything.
Thanks in advance!

Hi SenneVL,
Since there are 48 bad sectors on your hard disk, this means the system can not boot any more, the data might not be restored in a normal way, you'd better turn to data restore company for help.
Regards
Wade Liu
TechNet Community Support

I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

montana girl wrote:
I purchased a MacBook AIr Nov. 2011 11" and current OS X 10.7.5. I read that I needed to update to Snow Leopard before I can update to Maverick, ...
Whatever you read was incorrect. You can upgrade directly to Mavericks. It is in the App Store and is free.
Snow Leopard predates the operating system you already have. That's the reason it will not install on your MacBook Air. You spent $20 needlessly for it, but it's yours to resell if you wish.

Bit Locker encription Problem not showing in my control panel

i am using windows 7 64 home premium
in my control panel
Bit
Locker encription driver is not showing
please guide me how i will about how this driver will show in my control panel

BitLocker is not available in Windows 7 Home Premium, you need to be running Windows 7 Enterprise or Ultimate to be able to use BitLocker.
Blogging about Windows for IT pros at
www.theexperienceblog.com

Bit locker drive encryption failed due to power failer and hard disk corrupted

I ran Bitlocker drive ecryption drive D. My pc is windows 7 ultimate, while it was in progress of 1% due to power failer the encryption failed, when power resume the drive didn't showed the file format nor the size but it shows the size in disk management.
It showed like this in My computer
I do Have the recovery code password and back of recovery password so I ran the "manage-bde-_unlock D:-rp[my code ]
and my pc got hang no other option rather than to press the restart button.
then I used commang "repair-bde -force D:I:-rp[my rp] and following info showed but it stucked in 1% about 8 hours, and there was no increase in the pecentage
I also connected the hardisk to mac but all othe partation showed but didn't showed the encrypted one.
I had lots of memorable picture and other backups so any one kindly help me to get out of this problem. Thanks for help

Hi,
The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
Bitlocker-repair (repair-bde) tool
can't repair a drive that failed during the encryption or decryption process.
In addition, could you please explain a bit for what drive you are trying to deal with? external one?
When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
Regarding your scenario, please take a look to see if the following articles could help here:
Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
Best regards
Michael Shao
TechNet Community Support

Data recovering from formatted bit locker encrypted portion.

unfortunately i formatted a partition which is bit locker encrypted having all my valuable documents and data. luckily i have bit locker recovery
key and my decryption password. i use m3 bit locker recovery software to recover my data using my store 48 digit recovery key but it give me error message 'recovery key is not matched' then i try my password, it give error message 'password not
matched' .
using cmd command 'manage-bde -status'
i get the following properties of my partition
C:\Windows\system32>manage-bde -status
BitLocker Drive Encryption: Configuration Tool version 6.1.7601
Copyright (C) Microsoft Corporation. All rights reserved.
Disk volumes that can be protected with
BitLocker Drive Encryption:
Volume D: []
[Data Volume]
Size: 218.81 GB
BitLocker Version: None
Conversion Status: Fully Decrypted
Percentage Encrypted: 0%
Encryption Method: None
Protection Status: Protection Off
Lock Status: Unlocked
Identification Field: None
Automatic Unlock: Disabled
Key Protectors: None Found
i use other data recovery soft wares it give me raw,meta and system file.
please help me in recovering my data.
sorry for unrelated description.

Hi ,
I am afraid that we cannot get the data back if the drive has been formatted even if use the
BitLocker Repair Tool.
You’d better contact your local data recovery center to try to get data back.
Tracy Cai
TechNet Community Support

Pre-Provisioning Bit Locker in MDT 2012 SP1 while using MBAM 2.5 - No Pin Required

Does anyone have some step by step instructions for Pre-Provisioning Bit Locker. Through task sequences, we are currently able to bit locker the computers but it's the last set of tasks. I would like to Bit Locker the computer while no data is on the
disc so it's faster and then as its imaging, the files are already encrypted.
Currently:
Creates BIOS Password
TPM turned on and enabled (using CCTK)
Remove Password
Registry changes
Installing MBAM 2.5
Removing Registry Entries
Any help would be appreciated!
Thanks
Rick

Bitlocker Pre-Provisioning is available by default on MDT Litetouch...
If you just want to pre-provision the drive without letting MDT LiteTouch enable any protectors (let MBAM do that) then just run the following command after the "FOrmat and PArtition" step in the Task Sequence:
x:\windows\system32\Manage-BDE.exe c: -used
(OR whatever drive letter OS exists on in WinPE)
AS an alternative, I would add a step just before the "ENable Bitlocker (offline)" step in the task sequence:
    BDEInstallSuppress=NO
    isBDE=YES
then after the "Enable Bitlocker (offline)" step in the Task Sequence, I would set the following:
    isBDE=NO
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Bit Locker Recovery key lost

hi,
i recently formated my system. i lost my bit locker recovery key.
how to remove bit locker to the drive.
i tried these....
C:\Windows\System32>manage-bde -status J:
BitLocker Drive Encryption: Configuration Tool version 6.1.7600
Copyright (C) Microsoft Corporation. All rights reserved.
Volume J: [Label Unknown]
[Data Volume]
Size: Unknown GB
BitLocker Version: Windows 7
Conversion Status: Unknown
Percentage Encrypted: Unknown%
Encryption Method: AES 128 with Diffuser
Protection Status: Unknown
Lock Status: Locked
Identification Field: Unknown
Automatic Unlock: Disabled
Key Protectors:
Numerical Password
External Key
External Key
C:\Windows\System32>manage-bde -protectors j: -get
BitLocker Drive Encryption: Configuration Tool version 6.1.7600
Copyright (C) Microsoft Corporation. All rights reserved.
Volume J: [Label Unknown]
All Key Protectors
Numerical Password:
ID: {CA7EA469-38CE-4E7E-814D-292A06DF8819}
External Key:
ID: {D70EAC47-DEBB-480A-BFFC-E74479BDDBC1}
External Key File Name:
D70EAC47-DEBB-480A-BFFC-E74479BDDBC1.BEK
External Key:
ID: {2BD85A61-C76F-4433-8DE6-48651047AF6C}
External Key File Name:
2BD85A61-C76F-4433-8DE6-48651047AF6C.BEK
C:\Windows\System32>
how to solve these. help me

Hi，
If you lost recovery key and are unable to access the disk at this moment, then I'm sorry but I have to say that you're lost. If the data in that encrypted drive is very important for you, then you might need a data recovery center to help you.
Yolanda Zhu
TechNet Community Support

Bit Locker Drive Encryption of Windows Vista

Have just downloaded the Bios Upgrade version 2.2 (QG40 BIOS_W220.exe), but I inadvertently omitted to turn the 'Bit Locker Drive Encryption of Windows Vista' off first, as Toshiba had advised.
Is there any corrections I can make to rectify this omission and ensure the G40 and the software operate correctly?

Thanks for your prompt reply Jeka-Nn. But I have several further questions before going too far with the suggestions as I am not familiar with software modifications.
1. What am I actually trying to do overall by downloading and using the suggested application.? Can you give me some overall picture of what I am trying to do?
2. Does this fix the problem without me having to make choices--is it self sufficient/self-installing?
3. Will it return the system to its correct operational settings before I downloaded the Bios upgrade?
4. I have downloaded the application suggested, but when I try to open the file it sends up a message that reads:
Error; this installer does not contain any compressed files. To create a self extracting installation package (with embedded files) run:
"TrueCrypt Setup.exe" /p
When I press OK, it simply reverts to the downloaded list which has the TrueCrypt v7.0 included, but nothing else happens.
What do I need to do to fully install the application?
5. Are there any other steps /inclusions that I need to make to fully correct my 'stupidity'?
Sorry about all these questions but you can see I am a raw beginner at this work.
With thanks, rons

Bit Locker 48-digit Code Need?

Hello
my external HDD has bit locker
when i remove my windows7 & install new windows8
i can't open my hard, windows need 48-digit code but i have not it
furthermorei have my password but windows don't need my pass
and directly say you forgotten your pass and need 48-digit code
my question is: how enter my password to open HDD without 48-digit code ?
like this:
http://social.technet.microsoft.com/Forums/getfile/389032
thanks a Bunch

http://social.msdn.microsoft.com/Forums/windowsazure/en-US/b42d7e23-a41d-4fc7-a8fb-a441712b2a0d/bit-locker-48digit-code-need?forum=windowsazuresecurity
Your Problem is Already Resolve Same Question You Ask Above Link
Moderator Please Take Any Action
DushYant'

Bit locker paused in between

sir,
i am using bit locker for external drive and it is paused in between , and it is not resume it shows device is not ready.
it show format the disk.
please tell me how to fix it without formating error code is x80070015

Hi,
Please re-mount this drive, and then try the following:
Firstly using manage-bde -status command to identifies whether or not it's BitLocker-protected and the current encryption status.
If it's protected, using Manage-bde: off command to decrypt the drive and turns off BitLocker. All key protectors are removed when decryption is complete.
After that, using Manage-bde: on command to encrypts the drive and turns on BitLocker again.
If it's not protected, using Manage-bde: resume command to resume encryption.
Karen Hu
TechNet Community Support

How to manually backup bit-locker key to AD

Hello,
How can I manually backup bit-locker key to AD for couple of users from my machine. (I do have their ID and key)
I am able to do that by running this command on end user machine, manage-bde.exe -protectors -adbackup c: -id {
but how can I do that my self for the end user.
Thanks in advance

Hi,
If these bitlocker recovery key is store in their local machine. You need to contact and obtain the permission to access their computer to get that file.
Karen Hu
TechNet Community Support

Bit Locker Decrypt

Hai
I am using Windows 7 Enterprise 32 bit Os. I have encrypt my external hdd with bit locker. i am not using this hdd after log time. i for got my bit locker password. my system was formated due to some problem. i have the recovery key but it is not working.
kindly give me any idea for unlock encrypted external hard disk.

the only way to recover data will be using a working recovery key.
http://technet.microsoft.com/en-us/library/ee424308(v=ws.10).aspx
MCP/MCSA/MCTS/MCITP

Bit locker security issues (easy to crack) disk encryption?

Bit locker security issues (easy to crack) disk encryption?
Problem 1: When the PC run I think its too easy to get malicious users (with usb pendrive) or spyware to get the encryption key (fast and easy)
youtube.com/watch?v=0npTlOq6q_0
Problem2:not resistant with bruteforce attacks
youtube.com/watch?v=zvaJxnvbGic
Problem 3: not resistant with boot hacking
Im using DriveCrypt plus pack and searched security issues in bit locker.The bit locker allow you the bruteforce/dic attack easy.I think It would be much safer 1. (I think the keys stored somewhere that is easily read) 2. Do not just be enough password
need a password+file combination to decrypt the disk. DriveCrypt plus pack use a file+password combination if you know the password but you wont have the file you can not decrypt the disk (protect with bruteforce attack).On system boot protected bruteforce
attak you can crash the (boot).If the boot system crash you can not decrypt the disk just the password you need the file+password combination plus to decrypt it. I am not a programmer but I see the BitLocker ( easy security catches to crack the disk encryption).Im
tested DriveCrypt and I can not get the key that easy (Problem 1). I have not tested it in greater depth just trying to (catches to crack software encryption).

Where is your question, sir?
If the question were "is it easy to crack", the answer is "no". Your videos make use of several assumptions and ingredients and permissions that a normal attacker does not have.
"Problem 3" is not clear, please describe what scenario you are talking about.

Bit-Locker Repair BDE Image Problem

Similar Messages

Maybe you are looking for