Biztalk Bam data not showing up.

HI Experts,
I have a strange problem here.
Recently i deployed updated bam .btt file in my QA server.Oldone was deployed 2.5 years ago.After 2.5 years this is the change we deployed.
For that i followed the below procedure
Undeployed BAM activity and Undeployed .btt file(existing ones)
Now i deployed BAM activity and .btt files.
So when i drop a file, I can't able to see any data in the BAMPRIMARYIMPORT db tables.
Later i reverted back to existing(old one).
Again i tested, i didn't see any data....
Is there any thing to do with the CU?I can't even see any error logs in event viewer.
Also the new .btt is working fine in dev environment...
Please can any give me an idea on this, I got stuck up on this..
By the way my environment is QA....
Thanks in Advance.

Hi Venkat,
When you don’t see any
TDDS_FailedTrackingData table, then there is no tracking failure. FYI, when data is being written into
TDDS_FailedTrackingData
you would see entries in eventlog for errors.
Then there only couple of things which could this data problem:
Tracking Data Decode Service: Ensure your host instance is configured to run "Tracking Data Decode Service (TDDS)" in your environment. When
an asynchronous event stream is used, the BAM data will be first written to the BizTalk message box database and it’s the job of the TDDS service to move
the BAM data from BizTalk message box database to BAMPrimaryImport database.
http://msdn.microsoft.com/en-us/library/ee308950(v=bts.10).aspx
Other obvious reason is TPE is not deployed properly. When TPE is deployed but corresponding BAM activities are not deployed, then you would get warning/error in event log. But when BAM
activities are deployed, but the TPE (the process which initializes the tacking to the activities) are not deployed, then you would not get any entries in eventlog.
And also when you say “Later i reverted back to existing(old one).”.
I don’t think you have restored the backed-up BAMPrimaryImport db. You might have redeployed the *.btt files, which again could cause the deployed issues.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Similar Messages

BizTalk BAM Data is not showing

In BizTalk 2010, BAM Data is showing correctly.
But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
Event Log shows not any error.
What I have to check for getting BAM data in 2013 ?
Which configurations should I check ?
Any kind of help would be appreciated.
Prakash

Prakash,
There are two parts to it:
Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
If event log is clean, no data in
TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step which is deploying the tracking
profiles may not have happened properly.
Check the following article for help:
Deploying and Undeploying Tracking Profiles
How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

SSRS pulls data from ESSBASE cube, data not showing

Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
Grace

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

XMP data not showing up in the custom file info panels when upgraded to CC

For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.

I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

LSMW - Read Data not showing in Converted Data

Hi,
I am using LSMW to load data from a flat file (via recording). I have it working except I have one issue. When I display the data in read data all fields are showing. No errors popup when I select convert data. When I select display converted data the last few fields are missing. Any ideas why or how to fix this?
Any help is appreciated as I do not know how to proceed.
Thanks,
Annette
Edited by: Annette Ameel on Dec 4, 2008 5:37 PM

HI Bush,
Currently I am also facing the same problem. In "display read data" it is showing all the field values. No error msg in "convert data". But only 2 fields are displaying in "display converted data". not showing any values in rest of the fields. Kindly suggest me how you fixed this problem

SAP Fiori Purchase Requirision data not show

Hi Team,
SAP Fiori Purchase Requirision all configuration i have done.
I am creating Purchase Requirision using t-code me51n. and then that purchase Requirision came in Work Flow properly.
but from Browser http//<IP Address>:<Port> /sap/bc/ui5_ui5/sap/ui5_mm_pr_apv/index.html?backToHome=true data not display.
i have configure proper TS/Task Type id to scenario. but Still data did not showed.
Below is Work Flow Screen
Browser data not showed.
Regards
Pankaj Kamble
Tags edited by: Michael Appleby

hi Guys
please guide me
@masayuki : - i used above link and created New launchpad but still data not showed .
i run link http://<IP>:<portNo>/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection/?$filter=key%20eq%20%27PR_APPROVAL%27
and getting below error message.
<feed xmlns="http://www.w3.org/2005/Atom" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata"xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xml:base="http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/">
<script id="tinyhippos-injected"/>
<id>
http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection/
</id>
<title type="text">ScenarioCollection</title>
<updated>2014-07-03T10:45:25Z</updated>
<author>
<name/>
</author>
<link href="ScenarioCollection/" rel="self" title="ScenarioCollection"/>
<entry>
<id>
http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')
</id>
<title type="text">
ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')
</title>
<updated>2014-07-03T10:45:25Z</updated>
<category term="taskprocessing.Scenario" scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme"/>
<link href="ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')" rel="self" title="Scenario"/>
<content type="application/xml">
<m:properties xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices">
<d:SAP__Origin>SCHANDECCDEV1</d:SAP__Origin>
<d:key>PR_APPROVAL</d:key>
<d:number>0</d:number>
<d:title>PR_APPROVAL</d:title>
<d:targetParams/>
</m:properties>
</content>
</entry>
</feed>
Regards
Pankaj Kamble

0IC_C03 Data Not Showing in Report

Dear Friends,
We are using SAP BW 3.5. I have a problem with 0IC_C03 Cube.
Problem is:
Data is transfered to BW i can see the data from Cube --> Contents.
But when i create a report i am unable to see only that particaluar data which dont
have storage location.
Can anybody help me why its not showing that specific data which dont
have storage location.
and on other hand we can see the data from Cube -->Contents
Regards,
malik

Yes i am taking care of marker.
all data is ok excep 13 records which have no storage location.
and only these 13 records are not showing in the report and thats why
my stock is not tele with R/3.
Any other hint.
regrds,
Malik

Please show this query, data not showing why?

I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
Becuase I didnt make any changes in this query.
Please help me
Urgent
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
and merch_order.orderno not in
(select export_order1.orderno from export_order1)
ORDER BY MERCH_ORDER.ORDERNO
there is no any error and msg header and footer print.

Maybe , the query in "NOT IN" clause select export_order1.orderno from export_order1
return the same rows as the following portion return....
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
OR
there are no rows which conform to the joining condition between the two tables BUYER and MERCH_ORDER ....
Regards,
Simon

Data not showing up on report

Hi
I have an Infocube that has data (ready for reporting) loaded from APO Livecache.
I'm running a BEX report that gets data from that cube, and for some reason the value for one Key figure is not showing up.
It's there in the infocube, but is not showing up on the report. The column for that key figure is just blank.
What can I check or do to see the value there?
Thanks!
Pooja

Hi
There are no restrictions or conditions on the KF and it is running on a single Infocube.
There are non-zero values in the cube.
The field level authorizations are also fine...
we used to be able to see the values when we last ran this report 2 weeks back.
There's a calculated key figure that is a sum of this key figure that's not showing up and another one. It is showing the aggregate value correctly! Eg:
KF not showing up: Production Planned
2nd KF : On Hand Stock
Calculated KF Ending Inventory = Production Planned + On Hand Stock
Although Production Planned is not showing up in the report, I checked its value in the cube and the Ending Inventory value is summed correctly in the report.

Date not showed when report is viewed in PDF .

Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.

I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now.

Why is my midi data not showing up on Logic Pro X?

So i've been working on this project for a while now and for some reason out of no where the midi data is not showing up. every time i click on a region, it doesn't open up the midi data for that track, but instead only opens up the data for a different track. No matter what region i try to open, it always goes to that one specific region, and if i try to click in notes it only puts them in on that region. furthermoer, the MIDI draw refuses to work. it will not let me pitch bend, change note velocities, or anything. Am i missing something obvious or what?? please help, this is one of my favorite projects so far and I don't want to trash it because i can't do anything with it.

Just happened to me. Then realized that I had clicked the "link" button off in the Piano Roll Editor and clicking it back on fixed it.

Proper Data Not showing in Preview Mode

Hello,
I'm using the Dashboard Design tool to create a dashboard with Input controls on 2 stack column charts.
There are 7 Input Targets pointing to 1st stack column chart, the SUM of all these targets need to be populated on one of the values in the second chart.
e.i. Two stack column charts=Revenue By Month and Revenue By week
Target Inputs are pointed to Revenue By week, so target's which are assigned to each week of a certain month need to Sum and populate in 'Revenue by Month' chart, on top of the corresponding month.
I have all the logic inputted, when i edit values in the excel sheet, changes are occurring, all values are being populated in both charts. However, when i Preview the dashboard and input targets i am only seeing targets populating in "revenue by Week" and 'Revenue By Month" is not populating any target data.
Any idea's on why this might be?
Thanks in advance for any feedback

Hi Zena,
It looks something is breaking within the formula or logic. Try the below steps to narrow down:
1. Preview the swf in Xcelsius.
2. Take the snapshot of data in Excel( File->Snapshot->current excel data).
3. Check the data if showing correct in the excel sheet.
This would also help you isolate which formula or function is breaking.
Thanks,
Amit

Google Calendar tasks (with due dates) not showing on cal

Google tasks with due dates show up in google calendar. I have google calendar synced to my ical and iphone cal no problem. But those tasks with due dates do not show up on the ical / iphone cal....
Does anyone have this working successfully?

You can download BB Bridge on your handheld, then bridge between HH and PB.
After installation, please do a hard reset for your HH.
refer to this KB, it can help you to set it up.
KB27823
I will try my best to help you with the issue you get.

MD04 dates not showing lead time scheduled dates

Hi experts,
In my MD04 screen, dates are not showing lead time scheduled dates (showing only basic dates scheduling) even after MRP run with lead time scheduling.
Please let me know if there is a way that the date column in MD04, shows the finish date from lead time scheduling.
thanks
Jay

Hello
Production dates are not displayed on MD04.
You can include additional fields on MD04 using a BAdI and you can use your own logic to add the production dates.
You will find the relevant BAdI on the following document:
BAdIs for MRP
BR
Caetano

After updating new MIC in QP02 in Back date not showing current date ?

Hi Guru,
I have updated some new MIC and some Changes are made in existing MIC in QP02 on back date. It is showing on same back date with all correction and new MIC but on today's date i.e. current date it is not showing in the system.
any can help me how to get in current date ?
There are some dump error , for these correction i have updated SNOTE 1467234 and 1471534 in Quality server, but no more effect.
Thanks,
Piyush Patel

hi,Premji,
I have updated existing QP in back date i.e. same as when created original date ( expiration date is long i.e. 31.12.9999) , then same thing i wanted to see all updated MIC should be reflect in current date, but it is not coming, so i have updated SNOTE- 1467234 and 1471534 then tried it.It is working fine some how but not as i want.Hence i thing it is solved my problem.
Thanks to you and Mr. Craig for your more suggestion/guidance.
Piyush Patel

Biztalk Bam data not showing up.

Similar Messages

Maybe you are looking for