Bitlocker not enabled after deployment (Dell systems)

I have been deploying to Dell systems, the TPM chips are active on the machines, these are OOB machines, do the deployment to Enable Bitlocker using TPM Only (SCCM 2012 w/MDT 2012 UDI) but when the machines boot up, it says Bitlocker protection is suspended,
and if I go to turn it on, the Wizard fails to initialize, saying one or more drive protector keys needs to be available, etc.
Not sure what's missing in my task sequence to get Bitlocker to encrypt the drive correctly.

Hi,
Please check smsts.log to find more information.
The following blogs might help you to configure the Task Sequence.
http://blogs.technet.com/b/simonmay/archive/2013/02/05/enable-and-activate-tpm-for-bitlocker-pre-provisioning-in-winpe.aspx
http://en.community.dell.com/techcenter/os-applications/w/wiki/how-to-enable-trusted-platform-module-using-a-configmgr-2007-task-sequence.aspx
(Note: Microsoft provides third-party contact information to help you find technical support. This
contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

AM is not retained after deployed the custom pages

Hi,
I have two custom pages, Create(page1) and Select Jobs(page2) pages.
In Create page I've a button called Populate Jobs, Once I click the populate jobs button it will navigate to another page. In page2 I'll select list of jobs using multiple selection.
Once multiple jobs selected I'm validating those jobs(lines) already added to the page1 when click submit button (available in page2).
Both pages have same AM and I'm retaining AM when I move from page1 to page2. In page 2 if click submit button I try to get all the existing lines which is arendered in page 1.
But i'm getting zero count but records are there. It is working very fine in my machine before deployment. But the AM is not retained after deployed to apps.
Details:
OA Extension
10.1.3 (Build OAEXT_MAIN_NT_100429.1954.1314)
My Jdev Version
10.1.3.3.0
EBS - OA Framework
12.1.3
EBS- Oracle OA Extension
10.1.3 - build 1313
please suggest me do I need to check any profile option to set AM State or any other solution for this.
Thanks in advance,
SAN

Hi.
Try adding some debugging statements using write diagnostics .
Check to see if VO is getting cleared on loading 2nd page.
Alternate solution would be to add these line id's of the selected lines before forwading.
On 2nd page, get these Id's and do whatever necessary.

Bitlocker Not Enabling

I am having trouble getting Bitlocker to start on deployment for Win7Ent and Win8Pro
If I enable bitlocker manually from within windows it works fine
Tpm is enabled
Partitions:
BDEDisk - Boot - Primary - 350 Mb - No Drive Letter
OSDisk - Primary - 100%
Ignore "Create Bitlocker Partition" as disabled as I am using partition step for that
Is there a log I am overlooking, I cant seem to find anything in SMSTS.log but I am no expert in that log and cant seem to find any problems with anything when I do look.

We enable bitlocker on our task sequences and it always works. I do see some things that you don't have.
1) we do make sure tpm is already enabled (you said you have done this already)
2) Our partition disk step has one named "System Reserved (Primary)" and equals 350 mbs. Then we have another partition named "Windows (Primary)" using 100% of remaining disk space. NTFS (looks like
you may have this step)
3) In our task sequence, before "Apply Operating System", we have "Pre-provision Bitlocker". Destination is "Next available formatted partition". Check skip if TPM is not enabled. (looks like you disabled
this step)
4) After "Setup Windows and Configuration Manager", we have a step called "Enable Bitlocker". We have bitlocker key set to go to Active Directory. Be sure your active directory is setup for this. (I see
that you have this step enabled)
I'm going to assume maybe you're missing the pre-provision. re-enable that. This will fix your "prepare your drive for BL" issue.

BitLocker not Enabled on HP ElitePad 1000 G2

I have an HP ElitePad 1000 G2 that I am using MDT to apply our 8.1 x64 Update image. This task sequence works fine on all other systems on which it has run. On the ElitePad, when the task sequence completes, BitLocker is not enabled.
Running manage-bde-status returns:
Disk volumes that can be protected with
BitLocker Drive Encryption:
Volume C: [OSDisk]
[OS Volume]
    Size:                 115.58 GB
    BitLocker Version:    2.0
    Conversion Status:    Used Space Only Encrypted
    Percentage Encrypted: 100.0%
    Encryption Method:    AES 128
    Protection Status:    Protection Off
    Lock Status:          Unlocked
    Identification Field: Unknown
    Key Protectors:
        TPM
If I look in the BitLocker applet on the control panel, it says "OSDisk (C:) BitLocker is waiting for activation"
the ZTIBDE.log just stops at:
Attempting to intiate ProtectKeyWithNumericalP@ssword
<Message containing password has been suppressed>
A successful system shows:
Attempting to intiate ProtectKeyWithNumericalP@ssword
Success protecting Key with numerical p@ssword
If I click Turn on BitLocker in the control panel applet or run the following commands:
manage-bde -protectors -add c: -recoverypassword
manage-bde -on c: -recoverypassword
The recovery key protector is created and uploaded to AD and BitLocker shows as enabled.
Any ideas to why this is happening?

after some more investigation, I found the following article
http://netecm.netree.ch/blog/Lists/Posts/Post.aspx?ID=80 and adding the registry key referenced in the article fixed the issue.

Web UI does not work after deployment of BBPCRM SP for CRM 7

Hello!
I just applied SP 2 for BBPCRM in our CRM 7 system and after that our web ui does not start correctly.
We can log in and choose a business role, but the we get the following error in the browser
Service cannot be reached
What has happened?
URL http://host.intranet.org:8061/sap_!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN"__html__head__title_Logon Error Message_/title__META http-equiv="Content-Type" content="text/html/css"_body { font-family:tahoma,helvetica,sans-serif call was terminated because the corresponding service is not available.
Note
The termination occurred in system CRD with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:K-i:host_CRD_61-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
It does not make any entries in the system log, but I found the following in the ICM log
Thu Mar 12 07:51:02 2009
*** ERROR => URLDecode recognised invalid sign in form field [ictxxfilt.c 248]
*** ERROR => illegal request {00030882} [http_auth.c 494]
Address Offset REQUEST:
Has anbody else encountered this error and how did you solve it?
I'm not really sure it is related to the BBPCRM package, it could be related to SAP WEBCUIF 700 package that had to be applied before BBPCRM SP 2.
Regards
rollo

Hello!
I just solved it!
I found that the SAP/webcuif services was disabled, if it was the SP that caused it or not, I don't know, but when I enabled it everything started to work!
Regards
rollo

Adobe Javascript buttons does not work after deploying by ADS

Hi,
I have a dynamic PDF with adobe javascript " addInstance (1) ". In the preview of Adobe Lifecycle the PDF works like it should. However when I deploy the PDF in Developer studio the button is working anymore. It looks like the PDF isnt dynamic after deployment.
I have tried to add the following code , but it isnt working:
IWDInteractiveForm iForm1 = (IWDInteractiveForm)view.getElement("InteractiveForm1");
iForm1.setDynamicPDF(true);
Also, the properties of the PDF is set to Interactief Form, and XDP preview format is Dynamic PDF.
Does anyone know what the problem is?
Thank in advance.
Thaibinh
Application details:
Acrobat Reader 7.0.9 and higher
Adobe Live cycle 7.1
Developer studio S 7.0.13
AdobeControl version 6.3018.0.1
Type browser Internet Explorer 6.0
Operation system Linux
Type of interact form ACF
Netweaver 2004s

Hi Harman,
Am i inserting the code at the correct spot?
//@@begin javadoc:wdDoModifyView
Hook method called to modify a view just before rendering.
This method conceptually belongs to the view itself, not to the
controller (cf. MVC pattern).
It is made static to discourage a way of programming that
routinely stores references to UI elements in instance fields
for access by the view controller's event handlers, and so on.
The Web Dynpro programming model recommends that UI elements can
only be accessed by code executed within the call to this hook method.
@param wdThis Generated private interface of the view's controller, as
       provided by Web Dynpro. Provides access to the view controller's
       outgoing controller usages, etc.
@param wdContext Generated interface of the view's context, as provided
       by Web Dynpro. Provides access to the view's data.
@param view The view's generic API, as provided by Web Dynpro.
       Provides access to UI elements.
@param firstTime Indicates whether the hook is called for the first time
       during the lifetime of the view.
//@@end
public static void wdDoModifyView(IPrivateInfosessieenqueteView wdThis, IPrivateInfosessieenqueteView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
    //@@begin wdDoModifyView
     if (firstTime) {
     IWDInteractiveForm iForm1 = (IWDInteractiveForm)view.getElement("InteractiveForm");
     iForm1.setDynamicPDF(true);
    //@@end

Images are not shown after deploying in apps

After deploying my application in apps i have put all my images in media folder even then the images are not displaying, can any tell me what is the reason for this, but when i have deployed before it was working fine...

when the page is displayed without the image, right click on the image place holder and click on properties. Under General tab,
address will show you the place/url page is looking for the image. Make sure you have put the image on that path and the name of image mathes the case as well.
--Tanveer

Commit operation not enabled after createinsert in detail table

Hi Everybody,
After clicking createinsert operation for detail table in master detail, i got unique contraint error from db.after rectifiying the data for newly created row..commit operation not enabled to save the data.
Please find the code i used in my jsf.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document id="d1">
      <af:messages id="m1"/>
      <af:form id="f1">
        <af:panelBox text="PanelBox2" id="pb2">
          <f:facet name="toolbar">
            <af:group id="g2">
              <af:commandButton actionListener="#{bindings.Delete1.execute}"
                                text="Delete1"
                                disabled="#{!bindings.Delete1.enabled}"
                                id="cb4"/>
              <af:commandButton
                                text="CreateInsert1"
                                disabled="#{!bindings.CreateInsert1.enabled}"
                                id="cb3"
                                action="#{backingBeanScope.MyIndustryBean.cb3_action}"/>
              <af:commandButton actionListener="#{bindings.Commit.execute}"
                                text="Commit"
                                disabled="#{!bindings.Commit.enabled}"
                                id="cb5"/>
              <af:commandButton actionListener="#{bindings.Rollback.execute}"
                                text="Rollback"
                                disabled="#{!bindings.Rollback.enabled}"
                                immediate="true" id="cb6">
                <af:resetActionListener/>
              </af:commandButton>
            </af:group>
          </f:facet>
          <af:table value="#{bindings.IndustryEOView1.collectionModel}"
                    var="row" rows="#{bindings.IndustryEOView1.rangeSize}"
                    emptyText="#{bindings.IndustryEOView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                    fetchSize="#{bindings.IndustryEOView1.rangeSize}"
                    rowBandingInterval="0"
                    filterModel="#{bindings.IndustryEOView1Query.queryDescriptor}"
                    queryListener="#{bindings.IndustryEOView1Query.processQuery}"
                    filterVisible="true" varStatus="vs"
                    selectedRowKeys="#{bindings.IndustryEOView1.collectionModel.selectedRow}"
                    selectionListener="#{bindings.IndustryEOView1.collectionModel.makeCurrent}"
                    rowSelection="single" id="t1" width="448"
                    inlineStyle="height:193px;" partialTriggers="::cb3 ::cb4">
            <af:column sortProperty="IdDesc" filterable="true" sortable="true"
                       headerText="#{bindings.IndustryEOView1.hints.IdDesc.label}"
                       id="c2">
              <af:inputText value="#{row.bindings.IdDesc.inputValue}"
                            label="#{bindings.IndustryEOView1.hints.IdDesc.label}"
                            required="#{bindings.IndustryEOView1.hints.IdDesc.mandatory}"
                            columns="#{bindings.IndustryEOView1.hints.IdDesc.displayWidth}"
                            maximumLength="#{bindings.IndustryEOView1.hints.IdDesc.precision}"
                            shortDesc="#{bindings.IndustryEOView1.hints.IdDesc.tooltip}"
                            id="it2">
                <f:validator binding="#{row.bindings.IdDesc.validator}"/>
              </af:inputText>
            </af:column>
            <af:column sortProperty="IdPlace" filterable="true" sortable="true"
                       headerText="#{bindings.IndustryEOView1.hints.IdPlace.label}"
                       id="c1">
              <af:inputText value="#{row.bindings.IdPlace.inputValue}"
                            label="#{bindings.IndustryEOView1.hints.IdPlace.label}"
                            required="#{bindings.IndustryEOView1.hints.IdPlace.mandatory}"
                            columns="#{bindings.IndustryEOView1.hints.IdPlace.displayWidth}"
                            maximumLength="#{bindings.IndustryEOView1.hints.IdPlace.precision}"
                            shortDesc="#{bindings.IndustryEOView1.hints.IdPlace.tooltip}"
                            id="it1">
                <f:validator binding="#{row.bindings.IdPlace.validator}"/>
              </af:inputText>
            </af:column>
          </af:table>
        </af:panelBox>
        <af:panelBox text="PanelBox1" id="pb1">
          <f:facet name="toolbar">
            <af:group id="g1">
              <af:commandButton actionListener="#{bindings.Delete.execute}"
                                text="Delete"
                                disabled="#{!bindings.Delete.enabled}"
                                id="cb2"/>
              <af:commandButton
                                text="CreateInsert"
                                disabled="#{!bindings.CreateInsert.enabled}"
                                id="cb1"
                                action="#{backingBeanScope.MyIndustryBean.cb1_action}"/>
              <af:commandButton actionListener="#{bindings.Create.execute}"
                                text="Create"
                                disabled="#{!bindings.Create.enabled}"
                                id="cb7"/>
            </af:group>
          </f:facet>
          <af:table value="#{bindings.IndustryRatinEOView1.collectionModel}"
                    var="row" rows="#{bindings.IndustryRatinEOView1.rangeSize}"
                    emptyText="#{bindings.IndustryRatinEOView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                    fetchSize="#{bindings.IndustryRatinEOView1.rangeSize}"
                    rowBandingInterval="0"
                    filterModel="#{bindings.IndustryRatinEOView1Query.queryDescriptor}"
                    queryListener="#{bindings.IndustryRatinEOView1Query.processQuery}"
                    filterVisible="true" varStatus="vs"
                    selectedRowKeys="#{bindings.IndustryRatinEOView1.collectionModel.selectedRow}"
                    selectionListener="#{bindings.IndustryRatinEOView1.collectionModel.makeCurrent}"
                    rowSelection="single" id="t2"
                    partialTriggers="::t1 ::cb1 ::cb2 ::cb7">
            <af:column sortProperty="RatingId" filterable="true" sortable="true"
                       headerText="#{bindings.IndustryRatinEOView1.hints.RatingId.label}"
                       id="c5">
              <af:selectOneChoice value="#{row.bindings.RatingId.inputValue}"
                                  label="#{row.bindings.RatingId.label}"
                                  required="#{bindings.IndustryRatinEOView1.hints.RatingId.mandatory}"
                                  shortDesc="#{bindings.IndustryRatinEOView1.hints.RatingId.tooltip}"
                                  id="soc2" autoSubmit="true">
                <f:selectItems value="#{row.bindings.RatingId.items}" id="si2"/>
              </af:selectOneChoice>
            </af:column>
            <af:column sortProperty="RatingSubId" filterable="true"
                       sortable="true"
                       headerText="#{bindings.IndustryRatinEOView1.hints.RatingSubId.label}"
                       id="c6" partialTriggers="soc2">
              <af:selectOneChoice value="#{row.bindings.RatingSubId.inputValue}"
                                  label="#{row.bindings.RatingSubId.label}"
                                  required="#{bindings.IndustryRatinEOView1.hints.RatingSubId.mandatory}"
                                  shortDesc="#{bindings.IndustryRatinEOView1.hints.RatingSubId.tooltip}"
                                  id="soc1" partialTriggers="soc2">
                <f:selectItems value="#{row.bindings.RatingSubId.items}"
                               id="si1"/>
              </af:selectOneChoice>
            </af:column>
            <af:column sortProperty="Place" filterable="true" sortable="true"
                       headerText="#{bindings.IndustryRatinEOView1.hints.Place.label}"
                       id="c4">
              <af:inputText value="#{row.bindings.Place.inputValue}"
                            label="#{bindings.IndustryRatinEOView1.hints.Place.label}"
                            required="#{bindings.IndustryRatinEOView1.hints.Place.mandatory}"
                            columns="#{bindings.IndustryRatinEOView1.hints.Place.displayWidth}"
                            maximumLength="#{bindings.IndustryRatinEOView1.hints.Place.precision}"
                            shortDesc="#{bindings.IndustryRatinEOView1.hints.Place.tooltip}"
                            id="it3">
                <f:validator binding="#{row.bindings.Place.validator}"/>
              </af:inputText>
            </af:column>
            <af:column sortProperty="RatingDesc" filterable="true"
                       sortable="true"
                       headerText="#{bindings.IndustryRatinEOView1.hints.RatingDesc.label}"
                       id="c3">
              <af:inputText value="#{row.bindings.RatingDesc.inputValue}"
                            label="#{bindings.IndustryRatinEOView1.hints.RatingDesc.label}"
                            required="#{bindings.IndustryRatinEOView1.hints.RatingDesc.mandatory}"
                            columns="#{bindings.IndustryRatinEOView1.hints.RatingDesc.displayWidth}"
                            maximumLength="#{bindings.IndustryRatinEOView1.hints.RatingDesc.precision}"
                            shortDesc="#{bindings.IndustryRatinEOView1.hints.RatingDesc.tooltip}"
                            id="it4">
                <f:validator binding="#{row.bindings.RatingDesc.validator}"/>
              </af:inputText>
            </af:column>
          </af:table>
        </af:panelBox>
      </af:form>
    </af:document>
</f:view>
</jsp:root>

Hi,
Need to set partialSubmit true for CreateInsert and partialTrigger attribute for Commit button(Select Createinsert button for partialTrigger )

Message states that Camera Raw is not enabled after transferring data to a new MacbookPro

Using photoshop and Bridge CS6.
When I attempt to open a photo in Camera raw I receive this message Camera Raw is not enabled.
"Camera raw requires that a qualifying product has been launched at least once to enable this feature.

had to wipe and reload

Can not open After effects by System 10.9

Kann After Effect nicht starten. Habe die aktuelle Version auf dem Mac
can not open After Effect. But i have the right Version on Mac

12.0 ist nicht aktuell. 12.1 oder 12.2 schon eher. Das sind die üblichen Probleme mit Mavericks und insbesondere 12.1 hat schon etliche davon beseitigt... Also einfach mal die Updates installieren.
M ylenium

Not reporting after deploying

My seq is working fine on my development computer, both via the development editor and the simple/full-featured userintyerface.
I have setup reporting in ATML, Access DB and offline report format.
Reports are located on a server inhouse.
When i deploy my system, and install in on my production machine, and run it via the Simple or Full-featured UI, it says "no result from main seq", and none of the 3 reports are being updated !
I store files via my teststequence, on the same server, during the test, and those files are updated. I.E. the test-station see the server and folder ok
any ideas ?

Hi Nikolaj,
The station options settings are stored in the testexec.ini file. Search directories is another example of what is stored here. You can find that file and other configuration files in the <TestStand Application Data>\Cfg directory.
You can find more information here:
How Do I Include My Station Globals, Search Directories, Tools Menu, etc. in My Deployment When Using the TestStand Deployment Utility?
And here:
TestStand 2014 Help: Configuration Files

UDEV touchpad not enabling after removing mouse

Hi and thanks for reading,
I have created udev rules
ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="00cb", ENV{DISPLAY}=":0.0", ENV{XAUTHORITY}="/home/john/.Xauthority", ENV{ID_CLASS}="mouse", RUN+="/usr/bin/synclient TouchpadOff=1"
ACTION=="remove", SUBSYSTEM=="usb", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="00cb", ENV{DISPLAY}=":0.0", ENV{XAUTHORITY}="/home/john/.Xauthority", ENV{ID_CLASS}="mouse", RUN+="/usr/bin/synclient TouchpadOff=0"
Now it works as expected when I plug in the mouse the touchpad disables. However when uplugging the mouse the touchpad does not enable again. I cannot for the life of me figure out why?

Never mind, I have solved the problem. Searched "Synaptics" in My Computer. Opened up a folder labelled Synaptics. Selected InstNT. Right-Clicked; chose "run as administrator". Problem solved.

Get "404 Not Found" after deployment. How to find out correct URL?

To the experienced:
In preparing to deploy my application, I am using JDeveloper 10.1.3.4 to deploy the application to the standalone oc4j server that is included in JDeveloper. After the deployment, I get the "404 Not Found" error when trying to invoke the application in a browser. The deployment looks OK, becasue the log window in JDeveloper showed no error when running deployment from inside JDeveloper. Therefore I guess the question is how to find out the correct URL to invoke the application. The steps I took in doing the deployment are as follows.
I first installed the standalone oc4j by running the <jdev_home>\jdev\bin\start_oc4j .bat file. The installation is OK because I deployed the SRTutorial applcation and invoked it in a browser successfully.
The WAR file was created by right-clicking the ViewController project and select to create a WAR file. To the application's Context Root its own name, I typed "ZB" in the box for the context root.
Then in ViewController -> Resources, right_click the deployment file (ZBOV.deploy) and chose "Deploy to" the local_standalone_oc4j. The messages in JDeveloper's log window for the deployment are all clean without errors.
I then used this url to invoke the deployed application in a browser:
http://localhost:8888/ZB/faces/staff/login.jspx
But I got an "404 Not Found" error. Right away I tried invoking the SRTutorial application, and it runs fine.
login.jspx is one of the pages for the appllication. In the application navigator, it is located with other files in the ViewController/Web Content/staff folder, therefore I used /staff/login.jspx after ZB/faces.
What could be wrong? If the deployment is actually successful, how to find out the correct url to invoke the application?
Many thanks for your help!
Newman

Hi, Arun,
Thank you for the suggestion. I tried it but got the same error.
I tried it by first undeploying the application using the enterprise manager page (which is also part of the oc4j included in JDeveloper). I select the application and clicked the undeploy link, confirmed that I wanted to remove it. And it was removed.
Then in JDeveloper, I right-clicked the ViewController, and in the properties of the probject selected "J2EE Application" and then selected "Use Custom Settings", then in the "J2EE Web Context Root" box I entered "ZB". Created the deployment profile again, overwriting the existing one, and then right-clicked the ZB.deploy node to deploy to the standalone oc4j on the localhost. And I used the url:
http://localhost:8888/ZB/faces/staff/login.jspx
And I got the same "404 Not Found" error.
There was no error at the time of deployment using the ZB.deploy profile. On the enterprise manager page, the path of the deployed application is given as /C:/jdev10134/j2ee/home/applications/ZB.ear, and the folder of the deployed application is there. Question is: if the deployment is actually OK, can the correct URL be found in some file somewhere in the folder?
All ideas and suggestions are very much appreciated!
Newman

OIM 11g - User Not enabled After the job "enable user after start date"

Hi,
I have a future hired user in OIM whose start date is set in OIM. The status of the user in OIM is 'Disabled Until Start Date'.
After the start date has passed and the scheduled job 'enable user after start date' is run, I see that the user is still in the status 'Disabled Until Start Date'. I re-run the scheduled job 'enable user after start date', this time manually, still the state of the user remains unchanged.
Please help in troubleshooting as to find out the root cause of the issue and a workaround/solution, if possible.
This issue is intermittent and has happened with quite a number of user. Any pointer would be helpful.
Regards,
Sudipto S.

I agree with Nayan.
One alternative approach can be to write your own custom scheduler which can overcome the limitation of OOTB scheduled job 'enable user after start date'. Let the OOTB job get executed first. After it, your custom scheduler should fire a simple SQL Query:
SELECT USR_KEY, USR_STATUS FROM USR WHERE (USR_START_DATE > SYSDATE -1) AND USR_STATUS='Disabled Until Start Date';
//Means those users who are supposed to get enabled today and are still not yet enabled and are in 'Disabled Until Start Date'. May be 2-3 user keys at max will come...
As you said it happens only intermittently and not for all users... So, let the OOTB scheduled job take care of most of such users... And after it has finished, if any user still remains in 'Disabled Until Start Date', your custom scheduler should enable it via using tcUserOperationsIntf.enableUser(userKey);
Using API is always better than database update... Because APIs trigger downstream provisioning workflows as well and not just updates OIM Database...
Keeping your constraints in mind, I think it is the correct answer.

Scheduled scaling not applying after deployment update

We are running some cloud services with worker roles that scale out at scheduled times (during the day). This works fine with no problem. However when I update the deployment (I push a new package to staging, then do a swap and this is done at night) the
deployment fails to scale the next day. I need to manually log into the portal and increase the instance count to force azure to scale out. After that is fine until I do another deployment. Can anyone shed any light on this.
Thanks

Thanks MSDN_iceice I appreciate your feedback.
I believe you are correct in that the autoscale is removed after an updated deployment which is the behavior I have been experiencing.
I know it has been a while but I think this should either be reported as a bug or the user experience fixed.
My reasoning for this is:
When I deploy to staging and swap the instance to production the expected behavior would be for my production scaling settings to be applied to it. When I view the scale settings and look at the summary the autoscale is marked as "On". However
in reality this is not the case. In order to reapply the autoscaling I need to up (or down) my instance count and then once that it applied set it back to the original instance count I requested. After this the auto scaling works again.
This does not seem very intuitive to me.
Also when doing frequent deployments it is easy to overlook reapplying the scaling which can have a negative experience on services when this is missed.
Thoughts or is there a better way to reapply the scaling?
Thanks

Bitlocker not enabled after deployment (Dell systems)

Similar Messages

Maybe you are looking for