Bitlocker Installation Alternate Report Database Port

Attempting to install bitlocker "MBAM Compliance Status" and "MBAM Recovery and Hardware" databases to a remote database server not using the default port 1433. I can not get the installation application to recognize the SQL Server
Instance. Tried different syntax strings to include a port number, but nothing seems to work.  Is using a non-default port not possible with a bitlocker?

Hi Joe,
To configure the Compliance and Audit Database,
you must add an exception on the Compliance and Audit Database computer to enable inbound traffic on the Microsoft SQL Server port. The default port number is 1433.
To configure the Recovery Database,
You must add an exception on the Recovery Database computer to enable inbound traffic on the Microsoft SQL Server port. The default port number is 1433.
For more details, please refer to following article.
How to Configure the MBAM 2.5 Databases
Based on your description, I understand that you don’t want to use the default port 1433. Please refer to following
articles and check if can help you.
Running
SQL Server ‘Default’ instance on a non-default (or non-standard) TCP port: : tips for making application connectivity work
Configure the Database Engine to Listen on Multiple
TCP Ports
In addition, this issue seems to be more related to MBAM. I suggest that you should post this question in
Microsoft Bitlocker Administration and Monitoring (MBAM) forum. I believe we will get a better assistance there.
If anything I misunderstand or any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Purpose of database port on installation screen?

    What is the purpose of the database port on the ZR5 installation screen?
    It seems to come up before you pick whether you're using ZCM or config file, which I find odd.
    The docs seem to indicate that if you select ZCM config, it'll know about whatever database ZCM is using (ie: external MS SQL or Oracle, etc.)
    But by then you've already set a database port?
    So what should we use for the Database port? Is that the port that our Oracle database is (for ZCM?)
    Or does ZR5 use some other database as well as whatever ZCM is using?
    If the latter, WHERE does this database get installed and what is it used for?
    (this is obviously different than ZRS)
    --Kevin

    Originally Posted by spond
    Kjhurni,
    > What is the purpose of the database port on the ZR5 installation
    > screen?
    for its own database
    > Or does ZR5 use some other database as well as whatever ZCM is using?
    yes, see above
    > If the latter, WHERE does this database get installed and what is it
    > used for?
    on "this" server, and where do you think the reports get stored?
    Shaun Pond
    Thanks Shaun. I was hoping that it would use the External Database, rather than me now having to maintain two separate databases, including one we don't "officially" support from an Enterprise standpoint (our official database we are to use is Oracle 11g R2, and in some cases, MS SQL when necessary).

  • SAP IDES ECC5.0 (SQL 2005 Database) installation Error at  Database instan.

    At the time IDES ECC 5.0 installation (SQL 2005 database), I was copy all DVD on Hard drive and start setup then at installation of database instance, following Errors are occured. so I cant continue with the installation, if anyone have installation guide/or solve the following error please mail me at [email protected]
    from Log file SAPCLUST
    Interface access functions from dynamic library dbmssslib.dll loaded.myCluster
    (3.5.Imp): 613: error when retrieving table description for physical table AABLG.
    myCluster (3.5.Imp): 614: return code received from nametab is 32
    myCluster (3.5.Imp): 296: error when retrieving physical nametab for table AABLG.
    (CNV) ERROR: code page conversion failed
                 rc = 2
    from sappool.log
    Interface access functions from dynamic library dbmssslib.dll loaded.failed to read short nametab of table ARCH_NUM     (rc=32)conversion failed for row 0 of table  VARKEY = ⁘††††††††††††††††††††††††
    (CNV) ERROR: code page conversion failed
    So please send me solution/ or any configuration need for SQL 2005 / installation guide thanks

    This may be hard disk problem, some file not able to write on HDD.
    Regards
    Rajnish

  • TF244069: An error occurred while checking the provisioning status of the reporting database schema for a PWA instance.

    The command TfsAdmin ProjectServer /RegisterPWA causes next error:
    TF244069: An error occurred while checking the provisioning status of the reporting database schema for a PWA instance.
    Project Server returned the following error: "Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized.".
     (type ProvisionException)
    Exception Stack Trace:    at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionPwaDBSchema.HandleSoapException(SoapException soapException, String errorResourceString)
       at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionPwaDBSchema.IsDBSchemaProvisioned()
       at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionManager.Provision()
    I installed SharePoint 2013 and Project Server 2013 as farm and TFS 2012 and my account has permissions everywhere. I read article
    http://msdn.microsoft.com/en-us/library/gg412653.aspx and gave full permissions for TFS account to SQL and Project, Project app pool account to SQL, but still have an error.
    How can I find out what exactly permissions are not enough???

    The problem was in claims authentication. Changed to Windows and all worked out.

  • P6 user name is not valid for connecting to the reporting database

    No data is available because your P6 user name is not valid for connecting to the reporting database
    I am getting above error in the following environment:
    P6 running on wls instance 1.
    BI Publisger running on wls instance 2
    MS SQL server 2005
    Note that the error appears when I clink on the 'Reports' tab in P6. My admin user on P6 has access to report/analyser modules.
    To connect P6 to BI Publisher I am using 'PxRptUser' in the P6 configuration for Bi Publisher. I know as well that the WSDL URL is correct and I can test this in SoapUI tool.
    In BI publisher I have created the PMDB data source using PxRprUser, and the test of this connection works.
    (Because the report samples come with Oracle flavoured SQL that SQL server does not like, I have configured BI Publisher so I have just a single report left that sources it data from an xml file. This works in BI Publisher. It also helps me in that I do not need to add 'WHERE' clauses and parameters required for SQL server?)
    Furthermore, using a DB tool, I can connect to my SQL server using PxRPTUser.
    So why do I get the error above?
    I picked up somewhere that I should not be adding users to BI Publisher. Funny enough, testing the 'login' method the BI Publisher exposes through its WSDL (as above) I noticed I HAD to create the user PxRptUser in BI publisher application itself (on top of PxRptUser in database) for the login web service to work with PxRptUser
    That did not solve the connection between P6 and BI Publisher though. What am I missing ...
    Edited by: user3674522 on 10/11/2011 20:16

    Thought I found something but can't repliacte, som issue is still there:
    Had a look at the wls instance logs where BI publisher is running, and the error I get is:
    111111_023646955][][ERROR] javax.naming.NamingException: Unresolved naming: cn=admin, dc=user, dc=users, dc=principals at [cn=admin]
    That user, admin, is the one I have used to access P6. Why is this passed on to BI Publisher? I thought the idea was that the PxRptUser set in BI Publisher configurations in P6 would be used?
    Edited by: user3674522 on 10/11/2011 20:17

  • Error installing P6 Reporting Database 3.0

    I am a relative noob when it comes to Oracle applications. And my customer has allowed their Oracle support contract to expire, which makes things so very easy....
    I currently have EPPM 8.2 w/Weblogic and OBIEE installed and functional...11.1.1.5....on 2008 R2, with a Solaris backend. I am attempting to install and configure the P6 Reporting Database 3.0. I'm running into errors when running the staretl.bat process for the first time- I believe what is happening is it is trying to pull data into the Star database. It generates the following error:
    *+<12.19.2012 16:50:04> staretl [INFO] (Progress) - Finished Script W_PROJECT_SECURITY_SS.sql+*
    *+<12.19.2012 16:50:10> staretl [INFO] (Message) - Extract2Stage Insert Time for 825327 rows on table W_UDFVALUE_DS is .231 mins (13.85s) at rate 59590.397/s+*
    *+<12.19.2012 16:50:10> staretl [INFO] (Message) - Complete extract on UDFVALUE for table W_UDFVALUE_DS rows=825327+*
    *+<12.19.2012 16:50:10> staretl [INFO] (Message) - Processed 825327 rows in 13.857/s at rate of 59560.294/s+*
    *+<12.19.2012 16:50:10> staretl [INFO] (Progress) - Finished Script W_UDFVALUE_DS.sql+*
    *+<12.19.2012 16:50:10> staretl [ERROR] (Message) - The SQL script W_PROJECT_DS.sql failed+*
    *+<12.19.2012 16:50:10> staretl [ERROR] (Message) - The SQL script W_ACTIVITY_DS.sql failed+*
    *+<12.19.2012 16:50:10> staretl [ERROR] (Message) - The SQL script W_USER_SS.sql failed+*
    *+<12.19.2012 16:50:10> staretl [ERROR] (Message) - The SQL script W_RESOURCE_DS.sql failed+*
    *+<12.19.2012 16:50:10> staretl [ERROR] (Message) - The SQL script W_WBS_DS.sql failed+*
    *+<12.19.2012 16:50:10> staretl [INFO] (Progress) - Step 12/28 Part 2/3 - FAILED (1) (0 hours, 0 minutes, 40 seconds, 16 milliseconds)+*
    I can view those scripts that are referenced, but they don't mean much to me. The info I've posted is from the log files, so you can see how useless it is....when I spool and run one of them individually, to see what the exact errors are, here is what I get:
    SQL> @ W_PROJECT_DS.sql*
    ORA-06512: at "STARUSER.EXTRACT2STAGING", line 74*
    Exception: Error during extract for table W_PROJECT_DS: ORA-00904: "LOCATION_ID": invalid i*
    +(100,PROJECT,W_PROJECT_DS,n/a,n/a)+
    BEGIN*
    +*
    ERROR at line 1:*
    ORA-00904: "LOCATION_ID": invalid identifier*
    ORA-06512: at "STARUSER.EXTRACT2STAGING", line 109*
    ORA-06512: at line 2*
    I don't pretend to know what the error means, or how I might correct it. Anyone have an idea of where I should start looking?

    I have the same issue, but instead of "Location_ID" it claims that the problem is with "LASTUPDATEDATEX" (ORA-00904: invalid identifier). Oracle DB version is 11g, all of the instances (EPPM, ODS, STAR) are hosted on the same server, but are separate instances.
    How does the Multimedia component influence this bug?
    BTW: Reporting DB version is 3.1 - staretl process has 48 instead of 28 in 3.0 steps.
    Edited by: Victor Razumov on 19.03.2013 8:14

  • Project Server 2013 reporting database change in Schema from Project Server 2010

    I have a current Project Server 2010 implementation, I am planning to migrate to Project Online.
    We have Customized Reports that consume from the PS 2010 Reporting DB.
    Are there differences in the Reporting DB schema  between PS 2010 and Project Online?
    My Question is: if we migrated to Project Online, will the reports crash?
    Another question is that, is PS 2013 Reporting DB schema the same as Project Online?

    Hi Atia,
    IN project server 2013 we have only one database instead of 4, it means draft, archive, published and reporting with in one database.Project Server 2013 reporting database schema tool that can be downloaded.
    http://blogs.msdn.com/b/project_programmability/archive/2013/01/28/project-server-2013-reporting-database-rdb-schema-reference.aspx
    There are differences in reporting of on-premises vs. Project Online
    The Project Server 2013 reporting schema includes three new tables, 27 new views, and a total of 33 tables and views that include new fields.
    Answer-1 : Yes there are some differences between PS 2010 and project Online.
    Answer-2 : Reports will crash as In Project Online you have to use ODATA to create report. You can not query project online data for reporting directly you have to have use ODATA. 
    http://msdn.microsoft.com/en-us/library/jj163015.aspx
    Answer-3 : NO, PS 2013 Schema and Project online Schema is different. 
    kirtesh

  • Change report database

    I guys:
    i have a problem when I am trying to change the report database.
    the report is currently using a oracle sql to fetch data into the report. when i try to move it to another database (test envirment) tables' schema name is changed so i basicly want to use another query on the new DB, i use the "database|set datasource location" window put new query in.
    but CR dont let me to. it shows error: "failed to retrive data from database. "
    anyone can help me?
    thanks
    Howard

    You can't if the database tables/fields are not exactly the same as the original report.
    Create a new report and if you want the same feature/functions as the original report then copy paste to the new report.
    Thank you
    Don

  • Task Total Slack Calculated values mismatching with the values in reporting database

    Hi,
    We require 'Task Total Slack' as one of the items in a report for Project Server 2010. We're developing the reports using SSRS wherein the SQL Queries are fired on the reporting database of Project Server 2010.
    We've come across a situation wherein the total slack values from reporting database for tasks are mismatching with the values that are seen in either PWA or Project Professional for total slack field. We also could not find a consistent factor by which
    the slack is multiplied for reflecting in the database in case the Slack in days was being converted into Hours in reporting databse.
    Is there a definite way that these values are being represented in reporting database which is quite different from the way these values are seen in Project Professional? Please help resolving this issue.

    Hi Abhijit PS,
    Can you give an example of the mismatch? Also you could tell us if this is happening for all tasks and all projects. Your concern may be seen from 2 different points of view:
    Either this is indeed a bug with a slack of 2 days for example in Project Pro and 4 days in your report from the reporting DB. In this case, you should check if the projects have been published correctly and if the Reporting DB is correctly sync'ed with
    the draft DB.
    Or it could be the normal behavior and it is just a matter of finding why. For example, the durations are stored in the DB in minutes, meaning that a 1day duration might be stored as 480 if you have 8 working hours in a day (8*60).
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Move SSRS engine to new server, but keep same reporting databases

    We have our SQL Server reporting services (2008 R2) setup as follows:
    ServerA: contains the reporting services engine (including the report manager URL, web service URL and so on).
    ServerB: Is the sql server instance that hosts the reporting databases for ServerA (ReportServer and ReportServerTempDB).
    ServerA is EOL and will be replaced by ServerC. I have two questions:
    1. How do we proceed to install Reporting Services on ServerC so that it points to the databases on ServerB.
    2. How do we migrate the reports (and settings) from ServerA to ServerC.  Will this be automatic by pointing ServerC to the exiting databases on ServerB.
    Thanks.

    Hello,
    All reports / Settings are stored in ReportServer database, so if you Keep your database you have nothing to migrate.
    Install SSRS without configuration on the new machine and afterwards do the configurtaion with Point the "ReportServer" database to ServerB.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • How to report database performance to upper management?

    Hello all. 
    I am looking for a way to report database performance to upper management.  I'll start by giving you an overview of our team structure. I manage a team of various roles: Level 2 support specialists, configuration managers, and DBAs - we are dubbed the
    "Production Support Team".  I report directly to the VP of Software Development who oversees the Design, DEV, and QA, team managers.  This means that our team, Production Support, can be considered a peer team of Design, DEV, and QA. 
    The manager of each team compiles metrics from their team members and reviews them on a weekly basis to ensure we are headed in the right direction.  We then take our metrics, and distill them down into a few key metrics that we then report to the VP
    of Software Development.  Those metrics are easy tom compile for the L2 support roles (number of tickets escalated, number closed, etc.).  However, I've been struggling with how to report DBA performance for a long time.  Every time I start
    to compile numbers, I end up with tons of things that are great for a DBA, but don't mean much to upper management.  Does anyone have any suggestions.  Surely I'm not the only person that has had this issue?
    I'd be happy to provide more info if needed.  Thanks!
    Clint

    are you using an RTF template ?
    in the RTF template you need to use this syntax for the HTML enabled field
    <?html2fo:MOSC_COMMENTS?>
    instead of <?MOSC_COMMENTS?>

  • Understand SQL Server 2008 R2 replication features for a reporting database

    Hi, I am using SQL Server 2008 R2 and working on building a reporting database using transactional push replication and want to know the downside that we should aware of using this.
    For instance, is the data always available to the users even when changes are being written from the publisher?
    I am also interested in learning replication mechanism & internals. How should I proceed?
    Thanks in advance........
    Ione

    >>For instance, is the data always available to the users even when changes are being
    written from the publisher?
    Answer is Yes.
    For more information
    http://www.codeproject.com/Articles/715550/SQL-Server-Replication-Step-by-Step
    --Prashanth

  • Project Server 2010 Reporting database corrupt after Administrative restore of Enterprise Lookup Tables

    Hi Guys
    Prosperous 2014 to all . I am stuck with a Huge issue that I am unable to resolve. I did a PWA Administrative restore the other day to try to recover some fields that was deleted.
    After the restore I got a queue error and since then my reporting database is screwed up. I tried to re-save the lookup tables, fields and views to no avail.
    None of my reports are working and every time I publish I get a reporting queue error on the projects.
    Your urgent help to sort this issue out will be highly appreciated
    Thanks
    Willem

    Hello,
    What was the queue error? Have you tried the restore of custom fields again?
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Database port change in weblogic server

    Hi,
    Please help to acheive the following..
    I want to change the database port in weblogic so that weblogic listens to changed port number.
    Please help me to acheive this.
    Thanks in advance

    952602 wrote:
    that button is in invalid stateMake sure the data source is targeted to a server, go to the tab "Targets" and check the proper server... You should be able to test it as long as you can select a server from the list beneath the button...

  • Where is the Workflow Installation for 10g Database ?

    Hi ,
    Where is the Workflow Installation for 10g Database?
    Thanks!

    http://otn.oracle.com/software/products/workflow/index.html
    Pick your platform.

Maybe you are looking for