Bizarre map behavior

Have a weird thing happening with making a map. I'm getting two Fiji (and other countries). I have tried reducing the number of points I'm putting on, but as soon as I try to put certain ones on, they pop to the duplicate location.
http://wjhamilton.ca/map/iphoto_map.jpg

I have put up a second photo to show what is happening. As you notice there are 2 North/South Americas, two Australias, 2 Fijis. Both Rabi and Kioa are in Fiji. If I remove Rabi and then put it back it still looks like this. Even if I zoom in Rabi will not join to be "one" Fiji with both islands beside each other.
http://wjhamilton.ca/map/iphoto_map2.jpg

Similar Messages

Bizarre Maps Behavior

On the last version of the iPhone OS, using Maps for directions was hit or miss. With iPhone 2.0, directions with maps has hit an all time low for accuracy. I live on Market Street in San Francisco. When testing directions I selected 1 Market Street as a destination. Instead of showing a route that would have taken me straight down Market Street to my destination, it showed me the most harebrained route down side streets that almost doubled the travel distance. I don't know who owns this badly flawed app, but they really need to test before releasing it on an unsuspecting public. Am I the only one who has noticed this problem?

Twice now, Google Maps for iPhone has tried to send me down nonexistent roads. Now that alone wouldn't be remarkable (this IS Google Maps we're talking about :-/) but Google Maps for desktop Web browsers did NOT make the same mistakes.
It took me two weeks and no special testing effort to find these problems. I'm boggled that Google couldn't do better, especially since they already got it right on their desktop version. If TomTom is allowed to sell reliable mapping and navigation software for iPhone, I'll be waiting in line to get it.
Boston locals might be amused by the following maps and images from my phone. One near Porter station, one near the Hynes T stop, and one on a new road in Salem, NH (sadly I didn't think to get a satellite view of that one.)
http://www.kempt.net/users/entropy/misc/badmaps/

Bizarre tabs behavior

After the 10.4.11 update Safari has had very bizarre tabs behavior.
http://www.99.se/attachments/safari/14197d1195126743-safari-3-bugg-bild-2.png
http://www.99.se/attachments/safari/14211d1195172108-safari-3-bugg-bild-1.png
http://www.99.se/attachments/safari/14212d1195172234-safari-3-bugg-bild-5.png
The active image isn't showing, or shows up completely screwed up. I've tried reverting to Safari 2, which fixed the problem, but when reapplying the update the problem comes back. I've tried every magic script I know to repair the system.
I have no plug-ins whatsoever.
Any ideas?

Sorry, no ideas, but I have an odd situation, too. When working with multiple tabs, I click a link that opens a new window, but it doesn't open a new window. It opens in oldest tab with the header (and URL) of the old web page, but the body being the pop-up.
Go figure that one out!

Can't add artwork - bizarre iTunes behavior

Okay - this is bizarre - I imported an album into iTunes 9 (downloaded from the Artist's website). I added the artwork and changed the genre and number of tracks, but these changes only "stuck" to about 4 of the 19 tracks. No matter what I did, I couldn't add the artwork to the 15 tracks that needed it. And - interestingly - if I next/previoused through the tracks on the album, all of the values that I changed would revert to the original values the tracks had when they imported. It was almost as if iTunes couldn't change the ID3 tags in the mp3 files. (Well, I guess it really couldn't when it came down to it.)
I solved the problem by right-clicking all the tracks and selecting "Create MP3 verssion" - essentially duplicating the MP3 files. I was then able to successfully get my changes to "stick" to the new files. (And then I deleted the originals I imported.)
What is this strange strange behavior all about?

There are three common causes for this:
your media are in a format that doesn't accommodate embedded artwork - typically WAV files. To embed artwork you'll need to convert to another format - Apple Lossless or AIFF if you want to preserve lossless quality, AAC or MP3 otherwise.
your media files are read only - to fix this, use Windows Explorer to find the folder that contains your files, right-click and select Properties. On the General tab there's a check box labeled "Read-only" - if this is checked, or is grey (sometimes blue), click the box so that the flag is unchecked and the box is white. Click OK, and then OK again when the "Apply changes to this folder, subfolders and files" option selected. Now try adding the artwork again.
Windows permissions issues are preventing iTunes from updating your media files (there's some anecdotal evidence of a change in this behavior in iTunes 12). See turingtest2's notes on Repair security permissions for iTunes for Windows for advice on fixing this, then try adding the artwork again.

Bizarre app behavior after waking from Sleep Mode

My iMac Core Duo runs like a top. It is fast and quiet. I have no problems with applications, both Universal and PowerPC. I maintain it with everything that I suggest others do in posts.
But, there is this one strange quirkiness that I have put off mentioning because I kept hoping that each new OS X update would address the issue. It has to do with waking my Mac from sleep mode with it logged into my user account. Not every time, but most of the time, if I put my Mac to sleep or it goes to sleep from inactivity while it is logged into my user account, I experience strange application behaviors upon waking.
For example, upon awaking Mail.app will contact my .Mac account and download any new mail that has arrived. But, if I try to open any of this mail, instead of opening, Mail.app will open a new outgoing email addressed to whomever sent me the mail I tried to open. Quitting and restarting does not solve this problem. Other apps demonstrate similar bizarre behavior. To only way to solve the issue is to log out and back into my user account.
However, if I log out of my user account and then put the Mac to sleep from the Login Manager I don't experience this issue. So at night I always log out before putting the Mac to sleep.
Anyone else experiencing similar issues? Any ideas on solving this? Do you think it is a bug in Universal Mac OS X?

Sorry this isn't a solution, rather is a commiseration. Often after my iMac wakes from sleep mode it refuses to see my internet connection. I have to unplug and reset my DSL modem to force the computer to see that it exists.
It sounds like the problem might be related, does anyone have any brilliant suggestions?
Thanks,
Lonnie

Bizarre email behavior

After having successful Mail use for years I now have a strange problem. Mail fails to send my emails using my Cox ISP. I receive emails without any problems. I can send my emails through my gmail account. Here is where it gets weird. I did all of the usual remedies, resetting the SMC, resetting PRAM, and performing verify disk and repairing disk permissions without correcting Mail's behavior. This behavior continued about one more week then corrected itself and I regained Mail send through my Cox account.
After being 'nice' for about 12 days, the problem has returned and I can send only by my gmail account. Any thoughts or suggestions?
Another point of information. My iPad (iOS 5.1.1) Mail sends and receives email OK through my Cox ISP but I always get the message "The mail server 'pop.west.cox.net' is not responding. Verify that you have entered the correct account info in Mail settings." Since I get and send all email without any problems, I just sigh and ignore it.
All of my device accounts have identical account info. I now have iFatigue.
On a better note, my iPhone (iOS 6.0.1) Mail performs properly as expected.

I wish I could help but I still live with the problem on my iMac. My iPhone (4S) has no problem but my iPad would not recognize the Cox accounts. I finally deleted the Cox email accounts and re-entered them. That worked for the iPad. Bizarre!
On the iMac, I apparently at random, I successful send email using either of my Cox email addresses, but usually Mail forces me choose my Gmail account to send. Again, bizarre!

CDP nei results and Flex Connect AP vlan mapping behavior

Hi all,
    We're running controller code 7.4.100.108 and PRIME version 1.3.
    Occassionally, usually as the result of some networking event that causes flex connect AP's to lose connectivity to their controller, the flex connect AP's lose their vlan mapping configuration when they reconnect to their home controller.
    We "think" we have noticed that the cdp nei results are different for AP's that have proper vlan mappings from those that have lost their mappings. For example, in the below example, only AP's 8213 and 8219 have lost their vlan mapping configs (all the AP's below are flex connect):
8107   Gig 1/0/45        177           R T      AIR-LAP11 Gig 0
8106   Gig 1/0/44        163           R T      AIR-LAP11 Gig 0
8216   Gig 1/0/47        136           R T      AIR-LAP11 Gig 0
8213   Gig 1/0/48        135           R T      AIR-LAP11 Gig 0.2
8219   Gig 1/0/46        159           R T      AIR-LAP11 Gig 0.2
8109   Gig 2/0/48        153           R T      AIR-LAP11 Gig 0
...and when the vlan mapping is fixed:
8107   Gig 1/0/45        177           R T      AIR-LAP11 Gig 0
8106   Gig 1/0/44        163           R T      AIR-LAP11 Gig 0
8216   Gig 1/0/47        149           R T      AIR-LAP11 Gig 0
8213   Gig 1/0/48        149           R T      AIR-LAP11 Gig 0
8219   Gig 1/0/46        152           R T      AIR-LAP11 Gig 0
8109   Gig 2/0/48        153           R T      AIR-LAP11 Gig 0
     I've done some reading to try to understand the details of the "Port ID" field of cdp neighbor with AP's but haven't found my answer. I want to know what the significance of the difference between "Gig 0" and "Gig 0.2" is.
     I'm going to lab up an AP and see if I can replicate the behavior and confirm that it is related to the vlan mapping, but haven't gotten to it yet.   If anyone can point me to the nuts/bolts behind that sublte change in "Port ID" it'll help.
     By the way, I'm interested in this problem so that I can quickly identify which of my hundreds of flex connect AP's have lost their vlan mappings after a network disruptive event. I can't find an interesting report in PRIME that will let me see it quickly. So if a scriptable cdp nei command could identify the problem as well, that would be interesting.
     Thanks in advance for the help.

I also have created WCS/NCS/PI templates to push the WLAN to vlan changes in the early morning just I'm case. When users start complaining, it's faster to just push out the commands to all than trying to find what AP lost its vlan setting.
Sent from Cisco Technical Support iPhone App

Why is 2.1.3 causing bizarre adjustment behavior?

I just downloaded and installed 2.1.3. Soon after I tried to adjust an image; but as soon as I moved the shadow slider the image went all wild — white with green lines. I tried another image, and when I moved the highlight slider the same thing happened, and same with contrast. (No problems on PS.) These images are on a Compact Flash card previously downloaded where other images behaved normally during adjustment, so it is not card corruption. (Camera is Nikon D300)
Is this a known issue on v 2.1.3? Or is there something idiosyncratic going on here? I would be grateful for any advice. I do minimal adjustments and prefer to stay in Aperture.
Thanks, Susan

This is my first use of this thing and I can't figure out how to ask a question, so I'm not replying I'm
asking. I am experiencing bizarre responses to various sliders in the adjustment inspector, shadows,
contrast and others. I have had no problems like this since I got the system last June, importing only
raw digital images. However for the last two weeks I have been scanning b&w negatives at 6400 dpi
as tiff files, which it turns out are at least 60MB and often 120MB in size. All of the Aperture problems started since this. I do not understand this but I'm wondering if the size of the files is something
Aperture is not comfortable with? I'm getting half black or sudden all black screens, occasionally
colored constructions, and complete shutdowns requiring relaunching three or four times every couple of hours. Any response would be helpful. I really like Aperture and hope to solve this. Thank you.greg

Bizarre mouse behavior on rollOut - bug??

I built a custom cursor out of a swf file and I am applying
it on rollover to a specific item. That part works fine. The
problem is the on rollOut event (or mouseOut I've tried both same
exact behavior) fires CONTINUOUSLY when I move the mouse to the
RIGHT. It only fires when I move the mouse to the right. Let me
give an example:
app starts, normal mouse cursor
i roll over an item, swf cursor applied
normal behavior is for swf cursor to be applied over the
item, and off when rolled out of it.
if i move my mouse to the right while still OVER the item,
the event fires for every pixel i move even though i haven't rolled
out.
if i leave the cursor on and move off the item and move
around in the application, the event still fires every single pixel
i move to the right. not only does it fire - it fires a rollout
event up the entire chain of my application. it fires an on rollout
event for every single component in the application including the
APPLICATION itself!!
i'm going nuts on this one, anyone have some insight? the swf
cursor is nothing fancy, just a bitmap, text, and one small little
animation with no scripts.

The issue seems to be resolved (after a longgggg time of
debugging) to be related the the X and Y offset parameters of the
setCursor method. My cursor was designed to have no offset so i
left it blank. I tried 0,0 but that didn't fix the problem.
Putting in any number (1,1) seems to fix the problem. this
must be a bug of some sort in the constructor for this class. Can
any of the Mods/Devs mark this as a bug to investigate?

Bizarre flash behavior browser vs projector in Firefox

I have a rather strange problem and it looks to be browser
dependant. The project was made for player 8 with action script 1.0
and is linked below. When viewing this project as an exe file, the
behavior is exactly how it should be, however when viewing it
through a browser via firefox, the behavior is completely
different. Flash will only pick up one click at a timem meaning for
every button or link I click on, on the swf, I have to first click
outside the flash document to change the focus back and forth to
the swf otherwise the input is ignored. This behavior is not
present in IE. The first click is ignored in IE but once flash has
the focus, it works as it should from then on. IE was tested with 6
and 7. Firefox version 1.5
The zipped exe file
http://www.hesaa.org/TestPages/tcnj
- 2007 v3f.zip
The embed swf file
http://www.hesaa.org/TestPages/TCNJ
- 2007.html
Update: I've updated to flash plugin 9, no change. I've also
tried this same file on Firefox 2.0 and it works without any
problems, so the problem must be related to firefox 1.5

Hi James,
Thank you for sharing your solution with us. It will help other users with a similar issue.
Thanks,
Preran

Bizarre CS6 behavior

Recently my CS6 has exhibited a weird behavior--when I open a jpeg, for example, only half of the file is displayed--the other half appears as a blank area in the file display area. When I click on the blank space, the rest of the file will appear. Windows 7 up to date, 9 GB Ram, i7 processor. This just started a couple of weeks ago and I have no idea what's up. I've been considering uninstalling and reinstalling but fear for my plugins and understand that reinstalls are not straightforward. Any ideas???
Below is a screenshot cexample

Mylenium wrote:
or turn off OpenGL in the prefs.
Just for reference, it's not called "OpenGL" in the prefs with Photoshop CS6. You might want to change the advice to the following:
... or turn off "Use Graphics Processor" in the prefs.
-Noel

Maps behavior differs between devices

This morning I went to go pick up an iPhone 5, and I used the maligned Maps program on my old iPhone 4 to get to the store. It wasn't that bad -- but when I got the new phone, the maps program worked differently on the new phone?
Specifically, on the old phone, I was able to swipe side-to-side on the individual 'green-sign' directions, to step back and forth to see what the next turn would be.
On the new phone, I was stuck on the current step in the directions -- no swiping at all. All I could do was go back to an overview or a list of all the directions.
What's the deal? I should be able to swipe between the direction steps, shouldn't I? It certainly was a LOT easier to work with that way. Being stuck in close view on the current step is no good.
Has maps been updated? Maybe my old phone had a newer version than the new phone?
Thanks,
Bob

Any word on the status of this Bug Fix?
Why is the Swipe feature only available when not using your Current Location? I would really like the Swipe feature to be available regardless of the method of search (Current Location versis typed location).
It appears that cetain functionality is mutually exclusive.
If inputting two locations locations, Swipe feature available but not turn-by-turn voice navigation or ETA statistics.
If using Currentl Location, just the opposite features are available.
All these features should be available all the time. Seems like a great feature.
Next steps in Map view?

Bizarre RMI behavior

hi.
i have a very bizarre anomaly occurring and i am at a loss on where to even begin looking.
i have a client-server application that uses rmi for the network communication. the server is an app that listens for inbound tcp connections and then looks for a registered client that can service the request. clients obtain a remote reference to the server that they use to register a reference to themselves. they also use the remote server ref to put themselves in various availability states.
the server uses the remote client references to signal appropriate clients of some pending work.
the server uses a background 'ping' thread that periodically invokes a lightweight method on each client reference to ping each remote client. if this 'ping' doesn't return in a timely fashion (2sec) the remote reference is purged and the client must re-register with the server.
everything works perfectly for the most part except occasionally the 'ping' will timeout. some clients reside in the same bldg as the server yet others reside in a different state half way across the country. on average, the round-trip time for a 'ping' is around 120ms for remote clients and less than 50ms for clients local to the server.
what i usually find is that the timeout occurs in batches - usually all the remote clients will timeout but not the local suggesting a network issue. however, occasionally a group of remotes will timeout, all the locals will be ok, the next remote will be ok but the last remote will timeout... other times a local client will timeout...
i might add that this server is running on linux and the clients are all running on windows xp. i have another identical client-server setup that is identical except that all these clients also run on linux. at first, my app exhibited the exact same issues with timeouts on the linux-linux system. i searched the java bug database and discovered the issue with reverse dns doing a lookup when it creates an InetAddress. i then configured all of my linux clients to not use dns and the problem went away and i have yet to experience a single timeout since.
i'm blaming it on the network but my network engineer is blaming it on my app. he's run various diags on the network and everything checks out ok (ICMP ping times are fine during the timeout). maybe i should just blame it on windows!
i've tried turning on various rmi logging but there's so much junk in the log i don't know what to look for.
any help would be greatly appreciated!

thanks ejp for the reply.
it turns out that on the windows platform i need dns - i do not on the linux side. i have added the internal ips that the jvm system may be trying to reverse lookup to the the dns server - it made no difference. i then added all the ips to the etc/hosts file of the client - again no help. the server is configured to not use dns. i'm not entirely convinced it is dns - i was at first but if it were then these changes should have solved it - no?
i agree with you that 2 seconds may be a tad on the short side for a timeout across state boundaries - originally this was to all be in the same bldg so 2s was an eternity.
-ten6dsix

Bizarre ftp behavior in DW8-- check this out

I'll preface this by specifying that while using MX2004, I
had no problems with ftp whatsoever; I maintain a massive,
constantly-changing, image-intensive site and I simply do not have
time to select updated/added files one-by-one to upload; with
MX2004, I could simply select the main "web" folder, hit "put", and
all modified/new files would be uploaded automatically..........not
so in DW8:
when I try to use "select newer local files," ususally a box
pops up referencing a temp file ("putting temp2342.htm"), and
either nothing happens, or my ENTIRE site, with all subdirectories
is selected for upload; now, I've tried as many different things as
I can think of in terms of modifying settings in the site
definition, and I've noticed the following: if I modify the remote
root directory in the site definition settings, and then attempt a
"select newer local files," it will actually work; i.e. it will
actually scan for newer files, and select new/updated files
correctly; however, if I then try to do this a second time, nothing
will happen, like before;
each time I change the remote directory in the settings,
however (say, to "/web" or even just "/"), it seems to work once,
and then stops; I can restart the program, etc. and the
functionality doesn't seem to return unless I change the setting
again and again........
if I can't get some sort of solution to this issue, I will
likely go back to MX2004, which I REALLY do not want to do;
***DW developers, please take note: from searching on the
web, I see that LOTS of people seem to have similar problems with
the revamped FTP functionality in DW8; for God's sakes, just
re-implement the old MX2004 ftp behavior...or something that WORKS
like before.

quote:
Originally posted by:
Newsgroup User
I'm trying to reproduce your behavior in DW8 on both the Mac
and the PC. I
cannot.
Can you give me an explicit set of steps that cause the
symptoms to occur
every time, please?
Does this happen on every site or just one?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
ok, sorry for the much delayed response; I've been
experimenting with different settings, trying to get to the root--
no pun intended-- of the problem. It seems to me that this problem
with the "scan for newer files" function relates to my particular
ftp server config, and I can sometimes get it to work by modifying
the remote root directory.
Without specifying a remote root dir-- which I did not have
to do in MX2004--the ftp server displays four main folders: "cgi",
"files", "logs" and "web", with the "web" folder containing the
actual site files. On the local end, I usually specify a main
folder, eg. "main web site" that contains my templates directory,
and a corresponding "web" directory (with the local site files).
When a remote root directory is not specified, the "scan for newer"
function usually does not work. HOWEVER, if I specify "/web/" as
the remote root directory, and change my local root folder to
"/web" as well, the scan function DOES work.
I don't like this config, however, because my local site is
defined as being rooted in the local "web" folder, and thus, I
don't see my template directory, etc.
Here is the strange part, though: if I then go into the site
manager and change the remote root to "/" and change my local root
back to "main web site," the cache will be recreated, and the "scan
for newer" function with actually WORK. This is where it's finicky
though, because if I shut down the program and restart, the
scanning behavior will then revert to the previous behavior (cf.
initial post).
Something I've learned is that DW is unable to write to the
"base root" directory-- ie. "/"--but, of course, can write to the
"/web/" directory; so I'm thinking it having an issue creating a
timestamp, or something along those lines; however, this still
doesn't explain why it would intermittently work as specified in
the paragraph above.
Here's a question: is there a way for me to specify "/web/ as
the remote root directory, and maintain the "main web site" dir as
the local root folder (so I can see my templates folder, and the
underlying local "web" directory)? This seems to be problematic,
b/c if I try to upload with this config, DW wants to create another
"web" directory within the remote "web" as the local and remote
file listings are not on the same level, so to speak.
Sorry for the length, but I'm trying to supply as many
details as possible. Finally, I have not yet tried DW8 with my
other sites, so I'm not sure if it's unique to this site (I have a
feeling that it is, though); my hosting provider is XO
Communications, if that offers any insight into this
situation.......

Bizarre Speaker Behavior

My speaker sound has disappeared, unless I install a set of headphones into the microphone jack on the front of the computer, then it's all happy. The headphone jacks seem to work fine. I restored the computer to the factory-loaded condition, reloading Windows7 last night, but the problem is still there. There doesn't seem to be anything in the BIOS that can result in this behavior, and I'm stumped.
I have a dv7-3060US model and it's only 6 months old. Any help would be greatly appreciated.

I have the same issue with my Pavilion dv7 2022tx!
It really sucks and I am not happy with this as I have has this ever since I got the laptop....
Please if you can help me out, I would appreciate it.

Bizarre map behavior

Similar Messages

Maybe you are looking for