BIZTALK -"Name or Password is incorrect (repeat logon)" error

Hello,
I am working on a scenario wherein idoc has to be received from the BIZTALK server to SAP R3.
Initially the entire testing was done for a particular user id. Now that userid is changed.
Earlier a particular User ID say "XXX" was given to the BIZTALK people and corresponding settings were done at their end. I was able to receive the IDOC successfully with that User ID.
Now, when I have given a different User ID with same profile and authorization of "XXX", it is throwing
"Name or Password is incorrect (repeat logon)" error while sending idoc .
Do I need to maintain anything on the SAP end to resolve this ?? or some modifications are further required from the BIZTALK side ? If so, it would be of great help if anyone can provide me the details of the settings required on the biztalk side.
Regards,
Bhavesh

Maintain the USER ID & PWD in Capital Letters in BIZTALK & SAP System

Similar Messages

SAPJSF Name or password is incorrect (repeat logon) in NW SR3 NWDI deploy

Hi,
I am installing NW7.0 SR3
In step of deploying :
Initial setup of functional unit Development Infrastructure (DI all-in-one)
there is an error :
Name or password is incorrect (repeat logon)
Destination parameters
user : SAPJSF
password : % secure content %
host : localhost
sysnr : $$
client : 001
language : null
I tried to change the password in ume.r3.connection.master.passwd
which is exacting the same in ABAP side
but it doesn't work
Anyone has ides to solve this problems?
Thx.
John

ideally you should not use NWDI as an Add in, it is not a recommended scenario.
For problem shooting this I would look in the Server0 directory for the RFC trace file which should show you what the issue is.
If not I would then log onto the ABAP system with NWDI down, go to SM50 and increate the trace level of all DIA Wp's but only have the Security component ticked... then I would start up the J2EE and after it has failed to connect I would look through the trace files (after turning off tracing) looking for the word sapjsf. That should tell you exactly why it is failing.
hopefully the sysnr below of $$ was just a typo.
Ensure it is client 001 that you have changed the sapjsf password in (a common error)

STMS, RFC-error,Name or password is incorrect (repeat logon)

hi.
I' ve problem with stsm
i do :
1) import request from development system to test system
2) quit from stms
3) start stms and refresh queues and recive error:"RFC-error,Name or password is incorrect (repeat logon)"
after this, i do "reset user tmsadm" and "generate rfc destination" in test system and all works.
But when i do 1) 2) 3) all repates again .

Hello Denis
I have seen a problem recently relating to the error "Name or password is
inocorrect. Please re-enter." The error can be caused if you are not
using downward compatible passwords. Please check note 807895.
Ensure that the passwords are compatible, try entering the password in
uppercase and see if this helps.
Thanks
Kenny

Name or password is incorrect (repeat logon)

Hi,
I have a SAP gateway solution developed using librfc.a ( 46C) which is working fine in SAP R/3 system. I am trying to use the same solution to connect to SAP ERP Central Component 6.0. I am getting the following error in the dev_rfc file when i try to submit an IDOC to the SAP system.
             Name or password is incorrect (repeat logon)
            <* RfcReceive: returns 3:RFC_SYS_EXCEPTION
            <* RfcCallReceive: returns 3:RFC_SYS_EXCEPTION
Can some one tell me why this error is coming?
Thanks in advance,
Poornima.K

Passwords in 7.00 based system are case sensitive. If your password was created/change in the ERP 6.0 system you need to enter it in CAPITALS (because those were converted in older systems to capital automatically) if you want to use the old librfc.
Markus

Error message name or password is incorrect(repeat logon)

I installed netweaver2004s abap edition at window 2003 server and sapguid 640 with business explore.
I can login to NSP (netweaver) by ddic or bcuser, but I can't login to NSP through analyzer when I try to open query.
steps is as followings:
1. go to businese explore, and choose analyzer, excel sheet shows.
2. choose "open query", then sap logon screen pop up
3. I choose "NSP" and type client 000,user ddic and password minisap
4. get error message "name or password is incorrect(repeat logon)"
5. if I re-type the userid and password, try it again, another message is pop ip, it says the account is locked.
Do I need any setup at netweaver Bi administration side, I need your help.

I am having this same problem. Was there ever any solution posted?
Matt

(103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)

Hello gurus!!
I am logged into the portal through single sign on with my backend ECC. I am clicking on My ESS and I am getting this error:
(103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon).
Could anybody please let me know what could be wrong?
Thanks.
Maria Kutty

Maria,
You are probably not using either the correct username or the password.
Refer to this wiki.
http://wiki.sdn.sap.com/wiki/display/EP/TroubleshootingSAPJavaConnector%28JCo%29
Cheers!
Sandeep Tudumu

RFC Error - Name or Password is incorrect(Repeat Logon)

Hi,
I am trying to login to SAP Logon pad with a temporary password i was given and I get this error.
RFC Error - Name or Password is incorrect (Repeat logon).
Can anyone please help me on this.
Thanks
Syed

Hi Syed,
Validity of your temporary password might be over, please check with your administrator and paste the screenshot error and sap logon pad version too if possible.
regards
kartik

SM59 - Name or password is incorrect (repeat logon)

Hi Experts,
I am facing a weird situation.
I created a RFC type 3 and when I perform the Test Authorization , I get the error message:
Name or password is incorrect (repeat logon)
I can logon target system with the same user and password which I set in the RFC.
Any idea!?!?!?
Tks

HI,
have you did System copy recently on this system ?
check like this
go to secstore transaction
under check entries tab -> Selected applications -> select RFC destinations
execute
the result will show what could be the reason for the error ...
Thanks
Deepthi
Edited by: deeptss on May 19, 2011 4:57 AM

Cause:Name or password is incorrect (repeat logon)

Hi!
We installed SAP Solution Manager and SAP NetWeaver 7.0 (PI) on the same host.
I have executed the post installation step with wizard (step PI_00).
With the following step I got problems:
Execute SWF_XI_BPM_AUTO_CUSTOMIZE
Add Installed Product2
Configure the integration server for sld
Create Destination INTEGRATION_DIRECTORY_HMI
Create Destination AI_RUNTIME_JCOSERVER (ABAP)
Create Destination AI_DIRECTORY_JCOSERVER (ABAP)
Create Destination LCRSAPRFC (ABAP)
Create Destination SAPSLDAPI (ABAP)
Configure the Role of the Integration Service
Register Queues used by the Integration Server
The appropriate error here for all the steps:
(cause:Name or password is incorrect (repeat logon).
The further problem is that I cannot access to XI tools and get the following error:
Details
Cannot connect to Repository
STACKTRACE:
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
    at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.checkRepository(WizardContext.java:65)
    at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.init(WizardContext.java:75)
    at com.sap.aii.ibdir.gui.scenario.wizard.core.WizardContext.setWizard(WizardContext.java:260)
    at com.sap.aii.ibdir.gui.scenario.wizard.ConfigurationWizardCommand.execute
Can some one help me to solve this problem?
Thank you very much!
regards
Holger

Hi
Check this
Java Web Start
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]
Probably Javau2122 WebStart does not detect the correct Proxy Settings .
To change the Proxy Settings:
Select Windows Start menu -> All Programs -> Java Web Start -> Java Web Start
Choose File -> Preferences -> General
Choose None to switch off the proxy settings or Manual to set the HTTP Proxy and HTTP Port.
ChooseOK
Close Javau2122 Webstart

Logon fail get massage like "Name or password is incorrect(repeat logon)."

I need to use BAPI in my webdynpro application.So I am creating Model for this purpose.
On first screen which is
Screen 1)
"Select"
choose the model type you want to create-------
(.)Import Adaptive Model
Screen 2)
"Import Adaptive RFC Model"
I have given model name and name scpace.
Screen 3)
"SAP Logon Information Screen"
Single Server------
Host Name:xyz
sytem Number:00
User Acount-------
Client:000
Logon Name:pqr
Password:xxxxxx
Language:EN
But when i give this information and click on next it gives me error
Name or password is incorrect(repeat logon).
I check user name and pwd by logging SAP GUI and it is correct.
Can any one please let me know how do I proceed to solve this problem ?
Or is there any way to configure server credential in web dynpro ?
Thanks
Sunil Pawar

Hi,
thess pdfs may help you,
https://www.sdn.sap.com/irj/sdn/nw-wdjava?rid=/library/uuid/a00f7103-6790-2a10-ac9c-fcac7c5b18a3
Accessing ABAP Functions in Web Dynpro
/docs/DOC-8061#15
Regards,
ramesh

Name or password is incorrect (repeat logon) while sending idoc

Hi All,
In R/3 System we created RFC destination to PI system by using RFCUSER as logon parameters. while executing Test connection it is connecting.
While sending the IDoc from R/3 to SAP XI, it is giving message as "IDoc sent to R/3 System or external program" and immediately displaying the PI Logon Screen with my userid.
When I checked the SM58 , "Name or password is incorrect (repeat logon)" message is giving.
Whether I have to create RFC Destination by using my userid or it may work with RFCUSR id.
When I checked the RFC destinations in R/3 and PI it is working fine.
My userid and password is working properly.
What I done wrong?
Regards
Sridhar

Hi,
You have to do the following checks
1) Check whether that RFCUSER is Present in XI or Not???check in SU01 T-code
2) In Sm59 , do Remote Logon also, Here this time it shld connect to XI automatically with out asking any Logon Details .
3) If this is asking the Logon details means, the Logon details which u have provided in SM59 is Completly Wrong
Regards
Seshagiri

Name or password is incorrect (repeat logon) - rsplan t.code

hi friends,
We have bi 7.0 with SP 22 in abap and java.
In t.code rsplan when we try to start modeler we are getting like Name or password is incorrect (repeat logon).
please help to solve this issue.
Thanks,
Harish

i have checked that
http://pagebi.pageibm.com:50000/irj/portal
content admin ===> webdynpro
for jco connection BI_METADATA     Status O.K.     Create     Preview     Edit     Test     Ping     Remove
     BI_MODELDATA     Status O.K.     Create     Preview     Edit     Test     Ping     Remove
     WD_ALV_METADATA_DEST     Status O.K.     Create     Preview     Edit     Test     Ping     Remove
     WD_ALV_MODELDATA_DEST BI_METADATA     Status O.K.     Create     Preview     Edit     Test     Ping     Remove
     BI_MODELDATA     Status O.K.     Create     Preview     Edit     Test     Ping     Remove
and the user is available in portal and BI
Any more suggestions.
Thanks,

Subscription and push notifications - Name or password is incorrect (repeat logon)

Hi ,
while trying to execute the Push notification scenario,while executing I facing error as Incorrect user name and password, but user name and password are same .
By following the below thread i found that i have to assign S_BGRFC role to the user but after assigning Auth role also i'm facing same issue .
Error while executing a gateway ODATA serivce for push notifications.
Please suggest with valuable solutions,
Regards,
Lokeswar Reddy.

Im facing the below error exactly :

[ERROR]: Name or password is incorrect (repeat logon)

Guys,
In a transaction I use 2 action blocks for testing.
1st action block is a standard 'SAP JCO Interface' -- that one calls BAPI_PROCORD_GET_DETAIL
works A1
2nd action block is a standard 'SAP JCO Start Session' -- that one also calls BAPI_PROCORD_GET_DETAIL but always defaults to the error (msg found in subject header)
Both action blocks share the same 'SAP Server Details'
Server, client, system number, user name, pwd....
Any lead on troubleshooting will be greatly appreciated.
Martin

Martin,
JCo Start Session opens a session. To execute the BAPI, you need a second action block of type SAP JCo Function (Not SAP JCo Interface) which is linked to the Start Session action block. Then at some point you need to use either a JCo Commit or JCo Rollback. The logic is essentially the same as in SQL.
Good luck,
Mike

Deployable cannot be retrieved from FILE_PROVIDER , stopping. Cause:com.sap.conn.jco.JCoException: (103) JCO_ERROR_LOGON_FAILURE: Name or password is incorrect

Hi All,
After two years of CTS+ working without issue, in the last fortnight JCO_ERROR_LOGON_FAILURE has occurred. I have reviewed all the configuration in document http://scn.sap.com/doc/DOC-30177, and it all looks fine. The user configured also checks out fine as well. The user id that is causing all the trouble is CTS_<SID>. We chose this option so we could determine which user in case of future issues. We have two development paths, Project and BAU. So at anyone time transports that have started in the BAU development system will need to be imported into the Project development system (using transport express) and vice versa. Attached is the security authentication log from the system showing authentication failure. I have also checked the transport routes defined for the business systems in the SLD and these look fine as well. Roles assigned to the user are SAP_CTS_PLUS,
SAP_J2EE_ADMIN, SAP_XI_CMS_SERV_USER, SAP_XI_CONFIGURATOR, SAP_XI_DEVELOPER, Z_CTS_PLUS_ADDITIONAL. I have also checked the permissions on the file at the operating system level.
Any suggestions/advice gratefully received as this really has me scratching my head.
Log:
!REPOSITORY_ERROR_CHECK_STACKTRACE!
[EXCEPTION]
com.sap.conn.jco.JCoException: (103) JCO_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon) on DXI mshost strsap31
at com.sap.conn.jco.rt.MiddlewareJavaRfc.generateJCoException(MiddlewareJavaRfc.java:662)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.connect(MiddlewareJavaRfc.java:1364)
at com.sap.conn.jco.rt.ClientConnection.connect(ClientConnection.java:731)
at com.sap.conn.jco.rt.PoolingFactory.init(PoolingFactory.java:103)
at com.sap.conn.jco.rt.ConnectionManager.createFactory(ConnectionManager.java:293)
at com.sap.conn.jco.rt.DefaultConnectionManager.createFactory(DefaultConnectionManager.java:46)
at com.sap.conn.jco.rt.ConnectionManager.getFactory(ConnectionManager.java:262)
at com.sap.conn.jco.rt.RfcDestination.initialize(RfcDestination.java:509)
at com.sap.conn.jco.rt.RfcDestination.getSystemID(RfcDestination.java:533)
at com.sap.conn.jco.rt.RepositoryManager.getRepository(RepositoryManager.java:30)
at com.sap.conn.jco.rt.RfcDestination.getRepository(RfcDestination.java:603)
at com.sap.conn.jco.rt.RfcDestination.getRepository(RfcDestination.java:27)
at com.sap.cts.jco.tms.TmsJCoAdapter.initializeJCo(TmsJCoAdapter.java:76)
at com.sap.cts.jco.tms.TmsJCoAdapter.<init>(TmsJCoAdapter.java:57)
at com.sap.cts.jco.EpsFileReader.<init>(EpsFileReader.java:76)
at com.sap.cts.jco.EpsFileReaderController.doImport(EpsFileReaderController.java:90)
at com.sap.cts.core.ImportManager.execImport(ImportManager.java:102)
at com.sap.cts.ejb.DeployBean.execImport(DeployBean.java:170)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:47)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:37)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MethodRetry.invoke(Interceptors_MethodRetry.java:46)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138)
at com.sap.engine.services.ejb3.webservice.impl.DefaultImplementationContainer.invokeMethod(DefaultImplementationContainer.java:204)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process0(RuntimeProcessingEnvironment.java:710)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:662)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:322)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:199)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:65)
at com.sap.engine.services.webservices.servlet.SoapServlet.doPost(SoapServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:457)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:276)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: RfcException: [null]
message: Name or password is incorrect (repeat logon) on DXI mshost strsap31
Return code: RFC_SYS_EXCEPTION(3)
error group: 103
key: RFC_ERROR_LOGON_FAILURE
at com.sap.conn.rfc.api.RfcApi.RfcOpen(RfcApi.java:219)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.connect(MiddlewareJavaRfc.java:1331)
... 87 more
Caused by: RfcException: [DXI|strsap31]
message: Name or password is incorrect (repeat logon)
Return code: RFC_SYS_EXCEPTION(3)
error group: 104
key: RFC_ERROR_SYSTEM_FAILURE
Exception raised by DXI|strsap31
at com.sap.conn.rfc.engine.RfcIoOpenCntl.RfcReceive(RfcIoOpenCntl.java:2034)
at com.sap.conn.rfc.api.RfcApi.RfcOpen(RfcApi.java:187)
... 88 more
Caused by: com.sap.conn.rfc.exceptions.RfcGetException: Name or password is incorrect (repeat logon)
at com.sap.conn.rfc.engine.RfcImp.ab_rfcerror(RfcImp.java:1157)
at com.sap.conn.rfc.engine.RfcGet.rfcget_run(RfcGet.java:131)
at com.sap.conn.rfc.engine.RfcGet.ab_rfcget(RfcGet.java:23)
at com.sap.conn.rfc.engine.RfcRcv.ab_rfcreceive(RfcRcv.java:33)
at com.sap.conn.rfc.engine.RfcIoOpenCntl.RfcReceive(RfcIoOpenCntl.java:1981)
... 89 more

User id missing in client 000

BIZTALK -"Name or Password is incorrect (repeat logon)" error

Similar Messages

Maybe you are looking for