Biztalk 2010 BAM excel

I have configured BAM successfully and attempting to load excel add-in Microsoft 2010 64 bit
I have followed:http://www.microsoft.com/download/en/confirmation.aspx?displaylang=en&id=9970
I have modifed the xla to use ptrsafe for declare but am getting compile error on setTime.. There has got be a better way to get plug-in to work without re-writing
What am I missing ??
Thanks Bryan

Bryan as per this bug report the BAM Excel Add-in in BizTalk 2010 works only with 32 bit Excel, and doesn't work
with 64 bit Excel.
Please mark the post answered your question as answer, and mark other helpful posts as helpful, it'll help other users who are visiting your thread for the similar problem, Regards -Rohit Sharma (http://rohitbiztalk.blogspot.com)

Similar Messages

Enable SQL Notification Services for BAM alerts , Biztalk 2010

Hi,
Enable SQL Notification Services for BAM alerts is greyed out.
I need to enable bam alerts in BizTalk 2010.
Regards,
Sharmishtha

Hi,
If I understand correct, your problem is that the BAM Alerts configuration is greyed out in the BizTalk Configuration tool. If this is the problem it's due probably because you don't have the SQL Server 2005 Notification Services installed. Notification
Services is required for BAM Alerts feature.
You can take a look at the following link, even it's for multi-computer installation:
http://social.technet.microsoft.com/wiki/contents/articles/1888.install-and-configure-bam-business-activity-monitoring-in-a-multi-computer-environment.aspx
Best regards.

No able to select BAM Portal in BizTalk 2010 Installation Wizard

I am trying to set BAM for BizTalk 2010.
I got it to the point where I have created activities, views and deployed them to SQL. Both BAM databases are there: BAM archive and Primary Import table. But I want to view data through BAM website, upon research I realised BAM website can be created after
installing BAM portal but I am not able to select the check box in installation wizard.
Please note IIS is already started and configured as per following link:
https://social.msdn.microsoft.com/Forums/en-US/c99e608b-2c29-4ef1-889c-432c7117f247/bam-portal?forum=biztalkgeneral
Also gone through:
https://social.msdn.microsoft.com/Forums/en-US/85c3b584-9bc8-41c9-8c10-e2a8349ddc3f/bam-portal-missing-from-biztalk-configuration-tool?forum=biztalkgeneral
Appreciate your help!
Thanks,
Prabhdeep

Hi,
BAM Portal runs only runs on a 32-bit mode. If you are installing IIS on a 64-bit machine then you must ensure that ASP.NET 2.0 is enabled
on 32-bit mode.
Ensure you have all the pre-requisites in place as per this blog. BizTalk
2010 Installation and Configuration – Enable Internet Information Services (Part 1)
Rachit

New line character (/n ) getting introduced in the response XML in Biztalk 2010

Hello,
In one of our enviornment, we have started facing an issue that the response XML does not get structered correctly, hence when the response is finally redenered, there is a /n in the response fields. this is for all string fields that do not have data .
e.g.
If you see the sample below, FName field has data and hence is structered correctly, however HairColorCd does not have data.
The opening and closing tags of HairColorCd are on different lines when the xml response is opened in a text editor, and when opened in IE, there is a space. When the BizTalk (hosted as a WCF )responds to the caller application there appears a '/n ' in the
value of the field.
The correct value should have been null, i.e. ""
<FName>LISA</FName><HairColorCd>
    </HairColorCd><HairColorDesc>
    </HairColorDesc><EyeColorCd>
    </EyeColorCd><EyeColorDesc>
    </EyeColorDesc>
ANy ideas on why this is happenning?ALl other enviornments(with same code) is working fine.

Hi Rachana,
I have faced the same issue last weeks with BizTalk 2010. This happens with versions of BizTalk 2006R2+ and if you are loading the message using XML Document in some stage. So if that is the case, please check everytime you load the content of the
message using XMLDocument and do it this way:
Xmldoc= new System.Xml.XmlDocument();
Xmldoc.PreserveWhitespace=false;
Xmldoc.Load(CONTENT); // or Xmldoc.LoadXml(CONTENTAsSTRING)
Xmldoc.PreserveWhitespace=true;
YourBizTalkMessage=Xmldoc;
Do it in this sequence and your problem should be solved.
Regards, Mazin - MCTS BizTalk Server 2006

RNDisAssembler issue in Biztalk 2010 or 2009 accelerator for RosettaNet

We are receiving 3C3 PIP messages from a traing partner. But from time to time, below error pops out.
Source module:
RNDisAssembler
Correlation information:
Description:
Receive pipeline rejected incoming message
due to the following RNIF exception:
UNP.SCON.VALERR : A failure occurred while validating the service content.
Details:
Data at the root level is invalid. Line 3, position 1.
It's just once in a while. And I can't see any perceptible exception in the problematic message. This is so weird. I would assume it's a bug of Biztalk. Please refer to the post
http://support.microsoft.com/kb/955240/en-us, which provide a hotfix for BizTalk Accelerator for RosettaNet 3.5. Is there a counterpart for Biztalk 2010 or 2009?
Thanks
Gou Jun

Hi,
The resolution to this problem is descrived here:
http://blogs.msdn.com/b/biztalkcpr/archive/2011/03/05/btarn-app-pool-settings-for-biztalk-2010.aspx
"Here is a some additional information regarding extending BTARN 2010 with new PIP’s. The artifacts generated are going to be .Net 4.0 unless Visual Studio is configured to do otherwise. This means along with setting the application pools for the
32-bit the .Net setting must be set to match. "
Sandro Pereira
DevScope | MVP & MCTS BizTalk Server 2010
http://sandroaspbiztalkblog.wordpress.com/ |
@sandro_asp
Oporto BizTalk Innovation Day | 14th March 2013 – Oporto, Portugal
Please mark as answered if this answers your question.

Attachment File non-English Name DISAPPEARS problem in BizTalk 2010 SMTP Adapter

Hello ,
I'm using BizTalk 2010 SMTP Adapter for sending mail with attachments by setting them via property SMTP.Attachments
//Attachment
msgEmail(SMTP.Attachments)= AttachmentList;
I have files in several languages (In English and in Russian partialy) for the example
My attachment list looks like this:
"C:\Temp\Files\EnglishNameFile.xml | C:\Temp\Files\RussianFileName_РусскоеИмя.xml";
After the sending Mail with this attachments the second file (it's name partialy in Russian) received without this part name
(The non-english part of name is DISAPPEARS)
like this:
RussianFileName_.xml ( must be RussianFileName_РусскоеИмя.xml)
The NON-English part is DISAPPEARS!!!
And if i have file that doesn't have latin latters (non-english) at all than BizTalk SMTP Adapter change name
to default one like ATT41233.xml
I found this behaviour occur in other non-english languages also!!!
Unfortunately i'm not found any info about this
Any help would be very
much appreciated
Vadim

Refer to this link -
http://social.msdn.microsoft.com/Forums/en-US/163a47cf-db31-49a5-9ee3-ce9272ba24ff/setting-contenttransferencoding-in-dynamic-smtp-port?forum=biztalkgeneral
There is an option of the Multipart message that controls the filename and the charset used to control how the attachment is treated, including content-transfer encoding.
Regards.

BizTalk AS2 receive location (500.0 error) reported by eternal party when trying to reach BizTalk 2010.

Hi There -
We are facing AS2 connection problem with one of our customers. Following is scenario.
Problem Scenario –
We BizTalk 2010 server with which we are trying to connect one of our customer’s bank for secure communication.
Our UAT box has been done with a successful test connection with that bank however when we move to production server, whenever the Bank try to send any simple .txt file via AS2 protocol, we do not receive the file and bank receive an error following
message .
<div><fieldset>   <h2>500
- Internal server error.</h2>
<h3>There is a problem with the resource you are looking for, and it cannot be displayed.</h3>
Bank has AS2 setup on following environment.
AS2 Software Used
Connect Enterprise
AS2 Software Provider
Sterling Commerce (IBM Mail Slot)
Platform on which AS2 Software is installed
AIX
I have compared the UAT and Production servers AS2 receive URL configurations and these are completely alike.
Whenever I try browsing the virtual directory setup for AS2 from IIS 7.0 or from
internet explorer with hostname and virtual directory, I get 500.0 internal error which following post says is absolutely fine, this should not be a problem.
XXXXXXX
I have setup the IIS Log trace. Following are the traces from IIS.
Action Performed to resolve the issue.
Compared the UAT and Production server settings both are alike.
Setup the AS2 receive with reference of following URL .
http://msdn.microsoft.com/en-us/library/bb727975.aspx
http://biztalk-dish.blogspot.com.au/2012/07/guidance-on-edi-over-as2-in-biztalk.html
http://www.biztalkbill.com/Home/tabid/40/EntryId/66/Configuring-BTSHTTPReceive-dll-to-work-on-IIS-7.aspx
Installed the party certificates by referring following URL
http://msdn.microsoft.com/en-us/library/aa559902.aspx#step5
App Pool a/c and (Isolated and Inproc) host a/c and the receive pipline host a/c are same and certificates has been installed by loggin to server with same account .
Firewall ports are open to accept the traffic, I have to log from network team.
I tried following URL.
http://go4answers.webhost4life.com/Example/http-receive-url-without-78425.aspx (I have suffix the DLL name to the URL which party has to reach.
Example - http://XXXXXXX/EDIIN/BTSHTTPReceive.dll
http://hostname/virutalDirectory/BTSDLL
I have tried resolving 403/ 405 error which sometimes reported in my IIS error log, which generally arrive after reset of IIS 7.0
Using URL -
http://go4answers.webhost4life.com/Example/btshttpreceivedll-405-error-57131.aspx
http://biztalk-diary.blogspot.com.au/2010/05/btshttpreceive-error-405-method-not.html
IIS errors has been referenced using following Url
http://support.microsoft.com/kb/943891/en-us
following are the error logs from IIS 7.0 log file, whenever party sends any message to our server.
2013-12-14 19:02:59 10.83.241.83 POST /EDIIN/BTSHTTPReceive.dll - 80 - 10.83.251.4 Jakarta+Commons-HttpClient/3.0-rc4 500 0 0 9812
2013-12-14 19:03:48 10.83.241.83 POST /EDIIN/BTSHTTPReceive.dll - 80 - 10.83.251.4 Jakarta+Commons-HttpClient/3.0-rc4 500 0 0 343
2013-12-14 19:04:48 10.83.241.83 POST /EDIIN/BTSHTTPReceive.dll - 80 - 10.83.251.4 Jakarta+Commons-HttpClient/3.0-rc4 500 0 0 406
Sometimes I find following entries though
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken
2013-12-14 20:10:55 ::1 GET /EDIIN - 80 - ::1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+.NET4.0C;+.NET4.0E)
301 0 0 453
2013-12-14 20:10:55 ::1 GET /EDIIN/ - 80 - ::1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+.NET4.0C;+.NET4.0E)
500 0 193 15
Any advice will be a great help.
Please Note: We have setup other virtual directories for receive HTTP connection using (BTSHTTPReceive.dll) file and these connections has been setup using same user account and are working perfectly fine.
I repeat,
>>           I have compared all the configurations for AS2 receive location with other setup on Production for other customers ( this is similar)
>>           I have cross checked the setting with UAT box where connection with this Bank is working absolutely fine but in production it is NOT and configurations are similar.

Hi,
It maybe windows firewall issue. you can try create a Windows Firewall exception if
Windows Firewall is running on your server. And please refer the blog about 500 error in iis which might helpful:
http://support.microsoft.com/kb/942031/en-us
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Duplicate File issue using FTP adapter - BizTalk 2010

Hi We encountered an Issue of picking Duplicate files in BizTalk 2010 from the FTP Location. Need your assistance on this.
Mainframe sends multiple files a 0 KB file to FTP and BizTalk picks during a particular service window using FTP Adapter.
Receive Location has a pipeline component which decodes the MF file(EBCDICRow format).
Send Port transmits the file which is decoded in the Receive location. There is no mapping or orchestration involved.
When 2 files are placed in FTP Location. BizTalk Transmits the files successfully
No suspended messages in BizTalk but we see below error in event log. we tried reproduce the issue but no luck.
Host Instance running FTP Location is Clustered
There was a failure executing the receive pipeline: "XXXX.XX.Pipelines.Receive_XXX_TransactionsMC_passthru, XXX.XX.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=c2d1f476d5c2f97d"
Source: "EbcdicRowDeCode" Receive Port: "XXX.XX.MCSTransactionsMC" URI: "ftp://XXXXXXXX:21/'XXXX'/MCSDT.DEFKOP.R001.D*.T*" Reason: Unable to cast object of type 'Microsoft.BizTalk.Streaming.BasicStreamWrapper' to type 'XXX.BizTalk.Pipeline.Components.Streams.V3.VirtualStream
MF Puts below Files at FTP Location
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T002100
BizTalk Picks ( at specified Service window) and Transmits as
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T002100
Regards
-Sri

Hi Sri,
There could be two reason for such a behavior:
1) Using Non-Clustered Hosts: It is always recommended to use the clustered host for FTP adapter. Because FTP don't allow
any locking mechanism on the files so in case of non-clustered with multiple host instances you might receive same file multiple times through different host instances.
2) If the original document is still being written to the FTP server by the host application, the FTP adapter cannot
delete the document and will retrieve another copy of the document at the next polling interval that is configured for the receive location. This behavior causes document duplication to occur.
Workaround could be:
Configure the host application to write to a temporary folder on the same hard disk as the public FTP folder and to periodically move the contents of the temporary folder
to the FTP folder. The temporary folder should be on the same hard disk as the public FTP folder to make sure that the move operation is atomic. An atomic operation is an operation that is functionally indivisible. If you write data to the public FTP folder
by using the BizTalk Server FTP adapter, you can do this by specifying a Temporary Folder property in the FTP Transport Properties dialog box when you configure a send port. If you specify a Temporary Folder property, make sure that this folder is on the same
physical disk as the public FTP folder.
Configure the FTP receive location to operate within a service window when the host application is not writing data to the FTP server. You can specify the service window
when you configure the receive location properties.
Refer: Known Issues with the FTP
Adapter
Rachit
Please mark as answer or vote as helpful if my reply does

How to define the character set of an outbound EDI batch in BizTalk 2010?

I have some EDIFACT files with a character set of UNOC though lowercase strings and umlaute should be allowed. These files should be batched in an outbound EDIFACT file. But the batching orchestration of the related send port throws some validation errors.
If I convert the strings to uppercase characters everything's working fine. So it seems that the outbound batching orchestration uses the UNOA character set internally for the validation of the EDIFACT files...
How can I change the character set of the outbound batching orchestration in BizTalk 2010? No settings found regarding the character set of outbound batching orchestration in the party and agreement configuration so far. Thank you

Hi Philipp,
To define a character set in EDIFACT,
UNA segment is used. After defining see, How Validation of an EDI Interchange Is Configured and Outbound
EDI batching in BizTalk Server
Maheshkumar S Tiwari|User
Page | http://tech-findings.blogspot.com/

Can we develop a solution in Visual Studio 2012 and still deploy it on BizTalk 2010?

Can we develop a solution in Visual Studio 2012 and still deploy it on BizTalk 2010? or Is it that solutions developed in VS 2012 have to be deployed only to BizTalk 2013?
Thanks

BizTalk 2010 projects are not compatible with Visual Studio 2012. To use Visual Studio 2012 with BizTalk 2010 projects, you must install
BizTalk 2013 on the computer that has Visual Studio 2012. The first time you open a BizTalk 2010 project, it is automatically upgraded to the BizTalk 2013/Visual Studio 2012 project system
Refer
this.
Please mark it as Answer if this answers your question
Thanks.
Mo
The contents I write here is my personal views, not the view of my employer and anyone else.

BizTalk 2010 - WCF-Custom Adapter with sqlbinding - rror was encountered while attempting to transmit the message

BizTalk 2010 RTM version with SQL 2008 R2 .
An intermittent issue with the WCF-Custom adapter with sqlbinding, calling a SQL stored proc as below
Message gets suspended in BT Admin console with "An internal server error was encountered while attempting to transmit the message" .
Event log shows
A message sent to adapter "WCF-Custom" on send port "xxx" with URI "mssql://server/db?" is suspended. Error details: Unknown Error Description
Any advice please. Thanks
Sullu.
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks

Hi Chen
Is there any update on this please ?
I have applied the latest CU and have noticed the following issue.
BizTalk 2010 Enterprise Edition with BizTalk 2010 CU6 and CU3 for BizTalk Adapter Pack works fine , no issues noticed.
However ,
On a DEV VM ,BizTalk 2010 Developer Edition with BizTalk 2010 CU6 and CU3 for BizTalk Adapter Pack still gives the error mentioned in this post.
In addition Microsoft BizTalk Adapter Pack ,Microsoft BizTalk Adapter Pack(x64) & WCF LOB Adapter SDK are also installed .
Below is the Error message.
Message gets suspended in BT Admin console with "An internal server error was encountered while attempting to transmit
the message" .
A message sent to adapter "WCF-Custom" on send port "xxx" with URI "mssql://server/db?" is
suspended. Error details:
Unknown Error Description
Could you please check and advice what needs to be done to resolve this ? Thanks .
Regards,
Sullu
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks

Failover cluster for BizTalk 2010

Hi friends,
I need to understand step by step configuration for failover for biztalk 2010.
use of failover cluster manager from windows os and how its working from biztalk.
Please do share with me the right url.
Thanks all.

Similar question was asked recently in our forum:
http://social.msdn.microsoft.com/Forums/en-US/18239da7-74f2-45a7-b984-15f1b3f27535/biztalk-clustering?forum=biztalkgeneral#4074a082-8459-420f-8e99-8bab19c8fba2
White paper from Microsoft on this context shall you with step-by-step guidance of failover cluster for BizTalk 2010.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=2290
Also refer this blog where authors in series of his post guides with the steps required:
Part 1: BizTalk High Availability Server Environment – Preparations
Part 2: BizTalk High Availability Server Environment–Domain Controller Installation
Part 3: BizTalk High Availability Server Environment – SQL & BizTalk Active Directory Accounts
Part 4: BizTalk High Availability Server Environment – Prepping our SQL & BizTalk Failover Clusters
Part 5: BizTalk High Availability Server Environment – SQL Server 2008r2 Failover Cluster
Part 6: BizTalk High Availability Server Environment–BizTalk 2010 Failover Cluster Creation
Part 7 – BizTalk High Availability Server Environment –BizTalk 2010 Installation, Configuration
and Clustering
Par 8 - Adding Network Load balancing to our High Availability Environment
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

BizTalk 2010 Load Balancing Not So Balanced

Ok here's our scenario.
1. One Orchestration running under HostInstanceProcess on 3 servers in the same Groupe using 3 different domain accounts
2. That Orchestration has a reference to Utilities dll, which in turns calls a stored procedure using ADO.net code
3. We run that orchestration, it gets around 2000 de-batched messages and for those 2000 messages it calls that ADO.net code
4. Back in that database we run sp_who to check how many connections are made from each machine, and we find that over 60% connections are always made from one particular BizTalk machine and it's not one off, I've seen it atleast 7 to 8 times, that machine
always has most number of connections, for example if there are 120 connections in total, 80 connections are from Server 1 while rest from others.
5. We put a Max Pool connections in the connection string to 250 (default is 100) but that doesn't make any difference.
6. This interface is facing a lot of connection time outs from the database, hence this investigation is done
7. The same interface works perfectly fine on BizTalk 2006 R2, it's connecting to the same database (so can't be a database issue), it has 2 servers, which make almost same number of connections to the DB when I check with sp_who, so load balancing seems
to working as expected in BizTalk 2006 R2.
So my question, I know BizTalk is supposed to do load balancing in a round robin fashion which should equally distribute the load but in my example in BizTalk 2010, it's not doing that clearly, it's overloading one server with almost 70% of the requests,
what could be the reason for this? Host instances are set-up similarly in all servers. Any help greatly appreciated.
Regards
Syed

BizTalk load balancing works in Round Robin fashion only for the new messages, while in case of instance subscription message will be routed to server holding dehydrated orchestration instance.
So the server having dehydrated instances will receive the correlated response along with the new incoming message.
So you can see one server slightly overloaded.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Zipping files/Compressing files in BizTalk 2010

Hi all!
I have a BizTalk solution that needs to pick up all files in a directory, zip them up, and send them to a customer. I'm using BizTalk 2010.
I tried using a 3rd party adapter I found on CodeProject but it would not work reliably. Are there other options out there for BizTalk 2010?

Hi Sean,
Check out the article,
http://social.technet.microsoft.com/wiki/contents/articles/11679.biztalk-list-of-custom-pipeline-components.aspx here you will find zip pipeline component.

BizTalk 2010 Simple orchestration

This jos has to pick up file from one server location to another server (ftp)
I need to accept request XML where I need to specify
1.
type (inbound , outbound)
2.
FileLocation ( where to pickup file from this foler)
3.
Date (it has to look file’s based on given date, if date is not given has to pick all files in FileLocation folder)
I
I'm more concern about 2.  FileLocation
setting in orchestration? Please explian this area deeply. other is okay.
Thanks indeed.

Hi Raj,
“I'm more concern about 2.  FileLocation
setting in orchestration? Please explian this area deeply.”
I am not sure why you need Orchestration; you can achieve your requirement which you mentioned here with Receive Port/Receive Location and with filter filter on send port. Anyway if we don't the complete
requirement which may have some business process to be applied on the received message, for which you may have choose Orchestration.
You need to configure Receive Locations which would reside I Receive Port. In your Receive Location, you would configure the folder location from where
you want to receive files.
MSDN: Adding a Receive Location Using BizTalk Explorer
Once Receive Location has been configured, on a standard Orchestration configure the receive port. (Note for others : I don’t want to confuse further by explaining by Direct-bound orchestration and other
ways).
MSDN: Using Ports in Orchestrations
I would suggest you to read any good BizTalk book, something like “BizTalk 2010 Recipes - A Problem-Solution Approach” to start working with
BizTalk.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Biztalk 2010 BAM excel

Similar Messages

Maybe you are looking for