Bitlocker Not Enabling
I am having trouble getting Bitlocker to start on deployment for Win7Ent and Win8Pro
If I enable bitlocker manually from within windows it works fine
Tpm is enabled
Partitions:
BDEDisk - Boot - Primary - 350 Mb - No Drive Letter
OSDisk - Primary - 100%
Ignore "Create Bitlocker Partition" as disabled as I am using partition step for that
Is there a log I am overlooking, I cant seem to find anything in SMSTS.log but I am no expert in that log and cant seem to find any problems with anything when I do look.
We enable bitlocker on our task sequences and it always works. I do see some things that you don't have.
1) we do make sure tpm is already enabled (you said you have done this already)
2) Our partition disk step has one named "System Reserved (Primary)" and equals 350 mbs. Then we have another partition named "Windows (Primary)" using 100% of remaining disk space. NTFS (looks like
you may have this step)
3) In our task sequence, before "Apply Operating System", we have "Pre-provision Bitlocker". Destination is "Next available formatted partition". Check skip if TPM is not enabled. (looks like you disabled
this step)
4) After "Setup Windows and Configuration Manager", we have a step called "Enable Bitlocker". We have bitlocker key set to go to Active Directory. Be sure your active directory is setup for this. (I see
that you have this step enabled)
I'm going to assume maybe you're missing the pre-provision. re-enable that. This will fix your "prepare your drive for BL" issue.
Similar Messages
-
BitLocker not Enabled on HP ElitePad 1000 G2
I have an HP ElitePad 1000 G2 that I am using MDT to apply our 8.1 x64 Update image. This task sequence works fine on all other systems on which it has run. On the ElitePad, when the task sequence completes, BitLocker is not enabled.
Running manage-bde-status returns:
Disk volumes that can be protected with
BitLocker Drive Encryption:
Volume C: [OSDisk]
[OS Volume]
Size: 115.58 GB
BitLocker Version: 2.0
Conversion Status: Used Space Only Encrypted
Percentage Encrypted: 100.0%
Encryption Method: AES 128
Protection Status: Protection Off
Lock Status: Unlocked
Identification Field: Unknown
Key Protectors:
TPM
If I look in the BitLocker applet on the control panel, it says "OSDisk (C:) BitLocker is waiting for activation"
the ZTIBDE.log just stops at:
Attempting to intiate ProtectKeyWithNumericalP@ssword
<Message containing password has been suppressed>
A successful system shows:
Attempting to intiate ProtectKeyWithNumericalP@ssword
Success protecting Key with numerical p@ssword
If I click Turn on BitLocker in the control panel applet or run the following commands:
manage-bde -protectors -add c: -recoverypassword
manage-bde -on c: -recoverypassword
The recovery key protector is created and uploaded to AD and BitLocker shows as enabled.
Any ideas to why this is happening?after some more investigation, I found the following article
http://netecm.netree.ch/blog/Lists/Posts/Post.aspx?ID=80 and adding the registry key referenced in the article fixed the issue. -
Bitlocker not enabled after deployment (Dell systems)
I have been deploying to Dell systems, the TPM chips are active on the machines, these are OOB machines, do the deployment to Enable Bitlocker using TPM Only (SCCM 2012 w/MDT 2012 UDI) but when the machines boot up, it says Bitlocker protection is suspended,
and if I go to turn it on, the Wizard fails to initialize, saying one or more drive protector keys needs to be available, etc.
Not sure what's missing in my task sequence to get Bitlocker to encrypt the drive correctly.Hi,
Please check smsts.log to find more information.
The following blogs might help you to configure the Task Sequence.
http://blogs.technet.com/b/simonmay/archive/2013/02/05/enable-and-activate-tpm-for-bitlocker-pre-provisioning-in-winpe.aspx
http://en.community.dell.com/techcenter/os-applications/w/wiki/how-to-enable-trusted-platform-module-using-a-configmgr-2007-task-sequence.aspx
(Note: Microsoft provides third-party contact information to help you find technical support. This
contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Completed OSD - Time Changing if Bitlocker is Enabled
I Have a 99 percent good OSD, but If I have bitlocker enable at the end of the TS the time changes +2hours
We have an inhouse time server that doesnt seem to be helping me out here.
I am stumped
TS Looks Like this (but bitlocker is enabled of course)
SMSTS.LOG Below
https://skydrive.live.com/redir?resid=DF018345C62C41DB!116&authkey=!AF4STlz1Pr_ntJU&ithint=file%2c.logDo you mean the system time will be added with 2 more hours? The log file does not tell much.
I recommend you keep the other steps on and Enable BitLocker off. See if it make any difference.
Juke Chou
TechNet Community Support -
Mercury CUDA not enabling when using NVIDIA GeForce GTX 285 on Apple Mac Pro after Mavericks install
Been using the same setup since CS5 with the Mercury CUDA running perfectly. After recent upgrade of OS X to 10.9 Mercury CUDA is no longer available and only lets me run with the OpenGL or software options. Im using a NVIDIA GeForce GTX 285 for apple computers. Here are the results for the GPUSniffer program in the latest Premiere Pro 7.1.0 files. The LAST line make me chucle because it the first on the list of supported card in the "cuda_supported_cards.txt" file. Anybody else seen this?
--- OpenGL Info ---
Vendor: NVIDIA Corporation
Renderer: NVIDIA GeForce GTX 285 OpenGL Engine
OpenGL Version: 2.1 NVIDIA-8.18.27 310.40.05f01
GLSL Version: 1.20
Monitors: 1
Monitor 0 properties -
Size: (0, 0, 1920, 1080)
Max texture size: 8192
Supports non-power of two: 1
Shaders 444: 1
Shaders 422: 1
Shaders 420: 1
--- GPU Computation Info ---
Found 1 devices supporting GPU computation.
OpenCL Device 0 -
Name: GeForce GTX 285
Vendor: NVIDIA (Apple platform)
Capability: 1.2
Driver: 1
Total Video Memory: 1024MB
* Not enabled by default because it did not match the named list of cards.found a link from a couple of days ago on a creative cow forum post one of the poster saying they are from adobe stating this
Re: Mercury Playback Engine MacPro
by Peter Garaway on Nov 12, 2013 at 9:49:16 am
Hi Wendell,
Sorry for the inconvenience. NVIDIA is currently working on drivers that support CUDA on Mavericks 10.9 with some of the older NVIDIA cards such as the GTX 285 and the Quadro 4800.
For others interested, the Quadro 4000, K5000 and GTX 680 ect... work with CUDA in 10.9.
Best,
Peter Garaway
Adobe
Premiere Pro
I have latest CUDA drivers, so i guess i am just waiting till a proper update that have the fixes to support my card. -
I am using Adobe Acrobat Professional XI running on Windows 8.
This “feature” has been bugging me for some time now. I remember it happening when I used Acrobat 9 Professional (Windows XP) and it is still happening in Acrobat XI Professional. I think I figured out a situation when I can reproduce this “feature” conistently and I hope someone fixes this.
Try the following and see what happens:
1. Acrobat Professional is not open.
2. Launch Word and start editing a document (or some other authoring tool that can generete PDF document).
3. After editing the document, generate a PDF version of the document.
4. Launch Acrobat Professional and edit the PDF document generated in 3.
5. Add a button.
6. View the button's properties.
7. Change the Fill Color property in the Appearance tab to none.
8. Change the Layout in the Options tab to Icon only.
Now here is what bugs be. Shouldn’t the 'Choose Icon ...' button be enabled? It is not enabled after step 8. It is possible that 'Choose Icon ...' button is enabled for some of you. I this case, it would be nice if at least one of you who experience the same bug say so in this thread so that Adobe doesn't think I am sending them on a wild goose chase.
I can enable it by selecting a different tab and then returning to the Options tab. A similar thing happens when reverting back from 'Icon only' to 'Label only' but I am not sure how to reconstruct a scenario for this one.
Here is the dialog box for one instance when I noticed the bug.
Regards,
JohnYou're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.
-
Drill by is not enabled in BO 4.0 WebI report
Hi,
In one of my report I have to do Drill by. But when I right click on the dimension I am able to see only Drill Down that is enabled.
Drill by is not enabled. Please let me know how to enable Drill By in BO 4.0 WebI report.
Thanks in advance
LavanyaHai
Enable drill mode right in BOE 4.0
http://www.sdn.sap.com/irj/scn/web-intelligence40-elearning-all
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0e40af9-0d6a-2e10-b58a-c4ecde511a6e
Thank u -
firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.
Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems. -
We have a corporate website, we officially support FF3, FF4, IE8 and IE9. Our web site is quite big, so we really need browser caching, first time page load is around 15 seconds. With files in the cache getting new page is less than a second.
Everything works perfect except with FF3. With FF4, IE8, IE9 if we are on the website, clicking everywhere is fast, the page is in the cache. If we restart the browser, it is still fast, it loads files from the cache.
But with FF3 we have a problem. Every time we restart the browser, it is loading the files again from the server, instead of using the local cache (checked with Firebug). I can reproduce the problem anytime, it is the same with every FF3 instances. I double checked, the "clear history when Firefox closed" option is not enabled.
Could you advise please how to use the local cache either after browser restart?
Thank you!
ChrisJust read that the default memory storage on FF is set to 5 mbs. You can up that by clicking on tools, advanced and overriding the default and set it to 50 mbs (if you use lots of tabs) or 10 mbs (if you use just a few).
I open a blank tab and clear the cache periodically, while I am working. I can have several tabs open and watch videos on Youtube, by doing this. Have you cleared your cache?
Since I have an older computer, I've also used CCleaner for years. I use it often, but always before signing off. You can get it free...search for CCleaner, download from Pirifoam free. I didn't change any of the settings and it clears crap left behind from uninstalling programs, clears all browsers at once of: cookies, history, passwords, etc. I love it!
I had freezing, before using the "open blank tab, clear the cache" thing. Now I have no problems. Plus, as I said...you can change the default memory usage for FF and that should help too.
Hope this helps! Good luck! :) -
I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working
I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea
-
Remote Desktop Connection - cannot proceed because authentication is not enabled
Hello,
I try to connect via RDP from a Windows Server 2008 R2 to another 2008 R2 Server.
I always get the error message.
The connection cannot proceed because authentication is not enabled and the remote computer requires than authentication be enabled to connect.
On the target machine the Remote Settings are set to:
Allow connections from computers running any version of Remote Desktop.
Firewall is disabled on both servers.
Therefor I do not understand why I get an error message, that authentication is required.
The target box is a nearly fresh syspreped machine with all current Hotfixes installed.
I already found a lot of people having that problem by using XP (old RDP client), but no one seems to have this problem when connecting from 2008 R2 to 2008 R2.
Thank you very much in advance for every hint.
BR
MatthiasHi Matthias,
First I would like to confirm if you have deployed RDS (Remote Desktop Services) and you got the error, if so, please check this option
TS Configuration, >> RDP-Tcp Properties >> change the Security Layer to "Negotiate"
Then Recycle the TS Gateway service.
Refer to:
Unable to connect to Server using the Remote Web Workplace (RWW) Small Business Server 2008
If this issue has nothing to do with RDS, and I suppose you used the cmd "mstsc" to remote access. This issue may also occur because of the version of mstsc, please make sure it has been upgraded to the new version.
In addition, Did you have another newer server available like Server 2012? So we can test and try to use Server 2012 to remote access Server 2008 R2, and check if the issue persists.
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support -
# Question
Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
Java(TM) Platform SE 6 U24
Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24 -
Got error: Location Code is not enabled in the XML Gateway Server
Hi,
When I perform Compliance rule screening on GTM - Globel Trade Management,that I defined GTM as an Trading Partner on EBS R12.1.3,
GTM can send response to EBS,but I see the following error message via Transaction Monitor on EBS workflow:
[The Standard:OAG, Transaction Type:ITM , Transaction SubType:EXPORT_COMPLIANCE and Location Code GTM6.2 is not enabled in the XML Gateway Server. Pls check your Setup.]
On EBS,I defined an ITM Partner for GTM,named 'GTM6.2',according to the document created by you: ITM Setup.doc
and I also finished the following steps:
1. ITM Application Users
2.ITM Partner Service Types
3.ITM Parameter Setup
4.Order Type Creation: ITM Only
5.Customer Creation: create a customer named 'GTM6.2', also enter 'GTM6.2' as EDI Location
6.Define Transactions on XML Gateway as following:
<Header>:
Party Type: Customer
Transaction Type: ITM
Transaction Sub Type: EXPORT_COMPLIANCE
<External Transactions (Lines)>:
Standard Code: OAG
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Queue: APPLSYS.ECX_IN_OAG_Q
7.Define Trading Partners on XML Gateway as following:
<Header>:
Trading Partner Type: Customer
Trading Partner Name: GTM6.2
<Trading Partner Details>:
Transaction Type: ITM
External Transaction Type: ITM
External Transaction Sub Type: EXPORT_COMPLAINCE
Map: WSHITEIN
Source Trading Partner Location Code: GTM6.2 (same as the value what defined in EDI Location for customer)
I think the combination of External Transaction Type, External Transaction Subtype, Standard Code,Source Trading Partner Location Code
should be existing once done above steps, I have no idea why the error prompted.
Does someone can tell how to trace the error?
Thanks,
Rambleruser12254038 wrote:
Can you send any supporting documents on ITM Setup? My client is implementing ITM for the first time and I wanted to know more details on how it works in R12.1.3 version of EBS?Oracle International Trade Management (ITM) Partner Integration: Specifications [ID 572524.1]
International Trade Management Integration [ID 259691.1]
How Can I Tell if International Trade Management is Installed or Not? [ID 742539.1]
What are the Required Setups for International Trade Management (ITM) Flows in Shipping Execution? [ID 782861.1]
What Patches Provide the Latest Fixes and Enhancements for ITM Adapter? [ID 465122.1]
How to Generate Debug Information From ITM Adapter for XML Processing [ID 738925.1]
How to Generate Debug File for International Trade Management (ITM) [ID 1294853.1]
Thanks,
Hussein -
Why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
Hi All,
Does anyone know why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
I just found this out after I installed bootcamp and Windows 7 on my Macbook 13" with P8600 2.4Ghz CPU 2GB RAM and 250G HDD after more than a year of using it.
After I installed the CPU monitoring widget on Windows 7 and CPUZ, I noticed that the lowest Freq that my Macbook operates even with <5% CPU load is only 1.5Ghz and VID @1.0V.
I installed Coolbook on OSX to confirm what I saw on Windows. I was surprised that SLFM is not visible in Coolbook which is the same result I got from Windows 7 CPU monitoring widget and CPUZ.
I checked with our local Mac support and they got the same results for all of Macbook 13" Aluminums late 2008 model. SLFM is not visible on Coolbook which means, it is not enabled.
I tried to install Coolbook on my wife's Macbook Pro 13" 2010, which has the same spec, P8600 2.4Ghz CPU and 250G HDD. The only difference is the memory which is 4GB RAM. There, SLFM is enabled and works just fine, running at 798Mhz @0.875V.
Can anyone please help confirm if this is really the case for Macbook 13" late 2008 model?
Because I checked the Intel P8600 Datasheet and SLFM should always be enabled. Otherwise, it will affect battery life as well as long term reliability of the CPU.
I would appreciate if the Macbook and Macbook Pro owners in this forum can help confirm using Coolbook the status of SLFM in your own Macbooks. You may use any other tool in checking the SLFM and share it with us if you believe it is more reliable and better than Coolbook. Thanks.
Message was edited by: jespadaBTW, Here is what I got from Coolbook for comparison. As you can see the late 2008 Macbook has no SLFM info.
Legend:
SLFM - Super Low Freq Mode
LFM - Low Freq Mode
HFM GV - High Freq Mode (Geyserville/Speedstep)
HFM - High Freq Mode
Macbook 13" Aluminum late 2008 P8600 2.4Ghz 2GB RAM 250GB HDD
Freq VID
SLFM -- --
LFM 1596Mhz 1.0000V
HFM GV2 1862Mhz 1.0500V
HFM GV1 2128Mhz 1.1000V
HFM 2394Mhz 1.1375V
Macbook Pro 13" Aluminum 2010 P8600 2.4Ghz 4GB RAM 250GB HDD
Freq VID
SLFM 798Mhz 0.8750V
LFM 1596Mhz 1.0000V
HFM GV2 1862Mhz 1.0500V
HFM GV1 2128Mhz 1.1000V
HFM 2394Mhz 1.1375V
Message was edited by: jespada
Message was edited by: jespada -
I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?
More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed
Maybe you are looking for
-
Thumbnails in Bridge lost in files saved with AE CS6
On Windows I have some templates (aet) from AE 7 and CS3 that include thumbnails in the XMP, and Bridge CS6 shows these. If I open these templates in AE CS6 and save them out, no thumbnail is preserved/added to the XMP. I looked through the preferen
-
ALV Grid - Printnig field names.
Hi Gurus, I have a requirement for a report which has the format for display as shown below. Sr. No | Mat No. | Material grp | some material types | COLUMN HEADINGS |*********|*************** | 10g | 20g | 30g | 40g | COLUMN HEADINGS 000001 |xyz****
-
Java.lang.SecurityException when granting java permission
DB version 11.1.07 We used this command to grant the following permission in development and stage environment with no problems. exec dbms_java.grant_permission( 'SCHEMA', 'SYS:java.lang.RuntimePermission', 'getClassLoader', '' ); When the same comma
-
Is EQing possible on a Mac book pro outside of Itunes?
Meaning, for general sound coming out of my laptop. Is there a way I could manipulate the lows, mids and highs? I went under the apple and checked under system preferences and there seems to be no option for this under sound. Could it be found as a w
-
Can't record Acrobat 6 editing
I'm using Captivate 3 to record a document work flow (using web-based "Documentum" software). At one point the user clicks a link within Internet Explorer to launch Acrobat 6 Pro in order to put comments on a file. Clicking the link opens another IE