BizTalk Server 2010 Cumulative Update 6 - Compatibility with BTAHL7?
We recently installed BizTalk Server 2010 CU 6 in a development environment for testing. After the installation, the error below was generated when an HL7 message was submitted through an MLLP adapter to a request response receive location
with the BTAHL7ReceivePipeline receive pipeline and BTAHL7SendPipeline send pipeline. These pipelines are supplied in the BTAHL7 and have not been customized. We applied the udpate in an environment with our current state BizTalk Server
2010 CU5 and Biztalk Adapter Pack 2010 CU2 and in one with BizTalk Server 2010 CU5, Biztalk Adapter Pack 2010 CU3 and BTAHL7 Accelerator hot fixes 2564013, 2607536,2702143,2713884,2732905,2758524. In both cases, the same error was encountered. Has anyone else
experienced this issue?
"A pipeline component in the receive pipeline:"<pipeline info - version, culture and public key token>" is using the message context properties "BTS.MessageDestination" or "BTS.SuspendMessageOnRoutingFailure" in a
unsupported fashion. The pipeline processing is being terminated."
Hi rpara,
We can use BizTalk Server 2010 Cumulative Update 6 with HL7.
This cumulative update package for Microsoft BizTalk Server 2010 contains hotfixes for the BizTalk Server 2010 issues that were resolved after the release of BizTalk Server 2010.
For this issue, it's recommended to uninstall Update 6 first, and reinstall it again, and check whether it has same issue.
Cumulative update package 6 for BizTalk Server 2010
Service Pack and Cumulative Update list for BizTalk Server
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Connectivity problem with MS BizTalk Server 2010
Hi colleagues,
I have a connectivity problem between MS BizTalk Server 2010 and SAP.
There are two virtual machines (VMs on VMWare), the first one is SAP ERP6 Ehp6 (IDES), and second one is MS BizTalk Server 2010 (BT). On BT side I have deployed a package which sends ORDERS05 document to SAP and has to receive a reverse call. The bottom line is that SAP can receive a call from BT but cannot send a reverse call. Gateway monotor shows the connection:
In the trace file I can't see anything suspicious:
trc file: "dev_rd", trc level: 1, release: "721"
Tue Apr 01 20:14:28 2014
***LOG S00=> GwInitReader, gateway started ( 5060) [gwxxrd.c 1759]
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 136
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
pid 5060
gateway runs with dp version 138000(ext=120000) (@(#) DPLIB-INT-VERSION-138000-UC)
gateway (version=721.2013.09.02)
gw/reg_no_conn_info = 1
gw/local_addr : 0.0.0.0
gw/sim_mode : set to 0
***LOG S1I=> GwSetSimMode, Simulation Mode deactivated () [gwxxprf.c 4020]
* SWITCH TRC-RESOLUTION from 1 TO 1
CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
Tue Apr 01 20:14:29 2014
Bind service sapgw00 (socket) to port 3300
GwIInitSecInfo: secinfo version = 2
GwIRegInitRegInfo: reginfo version = 2
Tue Apr 01 20:14:30 2014
GwPrintMyHostAddr: my host addresses are :
1 : [192.168.1.127] WIN2008R2 (HOSTNAME)
2 : [127.0.0.1] WIN2008R2 (LOCALHOST)
Full qualified hostname = WIN2008R2
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpIPCInit2: read dp-profile-values from sys_adm_ext
DpShMCreate: sizeof(wp_adm) 42864 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000011A40050, size: 7174832)
DpShMCreate: allocated sys_adm at 0000000011A40060
DpShMCreate: allocated wp_adm_list at 0000000011A430B0
DpShMCreate: allocated wp_adm at 0000000011A432A0
DpShMCreate: allocated tm_adm_list at 0000000011A4DA20
DpShMCreate: allocated tm_adm at 0000000011A4DA70
DpShMCreate: allocated appc_ca_adm at 0000000011FA0390
DpShMCreate: allocated comm_adm at 0000000011FAFDA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000012101C40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000012101CF0
DpShMCreate: allocated j2ee_adm at 0000000012101D30
DpShMCreate: allocated ca_info at 0000000012102CB0
DpCommAttachTable: attached comm table (header=0000000011FAFDA0/ft=0000000011FAFDB0)
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
Tue Apr 01 20:14:45 2014
GwDpInit: attached to gw_adm at 0000000012101CF0
Tue Apr 01 20:16:21 2014
Prxy Trace = 0Hi Deepak,
Thanks for the answer, but this is not the case I'm afraid. I've received an error message for BizTalk instance:
"Microsoft.ServiceModel.Channels.Common.XmlReaderParsingException: The segment name is not valid for the IDOCTYP, Release, or CIMTYP. Segment name: E2EDP01006GRP IDOCTYP: ORDERS05 Release: 620 CIMTYP: . Ensure that your message xml validates against the operation schema.
Don't really understood what does it want from me... -
What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support -
Hi,
I need help in developing a customized pipeline for the Decoder Stage.
Requirement : Extract single or multiple files from a zipped folder with any format and extension (X12/EDIFACT/Flat/XML) and send to Disassemble stage for further action.
Need Urgent help.
Any suggestion or help is much appreciated.
Thanks & Best RegardsHi Siddharth,
Have look at article: BizTalk Server 2010: Processing Zip Message Having Multiple Type
Files and http://tech-findings.blogspot.com/2013/10/custom-zipreceivepipeline-to-unzip.html
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message -
Biztalk Server 2010 installation in production environment
Hi All,
Our client is undergoing an envirorment upgrade.
here i have to migrate biztalk server 2010 from production old envirorment to production new environment.
can anyone please suggest the links how to instal the biztalk server in production envirorment as visual studio is not present.
And what all the requirements to be considered before installation.
And if posiible please suggest in steps..
ThanksThe BizTalk Server documentation download (http://www.microsoft.com/en-in/download/details.aspx?id=11503) and specifically the Installing BizTalk 2010 and BAM in a multi-computer
environment document should get you up and running.
After that refer to the BizTalk 2010 Performance Optimization guide for the various SQL and OS related settings that should be configured. Examples being the registry key to address TCP/IP Port exhaustion, etc. (refer
http://www.microsoft.com/en-in/download/details.aspx?id=10855)
The BizTalk Server 2010 Operations guide is an excellent document for various Hot To's such as clustering the Master Secret, configuring the BizTalk Log Shipping, DR preparedness, etc. (refer
http://msdn.microsoft.com/en-us/library/gg634499.aspx)
Visual Studio on Production servers is not recommended. If gacutil is what you want then, you may choose to install ONLY the Visual Studio Developer Tools which would get you the required utilities.
You have not mentioned the version you're migrating from? As part of the BizTalk documentation there are migration documents such as for TPM Database, Parties, etc. which you might require.
For the applications (BizTalk), they would need to be migrated to .Net 4.0, recompiled and deployed.
Ideally you should setup a migration environment T & D where you'd examine and explore these various options including the suitability/applicability of the 3rd Party adapters/components that you currently use.
Regards. -
Error while installing BizTalk server 2010 on my local PC.
I am getting below error while configuring BTS 2010 on my system.
Please help me.
Microsoft.BizTalk.Bam.Management.BamManagerException: The database cannot be found. ---> System.Data.SqlClient.SqlException: Cannot open database "BAMPrimaryImport" requested by the login. The login failed.
Login failed for user 'SONY-VAIO\sony'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteQuery(String cmdText, CommandType cmdType, Transaction transaction)
--- End of inner exception stack trace ---
at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteQuery(String cmdText, CommandType cmdType, Transaction transaction)
at Microsoft.BizTalk.Bam.Management.BamConfigurationManager.GetConfigurationXmlFromPrimaryImportDb()
at Microsoft.BizTalk.Bam.Management.BamConfigurationManager..ctor(String piServer, String piDatabase, Int32 sqlHelperCmdTimeout, Boolean validateServerNames)
at Microsoft.BizTalk.Bam.Management.BamManager..ctor(String primaryImportServer, String primaryImportDatabase, Int32 sqlCmdTimeout, Boolean validateServerNames)
at Microsoft.BizTalk.Bam.Management.BamManager..ctor(String primaryImportServer, String primaryImportDatabase)
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.get_BamManager()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleGetActivities()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)This error is due to permissions problem in SQL.
The account SONY-VAIO\sony does not have access to database. Check if it is in BizTalk Server Administrators Group.
To be able to install and configure BizTalk Server 2010, you have to log on the server using an administrator account on the local computer.
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level -
So, I have decompressed my brand new download of Exchange 2013 SP1. This was downloaded from the link at the bottom of the post.
So to start my upgrade I have tried to start by running the schema preparation which then advises me that I am welcomed to:
'Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup'
Is this poor QA or was the incorrect file uploaded?
http://www.microsoft.com/en-us/download/details.aspx?id=41994Hello,
Powershell need full path to file you want to run.
So you should run .\setup.exe instead of just setup.exe.
Hope this help.
Regards, Pavel. -
Biztalk server 2010 Virtual Labs Demo code.
Hi,
Can anyone please tell me where from I can download all the demo code of the modules available in Biztalk server 2010 Virtual Labs?
Regards,
JoyHi,
BizTalkDevCourse.exe contains only documents no code.
There are 2 folders in in the Virtual Lab under C:/Allfiles path , DemoCode and Labfiles,
I am lokking for those codes. Is that possible to get those codes?
I am going through he documents available in BizTalkDevCourse.exe,
and these docs referring the code situated in that folder.That is the reason I am looking for those schemas etc.
Thanks,
Joy -
Trouble with iPhoto after latest update for compatibility with RAW-files
Hi all, I'm having serious trouble with iPhoto since the latest update for compatibility with RAW-files for digital fotocamera's (version 2.4).
After connection with the camera iphoto starts up as usual and i can start importing my pictures. So far all goes well. After having imported my pictures (visual with thumbs and so one) and having created an event iPhoto isn't able to show any pictures. Stopping and restarting Iphoto gives a message that there are a number of photo's available that havent been imported yet (!!???). I can choose to import or ignore. Whatever i choose i'm not capable of visualising the photo's.
Anyone with a similar problem and the solution? Can i remove the update?
I've tried several camera's all with the same problem.
thx for any replies
niki001Hi Terence, thanks for the reply (i'll wait with the downgrade for now ;-p).
I made a small step by step report of my findings:
1. Attach camera to imac
2. iPhoto starts up with previews of the pictures (so far so good)
3. Give event-name and start import ( so far so good)
4. 'Latest Import'-report all fine, previews ok, check with event : previews fine. All seems well
5. disconnect camera, stop iPhoto. As far as now all seems normal.
6. Restart iPhoto : Message 'iPhoto Library contains photo's which havent been imported. Import Y/N?'.!!!???
7. Option Y : IPhoto imports photo's imported in step 3 in a new event box (shown as a 'black box' on screen). Last made event (step 3) shows up as a black square in overview all events. Double click on event gives empty squares where previews should appear. Double click on photo preview gives large explanationmark on screen.
8. Drag event-box over screen shows thumbs within square, release event returns to 'black box'.
9. Shut down iPhoto.
10. Restart iPhoto jumps back to step 6 as long as i keep answering Y.(Each time creating a new extra 'black box event').
11. When i now look within iPhoto Library i can find a map Import in which i can find back the last imported photo's from step 3.
12. Dragging these pictures to my desktop (preview gives no problem at all) and from there back in to iPhoto simply recreats a new 'black box event'.
13. In step 6 option N gives a message 'creat iphoto Library recovered'. In iPhoto Library map Import has disapeared.
14.When looking into map 'iphoto Library recovered' i can find my originally iported photo's. However same problem as in step 12.
I used aperture (trial version) to see wether the problem could be photo-related, but here al goes well.
So, any idea's???
thx -
Host Integration Server 2013 Cumulative Update 2 (CU2) is available
This cumulative update package for Microsoft Host Integration Server 2013 contains hotfixes for issues that were fixed after the release of Host Integration Server 2013.
Important This cumulative update package includes all the component packages. However, the cumulative update package updates only those features that are currently installed on the system.
Download Link :
http://support.microsoft.com/kb/2929767
Many Thanks to the Product and Support TEAM ! You’ve done a great job !
Steve Melan - BCEE My Blog : http://stevemelan.wordpress.comHello Jason,
In your case I recommend you to use the Standard License as you are only using Host Integration Server 2013.
Then you will need for your architecture to license 16 Cores.
1 Core BizTalk 2013 License costs : about $2500
Total : 40.000€
As HIS 2013 is very performant, you can also use for instance only 1 CPU with 4 or 6 Core with higher Frequency per Server.
Here's a good article explaining the licensing model of BizTalk 2013 : http://blogs.biztalk360.com/understand-biztalk-server-2013-licensing/
Q: What license limitation should I consider with the BizTalk branch edition?
A: You may Run Instances of the software on Licensed Servers only at the endpoint of your internal network (or edge of your organization) to connect
business events or transactions with activities processed at that endpoint; provided, the Licensed Server may not:
act as
the central node in a “hub and spoke” networking model,
centralize enterprise-wide
communications with other servers or devices; or
automate business processes
across divisions, business units, or branch offices.
You may not use the server software, including the Master Secret Server, on a server that is part of a networked cluster or in an operating system environment
that is part of a networked cluster of OSEs on the same server.
Best Regards,
Steve Melan - BCEE My Blog : http://stevemelan.wordpress.com -
Hey guys...
Im a little bit confused... i wanted to download the newest hotfixes for SQL server 2012...
But the download for :
2983175 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack
is only for the platform: x86 available ... but my SQL server 2012 is running in a x64 environment...
(when i checked the older cumulative updates... they're all only for x86.. can someone tell me why ? )
thanks and regards,
DominicThere doesn't exist an SQL Express "Standard". It's two different editions.
For Express there are three 32bit/64bit editions:
Express, Express with Tools and Express with Advanced Services.
Express with Tools is essentially Express with Management Studio Tools, Express with Advanced Services adds also BI (Business Intelligence) + Reporting Services.
As for where you can apply the cumulative update, on the link you can see this:
Microsoft SQL Server 2012 Service Pack 2, when used with:
Microsoft SQL Server 2012 Analysis Services
Microsoft SQL Server 2012 Developer
Microsoft SQL Server 2012 Enterprise
Microsoft SQL Server 2012 Express
Microsoft SQL Server 2012 Business Intelligence
Microsoft SQL Server 2012 Standard
Microsoft SQL Server 2012 Web
"If there's nothing wrong with me, maybe there's something wrong with the universe!" -
Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
now, so I’m posting here in order to share this among others.
Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
Symptoms
E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
“#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
user wasn’t found.> #SMTP#”
Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
“Log Name: Application
Source: MSExchange Store Driver
Event ID: 1020
Level: Error
Description:
The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
Cause
In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
Group) remains with a Servers container, but no servers inside it.
During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
Resolution
To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
at your own risk.
1.
Start the ADSI Edit MMC Snap-in. Click Start, then
Run, and type adsiedit.msc, and then click OK.
2.
Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
CN=Configuration,DC=DNSDomainName,DC=com.
3.
Expand CN=Services, and then CN=Microsoft Exchange, and then expand
CN=YourOrganizationName.
4.
You will see an empty Administrative Group. Expand the
CN=YourAdministrativeGroupName.
5.
Expand CN=Servers.
6.
Verify there are no server objects listed under the
CN=Servers container.
7.
Right click on the empty CN=Servers container and choose
Delete.
8.
Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
Applies to
Exchange Server 2010, Standard Edition
Exchange Server 2010, Enterprise Edition
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx -
TCP/IP adapter in Biztalk Server 2010
I want to develop a TCP IP Custom adapter for BizTalk sever 2010...please any one help me to create the adapter or please share me the links for TCP IP adapter
HI Naresh,
You can find custom TC/IP adapter for BizTalk 2010 over codeplex .
http://tcpipbz2010.codeplex.com/
And list of custom adapters can be found on below techNet Wiki
http://social.technet.microsoft.com/wiki/contents/articles/12824.biztalk-server-list-of-custom-adapters.aspx
Thanks
Abhishek -
SQL Server 2008 Cumulative update
Hi All,
Please let me know if Cumulative Update 9 for SQL Server 2008 SP1 has been certified or not. Also what is an ETA.
Thanks.
Regards,
Raghu.SP1 was already certified. That's menas any cumulative patch for SP1can be applied without any problem because it can not cause any problem it can just fix some bugs from SQL or SSAS.
SAP BPC doesn't install any component into SQL server (database server , SQL or SSAS) which means applying a CU for SQL server cannot create any issue for BPC.
Regards
Sorin Radulescu -
When i opened firefox today , there were updates but when it tried to update it came back that java and real player updates were not compatable with my firefox. I have Firefox 6. Will these 2 programs still work all right if they are not updated?
I'm sorry I don't know what installed plugins I have. After putting in search it says I have Java 6 Standard Edition Update 26. I have Real Player(tm)(win32), Version 14.0.4 652. Hope that is enough informationI just had a similar issue and I ended having to manually clean up the registry to get Java working again.
I just got a new computer at work and it had Java 7 installed but it turns out an app we need to use at work doesn't work with Java 7, only Java 6.
I uninstalled Java 7 and installed Java 6 but Firefox was not showing the Java plugin as installed. I tried all sorts of things, including uninstalling and reinstalling Firefox and none of it worked. Finally I again uninstalled Java and then I searched for "Java" in the registry and found TONS of entries still in there for Java, including for Java 7. I manually deleted all the entries (WARNING: this is extremely risky) rebooted, then installed Java 6 and now it's working fine.
I really hate it when uninstallers leave stuff behind. It just makes a mess.
Maybe you are looking for
-
Flash/WebKitPluginHost 258 ERRORS
Tried searching, but couldn't quite find an answer. I've been having serious Flash issues lately, below is the error report... Process: WebKitPluginHost [258] Path: /System/Library/Frameworks/WebKit.framework/WebKitPluginHost.app/Contents/MacOS /WebK
-
Hi, I have done this using MS excel. In excel i plot a graph for the below values and i drew a trend line for that plot. from that i am able to find the order and equation of best fit. Is there any way to do this in Labview. Give me some examples
-
After Effects Windows 64 bit file won't open on Mac!
I have CC on a Windows 7 (64 bit) system and on a MAC OSX Snow Leopard, 2.66 Ghz Intel Core 2 Duo Version 10.6.8 and when attempting to open a Windows created After Effects file on the MAC got the "Can't open 64 bit version 12.2 file on this Mac" mes
-
Oracle scheduler : Setting job attributes using Enterprise Manager
Hi, I have created below job and set the attribute "'raise_events" using the dbms_scheduler.set_attribute procedure. begin dbms_scheduler.create_job ( 'ebj_A', job_action => '/tmp/job_A.ksh', job_type => 'Executable', enabled => false , auto_drop =>f
-
Hi All, Is there any PeopleSoft delivered tools using which we can track the queries ran by the users and the time taken for the query to complete. We need to track the chnages made to the quries and their previous run times. So we are looking for a