Bizarre HD Puzzler:Primary HD doesn't show up in Finder

Haven't come across this before...
My primary HD (Macintosh HD), which has all of my System, Application, Library, etc files on it...doesn't show up in Finder any more, or...I should say...as of tonight. It's there when I do a search. I can open it and all the files appear to be intact. All of my applications seem to running normally (except for Lightwave 3D, which can't find the softward key that's stored in the library file). I can install software to the Macintosh HD as well.
It's just now showing up in the finder.
I'm running a Dual 2.3 GHz PowerPC G5/OS 10.4.10/6.5 GB DDR SDRAM.
Any suggestions would be greatly appreciated.
Rob Morris
[email protected]

Dale,
Thanks for the advice. I had previously verified and repaired. Forgot to include that. The S.M.A.R.T. status of the Macintosh HD is "Verified".
Here's the log from when I ran the Disk Utility on it yesterday:
Aug 19 22:54:23: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Group differs on ./Applications/Utilities/Activity Monitor.app/Contents/Resources/pmTool, should be 80, group is 0
Group differs on ./Applications/Utilities/Keychain Access.app/Contents/Resources/kcproxy, should be 80, group is 0
Group differs on ./Applications/Utilities/ODBC Administrator.app/Contents/Resources/iodbcadmintool, should be 80, group is 0
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Permissions differ on ./Library, should be drwxrwxr-t , they are drwxrwxr-x
Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk1s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 58CB77F9-4E72-3451-90B5-06E9F22A9AB4
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 85.0 GB (91,269,251,072 Bytes)
Used : 147.8 GB (158,655,840,256 Bytes)
Number of Files : 597,791
Number of Folders : 159,900
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 1
Partition Number : 3
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Group differs on ./Applications/Utilities/Activity Monitor.app/Contents/Resources/pmTool, should be 80, group is 0
Owner and group corrected on ./Applications/Utilities/Activity Monitor.app/Contents/Resources/pmTool
Permissions corrected on ./Applications/Utilities/Activity Monitor.app/Contents/Resources/pmTool
Group differs on ./Applications/Utilities/Keychain Access.app/Contents/Resources/kcproxy, should be 80, group is 0
Owner and group corrected on ./Applications/Utilities/Keychain Access.app/Contents/Resources/kcproxy
Permissions corrected on ./Applications/Utilities/Keychain Access.app/Contents/Resources/kcproxy
Group differs on ./Applications/Utilities/ODBC Administrator.app/Contents/Resources/iodbcadmintool, should be 80, group is 0
Owner and group corrected on ./Applications/Utilities/ODBC Administrator.app/Contents/Resources/iodbcadmintool
Permissions corrected on ./Applications/Utilities/ODBC Administrator.app/Contents/Resources/iodbcadmintool
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Owner and group corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions differ on ./Library, should be drwxrwxr-t , they are drwxrwxr-x
Owner and group corrected on ./Library
Permissions corrected on ./Library
Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
Owner and group corrected on ./private/var/log/secure.log
Permissions corrected on ./private/var/log/secure.log
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Name : WDC WD2500JD-41HBC0
Type : Disk
Disk Identifier : disk1
Media Name : WDC WD2500JD-41HBC0 Media
Media Type : Generic
Connection Bus : Serial ATA
Connection Type : Internal
Connection ID : Device 0, "A (upper)"
Partition Type : Applepartitionscheme
Device Tree : first-boot/@0:0
Bay : "A (upper)"
Writable : Yes
Ejectable : No
Mac OS 9 Drivers Installed : No
Location : Internal
Total Capacity : 232.9 GB (250,059,350,016 Bytes)
S.M.A.R.T. Status : Verified
Disk Number : 1
Partition Number : 0

Similar Messages

  • What do i do when external optical drive doesn't show up in finder?  how can i import software, music, etc. when the drive isn't recognized/mounted/whatever?

    the internal optical drive on my early 2006 20"imac has mechanical problems ejecting discs.  i've gone thru all the recommended steps to eject discs, and have luckily been able to eject the last 3 discs but only after spending 30-60 minutes going thru all of the steps over and over, and today just trying "eject disc" in itunes since i had itunes open.  i don't want to put another disc in - the drive clearly has problems with the mechanical eject mechanism, and from what i've read that's not unique to my computer.
    i bought an external optical drive: lite on, clamshell design to avoid problems with the eject mechanism; i contacted the mfr who said it's mac compatible.
    the drive plays dvds, which is all i've tried so far, but doesn't show up in finder.  so i don't know how to use it to load software, or music, or anything besides watch dvds.
    is there something i can do to get the drive recognized/mounted/whatever?  i would prefer to not spend the $220 which was quoted to me by an authorized mac repair company, even tho i think that's probably a reasonable cost given the delicacy of the operation as shown on ifixit.com. 
    thanks!

    I have an external LaCie burner and it will not show up on my Mac unless I insert a CD or DVD - in that case, the media will show up (I have these settings in the Pref Pane):
    If you want to burn files or music to blank media, you can use Finder or Disk Utility for files, but should use an iTunes playlist/iTunes for music and a movie burn app for videos/movies (such as iDVD, Roxio Toast, Burn, etc).
    If you simply want to drag files over as a backup, an external hard drive is a much better solution than a burner.

  • My external hard drive doesn't show up in finder, is it dead?

    My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
    I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
    Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

    If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
    If the Disk Utility doesn't see it, contact professional support.
    (64290)

  • My iPhone 4S is picked up by both itunes and iphoto but doesn't show up in Finder

    My iPhone 4S is picked up by both itunes and iphoto but doesn't show up in Finder and I can't get it to sync with iCal.  Any ideas?  I've had trouble in the past with cameras and other devices not showing up in Finder and I don't know what is wrong!  I have a Mac OS X 10.5.8 which is quite old but this is its main problem...
    Thanks!

    The sync is 2 way. If you created items in the calendar on the phone, however, BEFORE you set up the sync relationship, those items are stored in the calendar on the phone only.
    Go into the calendar and tap the "Calendars" button in the upper left. You will see lists of all the calendars. On my iPhone are those that live exclusively on the phone. You will also see From My Mac (or something similar) as well as any that are synced with Exchange accounts, iCloud, etc.
    Now go to Settings>Mail, Contacts, Calendars. Scroll down to Calendars and make sure the Default Calendar is set to the correct calendar.  I don't believe there is any easy way to move all your entries from the local calendar to the one that syncs with iCal, but you can go into each entry and specify which calendar it belongs to.

  • MacMini doesn't show up in Finder.app on MacBook Pro

    Hi,
    I'm using a MacMini (2012)  as a headless Server.
    After upgrading the MacMini to Yosemite (10.10.2), the MacMini doesn't show up in Finder on my Macbook Pro. I'm using this for Screensharing.
    Its very strange, because if the Mini sleeps, it shows up in Finder. Then I click the icon, the Mini wakes up. But then the MacMini Icon disappears. :-(
    After reboot the Mini it works as expected until the Mini goes to sleep.
    I think its a general problem, because all Bonjour using services (like iStat Server) doesn't work properly. All services doesn't show up automatically.
    Direct connect via manual tipping in the IP in the Screensharing.app works without problems.
    What I've done:
    - Resetting all Network settings, by deleting the /Library/Preferences/SystemConfiguration folder.
    - The discoveryd service is NOT blocked in the Firewall settings.
    - restarting all Router and the Airport Express
    I hope u can help me.
    Greeting Simon

    Hi,
    a dongle is already pluged in.
    Its not a general problem with the Screensharing tool. Screensharing is working with dirket IP.
    The problem is more the Bonjour discovery to other devices.

  • Why doesn't my card reader work when I take it from the camera and put it in the reader? Nothing happens and it doesn't show up in finder.

    When I put my card into the reader, nothing happens. It doesn't show up in finder so I can't dismount it. The pictures on it aren't readeable all of a sudden, except for two of them, and that's all that would download to iphoto, but I had to connect the camera since the card reader doesn't resond.

    Hi bricknut dab,
    Welcome to the Support Communities!  Are you asking about the SD slot on your Mac, or is this an external card reader plugged into a USB port?  If it is the one on your Mac, the article below may be helpful.  Did you try more than one SD card?  You can use Disc Utility to erase and reformat the card if needed.
    About the SD and SDXC card slot
    http://support.apple.com/kb/ht3553
    I put the card in the slot, but it did not mount.  What should I do?
    Remove the card and insert it again. Sometimes, if you put the SD card into the slot too slowly, it may not mount properly.
    Can I reformat an SD card with Disk Utility?
    Yes. Using Disk Utility, you can partition and format an SD device as FAT32 (using the MS-DOS FAT setting) or Mac OS Extended. The Mac OS Extended format can only be used on Macintosh systems. Cards formatted to Mac OS Extended will not be recognized by non-Apple systems. Formatting cards larger than 32GB for use with digital cameras, GPS, and other devices may require formatting them with the exFAT file system. When in doubt, format the cards in the device you intend to use with the card.
    Cheers,
    - Judy

  • My DVD/CD drive doesn't show up in finder, it does via VM ware on XP, how do I get it to show up in both OS

    my DVD/CD drive doesn't show up in finder, it does via VM ware on XP, how do I get it to show up in both OS

    If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
    If the Disk Utility doesn't see it, contact professional support.
    (64290)

  • My Toshiba 1TB 2.5 inch External StorE Art HDD doesn't show up in Finder.  The light is on and it hums. Has always worked perfectly and now this. Using it on a 2010 Mac with Snow Leopard 10.6.8

    My
    Toshiba 1TB 2.5 inch External StorE Art HDD doesn't show up in Finder.
    The light is on and it hums. Has always worked perfectly and now this. Using it on a 2010 Mac with Snow Leopard 10.6.8

    tried another cable (from a camera) with no joy. However after turning off TM and searching for the EHD and not finding it, I revisited Disk Utility and can 'see' it there. The bad news is that it says,
    Verifying volume “Toshiba 1TB”
    Checking Journaled HFS Plus volume.
    Invalid extent entry
    The volume   could not be verified completely.
    Error: This disk needs to be repaired. Click Repair Disk.
    Verify and Repair volume “Toshiba 1TB”
    Checking Journaled HFS Plus volume.
    Invalid extent entry
    The volume   could not be verified completely.
    Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."

  • Audio CD doesn't show up in Finder, desktop or iTunes

    Before I upgraded to Snow Leopard, I had no problems playing my audio CDs and importing them to iTunes. After I upgraded, 1 out of 5 times an audio CD won't be recognized by the OS and thus doesn't show up on the Finder, Desktop (as an icon), or in iTunes.
    As a result, I can't eject the disc and I have to reboot the system to get it out (terminal way doesn't work). Any suggestions on why this is and if this is a bug?
    I do not want to reboot my system each time the OS doesn't recognize an audio CD.

    HI,
    Try repairing disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Also, open System Preferences/CD&DVD's.
    Where you see: When you insert a blank CD click the pop up menu and select: Ask What To Do.
    Carolyn

  • Digital camera doesn't show up in Finder

    why does my digial camera not show up in Finder?  (camera is Nikon D7000)
    there are situtions when you don't want to download photos, sometimes I'm just doing tests, and want to see photos in the camera instead of downloading them first.. ( at any rate this should be my choice to make, not Apple's....;-)  
    and: I want to see the camera in the FINDER (not iPhoto or any other program where you have to "import" the photos.. I don't like those programs and never use them..)
    it doesn't even show up in Adobe Bridge, for pete's sake.. this is ABSURD..
    sorry, but on the pc you see it right away in Windows Explorer....    no reason whatsoever why the mac shouldn't do this also...

    I changed setting you mention (although I thought that applied strictly to what appears in DESKTOP, not all Finder windows/folders...)   made no difference..  just connected camera, the mac still won't read it...
    I do know about iPhoto, iMovie, i-whatever...  I still would like to see camera in FINDER (or at the very least in Adobe Bridge.. )  what happens is simply that Apple has decided you can only download/see photos in the camera ONLY with APPLE software.. this ***** BIG TIME...   there's no good reason at all why Apple would do a ****** thing like this....  how users pull/view photos from a camera should be the USER'S choice, not Apple's...  (in general I don't like at all programs you have to "import" photos from, you don't get a choice as to where the photos are stored in yr HD..  I have a very large amount of photos, and have a specific organizing system, specif. way of naming the folders, etc.. and I need to choose exactly where the photos are stored.. )
    (to responder who said it's a Nikon issue:  so Nikon decided to design their cameras so you can see photos in Windows Explorer in Windows machines, but they deliberately decided they didn't want them showing up in Finder windows on the mac?  find this a bit hard to believe..   am curious now, so will consult with Nikon, but I do find it hard to believe this is a Nikon decision...)
    thank you...

  • External hard drive doesn't show up in finder or migration assistant

    Hello all,
    I'm new to this forum and pardon me if this question isn't posted in the right category.
    I recently broke my old macbook pro to the point it was inoperable.  I extracted the hard drive which appeared to be in good shape, put it in an external enclosure & plugged it into my new macbook pro via usb and it's not showing up in finder, disc utility or migration assistant.  I'd like to import my old music, pictures & documents if possible. I'm curious why it isn't showing up and how I can make migration assistant work?
    Hope everyone had a good Christmas and a happy new year!
    Thanks,
    Andrew

    Disk Utility – Force Mount Disk
    See mount section.
    Disk Unmount Using Terminal

  • Have a 64GB flash drive that used to work and after an update, now doesn't show up in finder

    I have a 64GB flash drive that worked just fine and Finder would show it when I would insert it, well it seems that after I updated my mac it now doesn't recognize or show the flash drive. I am unsure if the update did something but like I said it worked previously to update and it works on other windows based computers. So is there a way I can fix this?

    Hey Raveybaby
    I would check to see if it shows up in Disk Utility. If it does, run a Repair Disk on it and also mount the flash drive as well. If it does not show up, check other ports as well.
    Disk Utility 12.x: Repair a disk
    http://support.apple.com/kb/PH5836
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Blank data CD doesn't show up in finder window, but I can burn music onto..

    When I load a blank CD (or CD-RW), iTunes opens. But no icon shows up, either in iTunes, in the Finder window or on the Desktop. If I select a playlist in iTunes, the Burn Disc icon appears and I can burn the disc (even thought I can't see it). Once burned, the disc DOES show up on the Desktop and all is well.
    HOWEVER, I cannot move data onto a blank disc. System Profiler says the disc is loaded, but the Finder doesn't see it. I saw something somewhere about running "repair permissions," but I don't know how to do that and don't know whether it's the thing to do, anyhow.
    Thoughts, anyone?
    Power Mac G4   Mac OS X (10.4.6)  

    One possibility is that you have "Ignore" selected for when you insert a blank CD.
    To change this go to System Preferences below the blue , then click on CDs&DVDs. From this box you are able to change the preferences for when a disc is inserted.
    Changing it to "Ask what to do" will prompt a dialog box where you can choose an "action" such as open the Finder. This should allow the disc icon to be visible on the desktop when a blank disc is inserted.
    Hope this helps.

  • Mounted Volumes doesn't show automatically in Finder Window

    Hi, is it a preference that allows me to have access directly to my mounted volume (like in OS 10.5) in the Finder windows? Right now, i have to drag them manually so they show next time i mount them. I would like to see the mounted volumes in the Devices section, below my Hard Drive icon.
    I know i can access them via the Shared section but thats one more click to do… yeah, i'm lazy
    Thanks
    Ben

    Let's take one more shot before we admit defeat...
    Go to Users/yourname/Library/Preferences
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Drag both files to the desktop
    Then, restart.
    (You will have to reset a few finder prefs the way you like them.)
    -mj

  • My windows phone 8 nokia lumia 920 doesn't show up in finder

    I have a macbook pro laptop and want to download some music files to my windows phone from finder. I don't want to use the official windows phone app, where it shows up, but I do not prefer this app because it allows me only to upload full albums to my phone instead of single songs.  By the way, it also shows up in iphoto, but not in finder. How can I solve this?

    You should use windows phone app. only this way. as for me, i cant move photos from lumia 920 to iphoto. i think, promblem in USB3.0. but i dont want belive in it

Maybe you are looking for