Biztalk EDi schema Validation

Hi Experts,
Currently we are validating the EDI IFSCUM schemas at the pipeline level, now I have a requirement in such a way that the message should come to Orchestration and in Orchestration i will validate the incoming message against schema validation method.
I tried to keep the edivalidation set to false and dropped the message with wrong record count in UNT record.
But this message is failing at port level, i need to pass this message to orchestration.
How can i bypass these kind of validations at port level?

Hi Sandy,
Some of the EDI validations are performed always irrespective whether the EDI validation is enabled or not.
http://msdn.microsoft.com/en-us/library/bb226369.aspx
Refer the msdn article above. This specifies the validation that are performed always and validation which are done only if the EDI Data validation is enabled.
Regards, Vivin.

Similar Messages

BizTalk EDI pipeline not failing due to NTE^02 exceeding 80 characters

Hi,
I have a case where special characters are used in the free form description that is placed in an NTE^02 segment in an outbound EDI document. The maximum length allowed for NTE^02 is 80 characters. But if a special character (Europe) is in the text,
it is supposed to be counted as 2 characters not 1. This is not being caught by the BizTalk EDI pipeline and file is failing EDI validation on the partners side due to this.
Any ideas if this is a bug or I am not setting a configuration?
Thanks!

Then you need to check their Companion Guide, or ask them, exactly what character set they're expecting.
If they say
"SóME TEXT" is 10 characters, then they are likely expecting Basic, or maybe Extended which is single
byte encoding (it's just ASCII), but you are sending UTF8. "ó" is a valid Extended single byte character but in UTF8 would be double-byte.
X12 supports UTF8 so double-byte characters are allowed, provided both sides agree.
Whatever the correct value, the better place to set it would be in the Agreement.
Thanks. I'll it out.
The partner is using UTF-8 which is what i am setting (and default). So does that mean "ó" is correctly being seen by the partner as occupying 2 characters lengths?

BizTalk EDI Diassembler Pipeline Issue.

Hi All,
I am using BizTalk EDI Pipeline to diassemble an input EDIFACT D93A message. The message has IMD(Item Description) segment with a space between (: and Cream bar)like below and it is failing in the validation.
IMD+F++::: Cream Bar soap 4-pk'
QTY+12:15.000'
I dont have any party configured so as per my understanding, it will use the EDI Fallback properties where i set Validation property of "Leading and trailing spaces and zeros policy" to Allowed, but still it is getting failed.
Kindly help ?
Thanks,
Varun
Thanks, Varun

There seems to be other people experiencing problems with this features in 2013 / 2013 R2.
https://social.msdn.microsoft.com/Forums/en-US/c146a7e7-ebe6-4b43-8139-ac9d96f4a92d/biztalk-2013-failed-to-allow-leading-and-trailing-sapce-and-zero-on-party-agreement?forum=biztalkediandas2
Morten la Cour

Missing UNB and UNZ segments in D95B Codeco EDI Schema!

Hello,
I need to use the D95B Codeco EDI Schema in a map but the UNB and UNZ segments are missing from this schema. I read on the net that these segments have to be added in the pipeline using EDI Schema extensions and/or envelopes. How do I go about adding these
two segments to the shipped EDI Codeco schema without invalidating it?
Thanx a lot for your answers.

Hi BizTalkler,
As per your request have composed article (divided in three parts as it was too long) and helper class in this case is bit different as have considered subelement values as well (which was not in EDI X12), below are links:
BizTalk Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping - Part 1
BizTalk Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping- Part 2
BizTalk Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping- Part3
EDIFACTSegmentValueFetcher Helper Class
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping

Getting schema validation working in Eclipse with Coherence 3.7.1.0

Just wondered if anyone had got schema validation to work in Eclipse (3.5 - Galileo) for Coherence 3.7.1.0?
The Coherence developer docs show that you should add sections like this:
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config
coherence-pof-config.xsd">
However, if I use that "shortened" form (for cache, pof, etc. configs) Eclipse gives a warning "No grammar constraints (DTD or XML schema) detected for the document." and the schema validation fails to work (i.e. no "auto pop-ups" when entering content, and rubbish content is gladly accepted.)
In Coherence 3.7.0, I'd used the following "extended" form (note the longer "schemaLocation") to get things working correctly:
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config
http://xmlns.oracle.com/coherence/coherence-pof-config/1.0/coherence-pof-config.xsd">
Also note that entering the "http://xmlns.oracle.com/coherence/coherence-pof-config/1.0/coherence-pof-config.xsd" in a web browser opens the xsd, as you'd expect.
Now...
I'm looking at the PofAnnotationSerializer in 3.7.1.0 and the "auto indexing" option. The declaration in my pof file for it fails as the "class" (or fully-qualified java.lang.Class version) in the "init-params" section isn't valid. If I look at the xsd on the url above, this is indeed the case, that option does not appear.
However, if I look at the POF xsd in the coherence.jar file for 3.7.1.0, the "class" option has been added, and has a newer 'version="1.1"' added to it's schema declaration. So I therefore tried to point my "extended" declaration to point to " http://xmlns.oracle.com/coherence/coherence-pof-config/1.1/coherence-pof-config.xsd", in order to get schema validation to work in Eclipse with this new schema. Unfortunately that url doesn't exist - you get a "Content Server Request Failed" error.
So, I guess my question is, is there a way to get myself pointed at the 1.1 versions of the xsd's so I can have schema validation working in Ecliipse? Or is there another workaround (did a bit of Googling, but that mainly seemed to be people switching validation off to simply get rid of the error...)
Cheers,
Steve

Cheers, Dave.
I had in fact had a try at extracting the xsd and pointing to it directly, and that did indeed work (had to do this following the same steps shown below using an "entry" in the XML Catalog.)
I had a look around at some of the other "entries" in Eclipse by default and noticed that they actually refer to xsd's directly within the jars, hence saving the extraction step and keeping screw-ups down to a minimum; a bit of playing around to get the syntax right and I finally managed to get it working.
For those who are interested (NB. my Coherence 3.7.1.0 install is in a directory "c:\coherence3.7"), the steps are:
In Eclipse, Go to Window->Preferences->XML->XML Catalog. Then create a "User Specified Entry".
In the "Location", add (without the quotes): "jar:file:/C:/coherence3.7/coherence/lib/coherence.jar!/coherence-pof-config.xsd"
In the "Key Type", add (without the quotes): "Namespace Name"
In the "Key", add (without the quotes): "http://xmlns.oracle.com/coherence/coherence-pof-config"
The schema validation now works fine. Eclipse shows no warnings/errors, and the auto-complete and validation are fully functional.
Still, it would be nice to get the "1.1" urls updated to point to the schemas on the Oracle site, to avoid all our developers from having to make these changes (and of course avoid them pointing at an older, out-of-date local install of coherence.)
Cheers,
Steve

Schema Validator does not honor "nullable" attribute

Oracle XML Schema validator v1.0 does not seem to honor "nullable" schema attribute as in:
<xsd:element name='myelem' type='xsd:string' nullable='true'/>
On input
<myelem/> or <myelem></myelem>
it reports:
Element not completed: 'myelem'
Thanks
null

My mistake. Input must be specified as:
<myelem xsi:null="true">
where
xmlns:xsi="http://www.w3.org/1999/XMLSchema/instance"
null

Error : Catalog object schema validation failed in OBIEE 11.1.1.5

Hi all ,
Facing the below error while accessing few reports present in a folder (Voice Tab) . But , able to access other reports present in the same folder .
Catalog object schema validation failed: /users/weblogic/sayak/TPLAN reports/Voice Tab/Net revenue per minute (ILD\/NLD)
Error Details
Error Codes: AGFIXBO2:EIRWWH9E
Location: saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool, saw.threadpool, saw.threads
Also while try to edit the analysis (Net revenue per minute (ILD\/NLD) from catalog , i am getting the above error .The Reports were fine till yesterday , What could be the issue ?
Thanks

Hi Devarasu ,
Yeah .. I'm aware of this bug of 11.1.1.5 , but I'm puzzeled by the sudden impact of it . i.e , It didn't gave me the error while creating/editing the file yesterday and looked fine on dashboard as well .
However , If there's no alternative other than applying patch , then please let me know the patch ID .
And applying this patch means , just overwriting some configure files in the OBIEE home folder sructure ? or somthing else ?
Thanks

"Schema validation found non-data type errors" error when passing a string value to date field in infopath

Hi,
I have an infopath web brower enabled form. In the form i have a date field.
I am passing the data from the database to that field using the C# code.
But, as the field from database is coming as string, i am getting an error, and i am not able to assign the value.
I get the date value from database as "3/25/2011 12:00:00 AM"
I used the below code:
[CODE]
if (objInfopathFormcData.myRecievedDate != null)
myRoot.SelectSingleNode("/my:myFields/my:field97", NamespaceManager).SetValue(objInfopathFormcData.myRecievedDate);
[/CODE]
I am getting the error as "Schema validation found non-data type errors".
How to set the value for a date field in Infopath.
Thank you

HI,
I fixed it:
Below code is used to fix:
[CODE]
XPathNavigator xfield = null;
DateTime dtmyRecievedDate;
dtmyRecievedDate = Convert.ToDateTime(objInfopathFormcData.myRecievedDate);
if (objFormcData.FcCompletionDate != null)
xfield = myRoot.SelectSingleNode("/my:myFields/my:field97", NamespaceManager);
DeleteNil(xfield);
xfield.SetValue(dtmyRecievedDate.GetDateTimeFormats().GetValue(5).ToString());
// method to delete xsi:nil
private void DeleteNil(XPathNavigator nav1)
if (nav1.MoveToAttribute("nil", "http://www.w3.org/2001/XMLSchema-instance"))
nav1.DeleteSelf();
[/CODE]
Thank you

Processing Schema Validation error in BPM?

Hi all,
We have a file to IDOC scenario where if the schema validation fails on the file adapter sender agreement, we want to pull the filename and send it in an error email. So, we are talking about the adapter specific message attribute "Filename".
unfortunately, this does not seem to be available as a container element for alert catagories in ALRTCATDEF. So, we are starting to look into using BPM to send a email via the email adapter. However, since the validation happens prior to BPM being called I am at a bit of a loss. Any ideas on how to get the email with the filename out to the suport group would be appreciated.
Thanks,
Chris

package com.validate;
import com.sap.aii.mapping.api.*;
import com.sap.aii.mappingtool.tf7.rt.Container;
import java.io.*;
import javax.xml.transform.stream.StreamSource;
import javax.xml.validation.*;
public class ValidateXML extends AbstractTransformation {
    public void transform(TransformationInput transformationInput, TransformationOutput transformationOutput) throws StreamTransformationException {
        OutputStream outputstream = null;
        try {
            InputStream inputstream = transformationInput.getInputPayload().getInputStream();
            outputstream = transformationOutput.getOutputPayload().getOutputStream();
            byte[] b = new byte[inputstream.available()];
            inputstream.read(b);
            String XMLinputFileContent = new String(b);
            // define the type of schema - we use W3C:
            String schemaLang = "http://www.w3.org/2001/XMLSchema";
            // get validation driver:
            SchemaFactory factory = SchemaFactory.newInstance(schemaLang);
            //Place XSD file in PI server same as http://help.sap.com/saphelp_nwpi711/helpdata/en/44/0bf1b3ec732d2fe10000000a11466f/frameset.htm
            //OR I think you can place any where on server.
            File XSDfile = new File("C:/xi/runtime_server/validation/schema/SchemaFile.xsd");
            // create schema by reading it from an XSD file:
            Schema schema = factory.newSchema(new StreamSource(XSDfile));
            Validator validator = schema.newValidator();
            // at last perform validation:
            validator.validate(new StreamSource(XMLinputFileContent));
            //If XML it not valid, exception will be thrown, if it is valid sent this PassOutputXML to output
            String PassOutputXML = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns:MT_OutputXML xmlns:ns=\"http://sap.com/xi\"> <Name>FileName.txt</Name><Validation>Pass</Validation> </ns:MT_OutputXML>";
            outputstream.write(PassOutputXML.getBytes());
        } catch (Exception exception) {
            //Get File name using http://help.sap.com/saphelp_nwpi711/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
            Container container = null;
            DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
            DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
            String inputFileName = conf.get(key);
            String FailOutputXML = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns:MT_OutputXML xmlns:ns=\"http://sap.com/xi\"> <Name>" + inputFileName + "</Name><Validation>Fail</Validation> </ns:MT_OutputXML>";
            try {
                outputstream.write(FailOutputXML.getBytes());
            } catch (IOException ex) {
                exception.printStackTrace();
                ex.printStackTrace();

Schema Validation failure in SOA Suite 11.1.1.6.0 but not in 11.1.1.7.0

I have a composite that is deployed on both a SOA Suite 11.1.1.6.0 and 11.1.1.7.0 server.
The composite exposes a service that my application subscribes to and sends messages to so the BPMN process can handle the request.
This works fine in 11.1.1.7.0. However, in the older version, when the message gets sent out, I'm getting the error shown below.
I've made sure that Schema Validation is disabled on all of the endpoints, but that doesn't appear to have any affect. Any thoughts?
<Aug 29, 2013 12:00:59 PM EDT> <Error> <oracle.webservices.service> <OWS-04115><An error occurred for port: FabricProvider: javax.xml.rpc.soap.SOAPFaultException: Schema validation failed for message part parameters. Please ensure at the message sender level that the data sent is schema compliant. Attribute 'http://schemas.xmlsoap.org/soap/envelope/:encodingStyle' not expected..>
<Aug 29, 2013 12:01:00 PM EDT> <Error> <oracle.webservices.service> <OWS-04086>
<javax.xml.rpc.soap.SOAPFaultException: Schema validation failed for message part parameters. Please ensure at the message sender level that the data sent is schema compliant. Attribute 'http://schemas.xmlsoap.org/soap/envelope/:encodingStyle' not expected.
        at oracle.integration.platform.blocks.soap.WebServiceEntryBindingCompone
nt.generateSoapFaultException(WebServiceEntryBindingComponent.java:1193)
        at oracle.integration.platform.blocks.soap.WebServiceEntryBindingCompone
nt.processIncomingMessage(WebServiceEntryBindingComponent.java:971)
        at oracle.integration.platform.blocks.soap.FabricProvider.processMessage
(FabricProvider.java:113)
        at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing
(ProviderProcessor.java:1187)
        at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementatio
n(WebServiceProcessor.java:1112)
        at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(
ProviderProcessor.java:581)
        at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServicePr
ocessor.java:233)
        at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcess
or.java:193)
Thanks,
Mike

Any suggestions on this....

Error in schema validation in XI. Please help!

Hi Experts,
I have a FILE to proxy scenario. In the sender agreement I have selected schema validation by Adapter. (Other option is by Integration Engine). Now when the file I get an error in sender file communication channel monitoring:
Error: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: Schema DataIn.xsd not found in D:\usr\XXXXXXXXX\validation\schema\31f7c36098e411deadcae4d30a13c639\httptraining-00EIM_POC\DataIn_Async_Out\httptraining-00EIM_POC\DataIn.xsd (validation\schema)
Do I need to keep the schema file in some server location? Do I need to setup this path anywhere? Where do I need to place the schema file?
What is the difference between validation by adapter and by integration engine?
Please help!
Thanks
Gopal

>What is the difference between validation by adapter and by integration engine?
Both are same. One in Java engine and the other in the abap engine. If you set at one place that is good enough. In 7.1+ this becomes one of the pipeline steps.
>Do I need to keep the schema file in some server location? Do I need to setup this path anywhere? Where do I need to place the schema file
Yes you have to place schema in the server location.
Refer the Rajasekar document for the placing this file in the server location.

Persisting unexplained errors when parsing XML with schema validation

Hi,
I am trying to parse an XML file including XML schema validation. When I validate my .xml and .xsd in NetBeans 5.5 beta, I get not error. When I parse my XML in Java, I systematically get the following errors no matter what I try:
i) Document root element "SQL_STATEMENT_LIST", must match DOCTYPE root "null".
ii) Document is invalid: no grammar found.
The code I use is the following:
try {
Document document;
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
factory.setValidating(true);
factory.setNamespaceAware(true);
DocumentBuilder builder = factory.newDocumentBuilder();
document = builder.parse( new File(PathToXml) );
My XML is:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="SQL_STATEMENT_LIST" type= "SQL_STATEMENT_ITEM"/>
<xs:complexType name="SQL_STATEMENT_ITEM">
<xs:sequence>
<xs:element name="SQL_SCRIPT" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>

<xs:simpleType name="ApplicationType">
<xs:restriction base="xs:string">
<xs:enumeration value="DawningStreams"/>
<xs:enumeration value="BaseResilience"/>
<xs:enumeration value="BackBone"/>
</xs:restriction>
</xs:simpleType>

<xs:element name="SQL_SCRIPT" type= "SQL_STATEMENT"/>
<xs:complexType name="SQL_STATEMENT">
<xs:sequence>
<xs:element name="NAME" type="xs:string"/>
<xs:element name="TYPE" type="xs:string"/>
<xs:element name="APPLICATION" type="ApplicationType"/>
<xs:element name="SCRIPT" type="xs:string"/>

<xs:element name="FOLLOWS" type="xs:string" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
and my XML is:
<?xml version="1.0" encoding="UTF-8"?>

<SQL_STATEMENT_LIST xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.dawningstreams.com/XML-Schemas/SQLStatements.xsd">
<SQL_SCRIPT>
<NAME>CREATE_PEERS_TABLE</NAME>
<TYPE>CREATION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
CREATE CACHED TABLE PEERS (
PEER_ID VARCHAR(20) NOT NULL,
PEER_KNOWN_AS VARCHAR(30) DEFAULT ' ' ,
PRIMARY KEY ( PEER_ID )
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>CREATE_COMMUNITIES_TABLE</NAME>
<TYPE>CREATION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
CREATE CACHED TABLE COMMUNITIES (
COMMUNITY_ID VARCHAR(20) NOT NULL,
COMMUNITY_KNOWN_AS VARCHAR(25) DEFAULT ' ',
PRIMARY KEY ( COMMUNITY_ID )
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>CREATE_COMMUNITY_MEMBERS_TABLE</NAME>
<TYPE>CREATION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
CREATE CACHED TABLE COMMUNITY_MEMBERS (
COMMUNITY_ID VARCHAR(20) NOT NULL,
PEER_ID VARCHAR(20) NOT NULL,
PRIMARY KEY ( COMMUNITY_ID, PEER_ID )
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>DROP_PEER_TABLE</NAME>
<TYPE>DELETION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
DROP TABLE PEERS IF EXISTS
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>DROP_COMMUNITIES_TABLE</NAME>
<TYPE>DELETION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
DROP TABLE COMMUNITIES IF EXISTS
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>DROP_COMMUNITY_MEMBERS_TABLE</NAME>
<TYPE>DELETION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
DROP TABLE COMMUNITY_MEMBERS IF EXISTS
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>CREATE_COMMUNITY_MEMBERS_VIEW</NAME>
<TYPE>CREATION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
CREATE VIEW COMMUNITY_MEMBERS_VW AS
SELECT P.PEER_ID, P.PEER_KNOWN_AS, C.COMMUNITY_ID, C.COMMUNITY_KNOWN_AS
FROM PEERS P, COMMUNITIES C, COMMUNITY_MEMBERS CM
WHERE P.PEER_ID = CM.PEER_ID
AND C.COMMUNITY_ID = CM.COMMUNITY_ID
</SCRIPT>
<FOLLOWS>CREATE_PEERS_TABLE</FOLLOWS>
<FOLLOWS>CREATE_COMMUNITIES_TABLE</FOLLOWS>
</SQL_SCRIPT>
</SQL_STATEMENT_LIST>
Any ideas? Thanks !!!
J�r�me Verstrynge

Hi,
I found the solution in the following post:
Validate xml with DOM - no grammar found
Sep 17, 2003 10:58 AM
The solution is to add a line of code when parsing:
try {
Document document;
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
factory.setValidating(true);
factory.setNamespaceAware(true);
factory.setAttribute("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");
DocumentBuilder builder = factory.newDocumentBuilder();
document = builder.parse( new File(PathToXml) );
The errors are gone !!!
J�r�me Verstrynge

Help On schema validation

Hi,
I am a newbie in XML schema territory.
I generates a xml using 'SELECT XMLQuery( ...)' -- This finally works after upgrading to 10.2.0.3!
1) What methods do you recommend to validate the query result agaist the schema? The query result is first returned as 'XMLType' type, and then
I turned it into a CLOB.
At the end, I save the output into a file (via CLOB to String).
2) How do I register the schema in DB? Can I install the schema on the file system, instead? I am not sure which way is simpler and easier. I'd yearn for any simpler method, if any --- a common complaint from any beginner, I guess.
A few pointers will help me a great deal.
Sun

Sun,
You can take a look at an FAQ thread on this topic: How does XML DB handle XML Schema Validation ?
Regards,
Geoff

Java Stored Procedure SAXParser XML Schema Validation

Using Oracle XML Developers Kit 10.2.0.2.0 - Production.
Attempting to validate using XML Schema in a Java stored procedure with the code:
               if ( schemaDoc == null )
                    // Obtain default connection
                    Connection conn = new OracleDriver().defaultConnection();
                    OraclePreparedStatement stmt = (OraclePreparedStatement) conn.prepareStatement("SELECT XmlDocObj FROM XmlDoc WHERE XmlDocNbr = 2");
                    OracleResultSet rset = (OracleResultSet)stmt.executeQuery();
                    if ( rset.next() )
                         // get the XMLType
                         XMLType schemaXml = (XMLType)rset.getObject(1);
                         XSDBuilder builder = new XSDBuilder();
                         XMLSchema schemaDoc = (XMLSchema)builder.build(new InputSource(schemaXml.getInputStream()));
               if ( inst == null )
                    inst = new ValidateCoreRequest();
               ErrorHandlerImpl handler = inst.getNewErrorHandler();
SAXParser saxParser = new SAXParser();
saxParser.setXMLSchema(schemaDoc);
saxParser.setValidationMode(XMLParser.SCHEMA_VALIDATION);
saxParser.setErrorHandler(handler);
saxParser.parse(new InputSource(new StringReader(docStr)));
if( handler.validationError )
                    errorMsg[0] = handler.saxParseException.getMessage().substring(0, Math.min(199, handler.saxParseException.getMessage().length()));
Never reports validation errors in the XML. Although the XDK Programmers Guide states "...you can use
the oracle.xml.parser.schema.XSDBuilder class to build an XML schema and
then configure the parser to use it by invoking the XMLParser.setXMLSchema()
method. In this case, the XML parser automatically sets the validation mode to
SCHEMA_STRICT_VALIDATION and ignores the schemaLocation and
noNamespaceSchemaLocation attributes." No validation seems to occur. I have tried to set an xsi:noNamespaceSchemaLocation attribute on the root XML node, but this results in URL errors if the URL is not valid or schema build errors if the URL is valid, but does not point to a real location.
It appears that without a schema location attribute, no schema validation occurs. Using setXMLSchema() with a database source does not seem to cause the schema location attributes to be ignored. At least for Java stored procedures.
Does XML Schema validation work in the database for externally referenced schemas?
Thank You,
Art

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jan Vissers ([email protected]):
I have two schemas A and B. A contains a java stored procedure which calls a java stored procedure stored in B. Upon resolving the "A" Java Stored Procedures I get the following error:
ORA-29545: badly formed class: at offset 3093 of Adapter.TFADPBeschikbaarheid.sendAanvraag expecting a class-oracle.xml.parser.v2.XMLDocument but encountered a class-oracle.xml.parser.v2.XMLDocument.
... Question:
it is expecting something which it has in fact encountered... SO!!!! What is the error.
Thx,
Jan<HR></BLOCKQUOTE>
Try this:
Edit your XSU installation script located on lib directory of Oracle XSU's distribution:
Find the line:
loadjava -r -v -u $USER_PASSWORD xmlparserv2.jar
Replace by:
loadjava -r -v -g public -u $USER_PASSWORD xmlparserv2.jar
And installs your Oracle XSU again.
Best regards, Marcelo.

Urgent - please help with osb-service bus schema validation.

I have a proxyService runing on osb service bus, when I send wrong input to my proxyservices it react correctly by rejecting it, becuase the requestion is not conform to the schema, but I only get the error message saying that
the Input is does not much, is there a way to get more info about the error ?
like witch fields that cause the error ?

The fault variable in your stage error handler will have the approariate information. Just add a stage error handler in the stage you are doing schema validation (make sure that in validate action you are selecting "raise Error on validation failure") and the error handler log the $fault
Also refer -
Re: Validate each xml element against XML schema
Regards,
Anuj

Biztalk EDi schema Validation

Similar Messages

Maybe you are looking for