BitLocker AutoUnlock second drive (after creating a new OS drive image and then encrypting)

Hi
Sorry, not sure which forum to put this question in, so I pick the Security.
I have a question about the Bit Locker autounlock.
I have been using BitLocker on Win7 and Win2008. The autounlock has worked fine. I have two separate disks (c:\ and e:\). Using one USB I can unlock the c:\ and then it will auto unlock the second disk. No problems.
However, I had to create a new OS image, and then re encrypt the c:\ (OS drive). I used the same USB. When the computer boots up, I can manually unlock the e:\, but it will not let me autounlock the e:\. I keep getting the "element
not found" message.
Any help would be appreciative.
Thanks

Thank you for your reply...but that was not what I was looking for.
I understand, and have setup, how to auto unlock the second drive. My question is, does the second disk have to be present when the OS drive is encrypting? Scenario:
Set 1:
Original OS Drive (OOD) - already encrypted
Original Second Drive (OSD) - already encrypted and auto unlocked.
Set 2:
New OS Drive (NOD) - encrypted
Original Second Drive (OSD) - encrypted previously and auto unlocked.
Using Set 2, I have encrypted the NOD, and was able to auto unlock the OSD while it was present. However, since I have multiple OSD's, I then inserted another OSD with the NOD. I am able to unlock this drive, but not able to auto unlock it.
I get the dreaded "Element not Found" message. I am assuming that when the OS drive is encrypting, it somehow attaches to the OSD....therefore it can auto unlock it. If I add another OSD, it will not be able to auto unlock it.
Hope this makes sense. Thanks again.

Similar Messages

After creating a 10.4.7 image on eitgher a G5 or a MBP

After creating a 10.4.7 image and restoring it on either a G5 or a MBP what now shows up under the hard drive is alias's for etc,tmp and var..what is causeing this.?? I have used a app called XRAy to make them invisable to the user. but just not sure whats causeing this issue..
thanks
Lisa

Sounds like you used Disk Utility to make your "clones" (not images), right? Here is the cure:
Here's how to make a /.hidden file. This only works for admin users.
1. Open the Terminal.
2. Type "pico /.hidden" without the quotation marks.
3. Type the names of the file/folder you want hidden.
The resulting list should have one name per line.
4. Hit Control-O then the Return key to save /.hidden.
5. Hit Control-X to Exit.
6. Type "sudo chmod a=r /.hidden" without quotes.
7. Enter password if asked.
8. Type "sudo chown root:wheel /.hidden" without quotes.
9. Quit Terminal.
10. Restart the Computer.

Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

I cannot access an older time machine backup after installing an new hard drive.

After installing a new hard drive I tried to access my older backups in time machine but cannot. They are there but do not light up and allow me to access them, or select them.

First, if you're worried about the possibility of losing a backup set, then your backup strategy is inadequate. You will certainly lose those backups, no matter what you do, when the drive hosting them fails, as it will eventually. If you take data safety seriously, you should have at least two complete, independent backups of all your data, one of which is off-site at all times. I suggest you make a second backup now, before doing anything else.
The action I suggested won't delete all the snapshots; only the selected one -- unless something goes wrong, which is always possible. Without adequate backups, nothing you do is safe.

How do I create a new startup drive?

Once I get a larger drive installed to replace the 80 GB drive that came with my G5, what is the safest way to create the new startup drive?

Gi-
The best way to get going on a new drive is, after formatting the drive with Disk Utility, download SuperDuper and clone the old drive to the new drive.
The free version is excellent, and totally reliable,
The paid version makes keeping backup clones easy.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

HT4942 After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Mac OSX, 10.7.5, LR 5.6 After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it. Why is it doing this?

Mac OSX, 10.7.5, LR 5.6 After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it. Why is it doing this?

I am experiencing Mavericks failing to copy subdirectories from usb sticks, I am backing up game saves from a console. Both sticks I use are fine, same permissions of course since the console wrote the files. Sometimes it copies, sometimes it doesn't. It seems to be related to the mounting process.
Thank God Apple hasn't (yet) broken bash.

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format

After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

You have two separate questions here...
To get all your music into one playlist, select Music in the sidebar and click the Songs view at the top. Then, highlight all the songs and drag them into your playlist.
I don't know if it's possible to download all Purchased content (or do you mean iTunes Match content?) at once; try a few Google searches.

After installing a new hard drive can I install snow leopard directly from snow leopard disc

After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Any event which is raised when we save Purchase order after creating a new?

Hi
I need to know any event which is raised whenever we save a purchase order after creating a new one. I know event 'change' of object type BUS2012 is raised whenever we change a PO. Please help in this regard.
Regards
Swetabh

Create event doesnt exist in BUS2012.check if custom business object exists for this by using 'where used list',probably it may have created event.

Setting up time machine/time capsule after fitting a New Hard Drive.

I have replaced my hard drive in my imac 24inch and restored the system from my time capsule. My question is now my time machine is trying to back up to my time capsule but it is already 3/4 full from the old drive in my imac. How do i best set up my time capsule with time machine after installing a new hard drive in the imac. I was hoping that i would restore the system and I would still be able to (after pointing time machine to my time capsule) access old files if needed in time machine. It has presently deleted a lot of older backups but still cannot fit it all in as it just sees a new hard drive worth of info and is attempting to back it all up on my time capsule.

wjosten wrote:
Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk. However, whenever I swap out a disk I do exactly what you do. CCC to get the ol drive onto a new one. Test by starting up to the new (but still external drive). Then replace the internal drive.
I usually just sell the old drive on eBay. My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me. The price of large external drives is almost the same as smaller internal ones.

Incompatible signature after creating a new Flex mobile project in Flashbuilder 4.6

When I create a new flex mobile project and try to build it right away it gives me this error
1144: Interface method initialize in namespace mx.core:IUIComponent is implemented with an incompatible signature in class utest.
I have tried reinstalling Flash Builder and even upgraded from 4.5 to 4.6 to try and resolve this problem.
I have also tried using different versions of the Adobe Air sdk (I'm currently using Air 3.4).
Here is the projects mxml file, if that helps although it doesnt have anything but the generated code.
utest.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:ViewNavigatorApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                            xmlns:s="library://ns.adobe.com/flex/spark"
                            firstView="views.utestHomeView" applicationDPI="160">
    <fx:Declarations>
        
    </fx:Declarations>
</s:ViewNavigatorApplication>
views.utestHomeView.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark" title="HomeView">
    <fx:Declarations>
        
    </fx:Declarations>
</s:View>
Also I am running Flash Builder 4.6 on Windows 7 32-bit
Thanks in advance for the help
Edit:
I have now tried the flash builder 4.7 trial and even 4.6 on a different machine, both were clean installs, and I have found that when i create a new project it does compile
until I get an error, and this can be any error, then after I fix that error it gives me the same error as before
1144: Interface method initialize in namespace mx.core:IUIComponent is implemented with an incompatible signature in class utest.

Hi Gsaison,
Do you have any progress on these issues? Im working on the same solution right now (SWV + GoogleMaps JS v3 ) I've got some weird issue when i try to spawn a StageWebView inside a View on IOS, it appears inside a scroller and is not open for finger interaction anymore. I use the eskimo framework, but then again, nothing fancy going on there for the rest. I've tried all of the the stage.stageScaleMode options but non of them work. Got any help?
Kind regards,
Roy

BitLocker AutoUnlock second drive (after creating a new OS drive image and then encrypting)

Similar Messages

Maybe you are looking for