BizTalk BAM Data is not showing
In BizTalk 2010, BAM Data is showing correctly.
But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
Event Log shows not any error.
What I have to check for getting BAM data in 2013 ?
Which configurations should I check ?
Any kind of help would be appreciated.
Prakash
Prakash,
There are two parts to it:
Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
If event log is clean, no data in
TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step which is deploying the tracking
profiles may not have happened properly.
Check the following article for help:
Deploying and Undeploying Tracking Profiles
How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Similar Messages
-
Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier! -
After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.
Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved. -
Time of email shows in Date Column, Date is not showing on new emails
Date is not showing in Date column. Only time is showing.
I just migrated from OE - Old emails show the time & Date.If these are emails received today that is normal. Thunderbird assumes you know what day it is and only displays the time for messages received today. It will append the date to these messages at midnight tonight.
-
Due date is not showing up in UWL
Hi ,
Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
I really appreciate your help.
Regards
MarkHi,
As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
Regards,
Karri -
Data is not showing up in report on ODS
Hi All,
we have requirment like below
we have an ODS no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in ODS active data table .
So data is there only in active data table that table was filling by using function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
SirishaIn this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond -
Biztalk Bam data not showing up.
HI Experts,
I have a strange problem here.
Recently i deployed updated bam .btt file in my QA server.Oldone was deployed 2.5 years ago.After 2.5 years this is the change we deployed.
For that i followed the below procedure
Undeployed BAM activity and Undeployed .btt file(existing ones)
Now i deployed BAM activity and .btt files.
So when i drop a file, I can't able to see any data in the BAMPRIMARYIMPORT db tables.
Later i reverted back to existing(old one).
Again i tested, i didn't see any data....
Is there any thing to do with the CU?I can't even see any error logs in event viewer.
Also the new .btt is working fine in dev environment...
Please can any give me an idea on this, I got stuck up on this..
By the way my environment is QA....
Thanks in Advance.Hi Venkat,
When you don’t see any
TDDS_FailedTrackingData table, then there is no tracking failure. FYI, when data is being written into
TDDS_FailedTrackingData
you would see entries in eventlog for errors.
Then there only couple of things which could this data problem:
Tracking Data Decode Service: Ensure your host instance is configured to run "Tracking Data Decode Service (TDDS)" in your environment. When
an asynchronous event stream is used, the BAM data will be first written to the BizTalk message box database and it’s the job of the TDDS service to move
the BAM data from BizTalk message box database to BAMPrimaryImport database.
http://msdn.microsoft.com/en-us/library/ee308950(v=bts.10).aspx
Other obvious reason is TPE is not deployed properly. When TPE is deployed but corresponding BAM activities are not deployed, then you would get warning/error in event log. But when BAM
activities are deployed, but the TPE (the process which initializes the tacking to the activities) are not deployed, then you would not get any entries in eventlog.
And also when you say “Later i reverted back to existing(old one).”.
I don’t think you have restored the backed-up BAMPrimaryImport db. You might have redeployed the *.btt files, which again could cause the deployed issues.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Oracle apps Data does not show in Discoverer
When running my query in sql developer, I have to execute the command apps.fnd_global.apps_initialize(user_id, resp_id, resp_appl_id) in order to show the result of my query. Without this, the query returns nothing. The problem is I am using this query as a custom query for my Discoverer report and my report does not show any record. Anyone knows how to handle this?
Hi,
There can be many reasons why a Discoverer report does not return data, but I don't think it will be because the session is not apps initialized. Check that the language has been set correctly, using the calculation userenv('lang').
As I don't know anything about your environment, it is a bit hard to guess what else might be causing this issue. Is there anything different about this report? What is the custom query that you are running?
Rod West -
2lis_03_bf data is not showing data in RSA3
Hi,
I have loaded 2lis_03_bx first for a plant using MCNB transaction,its showing data in RSA3 then I have loaded 2lis_03_bf datasource for the same plant using transaction 0LI2BW. but it is not showing data in RSA3.
I have done the above process in background.
In SM37 it is showing the following message for the 2lis_03_bf datasource
<b>Job started
Step 001 started (program RMCBNEUB, variant &0000000000003, user ID TCS_SRM)
Date fields for info structure S032 are not generated
Job finished</b>
steps:
1.Before loading the data I have deleted data using LBWG
2.In LBWE, 2lis_03_bf is already activated.
Please help me out on resolving the above issue
Thanks in AdvanceODS Settings
BEx reporting option --> If this indicator is not set, no SID's are generated for the new characteristics when the data in the ODS object is activated.This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries.
Refer this link for more information...
http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/frameset.htm -
My ICal data does not show up on Subscribers Calendar
Following all of the instructions how to get my ICal information to another Apple Computer (Macbook Pro) however when we access the Macbook Pro the data from my Calendar does not show up. Calendar is there, just the data does not make it across.
Any thoughts.
Thanks MarkThanks for the information.
If you view the same calendar on the MobileMe website, do you see the events?
http://ical.me.com/yourmembernamehere/calendarname
If you don't see the events on the calendar web page then the publish did not go through succesffully. Un-publish the calendar, make a slight change to its title, and then re-publish and test.
If you do see the events on the website but still not in iCal on the 10.6.8 system:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Remove the subscription for iCal to that specific calendar.
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
4. Launch iCal and re-add the subscription.
Hope that helps! -
Data is not showing in R/3 ztable whlie creating XI inbound proxy.
Hi experts,
I am creating an XI inbound proxy for zxx_stockyard_price_ib_dt ,
I created Ztable(this structure contains both filename and data structure) in R/3 and i am writing a code in sproxy to fetch the data from XI to R/3, R/3 is to fill and store the data in a ztabe .
XI data file is ok, however , when executed ,the input file of XI is not reflecting in the R/3 Ztable,
I need a help in this scenario,
here is the peice of code,
METHOD zxx_ii_stockyard_price_ib_mi~stockyard_price_ib_mi.
DATA : it_zxx_stockyard_price_ib_dt TYPE table of zxx_stockyard_price_ib_dt , " input batches from file
wa_zxx_stockyard_price_ib_dt TYPE zxx_stockyard_price_ib_dt ,
i_zrva_trv_interfa TYPE TABLE OF zrva_trv_interfa ,
wa_zrva_trv_interfa TYPE zrva_trv_interfa.
******fill input internal table from XI
wa_zxx_stockyard_price_ib_dt = input-stockyard_price_ib_mt.
*fetch the records from XI.
LOOP AT it_zxx_stockyard_price_ib_dt INTO wa_zxx_stockyard_price_ib_dt. " looping input data of XI nd moving the data to R3.
MOVE-CORRESPONDING wa_zxx_stockyard_price_ib_dt TO wa_zrva_trv_interfa.
APPEND wa_zrva_trv_interfa TO i_zrva_trv_interfa.
Modify zrva_trv_interfa FROM WA_zrva_trv_interfa.
ENDLOOP .
IF NOT i_zrva_trv_interfa IS INITIAL.
LOOP AT i_zrva_trv_interfa INTO wa_zrva_trv_interfa.
MODIFY zrva_trv_interfa FROM wa_zrva_trv_interfa.
CLEAR wa_zrva_trv_interfa.
ENDLOOP.
ENDIF.
FREE i_zrva_trv_interfa.
ENDMETHOD.
when execute and debugged i found the values are not showing in internal table i_zrva_trv_interfa (loop at i_zrva_trv_interfa), where i am going wrong?> here is the peice of code,
>
> METHOD zxx_ii_stockyard_price_ib_mi~stockyard_price_ib_mi.
> DATA : it_zxx_stockyard_price_ib_dt TYPE table of zxx_stockyard_price_ib_dt , " input batches from file
> wa_zxx_stockyard_price_ib_dt TYPE zxx_stockyard_price_ib_dt ,
> i_zrva_trv_interfa TYPE TABLE OF zrva_trv_interfa ,
> wa_zrva_trv_interfa TYPE zrva_trv_interfa.
>
> ******fill input internal table from XI
> wa_zxx_stockyard_price_ib_dt = input-stockyard_price_ib_mt.
>
I think here at this place you have problem. As per your code you have moved the input-stockyard_price_ib_mt to wa_zxx_stockyard_price_ib_dt BUT you have not appended to the internal table it_zxx_stockyard_price_ib_dt.
If I am wrong then make sure it_zxx_stockyard_price_ib_dt is filled correctly before you loop on it.
also add the below check befor looping.
IF NOT it_zxx_stockyard_price_ib_dt is INITIAL.
> *fetch the records from XI.
> LOOP AT it_zxx_stockyard_price_ib_dt INTO wa_zxx_stockyard_price_ib_dt. " looping input data of XI nd moving the data to R3.
> MOVE-CORRESPONDING wa_zxx_stockyard_price_ib_dt TO wa_zrva_trv_interfa.
> APPEND wa_zrva_trv_interfa TO i_zrva_trv_interfa.
> * Modify zrva_trv_interfa FROM WA_zrva_trv_interfa.
> ENDLOOP .
ENDIF. "IF NOT it_zxx_stockyard_price_ib_dt is INITIAL.
>
> IF NOT i_zrva_trv_interfa IS INITIAL.
> LOOP AT i_zrva_trv_interfa INTO wa_zrva_trv_interfa.
> MODIFY zrva_trv_interfa FROM wa_zrva_trv_interfa.
> CLEAR wa_zrva_trv_interfa.
> ENDLOOP.
>
> ENDIF.
>
> FREE i_zrva_trv_interfa.
>
> ENDMETHOD.
>
>
> when execute and debugged i found the values are not showing in internal table i_zrva_trv_interfa (loop at i_zrva_trv_interfa), where i am going wrong?
Regards,
Sarvesh -
Hi experts,
I have two Fact Tables F1 and F2 and both having the join with Dimensions D1,D2.
when i pick the data from D1,D2 and measure from F2 and F1 then the report is runnug fine. but when i pick data from D1,D2 and some character from F2 and measure from F1 . then the column from F1 does not showing any data.
Please suggest.
SThis is expected behaviour from the BI Server. F1 doesn't know how to aggregate over the character column from F2.
There are two solutions.
1) Add an aggregation rule to the character column of F2.
If this is not what you want:
2) Create a logical dimension for the character column of F2. Create a hierarchy for this new dimension. Set the logical level of measure F1 to grand total level of new dimension. -
Created By and Created Date fields not showing up on Custom List form webpart
Hi,
I have added Custom Listform WebPart on "DispForm.aspx" of custom list. I need to display, out of box fields "Author" [Created By] and "Created" [Creation Date] on this custom list form webpart, I have added them on the webpart, following is the code behind of aspx page:
<td width ="400px" valign= "top" class="ms-formbody">
<xsl: value-of select = "@Author" disable-output-escaping = "yes"/>
</td>
However these fields are not showing/populating data on the form ?? Any inputs ???
RegardsHi,
I think that when you insert a custom list form web part you select “Item” content type, so custom list form is designed to display only the fields that are appropriate for that content type “Item”, but the item content type doesn’t contain the created and created by column, when you add the two columns, it will not find the field value. By default, the two columns will display at the foot of the list form using SharePoint:CreatedModifiedInfo.
Hope it can help you.
Xue-Mei Chang -
Search Page by date field not showing up results
Hi,
I am using Jdev 11g and new to adf.
My applciation needs a search page based on a date field.
I created a viewcriteria for the object which expects a date field from the user.( the bind variable is of type Date)
After this i dragged the viewcriteria as af:query (panel with table) on the jspx page.
Now when i run the application, that is when i enter the date (calendar autogenerated by query component),
it does not show up any results.
My date field in the database has a timestamp attached to it, somewhere i read that the timestamp may be causing the problem.
But i have not found any solution for this one.
This looks very basic to me, i am sure i am missing soemthing important.
Besides i even tried the approach of programmaticlly populating the Viewobject(by not using the any query component),
i can see the Viewobject being populated in the logs( the row count) but on the display page, no rows are shown.
I am sure i am doing something wrong for this one.
AppModuleImpl am = this.getAm();
ViewObject submittalVO = am.findViewObject("AcrSubmittallogView1");
System.out.println("after getting VO");
String subDate = this.getSubDate().getValue().toString();
String query = " to_char(SubmitDtTm,'mm/dd/yyyy') = '"+subDate+"'";
submittalVO.setWhereClause(query);
System.out.println("QUERY>>>> "+submittalVO.getQuery());
submittalVO.executeQuery();
System.out.println("after executing query "+submittalVO.getRowCount());
this.setRenderLogTable(true);But i actually want to use the built in query component instead of programmatically doing it.
Can someone please guide me further.
Any help will be grt.
Thanks in advance
ash
Edited by: user1175461 on Jul 15, 2010 1:18 PMStill not working for me either, here's exactly what I'm doing.
My query is as follows:
SELECT
RO.repair_line_id,
RO.repair_number,
SR.customer_po_number, segment1,
trunc(RO.creation_date) as creation_date,
I've created a Bind Variable for the creation_date as follows:
<Variable
Name="createDate"
Kind="viewcriteria"
Type="oracle.jbo.domain.Date"/>
Which is linked to a view criteria:
<ViewCriteria
Name="RepairSearchVVOCriteria"
ViewObjectName="com.services.cs.vvo.RepairSearchVVO"
Conjunction="AND">
<Properties>
<CustomProperties>
<Property
Name="displayOperators"
Value="InAdvancedMode"/>
<Property
Name="autoExecute"
Value="false"/>
<Property
Name="allowConjunctionOverride"
Value="true"/>
<Property
Name="showInList"
Value="true"/>
<Property
Name="mode"
Value="Basic"/>
</CustomProperties>
</Properties>
<ViewCriteriaRow
Name="vcrow1"
UpperColumns="1">
<ViewCriteriaItem
Name="CreationDate"
ViewAttribute="CreationDate"
Operator="="
Conjunction="AND"
Value=":createDate"
IsBindVarValue="true"
Required="Optional"/>
</ViewCriteriaRow>
</ViewCriteria>
I then dragged the criteria into the page. When running it I get the following:
AND SR.customer_id =:psCustomerId) QRSLT WHERE ( ( (CREATION_DATE = :createDate ) ) )
<ViewObjectImpl><bindParametersForCollection> [3510] Bind params for ViewObject: [com.xxx.services.cs.vvo.RepairSearchVVO]RepairSearchAM.RepairSearchVVO1
<OracleSQLBuilderImpl><bindParamValue> [3511] Binding param "psCustomerId": 34758
<OracleSQLBuilderImpl><bindParamValue> [3512] Binding param "createDate": 2010-02-18
Which never brings back any data. My date's look as follows in the database:
'18-FEB-10'
I never get any results for the date. I've also tried using the to_char to format the date as the same format, but that always gives a variety of errors. This is driving me batty =0 Any ideas on why it never pulls back data?
Thanks, Graeme. -
ODBC data sources not showing up in datasource selection list
when I go to change datasources for a report, newly created ODBC connections do not show up. I noticed they are all in the odbc.ini file and listed under ODBC in the machine directory/software folder in the registry but not under the current user/software/odbc registry folder. Where does Business Objects/Crystal reports cache this information?
OK, then how do I set up a connection pool for a SQL Server database? At some point, I have to configure a connection pool. In the Call Interface dropdown, isn't ODBC the proper choice? Then, in the Data Source name dropdown, I should get some entries, right?
Maybe you are looking for
-
Error When trying to load master data 0material
Hi, I got the following error when trying to laod 0MATERIAL master data "value '000000000004343434 ' for characteristic 0MATERIAL is in external format " "0MATERIAL : Data record 1 ('000000000004343434 '): Version '000000000004343434 ' is not val
-
I have been using my Nano on a Mac and want to start using it exclusively on a PC. Will my PC "see" the Nano so that I can perform a "restore" and convert it to Windows format? iMac G4 Widescreen Mac OS X (10.3)
-
802.1x / Radius: Can't reject a user!
Good afternoon, I have been struggling on this problem for a while. Basically my Radius server (Linux based Freeradius, not Cisco ACS) send a Reject packet but the switch (WS-3750-24PS) somehow OVERWRITE the result and authorized the port!! The follo
-
Whats the difference between System.exit(99) & System.exit(-1)
Whats the difference between System.exit(99) & System.exit(-1)
-
i have a game called dino island that i downloaded from the app store it wont work after i click on an island why can you help?