BITC of the source timecode for playout
Hi,
I was wondering if there was a way in FCP 5 to play out a quicktime file which has BITC of the source timecode so that I can use it to double check with a conform that I will be doing on another system.
I don't know FCP very well so any help you guys may have would be greatfully appreciated. Im not getting handed the laptop with the offline edit until the director returns to the UK on Wednesday so I can't have a play around with it at the moment and am trying to get solutions sorted in my head before that.
All the best,
Ian
You can use a filter/generator on the clips that will super their original timecode... then export that as a QT movie.
It's in the video effects, video filters/ video submenu. TC reader...
Jerry
Similar Messages
-
How to change the source type for a primary key on a form?
Hi,
At the time of creating a form, I had set the source type for the primary key to an existing sequence.
Now I want to change the source to a trigger.
Can anyone suggest how to do it?
Thanks in advance,
AnnieAnnie:
Define the trigger and then delete the page process named 'Get PK'
Varad -
I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
JeyanHi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer -
How to view the source code for Native Method
hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nikBuy/acquire a C/C++/assembly code disassembler and run the shared library through it.
-
Folio Builder: An error has occurred opening the source file for the article layout.
I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=trueQuestions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps -
Need to find the source code for java.util.LinkedList
Hello all,
I'm new to the forums and I actually need the LinkedList source file as well as all the source files for all Java packages and libraries. Please post a link here if you can, or email me at [email protected]
Thanks again!
copter_manBut those must be platform dependant, not really that
interesting to look at. I have never felt any need to
look at those at least.Wake up and smell the coffee, abbie! I read the source code all the time and constantly tell my students to do that, too.
1. Java source code is not platform dependent. The original poster wanted to look at linked list code, how could that be platform dependent?
2. It is the implementation of the SDK APIs, so by definition it is implementation dependent code, liable to change in a later version. So don't assume anything beyond what is claimed in the API documentation. However, sometimes the documentation is incomplete or ambiguous to you, and reading the source can provide some insight, however implementation dependent. (Light a candle or curse the darkness.)
3. Why read source code? It's a good way to learn how to program. You see something in the API and ask: how'd they do that? Or you realize you want to do something broadly similar, but you can't reuse the source code.
For example, Images are not Serializable, but suppose you want a small image that is part of an object to be serialized with the rest of the object without too much fuss (ie, without using javax.imageio). You notice ImageIcon is serializable, so you use it. (An ImageIcon has-an Image.) Then you wonder: how'd they do that? You read the source and then you know.
You live, you learn,
Nax -
Endpoint Protection error: The source folder for content does not exist.
I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
I just recently started seeing that my Endpoint Deployment Package has Failed. I click on "Content Status" and select the Endpoint package (which again shows Failed). I click on "View Status" and I get this
message in the "Error" tab:
The source folder for content does not exist.
The Asset Details point to the exact location that does not exist:
The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist.
I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
shared and is populated with a lot of other folders.
Is this possibly just a bad update file? Should I manually create that sub-folder that it says is missing?
Any help would be great! Thanks!Thanks for the quick reply, Torsten. (I often forget which logs to check for certain things).
There are six lines (3 errors -- in italics below) in the log around the same time frame. They read:
The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM
5920 (0x1720)
STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063" SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
Failed to take snapshot of one or more contents in package PDC00063 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063" SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
Failed to process package PDC00063 after 33 retries, will retry 67 more times SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:47 AM 5920 (0x1720) -
Can you share the source code for Customer ToughDay stress test tool?
Hello,
I would like to try Customer ToughDay tool (http://dev.day.com/docs/en/cq/current/testing/tough-day.html) for load testing of our author instances of CQ5. While I am able to execute the application, the logging with log4j seems to be configured incorrectly.
Can you share the source code for toughday-5.5.jar? I think it can be a very good starting point for those of us who are new to CQ5 and need to load test it.
Thank you!Hi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer -
Logon Error:Could not retrieve the source file for Port "Main"
Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciatedHi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
<Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
<Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
<Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated -
How do I see the source code for 'NI Example Finder'?
At the LabView Express demo, the rep showed us how to view the source code for 'NI Example Finder' (started with Help, Find Examples...). Please refresh my memory.
--toddThere are a couple of VI's that shipped with LabView 7.0, but you can't see the diagrams.
C:\Program Files\National Instruments\LabVIEW 7.0\resource\system\HelpServer.llb\Run Example Finder__NATIONAL INSTRUMENTS.vi
Press Ctrl-E on this VI and it prompts you for a password.
This VI is run by C:\Program Files\National Instruments\LabVIEW 7.0\resource\system\HelpServer.llb\HelpServer__NATIONAL INSTRUMENTS.vi
There's also C:\Program Files\National Instruments\LabVIEW 7.0\help\_exfinder.llb\Example Finder Launcher.vi.
Tyring to open this VI starts the NI Example Finder. Note the taskbar icon which is different from the normal VI icon.
It seems like NI is trying to keep us out, even if it used LabView to develop the Example Finder. -
Where can I get the source code for sun classes?
Hello,
When ever you download sun's j2sdk, the archive always contains the source code for the entire sdk in a zip file called src.zip except the sun.xxx classes like sun.awt.print.PrintDialog or sun.awt.font.FontResolver.
For debugging purposes I need, if availabe, the source code of these classes which are not present in the src.zip.
Please can someone tell me if theses classes are available as source and can point me where I can find it cause I am searching for it but can't find it on the net.
Thank you
CarolinHey ChuckBing
And your way is the only way, right? No.What on earth is eating you? Highly sensitive today?
Where is the problem? There are two solutions of the question.
The one link I posted points directly to the sun source download link. The "readme" explains, yippie, the sun sources are contained. Easy, isn't it?
With the other one, you have to navigate at least through two other pages before you might find the link and only if you recognize that "Download JDK 5.0 source via SCSL/JRL" means the sun source code and not the sources contained in the JDK download. This is what I thought as I've seen this link the first time. Unfortunately there is no "readme".
I prefer the easy way, I dont want to earn a doctorate. Ok, you can say dont "play the woman", but I'm a woman and a blonde too;-)
But, let us stop the idle discussion here, please!
Nevertheless, thanks to you and [email protected] for answering. -
What is the source table for repository browser info?
Hi guys,
I need to create report for everyday's data refresh, mostly like what repository browser does. So what is the source table for repository browser info? I am in OWB 10gR2. Thanks a lot.I believe the runtime audit browser uses the views that start with "RAB" in the control center.
But it would probably better if you used the Audit Execution views. More information can be found in the "API and Scripting Reference" document...
http://download.oracle.com/docs/cd/B31080_01/doc/owb.102/b28225/api_2runviews.htm
In order to get access to the Public views from SQL Plus using a schema other than the control center, I believe you need to grant the ACCESS_PUBLICVIEW_BROWSER sys privilege to each OWB user. Look at Note:434718.1 for more information. -
Good, I wanted to know where to find the source files for examples of FLASH programming manual with Adobe ActionScript 3.0 (flash_as3_programming.pdf), each sample has a link that had to change and send me the Adobe Developer Center. Thanks,.
Hi,
I had the same problems with the samples. But I got different message. but, instead of typing "ant build", I entered only "ant" on the prompt and I was able to built it.
So, in the comamnd prompt goto your example directory and enter only ant .
The ant will read the build.xml file and you should be able to get it.
bye -
Cannot start the source application for this object - Embedded PDF in Excel 2007
I am having a real issue which unfortunately is intermittant and I cannot pinpoint what is causing the problem. Basically I am inserting a PDF object into an Excel worksheet and immediately after I insert it, it will open fine. If you click off into another cell and save the sheet, then try to reopen the embedded PDF, you get the error "cannot start the source application for this object".
Any help would be very much appreciated! Has anyone else run into this?I got that problem with one of my client after updating from Adobe Reader 8.2 to 9.3.1. Excel version was 2002 and not 2007 but this is Adobe problem.
Check that registry key for you Acrobat Document key points to right AcroRead32.exe path at HKEY_CLASSES_ROOT\CLSID\{B801CA65-A1FC-11D0-85AD-444553540000}\LocalServer32
of whatever key points to your Acrobat Document.
I used Sysinternals Procmon to monitor registry activity and found a line and opened that registry location and found out Adobe Reader 8.0 path there.
9:55:56,9021789 EXCEL.EXE 3236 RegOpenKey HKCR\CLSID\{B801CA65-A1FC-11D0-85AD-444553540000}\LocalServer32 SUCCESS Desired Access: Maximum Allowed
I have seen that Adobe Reader 9.3 doesn't update that registry and leaves Adobe Reader 8.0 values there. Same problem may be in other upgrade scenarios too.
In addition to that my Windows 7 with Office 2007 that has never had anything but Adobe Reader 9.x versions didn't had anything on that registry location and it gave me same "cannot start the source application for this object" error. Putting that path "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe" to LocalSever Default value fixed that too. Maybe Adobe should do something with this issue? -
Does anybody have the source code for playing video..?
Hi i am new to J2ME. Does any body have the source code for playing video?
The WTK includes a video player example. I would start by looking there. In addtion SE and Nokia (if I remember correctly) both have video examples on their developer web sites.
The developer sites are
http://forum.nokia.com
http://developer.sonyericsson.com
For some of my midlets I use a utility class. You can view the source here:
http://hostj2me.cliqcafe.com/www/forumtopicview.html?fid=46&categoryId=36&fpn=0
Works for my needs;
Maybe you are looking for
-
I had to restore my iPhone, but my apps from the app store are now missing. However, they are still backed up on my PC. I tried synching, but no luck. Any ideas??
-
Use embedded .swf to hide/show a button
Captivate 4 Flash CS4 ActionScript 2.0 Afternoon Fellow Captivators!! okay - so here's the thing, I have a custom interaction that i have built in Flash. I want to force the user to go through this entire interaction before proceeding to the next sl
-
Only first row of dynamic table saves to pdf
Please help me with this. I have a dynamic table in an xdp that can grow by adding rows (called details). This appears to work in the browser, when I edit. However, when I save to pdf, only the top row saves. Any idea why the entire table is not
-
Error While Creating PAS Procedure
Dear Friends I am getting following error while creating PAS procedure. I login using Admin Access to Database Admin.EWK Denied by the Operating System What might be the reason for this error? Rgds SriG
-
Export progress bar shows, but no SWF appears
Hello all, i've been through tech support and about 100 different sites with this issue but nothing seems to help. I'm using windows Vista 64 bit (work machine, not personal) with Adobe CS5 production premium. I have this training I created in flash