Biztalk 2013 R2 ESB toolkit support and Licence issues

Hi,
Currently we are using Biztalk 2013 R2 standard version and have not installed/configured ESB toolkit yet. Now i am exploring the options to use the ESB toolkit as it is pretty good for the exception management and it comes with nice portal as well.I have
used the ESB in the past with Biztalk 2010 so i have a favor for the toolkit.
But one of our consultant said that the ESB toolkit is not supported by Microsoft for the standard version and it is supported only with enterprise version of Biztalk. He also mentioned that once we configure ESB with standard version Microsoft does not
support ESB and also the entire Biztalk server So i am afraid of that and thought of validating the information with right people.
Can someone please answer the below questions for me?
Can we use ESB toolkit with Biztalk standard version? If so how about support from Microsoft? Does Microsoft support at least production server OR not?
Do we need enterprise version only for this?
I used ESB with Biztalk 2010 in the past and though there are minor issues i personally like it . But what are your thoughts of using ESB?
Here are the technologies we are using
Biztalk 2013 R2, Visual studio 2013 and SQL server 2014. Just to mention Visual studio is not available in test and production servers.
Thanks
JB

Hi,
Why you want to use BizTalk Standard Edition in Production Environment?
BTS Standard only run on a single BizTalk server with a maximum of two CPUs, maximum of five "BizTalk Applications",
However, Enterprise does not have such limitations
Yes, it is not supported and it has not been extensively tested by Microsoft on Standard Edition, but it doesn't mean you can’t
install it.
From BizTalk
Server: ESB Survival Guide has this requirement:
BizTalk Server 2010 Enterprise/Developer Edition
Understanding is:
ESB toolklit uses one of the five applications that can be deployed on BizTalk 2010 Standard Edition
ESB toolkit will work on BizTalk 2010 Standard Edition, but it's not supported
Requirements for ESB 2.2 with BizTalk 2013 is not specified as such, but I suspect the same limitation applies.
Refer: BizTalk
ESB Toolkit 2.1 on BizTalk Standard Edition environment , does it work ?
Rachit
Please mark as answer or vote as helpful if my reply does

Similar Messages

EDI Clearinghouse using BTS 2013, need ESB toolkit ?

Hi ,
We are thinking of building EDI Clearinghouse for Third Party Health Care Administrators (TPA), Payers and Individual Providers with HIPAA compliance. Please guide me
1) Is BTS 2013 is right choice to build clearinghouse?
2) Do we need to use ESB toolkit in order to make new parties addition to the clearinghouse seamless and not manually creating parties, send ports and receive ports each time we add new parties in to the system?
3) Link to any proven clearinghouse architecture using BizTalk that is running in production
4) Is Microsoft Azure BizTalk Services (MABS) is ready to take up all the cloud challenges that Clearinghouse would throw to it ?
Thanks in advance
Vivek

Hi Vivek,
1) Is BTS 2013 is right choice to build clearinghouse? – BTS 2013 is
alsoproduct which can handle clearing house cases. BizTalk has all the capabilities to handle the integration and add different
parties/clients dynamically. Many of the clients are using BizTalk specific to clearinghouse and HIPAA. But if you’re evaluating another products and you have a specific requirements which you want to implement in clearinghouse and HIPAA and see which tool/product
can better server that purpose.
2) Do we need to use ESB toolkit in order to make new parties addition to the clearinghouse seamless and not manually creating parties, send ports and receive ports each time we add new parties in to the system? –
ESB toolkit does provide options to add parties seamlessly. I think you’re still in product/tool evaluation phase. First check whether BizTalk as product can handle all your requirements before considering ESB toolkit
on top it. If BizTalk can offer all the features you look for, then evaluate the feature with ESB toolkit and see how best it can fit in your solution.
3) Link to any proven clearinghouse architecture using BizTalk that is running in production. -
You got to ask this question to Microsoft. As them for any proven use case. BizTalk product team is very responsive team, I’m sure they can guide you better. Create a support call or contact Microsoft Sales. If I
remember “BizTalk 2013 EDI for Health Care” book has some reference around ClearingHouse. Have a check
4) Is Microsoft Azure BizTalk Services (MABS) is ready to take up all the cloud challenges that Clearinghouse would throw to it ?
- Again it depends on your requirement. When you consider MABS for clearinghouse you also need to consider about security implication involved in it. So I’ll give a better thought about this. Use MABS where it actually
required. May be in hybrid scenario but after ensuring the security implications around it.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

BizTalk 2013 R2 Always-On support

Hi,
BizTalk 2013 does not support SQL Server AlwaysOn feature because SQL Server AWO does not support MSDTC.
What about BizTalk 2013 R2 (which supports SQL 2014)?
Thanks.

There is actually a couple of blogs from last week stating that R2 has now gone into RTM, but there is nothing on the Team's Blog, and just checked MSDN Downloads, no bits there either.
MS: Has BizTalk Server 2013 R2 gone into RTM? And if so why is there nothing on the team's blog about this.
@David: Yes I know but when you don't have any customers who wants to be early adapters, you can't (or at least I can't) get your fingers on the early bits!
Morten la Cour

Multi-Lang support and slides issue

First, is anyone here using slides-based Flash documents at
all? Whenever I post my (IMHO well-researched) questions/reports,
like the one linked to below, I never get an answer. By now I'm
ready to give up completely on slide-based documents and ready to
convert it all to "flat" Flash docs, but I'm just curious why the
numerous horrible bugs in slides get no response, did everyone else
but me know not to use them???
(older problem, actually more a report because there is no
solution, it's clearly a bug IMHO:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=288&threadid =1255720&enterthread=y)
Anyway, I found a new issue, which, like last time, I first
successfully and easily recreated using a fresh (slide-based)
document to make sure my AS code isn't interferring.
Doing the same experiment with bot a "normal" Flash document
and with a slide-based one, I created a dynamic text field and
followed (Macromedia/Adobe) instructions to setup multi-language
support (en,de) for the text field, using the Strings dialogue.
It all worked as it should in the regular Flash doc, but
nothing worked in the slide-based one. Right now I'm trying to see
if I can still get it to work using the Locale class and AS code,
but that doesn't seem to work either.
Again, by now I've pretty much decided to abandon slide-based
layout because of the bugs and the non-existing feedback, I'm only
curious if I was the only one who ever even tried slides...(?)

this should work. One thing to keep in mind is that Swing components have fonts set on them, so if the font you are using doesn't contain the characters, then you get garbage sometimes (I see this with japanese characters when they pump into an app I'm currently writing, even though I know I got the right character codes out of the email).
Try base64 encoding the content before it is sent and save it (the base64) to a text file (Don't send the base64 text, send the actual content). Then base64 encode the content when it is recieved and compare it to the stored file (without the whole displaying thing). If they match, your issue isn't javamail, it is probably swing, or you aren't setting the character encodings correctly. If they don't match, javamail.
Just taking bets I would say the two will match and your issue is simply the swing font thing.

ESB WSDL generation and compatibility issues

Hi all.
I have a need to integrate Oracle ESB with TIBCO, and I'm facing some issues regarding the use of namespaces in WSDL.
In ESB, when I create a routing service, its corresponding WSDL has a targetNamespace attribute, for example, http://www.oracle.com/myRS
When I deploy this routing service using the "Invokable from external services" property checked, ESB automatically generates another WSDL, which contains the SOAP and ESB bindings and imports the previous WSDL. This WSDL's targetNamespace has the same value of the targetNamespace from the previous WSDL (http://www.oracle.com/myRS)
When TIBCO needs to consume the ESB web service ( the automatically generated one), it's complaining that the two WSDLs have the same targetNamespace, and they shouldn't (according to them).
Here's is an example:
1 - I create a routing service. It's WSDL looks like this:
<definitions name="TIBCOIntegrationRS" targetNamespace="http://oracle.com/esb/namespaces/TIBCOIntegration" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://oracle.com/esb/namespaces/TIBCOIntegration" xmlns:inp1="http://xmlns.oracle.com/pcbpel/adapter/db/top/CvrdRaCustomersIFace">
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/CvrdRaCustomersIFace" schemaLocation="CvrdRaCustomersIFace_table.xsd"/>
</schema>
</types>
<message name="CvrdRaCustomersIface_request">
<part name="CvrdRaCustomersIface" element="inp1:CvrdRaCustomersIface"/>
</message>
<portType name="execute_ppt">
<operation name="execute">
<input message="tns:CvrdRaCustomersIface_request"/>
</operation>
</portType>
</definitions>
2 - I deploy the routing service, and get another WSDL that is automatically generated:
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:import="http://oracle.com/esb/namespaces/TIBCOIntegration" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:esb="http://www.oracle.com/esb/" xmlns:ws="http://www.example.com/webservice" xmlns:tns="http://oracle.com/esb/namespaces/TIBCOIntegration" targetNamespace="http://oracle.com/esb/namespaces/TIBCOIntegration">
<import namespace="http://oracle.com/esb/namespaces/TIBCOIntegration" location="http://denis:80/esb/slide/ESB_Projects/DadosCliente_TIBCOIntegrationESB/TIBCOIntegration_TIBCOIntegrationRS.wsdl"/>
<portType name="execute_ppt">
<operation name="execute">
<input message="tns:CvrdRaCustomersIface_request"/>
</operation>
</portType>
<binding name="__esb_TIBCOIntegrationRS_execute_ppt" type="tns:execute_ppt">
<esb:binding/>
<operation name="execute">
<esb:operation event-name="TIBCOIntegration.TIBCOIntegrationRS.execute"/>
<input/>
</operation>
</binding>
<binding name="__soap_TIBCOIntegrationRS_execute_ppt" type="tns:execute_ppt">
<soap:binding xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="execute">
<soap:operation xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" soapAction="execute"/>
<input>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
</input>
</operation>
</binding>
<service name="ESB_TIBCOIntegrationRS_Service">
<port name="__soap_TIBCOIntegrationRS_execute_ppt" binding="tns:__soap_TIBCOIntegrationRS_execute_ppt">
<soap:address xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" location="http://denis:80/event/TIBCOIntegration/TIBCOIntegrationRS"/>
</port>
<port name="__esb_TIBCOIntegrationRS_execute_ppt" binding="tns:__esb_TIBCOIntegrationRS_execute_ppt">
</port>
</service>
<plt:partnerLinkType name="execute_pptLT">
<plt:role name="execute_pptProvider">
<plt:portType name="tns:execute_ppt"/>
</plt:role>
</plt:partnerLinkType>
</definitions>
3 - We can see that both WSDLs have the same targetNamespace, and that's what TIBCO is complaining about.
I've been reading the W3C WSDL spec (2.0), and found a note regarding the use of the import clause in WSDL:
http://www.w3.org/TR/2007/REC-wsdl20-20070626/#import_namespace_attribute
It has the following fragment:
"The namespace attribute information item is of type xs:anyURI. Its actual value indicates that the containing WSDL 2.0 document MAY contain qualified references to WSDL 2.0 components in that namespace (via one or more prefixes declared with namespace declarations in the normal way). This value MUST NOT match the actual value of targetNamespace attribute information item in the enclosing WSDL 2.0 document"
I don't know if ESB is currently working with WSDL 2.0 specification. I's mentioned here just for a comparison.
So, the question is: Is it allowed and W3C compatible to use the same targetNamespace in the enclosing WSDL as well as in the imported one?
thanks
Denis
Message was edited by:
[email protected]
Message was edited by:
[email protected]

Hi ,
This is Shobana K from PeopleTools.
I am also facing a similar issue.
The ESB services exposed for external invocation are nested wsdls meaning one WSDL imports another.
Consider this nested WSDL for example-
http://10.176.162.55:8888/esb/wsil/NestedESB_synchronous/NestedSynch_RS?wsdl
Above wsdl corresponds to the base wsdl containing the binding and service information. This in turn imports another WSDL http://10.176.162.55:8888/esb/slide/ESB_Projects/8.50_ESB_Nested_wsdl_NestedESB_synchronous/NestedESB_synchronous_NestedSynch_RS.wsdl
which contains port type, message and schema information. These wsdls are formed in accordance to the "import authoring style" defined in 2.1.2 section of the WSDL1.1 specification.
The authoring style used in ESB wsdl is exactly the same as the one shown in the WSDL spec but for one point.
In case of ESB, both the wsdls(base as well as the imported one) have the same target namespace. Is it possible for 2 wsdls to have the same target namespace within the same scope?
In order to parse the WSDL for the required information, we need to look at the information both in the base wsdl as well as the imported wsdl. While trying to locate the correct information in the right wsdl, we make use of the namespace value used with the element name. For e.g, the base wsdl may only be containing the binding information. This in turn will refer to the port type information available in the imported wsdl. Now, while parsing, we make use of the namespace value associated with the port type element name in the base wsdl.Based on the namespace value, we decide which wsdl contains this information.
In the sample nested ESB wsdl that I have quoted above http://10.176.162.55:8888/esb/slide/ESB_Projects/8.50_ESB_Nested_wsdl_NestedESB_synchronous/NestedESB_synchronous_NestedSynch_RS.wsdl, the tns(this namespace) value associated with the port type element corresponds to the target namespace value in both the wsdls and the value happens to be the same. Hence while parsing, when we look for the port type and message information belonging to the "tns" namespace, we tend to search for those information only in the base wsdl and not the imported one.This sounds logical and it would have worked had the target namespace been different for the 2 wsdls. It fails in this case because both the WSDLs have the same target namespace. In such cases, how should we go about parsing the wsdl?
Your inputs and feedback will be greatly appreciated.
Thanks a lot in advance.
Regards,
Shobana K

BulkLoader and licencing issues

Folks,
I'm trying to use BulkLoader in a wl6/wlps3.5 environment.
I'm sending this command line to the bulkLoader.
java com.beasys.commerce.axiom.document.loader.BulkLoader
+verbose
-recursive
+delete
-metaparse
-htmlPat *.html
-properties C:\bea\interwovenTransformation
\BulkLoadWrapper.properties
-conPool loadDocPool
-encoding UTF8
-d C:\bea\WebLogicCommerce3.5\dmsBase
But, I'm getting this following error.
=============== Initializing Logger ======================
<E>: java.sql.SQLException: java.sql.SQLException:
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Missing license file for: WebLogic Server 6.0
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Which cannot be true, because I've got a live weblogic running
in the background. With the right licenses for sqlserver and
everything.
How do I get it to look at my licence file?
Further, I have a suspision that BulkLoader may only work in a
weblogic5.1 environment, as I've had some 5.1 kinds of error
messages served back to me. Particularly in respect to
configuration property files.
Has anyone run BulkLoader in a wlps3.5 environment?
thanksinadvance,
dk-

Hi Denis,
I think that you're going to have trouble with these scripts,
and quite honestly the local BEA guys should never have given
them to you. Have them contact me if they're interested in
why they were not supposed to do this.
Thanks,
Skip
"denis krizanovic" <[email protected]> wrote in message
news:[email protected]...
>
Skip,
Good spot! I am using SQLServer2K with wlps3.5. I managed to
get the scripts from the local BEA guys here.. {we needed them
because of a BroadBase BEA Adapter)
What I'm trying to do is basically use BulkLoader
programatically from a servlet to load a series of html files
into the metadata tables.
These html files come from a XSL transformation of Interwoven
DCRs.
I want to use bulkloader because of it's sycnhronisation
capabilties.
I don't know what else you need to know?
dk-
In article <[email protected]>, [email protected]
says...
Hi Denis,> >> > It looks like you're trying to use WLCS 3.5 with SQL Server.> > This has not yet been certified and the scripts have not been> > made available for download. Can you tell us more about what> > you are trying to do?> >> > Thanks,> >> > Skip> >> > "denis krizanovic" <[email protected]> wrote in message> > news:[email protected]...> > >> > > Folks,> > >> > > I'm trying to use BulkLoader in a wl6/wlps3.5 environment.> > >> > > I'm sending this command line to the bulkLoader.> > >> > > java com.beasys.commerce.axiom.document.loader.BulkLoader> > > +verbose> > > -recursive> > > +delete> > > -metaparse> > > -htmlPat *.html> > > -properties C:\bea\interwovenTransformation> > > \BulkLoadWrapper.properties> > > -conPool loadDocPool> > > -encoding UTF8> > > -d C:\bea\WebLogicCommerce3.5\dmsBase> > >> > > But, I'm getting this following error.> > >> > > =============== Initializing Logger ======================> > > <E>: java.sql.SQLException: java.sql.SQLException:> > > $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$> > > Missing license file for: WebLogic Server 6.0> > > $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$> > >> > > Which cannot be true, because I've got a live weblogic running> > > in the background. With the right licenses for sqlserver and> > > everything.> > >> > > How do I get it to look at my licence file?> > >> > > Further, I have a suspision that BulkLoader may only work in a> > > weblogic5.1 environment, as I've had some 5.1 kinds of error> > > messages served back to me. Particularly in respect to> > > configuration property files.

JCOM and BEA support and license issues

After going round and round with first tier support, I'd like to post this message
to the newsgroup to clarify how jCOM finds the license.bea file.
Here is an e-mail I sent to support...
The beahomelist file gets created in a bea directory in the user's home directory
($HOME/bea/beahomelist).
The problem is that the WebLogic server and the Jcom classes are looking for the
license in two different ways.
WLS uses the $BEA_HOME variable and jCOM uses the user.home System property (this
may or may not be $HOME).
Your were incorrect when you stated that the WebLogic server needs to runnning by
the user that installed the software. Any user can start the server and use the
jCom classes as long as jCom can find the license, this requires that the user wanting
to use jCOM have a bea directory and beahomelist file in the directory that the user.home
system property resolves to.
It would be much easier for jCOM users to have the server and jcom find the license
in the same manner.
You've been so helpful.

"Michael Jones" <[email protected]> wrote:
>
After going round and round with first tier support, I'd like to post this
message
to the newsgroup to clarify how jCOM finds the license.bea file.
Here is an e-mail I sent to support...
The beahomelist file gets created in a bea directory in the user's home
directory
($HOME/bea/beahomelist).
The problem is that the WebLogic server and the Jcom classes are looking
for the
license in two different ways.
WLS uses the $BEA_HOME variable and jCOM uses the user.home System property
(this
may or may not be $HOME).
Your were incorrect when you stated that the WebLogic server needs to runnning
by
the user that installed the software. Any user can start the server and
use the
jCom classes as long as jCom can find the license, this requires that the
user wanting
to use jCOM have a bea directory and beahomelist file in the directory that
the user.home
system property resolves to.
It would be much easier for jCOM users to have the server and jcom find
the license
in the same manner.
You've been so helpful.
Hi Michael,
thanks a lot!! this was the right hint!!
Michael

BizTalk Server Developer 2013 Vs BizTalk 2013 R2

I would like to know that if user production environment is BizTalk 2013R2.
Can I use "BizTalk Server Developer 2013" for my development? Does they compatiable?

Yes it’s possible.
BizTalk 2013 R2 support both .NET Framework 4.5 and .NET Framework 4.5.1 not just 4.5.1.
Artifacts from BizTalk 2013 are .NET 4.5 and they are compatible with BizTalk 2013 R2 environment and hence they can be deployed in BizTalk 2013 R2 – Technically it’s possible.
Refer the platform supported section in this MSDN article.
https://msdn.microsoft.com/en-us/library/jj248703.aspx
Then the question comes, would I do this? I will not. But if you don’t have an option, you got to use BizTalk 2013 in BizTalk 2013 R2, then I can. And for future development I would use BizTalk 2013 R2 environments for BizTalk 2013 R2 deployment.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

BizTalk 2013 R2 - WC-Custom Adapter SAP-Binding: Unhandeld exception on failure tests

Dear Mr./Ms.
We have set up a test environment with BizTalk 2013 R2 Developer edition.
And we have also set up the SAP adapter following this blog
https://sandroaspbiztalkblog.wordpress.com/2015/03/04/biztalk-server-20132013-r2-step-by-step-wcf-sap-adapter-installation-guide/#comments
.But instead we used a WCF-Custom adapter with SAP-Binding
Everthing works fine if BizTalk can connect to SAP. But if we do some failure test, like giving in a wrong password. We get next error in the event viewer:
Application: BTSNTSvc64.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.CallbackException
Stack:
at Microsoft.Adapters.Internal.LayeredChannelBindingElement.LayeredAsyncResult.SignalFinished(System.Object, System.Exception)
at Microsoft.Adapters.Internal.LayeredChannelBindingElement.LayeredOutboundChannel`1[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]].AsyncRequest(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
We would expect that we get some kind of authentication error and a suspended message. But Instead the host instance crash and message stays in process. Thanks in advance.
Kind regards
Benny Verhamme
benny verhamme signed

We would expect that we get some kind of authentication error and a suspended message. But Instead the host instance crash and message stays in process. Thanks in advance.
Hi Benny,
Thanks for your feedback in BizTalk forum.
As you mentioned above, we will receive an unhandled exception when we did something wrong during the procedure. I'm afraid that this is "by design", if this request is urgent for you, you could consider contact support directly(http://support.microsoft.com
). Thanks for your understanding.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What are the supported secure protocols between BizTalk 2013 R2 and Iguana HL7 interface

We are working on project where we want to transmit HL7 messages securely from BizTalk 2013 R2 to Iguana HL7 interface and receive Acks/Nacks. We came to know that MLLP adapter doesn't support SSL and the other option we are thinking
is HTTPS. Are there any better options available other than these 2 options which are supported by both BizTalk and iguana.
Also I read the following article
http://help.interfaceware.com/kb/164

Have you gone through above post .It clearly state
ACK’s are published when the Messaging Engine successfully transmits a message over the ‘wire’ and the system context property “AckRequired” is written on the message that was sent and it is set to true.
Both ACK’s and NACK’s have the following system context properties promoted which can therefore be used in filter expressions for routing:
AckType:
set to ACK or NACK
AckID:
set to the message ID of the message that this ACK/NACK is for
AckOwnerID:
set to the instance ID that this ACK/NACK is for
CorrelationToken:
flowed from the message to the ACK/NACK
I would again suggest to go through below link to design your solution
http://blogs.msdn.com/b/kevinsmi/archive/2004/07/03/172574.aspx
Thanks
Abhishek

Error using ESB toolkit 2.1 BizTalk 2010 Itinerary Selector pipeline component (Exception has been thrown by the target of an invocation. )

Hi all,
I am using using ESB Toollkit 2.1 (NOT 2.2). and the installation and configuration happened without any error. However I am getting the below error when I use ItinerarySelectReceivePassthrough pipeline.
======================================
There was a failure executing the receive pipeline: "Microsoft.Practices.ESB.Itinerary.Pipelines.ItinerarySelectReceivePassthrough, Microsoft.Practices.ESB.Itinerary.Pipelines, Version=2.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
Source: "ESB Itinerary Selector" Receive Port: "OneWay.OnRamp" URI: "C:\GOD\PROJECTS\Hoople.AdultWellbeingSolution\Testing\BusStop.2\*.txt" Reason: Exception has been thrown by the target of an invocation.
Exception has been thrown by the target of an invocation.
Source: Microsoft.Practices.ESB.Resolver.ResolverMgr
Method: System.Collections.Generic.Dictionary`2[System.String,System.String] Resolve(Microsoft.Practices.ESB.Resolver.ResolverInfo, Microsoft.BizTalk.Message.Interop.IBaseMessage, Microsoft.BizTalk.Component.Interop.IPipelineContext)
Error Source: mscorlib
Error TargetSite: System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
Error StackTrace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, StackCrawlMark& stackMark)
at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, Object[] args)
at Microsoft.Practices.ESB.Resolver.ResolverFactory.Create(String key)
at Microsoft.Practices.ESB.Resolver.ResolverMgr.GetResolver(ResolverInfo info)
at Microsoft.Practices.ESB.Resolver.ResolverMgr.Resolve(ResolverInfo info, IBaseMessage message, IPipelineContext pipelineContext
=====================================
I looked into a thread that talked about regacing assemblies, which was marked as answered however it does not say which dlls needs to be regaced.
Please help
THANKS IN ADVANCE
Surya

Hi Surya,
You are getting an exception in Microsoft.Practices.ESB.Resolver.dll. which has some issues in 2.1 version for calling dynamic resolver .
You can try enabling diagnostics to see some of the trace log
Note :To enable the BizTalk ESB Toolkit trace switch, add the following <switches> element to the
system.diagnostics section of the Machine.config file.
<system.diagnostics>
<switches>
<add name="BizTalkESBToolkit" value="4"/>
</switches>
</system.diagnostics>
@Tomasso has written a great post on this and changed some of the config setting in ESB.config.
http://www.ithero.nl/post/2013/05/12/How-to-fix-the-error-Exception-has-been-thrown-by-the-target-of-an-invocation-when-using-the-BRI-resolver-in-the-ESB-Toolkit-and-BizTalk-2013.aspx
There is also MSDN article here
https://support.microsoft.com/kb/2887594?wa=wsignin1.0
which again suggest you to modify the ESB.config file
Note: Please take a backup of existing ESB.config before modifying
Here are the settings
Manually modify the existing esb.config file as follows:1.Remove the <typeConfig> element
2.Change the <typeAlias> element to <alias>
3.Change the <type> element to <register>
4.Remove the <containers> elements
5.Remove the <types> elements
6.Remove the <typeAliases> elements
7.Remove the parameterType attribute of the <param> elements.
8.Remove the type attribute of the <value> element within <param name="overrideExistingItinerary">
Its also been well described in below BizTalk Post
https://social.msdn.microsoft.com/Forums/en-US/b92fbd9a-7c6d-4cec-b745-bf092e5e644f/esb-toolkit-22-error-in-using-the-dynamic-itinerary-resolver-bri?forum=biztalkesb
Thanks
Abhishek
As mentioned in my previous post, the fix is provided for ESB Toolkit 2.2 and not for
ESB Toolkit 2.1.
ESB Toolkit 2.2 uses Microsoft Enterprise Library 5.0 and Unity 2.0 whereas
ESB Tookit 2.1 uses Microsoft Enterprise Library 4.1 and Unity 1.2.
REFRAIN FROM DOING ANY CONFIG CHANGES WITHOUT CONSULTING MICROSOFT.
Rachit
Please mark as answer or vote as helpful if my reply does

Biztalk 2013 R2 SQL Support

1 Various Microsoft articles state that Biztalk 2013 R2 SQL databases are supported by Microsoft on a Windows failover cluster.
Does this mean that SQL 2012 and/or 2014 AlwaysOn Failover Clustering is fully supported for BizTalk 2013R2 including MSDTC.
2. Can we install SQL 2012 and SQL 2014 on the same AlwaysOn failover cluster?
Regards
Suresh

Hi Suresh,
SQL Server AlwaysOn is not supported in BizTalk 2013 R2 as well. This is mentioned in MSDN page
What's New in BizTalk Server 2013 and 2013 R2
"When BizTalk Server and SQL Server are installed on separate computers, Distributed Transaction Coordinator (MS DTC) handles the transactions between the computers. As a result, the SQL Server AlwaysOn feature is not supported. The SQL Server AlwaysOn
feature does not support MSDTC transactions."
Discussed in length on similar post
here.
Rachit
Please mark as answer or vote as helpful if my reply does

BizTalk 2010 and BizTalk 2013 R2 on a single TFS 2010 build machine

Hello,
We are running two BizTalk environments ( BizTalk 2010 and BizTalk 2013 R2). All our BizTalk 2010 applications are using a single build machone on TFS 2010. We are planning to use the same build server for BizTalk 2013
R2 as well. As a prerequisite, we need to install the below two components,
1. .NET Framework 4.5
2. Microsoft BizTalk Server 2013 - Project Build Component (under Additional Software)
Will the single build server support BizTalk 2010 project build component and BizTalk 2013 R2 project build component. We don't want to have any conflict on the build server. Thanks in advance.

Thanks for the answer. As its a dedicated build server, we are planning to install only the Project Build Components ( one is for BizTalk 2010 and another one is for BizTalk 2013 R2). We are not planning to install any of the other BizTalk server
components on the build server. Is that true that we can't even install multiple versions of project build components? Thanks in advance.

BizTalk 2013/R2 and IBM WebSphere MQ 8.0

Does Microsoft BizTalk 2013/R2 support IBM Websphere MQ 8.0 (where Websphere is running on Win 2008/R2)? Official word from Microsoft or is anybody currently using it?
Thanks,
Neal Walters

HI Neal,
According to current information, supported IBM WebSphere MQ versions in Microsoft BizTalk Server 2013 and 2013 R2 :
IBM WebSphere MQ 6.0.2.12 and later
IBM WebSphere MQ 7.0.1.9 and later
IBM WebSphere MQ 7.1.0.5 and later
IBM WebSphere MQ 7.5.0.3 and later
Further information:
Install MQSeries Prerequisites
If you cannot determine your answer here or on your own, consider opening a support case with us. Visit this link to see the various support options that are available to better meet your needs:
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone .
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

UNIONS and Discriminant Value mapping using BizTalk 2013

We're converting our old BizTalk 2006 TIObjects to BizTalk2013 and have used the TIConversionTool. We are finding that the majority of TIObjects are converting successfully. But we have 2 cases where we have used UNIONS and Discriminant Values to allow
different but similar requests to call one mainframe program. When running the TIConversionTool, it looks like the UNIONS and Discriminant Value mappings are being dropped. Does anyone know how UNIONS are handled in BizTalk2013? Shouldn't the TIConversionTool
keep the UNIONS and DV Mappings? Is there a way to go in and add the Union and the DV mappings manually? Thanks!

Hello,
Have you used HIS 2010 or HIS 2013 together with BizTalk 2013 in order to convert the TI Assemblies from HIS 2006 ?
Best Regards,
Steve Melan - BCEE My Blog : http://stevemelan.wordpress.com

Biztalk 2013 R2 ESB toolkit support and Licence issues

Similar Messages

Maybe you are looking for