BizTalk Server BAM Issue

Hi,
We are unable to view applications transactions in BAM portal. few days we saw all transactions noe we getting error in BAM portal when I was trying to view all application transactions. already I am the member of that group.

Hi,
What is the error that you are getting??
If you are not getting any error then try the following
What is the activity windows set for the BAM activity?
Are you archiving the data to BAM archive database?
Use this command to get activity window
bm.exe get-activitywindow -Activity:<Give Name of your activity>
Use below command to check if you are archiving the data?
bm.exe get-archive -Activity:<Give Name of your activity>
The reason is here that after the activity period if you do not archive the BAM data, it will be purged but if you archive it, the data will move to the archive database..but in any case the data will not be visible in the portal.
Regards,
Mandar Dharmadhikari
If this helps You solve the issue please mark it as answer.

Similar Messages

BizTalk Server 2010 Cumulative Update 6 - Compatibility with BTAHL7?

We recently installed BizTalk Server 2010 CU 6 in a development environment for testing. After the installation, the error below was generated when an HL7 message was submitted through an MLLP adapter to a request response receive location
with the BTAHL7ReceivePipeline receive pipeline and BTAHL7SendPipeline send pipeline. These pipelines are supplied in the BTAHL7 and have not been customized. We applied the udpate in an environment with our current state BizTalk Server
2010 CU5 and Biztalk Adapter Pack 2010 CU2 and in one with BizTalk Server 2010 CU5, Biztalk Adapter Pack 2010 CU3 and BTAHL7 Accelerator hot fixes 2564013, 2607536,2702143,2713884,2732905,2758524. In both cases, the same error was encountered. Has anyone else
experienced this issue?
"A pipeline component in the receive pipeline:"<pipeline info - version, culture and public key token>" is using the message context properties "BTS.MessageDestination" or "BTS.SuspendMessageOnRoutingFailure" in a
unsupported fashion. The pipeline processing is being terminated."

Hi rpara,
We can use BizTalk Server 2010 Cumulative Update 6 with HL7.
This cumulative update package for Microsoft BizTalk Server 2010 contains hotfixes for the BizTalk Server 2010 issues that were resolved after the release of BizTalk Server 2010.
For this issue, it's recommended to uninstall Update 6 first, and reinstall it again, and check whether it has same issue.
Cumulative update package 6 for BizTalk Server 2010
Service Pack and Cumulative Update list for BizTalk Server
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Issue with BAM Tools configuration in Biztalk server 2013

Hi all,
When I configure biztalk server 2013 I am facing the the below mentioned warning,
I have followed the below mentioned link but still problem continues
http://social.msdn.microsoft.com/Forums/en-US/8f4833e7-89b9-41bb-bd52-c58228491cbd/how-to-restart-biztalk-service?forum=biztalkgeneral

This is a known issue. You need to install CU1 before configuring BAM:
BizTalk Server 2013 CU1
Morten la Cour

BAM Activity and view issue on BizTalk server 2013 R2 machine.

Hello all,
I am trying to make BAM portal work since couple of days but no luck yet...
I ma using BizTalk server 2013 R2.
I am trying to deploy the activity and view from my Development server to Test server ( it's working fine on Developemnt).
I have gone through one post and found this and followed steps here is the output for that :
First confirm that you can see the name of the activity in the list of deployed activity by executing this command:
bm.exe get-activities
--> I can see the activity name in there so I belive that activity is got created.
While creating the BAM activity you must have created/deployed a view get the name of the view by using this command:
bm.exe get-views -Activity:<activity name>
--> I can see the view name in there so I belive that view is exist.
You need to provide permission to the account you are using to access the BAM portal on this view by using this command.
bm.exe add-account -AccountName:”<AccountName>” -View:<viewname>
--> while executing this command is got error as :
Using 'BAMPrimaryImport' BAM Primary Import database on server 'TESTSERVER'...
ERROR: Security management of the BAM view failed.
The SQL role for the specified view is missing.
Note : My BAMAlert service is running and running using
GROUP\~biztalkservice account I am logged on Test Server using "NitinUser" account with administrator rights.
What does this mean - if this mean that I needs to give rights to my user (NitinUser) on SQL Database please tell me how to do that ? with command....
Thanks and Regards, Nitin.

Hi Nitin,
Can you try the solution as suggested by Thiago Almeida.
http://connectedthoughts.wordpress.com/2008/06/16/bam-deployment-gotchas/
His solution for this problem is to remove the view and re-add it, which worked for him. Obviously I didn't encounter this error, so have to suggest the solution from community.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Hello Ashwin,
As per that post the author was having issue that view was not created ...
also have noticed one thing that by executing following command in sql management studio.
use
BamPrimaryImport
SELECT
SUSER_SNAME(owner_sid),nameFROMsys.DATABASES
on my development box it's showing my user GROUP\nitinUser and Name = CustomBizTalkDB
but when I execute this on TEST server, entry for GROUP\nitinUser is not in database
Thanks and Regards, Nitin.

BAM Portal configuration error in BizTalk Server 2013 R2

I have tried 2 attempts to build out a BizTalk Server 2013 R2, I have followed the MSDN Install instructions, and I keep on getting an error when configuring BAM Portal. I have the logfile available, I need to know what the experts need to see in order to
give me an answer. Understand that we have been using BizTalk Server 2013 for the last two years, and a new developer wants the R2 version and BAM Portal configured. As an administrator I have fought this to no end, and now I have enough evidence to go back
to our project manager and explain why you do not install every feature on a server. Prove me wrong EXPERTS!

" I need to know what the experts need to see in order to give me an answer."
Experts needs:
1) Little background of the issue you are facing.
2) The log file generated.
3) The configuration of your server.
"now I have enough evidence to go back to our project manager and explain why you do not install every
feature on a server."
Disagree, It is indeed possible to install all the components and feature on a server. Somewhere someone would have installed BizTalk 2013 R2 and all its components in exactly same server configuration successfully in which you are trying to achieve, the
only difference could be a missing Package, Patch, Cumulative Update, Service or any configuration miss at your end.
Pls read more about BizTalk 2013R2 installation on Installation Overview for BizTalk Server 2013 and 2013 R2.
Review the Hardware
and Software Requirements for BizTalk Server 2013 and 2013 R2.
Understand the Considerations
Before Installing BizTalk Server 2013 and 2013 R2.
Prepare Your Computer for Installation.
Specifically for BAM Portal. Microsoft has documented Prerequisites, Permissions and Considerations.
Planning for the BAM Portal
I would advice you to refer this post by Sandro . BAM Portal configuration error
Rachit

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

Issues with creating and sending BOM XML IDOC to SAP using 2010 WCF-SAP Adapter (without using Biztalk Server)

I'm trying to replace an existing Biztalk 2006 Send BOM IDOC process, and completely remove Biztalk server from the equation. The existing Bizatalk 2006 server receives an input BOM (Bill of Materials) flat file, and using a Biztalk Map (BM08),
and Orchestration, generates an Idoc and sends it to SAP.
In my replacement C# program, I'm using the 2010 WCF-SAP Adapter, and am trying to generate the BOMMAT03 XML IDOC it to SAP.
I generated the BOMMAT03 schema from SAP using the Add Adapter Service in VS 2010. I was able to generate a BM08 XSLT from the existing BMO8 map in the current Biztalk 2006 process. I am able to run a XSLT transform on the input BOM flat
file, and generate an XML file from that.
However, I've run into a few issues. First of which, is that the XML file that is generated from the XSLT transform is NOT the same schema as the BOMMAT03 schema expects. It's somewhat similar, but different enough that I have to manually
translate between the two in my code. I've verified that both the original Bitztalk 2006 process and my replacement program use BOMMAT V3 from SAP. Question--Is Biztalk 2006 server doing some other magic to turn that transormed XML into the BOMMAT03
schema?
I ended writing code which translates the transformed XML into the BOMMAT03 schema (which is a strong typed XML IDOC at this point).
However, when I try to send the BOMMAT03 XML IDOC, I get an exception "Object reference not set to an instance of an object."
idocClient.Send(idocData, ref sadapterTxGuid);
idocData is of type BOMMAT03, and I've verified that the various fields are populated.
Any help is appreciated.

Well, putting in a MSDN subscription support ticket for Biztalk server actually helped with the issue. They didn't find, or fix the issue directly. But one of the examples (https://randypaulo.wordpress.com/tag/idoc/) they sent over, jogged my
memory, and I realized in the code snippet below, I had accidentally deleted the 1st line. Such a simple mistake, yet was easy to overlook. The URL example is almost EXACTLY like my code, but without the transform and translation code to convert
from input XML file to IDOC XML. If someone is interested in that, let me know.
//Forgot the 1st line.
idocClient = new IdocBOMMAT03SIEIS_WED_BOMMAT03V3R700Client(binding, endpointAddress);
idocClient.Send(idocData, ref sadapterTxGuid);
For anyone else interested in knowing, you CAN send a strongly typed IDOC to SAP using C#.NET and the WCF SAP 2010 Adapter, using the IDOC Binding Client class you generated using the Add Adapter Service Reference in VS2010.
The one difference, which no one, not even the tech support from MS could tell me, was why the XSLT which I generated from the original map, did not transform the input BOM XML into the BOMMAT03 XML. Instead, it transformed it into an intermediate
XML, which resembled the BOMMAT03 IDOC XML, but still needed to be translated to the BOMMAT03 IDOC format.
The tech support person swore up and down that it should. But I believe that something happens in Biztalk server, after the Mapping occurs, maybe in the Pipeline, which converts that
intermediate XML into the final BOMMAT03 IDOC XML format.
I do think that the examples are severely lacking in showing how to send a strong typed IDOC using C# and the WCF-SAP Adapter. Even worse, the examples are completely lacking in how to actually generate a weakly typed IDOC. They show how to send
that weakly typed IDOC, but show me, or give me a class to be able to generate it.
I realize that this is not quite the "recommended way" to do it, but in reality, not everyone wants or even needs a full Biztalk installation. For some simple stuff like this, a C#.NET program and WCF-SAP adapter do the trick.

Domain users creation for BizTalk server 2013 installation

Hi all,
I am setting up biztalk 2013 environment clustered BizTalk server and single sql server. I would like to know the list of domain users and domain groups to be created and which groups these users to be a member of. I am also installing and would be using
Sharepoint to develop BizTalk interfaces.
Thanks
Please Help
Vikram

Hi Vikram ,
You need to create below Windows group on your AD before you start your BizTalk Configuration .
1)SSO Administrators:Administrator of the Enterprise Single Sign-On (SSO) service.
2)SSO Affiliate Administrators :Administrators of certain SSO affiliate applications.Can create/delete SSO affiliate applications, administer user mappings, and set credentials for affiliate application users.
3)BizTalk Server Administrators:Has the least privileges necessary to perform administrative tasks Can deploy solutions, manage applications, and resolve message processing issues.
To perform administrative tasks for adapters, receive and send handlers, and receive locations, the BizTalk Server Administrators must be added to the Single Sign-On Affiliate Administrators.
4)BizTalk Server Operators:Has a low privilege role with access only to monitoring and troubleshooting actions
5) BizTalk Application Users:The default name of the first In-Process BizTalk Host Group created by Configuration Manager.Use one BizTalk Host Group for each In-Process host in your environment.Includes accounts with access to In-Process
BizTalk Hosts (hosts processes in BizTalk Server, BTSNTSvc.exe).
6)BizTalk Isolated Host Users :The default name of the first Isolated BizTalk Host Group created by Configuration Manager. Isolated BizTalk hosts not running on BizTalk Server, such as HTTP and SOAP.Use one BizTalk Isolated Host Group for
each Isolated Host in your environment.
7)BAM Portal Users :Has access to BAM Portal Web site.
8)BizTalk SharePoint Adapter Enabled Hosts :Has access to Windows SharePoint Services Adapter Web Service
9)BizTalk B2B Operators Group : A new BizTalk role that reduces the onus on the Administrators to perform all Party management operation. This role allows windows users associated with the role to perform all party management operations.
Now coming to domain User , you can have single -multiple setting were you can run SSO ,InProcess and Isolated on different domain user . You can also run all the configuration settings on single user as well .
Thanks
Abhishek

Problem in configuring "Group" in BizTalk Server Configuration

After installing BizTalk I am configuring it , Enterprise SSO is configured Successfully and then trying to configure Group,But it is failing.Below is the log file.
I have installed BizTalk Server 2010 and SL Server 2008 R2 in the same local machine.I have highlighted the part which I feel is giving problem, if you have solution for it please let me know.
And if you feel the issue is something different then also please tell me.
[2014-05-27 12:49:21:0335 Warning ConfigHelper] The serivce: MSSQLServerOLAPService does not exist. [2014-05-27 12:49:21:0336 Info ConfigHelper] SQL
Analysis service is not running on this machine. [2014-05-27 12:49:21:0355 Info Configuration Framework]Created IConfig2 object for feature: BAMPortal ProgID: MSEBiz.BAMConfigWizExt. [2014-05-27 12:49:21:0357 Info BAMConfigWizExt] C:\Users\DR111856\AppData\Local\Temp\ConfigLog(5-27-2014
12h49m18s).log [2014-05-27 12:49:21:0864 Warning ConfigHelper] The serivce: MSSQLServerOLAPService does not exist. [2014-05-27 12:49:21:0865 Info ConfigHelper] SQL Analysis service is not running on this machine. [2014-05-27 12:49:21:0872 Info
Configuration Framework]Created IConfig2 object for feature: MsEDIAS2 ProgID: Microsoft.BizTalk.Configuration.EDIAS2.EDIAS2Config. [2014-05-27 12:49:22:0033 Info EDIAS2Config] Entering function EDIAS2Config::Advise [2014-05-27 12:49:25:0972 Info Configuration
Framework]Leaving function LoadXMLfromModules() 2014-05-27 12:49:44:1693 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BizTalkMgmtDb on server ABCDEF\BIZTALKDB is not compatible. 2014-05-27 12:49:44:1703 [Info]
CfgExtHelper Connecting to the BAM Primary Import Table Database BAMPrimaryImport on server ABCDEF\BIZTALKDB 2014-05-27 12:49:44:1753 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BAMPrimaryImport on server
ABCDEF\BIZTALKDB is not compatible. 2014-05-27 12:49:44:1773 [Info] BAMTools Updates server ABCDEF\BIZTALKDB. 2014-05-27 12:49:44:1773 [Info] BAMTools Splitting the server name: ABCDEF\BIZTALKDB 2014-05-27 12:49:44:1773 [Info] BAMTools Split the server name
ABCDEF\BIZTALKDB into server ABCDEF\BIZTALKDB and port . 2014-05-27 12:49:44:1773 [Info] BAMTools Updated server name ABCDEF\BIZTALKDB to ABCDEF\BIZTALKDB 2014-05-27 12:49:44:1773 [Info] BAMTools Determining version of Microsoft SQL Server installed on server
ABCDEF\BIZTALKDB. 2014-05-27 12:49:44:1813 [Info] BAMTools Found Microsoft SQL Server installed with version 10.50.1600.1. 2014-05-27 12:49:44:1813 [Info] BAMTools Microsoft SQL Server 2008 with SP1 or higher is installed on server ABCDEF\BIZTALKDB. 2014-05-27
12:49:44:1813 [Info] BAMTools Microsoft SQL Server 2008 with SP1 or higher is installed on: ABCDEF\BIZTALKDB 2014-05-27 12:49:44:1823 [Info] CfgExtHelper The length of BAMAnalysis is 11. 2014-05-27 12:49:44:1823 [Info] BAMTools Determining version of Microsoft
SQL Server Analysis Services installed on server ABCDEF\BIZTALKDB. 2014-05-27 12:49:44:1933 [Info] BAMTools Found Microsoft SQL Server Analysis Services installed with version 10.50.1600.1. 2014-05-27 12:49:44:1933 [Info] BAMTools Microsoft SQL Server Analysis
Services 2008 with SP1 or higher is installed on server ABCDEF\BIZTALKDB. 2014-05-27 12:49:44:1933 [Info] BAMTools Determining whether Microsoft SQL Server Data Transformation Services (DTS) 2008 with SP1 or higher for BAM Analysis is installed on the local
machine. 2014-05-27 12:49:44:2053 [Info] BAMTools Determining whether Microsoft SQL Server 2005 Analysis Management Objects (AMO) is installed on the local machine. 2014-05-27 12:49:44:2053 [Info] BAMTools Finding assembly named Microsoft.AnalysisServices
in Global Assembly Cache. 2014-05-27 12:49:44:6963 [Info] BAMTools Microsoft SQL Server 2005 Analysis Management Objects (AMO) is installed on the local machine. [2014-05-27 12:49:44:0697 Info ConfigHelper]         Feature:
OLAPNS is installed 2014-05-27 12:49:44:6973 [Info] BAMTools Determining whether Microsoft Sql Notification Services 2005 is installed on the local machine. 2014-05-27 12:49:44:6973 [Info] BAMTools Product with product key {63A5DC0D-1EDD-4D69-8F31-87FAEB1F7084}
is not installed. 2014-05-27 12:49:44:6983 [Info] BAMTools Product with product key {C0B81E26-F7D0-4E84-941A-21C438BC586D} is not installed. 2014-05-27 12:49:44:6983 [Info] BAMTools Product with product key {EA145881-7452-4004-80B9-971FC3D1D8D8} is not installed.
2014-05-27 12:49:44:6983 [Info] BAMTools Product with product key {63A5DC0D-1EDD-4D69-8F31-87FAEB1F7084} is not installed. 2014-05-27 12:49:44:6993 [Info] BAMTools Product with product key {C0B81E26-F7D0-4E84-941A-21C438BC586D} is not installed. 2014-05-27
12:49:44:6993 [Info] BAMTools Product with product key {EA145881-7452-4004-80B9-971FC3D1D8D8} is not installed. [2014-05-27 12:49:44:0700 Info BAMTools] Built feature XML: <Configuration><Feature Name="BAMTools" DisplayName="Business
Activity Monitoring tools" Version="1.0" Description="Tools for the creation and maintenance of the SQL Server and Analysis Server (OLAP) infrastructure for Business Activity Monitoring."><SQL ID="{E1FC3106-8DD4-4f12-9EB6-849DD8BDD605}"
DisplayName="BAM Primary Import Database" Description="SQL database used to store the events from the Business Activities and then query for the progress and data of the activity instances. This database is also used for real-time aggregations."
ReadOnly="false"><Server>ABCDEF\BIZTALKDB</Server><Database>BAMPrimaryImport</Database><WindowsSecurity Editable="no">yes</WindowsSecurity><UserName></UserName><Password></Password></SQL><SQL
ID="{1D372BCB-DF59-43b6-A4A9-87082B5727B0}" DisplayName="BAM Archive Database" Description="SQL database used for archiving the Business Activity data which is too old. It is recommended to create the BAM Archive database to minimize
the accumulation of Business Activity data in the BAM Primary Import Database." ReadOnly="false"><Server>ABCDEF\BIZTALKDB</Server><Database>BAMArchive</Database><WindowsSecurity Editable="no">yes</WindowsSecurity><UserName></UserName><Password></Password></SQL><Question
ID="{12A38787-6B24-40ab-8888-5FE8ABA87B26}" Text="Enable A&nalysis Services for BAM aggregations" Answers="Yes,No" Default="Yes" ReadOnly="false"><Answer Value="Yes" GUID="{902F7E20-D6AE-453f-9D23-935ED7AF94C3}"
Selected="Yes"><SQL ID="{16567D1E-6946-4f4e-BB3F-900DE2648328}" DisplayName="BAM Analysis Database" Description="Analysis Services database that keeps the aggregated historical data for Business Activities" ReadOnly="false"
MSOLAPServer="Yes"><Server>ABCDEF\BIZTALKDB</Server><Database>BAMAnalysis</Database><WindowsSecurity Editable="no">yes</WindowsSecurity><UserName></UserName><Password></Password></SQL><SQL
ID="{B973DB76-BA7F-4a2e-A57E-07EEF54B37A8}" DisplayName="BAM Star Schema Database" Description="SQL database used to transform the data collected from the Business Activity Monitoring for OLAP Processing. This database is required
when the BAM Analysis database is used." ReadOnly="false"><Server>ABCDEF\BIZTALKDB</Server><Database>BAMStarSchema</Database><WindowsSecurity Editable="no">yes</WindowsSecurity><UserName></UserName><Password></Password></SQL></Answer><Answer
Value="No" GUID="{FC612DFE-1273-4f57-8EE3-95216638A67B}"/></Question><Question ID="{308cc88b-9e51-4103-ae4c-73300e02a7eb}" Text="&Enable SQL Notification Services for BAM alerts" Answers="Yes,No"
Default="No" ReadOnly="true"><Answer Value="Yes" GUID="{458e1878-eae6-4e09-8e5c-ba516548ceac}"><Name ID="{8B3212A1-44EA-46bc-A06C-75E289D1F840}" DisplayName="S&QL Server for Alerts
Databases:" Description="Notification Services server for BAM Alerting." Hidden="false" ReadOnly="true"><Value></Value></Name><Name ID="{1DAFDF2D-4377-415a-B1CA-2C5B3729A244}" DisplayName="Prefix
for Alerts Database &Names:" Description="Notification Services database root name for BAM Alerting." Hidden="false" ReadOnly="true"><Value></Value></Name><NTService ID="{c116ba3f-06d0-48cf-b0a1-4b263b07250e}"
DisplayName="BAM Notification Services User" Description="Windows account that will have permissions to access the data in the BAM Notification Services databases during Business Activity searches." ReadOnly="true"><UserName></UserName><Domain></Domain><Password></Password></NTService><Name
ID="{33c8fd0a-c89d-4dd0-8b2b-2ddacc6620e6}" DisplayName="BAM Alerts &SMTP Server:" Description="SMTP server to use for sending out BAM Alerting messages." Hidden="false" ReadOnly="true"><Value></Value></Name><Name
ID="{335b35f5-ffc4-4c7e-8cfc-582ec6bab9e0}" DisplayName="BAM Alerts File &Location:" Description="File system location to use for writing out BAM Alerting messages. If you accept this default location for delivering alerts
by file, Configuration will create the file share and grant write permissions to the SQL NS service account and the current logged-on user." Hidden="false" ReadOnly="true"><Value></Value></Name></Answer><Answer
Value="No" GUID="{3d95a679-aa37-403f-bf64-194e6aa2d993}" Selected="Yes"/></Question><Question ID="{FC99D786-2D26-489b-A748-42AE4DD0F6FC}" Text="&Remove the Business Activity Monitoring tools
for this Biztalk Group" Answers="Yes,No" Default="No" ReadOnly="true"><Answer Value="Yes" GUID="{4CF85429-F0DA-4ca3-8068-D125506A3FD9}"/><Answer Value="No" GUID="{5823E008-032F-4917-9EE5-B0AB4A18325C}"
Selected="Yes"/></Question></Feature></Configuration> 2014-05-27 12:49:44:7233 [Info] BAMTools Updated server name ABCDEF\BIZTALKDB to ABCDEF\BIZTALKDB 2014-05-27 12:49:44:7233 [Info] CfgExtHelper Checking the connection to the
BizTalk Management Database: BizTalkMgmtDb on server ABCDEF\BIZTALKDB 2014-05-27 12:49:44:7273 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BizTalkMgmtDb on server ABCDEF\BIZTALKDB is not compatible. 2014-05-27
12:49:44:7313 [Info] BAMTools Found Microsoft SQL Server installed with version 10.50.1600.1. 2014-05-27 12:49:44:7313 [Info] BAMTools Microsoft SQL Server 2008 with SP1 or higher is installed on server ABCDEF\BIZTALKDB. 2014-05-27 12:49:44:7313 [Info] BAMTools
Microsoft SQL Server 2008 with SP1 or higher is installed on: ABCDEF\BIZTALKDB [2014-05-27 12:49:44:0932 Info ConfigHelper] SQL Server name is: ABCDEF [2014-05-27 12:49:44:0945 Info ConfigHelper]         Validated
SQL credentials for user: SSPI on computer: ABCDEF\BIZTALKDB 2014-05-27 12:49:44:9473 [Info] CfgExtHelper Connecting to the BAM Primary Import Table Database BAMPrimaryImport on server ABCDEF\BIZTALKDB 2014-05-27 12:49:44:9523 [Info] CfgExtHelper The BAM Primary
Import Database found from the BizTalk Management Database BAMPrimaryImport on server ABCDEF\BIZTALKDB is not compatible.        Validated SQL credentials for user: SSPI on computer: ABCDEF\BIZTALKDB 2014-05-27 12:49:44:9813
[Info] CfgExtHelper Connecting to the BAM Primary Import Table Database BAMPrimaryImport on server ABCDEF\BIZTALKDB 2014-05-27 12:49:44:9843 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BAMPrimaryImport on
server ABCDEF\BIZTALKDB is not compatible. [2014-05-27 12:49:44:0984 Info BAMConfigWizExt] Leaving function: CBAMConfigWizExt::ValidateFeature [2014-05-27 12:49:44:0987 Info Configuration Framework]BAMToolsControl InitializeControls() [2014-05-27 12:49:44:0991
Info Configuration Framework]BAMToolsControl Load() [2014-05-27 12:49:44:0996 Info Configuration Framework]BAMPortalControl InitializeControls() [2014-05-27 12:49:45:0005 Info Configuration Framework]BAMPortalControl Load() [2014-05-27 12:49:45:0008 Info EDIAS2Config]
Entering function EDIAS2Config::GetFeatureConfig [2014-05-27 12:49:45:0010 Info EDIAS2Config] Leaving function EDIAS2Config::GetFeatureConfig [2014-05-27 12:49:45:0011 Info Configuration Framework]EDIAS2Control InitializeControls [2014-05-27 12:49:45:0022
Info Configuration Framework]EDIAS2Control Load [2014-05-27 12:49:45:0024 Info BAMConfigWizExt] Entering function: CBAMConfigWizExt::GetFeatureConfig [2014-05-27 12:49:45:0026 Info BAMConfigWizExt] Building feature XML for: BAMPortal [2014-05-27
12:49:45:0028 Info ConfigHelper]         Feature: WMI is installed 2014-05-27 12:49:45:0283 [Info] BAMTools Updates server ABCDEF\BIZTALKDB. 2014-05-27 12:49:45:0283 [Info] BAMTools Splitting the server name:
ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0283 [Info] BAMTools Split the server name ABCDEF\BIZTALKDB into server ABCDEF\BIZTALKDB and port . 2014-05-27 12:49:45:0283 [Info] BAMTools Updated server name ABCDEF\BIZTALKDB to ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0283
[Info] CfgExtHelper Checking the connection to the BizTalk Management Database: BizTalkMgmtDb on server ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0333 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BizTalkMgmtDb on
server ABCDEF\BIZTALKDB is not compatible. 2014-05-27 12:49:45:0343 [Info] BAMTools Updates server ABCDEF\BIZTALKDB. 2014-05-27 12:49:45:0343 [Info] BAMTools Splitting the server name: ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0343 [Info] BAMTools Split the server
name ABCDEF\BIZTALKDB into server ABCDEF\BIZTALKDB and port . 2014-05-27 12:49:45:0343 [Info] BAMTools Updated server name ABCDEF\BIZTALKDB to ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0343 [Info] CfgExtHelper Connecting to the BAM Primary Import Table Database
BAMPrimaryImport on server ABCDEF\BIZTALKDB 2014-05-27 12:49:45:0373 [Info] CfgExtHelper The BAM Primary Import Database found from the BizTalk Management Database BAMPrimaryImport on server ABCDEF\BIZTALKDB is not compatible. 2014-05-27 12:49:45:0383 [Info]
BAMPortal Determining version of IIS. 2014-05-27 12:49:45:0383 [Info] BAMPortal Opening local registry key: SOFTWARE\Microsoft\InetStp 2014-05-27 12:49:45:0383 [Info] BAMPortal Getting registry value: MajorVersion 2014-05-27 12:49:45:0383 [Info] BAMPortal
IIS version is: 7 2014-05-27 12:49:45:0393 [Info] BAMPortal Determining version of IIS. 2014-05-27 12:49:45:0393 [Info] BAMPortal Opening local registry key: SOFTWARE\Microsoft\InetStp 2014-05-27 12:49:45:0393 [Info] BAMPortal Getting registry value: MajorVersion
2014-05-27 12:49:45:0393 [Info] BAMPortal IIS version is: 7 [2014-05-27 12:49:45:0040 Info BAMPortal] Built feature XML: <Configuration><Feature Name="BAMPortal" DisplayName="BAM Portal" Version="1.0" Description="The
Business Activity Monitoring (BAM) Portal is used to query individual instance data stored in the Tracking database. Each BAM Query Web Service corresponds to one SQL database."><NTService ID="{C08C5A6C-53FB-41bd-A1CE-FD7209FD16F4}" DisplayName="BAM
Management Web Service user" Description="Windows account that will have permissions to access the data in the BAM Primary Import Database during Business Activity searches." ReadOnly="false"><UserName></UserName><Domain></Domain><Password>*Hidden*</Password></NTService><NTService
ID="{FAAB0AD8-C414-4735-91E5-3DCEC8CB96A8}" DisplayName="BAM Application Pool Account" Description="Identity of the BAM Application Pool. " ReadOnly="false"><UserName></UserName><Domain></Domain><Password>*Hidden*</Password></NTService><NTCredential
ID="{e8118b16-0585-41a4-99bb-6d8a30570fcc}" DisplayName="BAM Portal Users" Description="The user accounts under which the BAM portal services run." ReadOnly="false"><NTAccount ScopeType="103" UpLevelFlags="676"
DownLevelFlags="2147483654">Everyone</NTAccount></NTCredential><WebSite ID="{DA1ABC72-465B-4953-ADD7-98CEA6F4E503}" DisplayName="BAM Portal Web &Site:" Description="Specify the name of the web site
under which the BAM Portal virtual directory will be created." ReadOnly="false"><WebSiteName>Default Web Site</WebSiteName></WebSite></Feature></Configuration> [2014-05-27 12:49:45:0041 Info BAMConfigWizExt]
Leaving function: CBAMConfigWizExt::GetFeatureConfig [2014-05-27 12:49:45:0042 Info Configuration Framework]BAMPortalControl InitializeControls() [2014-05-27 12:49:45:0050 Info Configuration Framework]BAMPortalControl Load() [2014-05-27 12:49:45:0052 Info
RulesEngine] Entering function GetFeatureConfig [2014-05-27 12:49:45:0053 Info RulesEngine] Management database (server = 'ABCDEF\BIZTALKDB', database = 'BizTalkMgmtDb') doesn't exist [2014-05-27 12:49:45:0053 Info RulesEngine] No previously configured Rules
database discovered [2014-05-27 12:49:45:0055 Info RulesEngine] Unable to access 'RuleEngineUpdateService'. [2014-05-27 12:49:45:0056 Info RulesEngine] Leaving function GetFeatureConfig [2014-05-27 12:49:45:0057 Info Configuration Framework]RulesEngineControl
InitializeControls [2014-05-27 12:49:45:0064 Info Configuration Framework]RulesEngineControl Load [2014-05-27 12:49:45:0066 Info EDIAS2Config] Entering function EDIAS2Config::GetFeatureConfig [2014-05-27 12:49:45:0068 Info EDIAS2Config] Leaving function EDIAS2Config::GetFeatureConfig
[2014-05-27 12:49:45:0068 Info Configuration Framework]EDIAS2Control InitializeControls [2014-05-27 12:49:45:0079 Info Configuration Framework]EDIAS2Control Load [2014-05-27 12:49:46:0485 Info Configuration Framework]Entering function ValidateSQLCredentials.
[2014-05-27 12:49:46:0497 Info Configuration Framework]Leaving function ValidateSQLCredentials. [2014-05-27 12:49:46:0498 Info BtsCfg] Entering function: CBtsCfg::ValidateFeature [2014-05-27 12:49:46:0501 Info BtsCfg]       Validating
feature: WMI [2014-05-27 12:49:46:0501 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0502 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0509 Info ConfigHelper]         Feature:
Engine is installed [2014-05-27 12:49:46:0517 Info ConfigHelper] SQL Server name is: ABCDEF [2014-05-27 12:49:46:0523 Info ConfigHelper]         Validated SQL credentials for user: SSPI on computer:
ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0543 Info ConfigHelper]         Executed SQL statement on database: master on computer: ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0549 Info ConfigHelper]         Did
not find existing database: BizTalkMgmtDb on computer: ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0550 Info BtsCfg] Leaving function: CBtsCfg::ValidateFeature [2014-05-27 12:49:46:0551 Info Configuration Framework]Entering function ValidateSQLCredentials.
[2014-05-27 12:49:46:0552 Info Configuration Framework]Leaving function ValidateSQLCredentials. [2014-05-27 12:49:46:0552 Info BtsCfg] Entering function: CBtsCfg::ValidateFeature [2014-05-27 12:49:46:0554 Info BtsCfg]       Validating
feature: WMI [2014-05-27 12:49:46:0554 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0554 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0559 Info ConfigHelper]         Feature:
Engine is installed [2014-05-27 12:49:46:0565 Info ConfigHelper] SQL Server name is: ABCDEF [2014-05-27 12:49:46:0571 Info ConfigHelper]         Validated SQL credentials for user: SSPI on computer:
ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0582 Info ConfigHelper]         Executed SQL statement on database: master on computer: ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0588 Info ConfigHelper]         Did
not find existing database: BizTalkMsgBoxDb on computer: ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0589 Info BtsCfg] Leaving function: CBtsCfg::ValidateFeature [2014-05-27 12:49:46:0589 Info Configuration Framework]Entering function ValidateSQLCredentials.
[2014-05-27 12:49:46:0590 Info Configuration Framework]Leaving function ValidateSQLCredentials. [2014-05-27 12:49:46:0590 Info BtsCfg] Entering function: CBtsCfg::ValidateFeature [2014-05-27 12:49:46:0592 Info BtsCfg]       Validating
feature: WMI [2014-05-27 12:49:46:0593 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0593 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:49:46:0597 Info ConfigHelper]         Feature:
Engine is installed [2014-05-27 12:49:46:0605 Info ConfigHelper] SQL Server name is: ABCDEF [2014-05-27 12:49:46:0611 Info ConfigHelper]         Validated SQL credentials for user: SSPI on computer:
ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0621 Info ConfigHelper]         Executed SQL statement on database: master on computer: ABCDEF\BIZTALKDB [2014-05-27 12:49:46:0626 Info ConfigHelper]         Did
not find existing database: BizTalkDTADb on computer: ABCDEF\BIZTALKDB [2014-05-27 12:50:01:0427 Info ConfigHelper]         Did not find existing database: BizTalkMsgBoxDb on computer: ABCDEF\BIZTALKDB [2014-05-27
12:50:01:0428 Info BtsCfg] Leaving function: CBtsCfg::ValidateFeature [2014-05-27 12:50:01:0429 Info Configuration Framework]Entering function ValidateSQLCredentials. [2014-05-27 12:50:01:0430 Info Configuration Framework]Leaving function ValidateSQLCredentials.
[2014-05-27 12:50:01:0431 Info BtsCfg] Entering function: CBtsCfg::ValidateFeature [2014-05-27 12:50:01:0433 Info BtsCfg]       Validating feature: WMI [2014-05-27 12:50:01:0433 Info BtsCfg] Entering function:
CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:01:0433 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:01:0437 Info ConfigHelper]         Feature: Engine is installed [2014-05-27
12:50:01:0443 Info ConfigHelper] SQL Server name is: ABCDEF [2014-05-27 12:50:01:0449 Info ConfigHelper]         Validated SQL credentials for user: SSPI on computer: ABCDEF\BIZTALKDB [2014-05-27 12:50:01:0460
Info ConfigHelper]        Executed SQL statement on database: master on computer: ABCDEF\BIZTALKDB [2014-05-27 12:50:01:0465 Info ConfigHelper]         Did not
find existing database: BizTalkDTADb on computer: ABCDEF\BIZTALKDB [2014-05-27 12:50:05:0876 Info Configuration Framework [2014-05-27 12:50:05:0881 Info Configuration Framework]Configuring feature: WMI [2014-05-27 12:50:05:0887 Info BtsCfg] Entering
function: CBtsCfg::ConfigureFeature [2014-05-27 12:50:05:0889 Info BtsCfg]       Configuring feature: WMI [2014-05-27 12:50:05:0890 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:05:0890
Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:05:0891 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:05:0897 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0898 Info BtsCfg]
Leaving function: CWMI::Connect [2014-05-27 12:50:05:0898 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btscfg.cpp(1676): FAILED hr = 8004100e [2014-05-27 12:50:05:0899 Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature [2014-05-27
12:50:05:0900 Info BtsCfg]       Unconfiguring feature: WMI [2014-05-27 12:50:05:0900 Warning BtsCfg] BTS management server or DB names are not found in the registry. [2014-05-27 12:50:05:0901 Info BtsCfg]
Entering function: CWMI::StopHostInstance [2014-05-27 12:50:05:0901 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:05:0905 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0905 Info BtsCfg] Leaving function:
CWMI::Connect [2014-05-27 12:50:05:0906 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1542): FAILED hr = 8004100e [2014-05-27 12:50:05:0906 Error BtsCfg] Invalid namespace [2014-05-27 12:50:05:0907 Info BtsCfg] Entering
function: CWMI::UnMapHost [2014-05-27 12:50:05:0907 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:05:0910 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0911 Info BtsCfg] Leaving function: CWMI::Connect
[2014-05-27 12:50:05:0911 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1691): FAILED hr = 8004100e [2014-05-27 12:50:05:0912 Error BtsCfg] Invalid namespace [2014-05-27
12:50:05:0912 Info BtsCfg] Instantiating IBTSMsgBoxPerformance object [2014-05-27 12:50:06:0008 Info BtsCfg] Calling IBTSMsgBoxPerformance::UninstallArtifacts Exception
in CounterManager.UninstallArtifacts when uninstalling the perf counter instances. The exception details are:  Source of exception: System Message:
Cannot delete Performance Category because this category is not registered or is a system category. Stack trace: at System.Diagnostics.PerformanceCounterCategory.Delete(String
categoryName)   at Microsoft.BizTalk.MsgBoxPerfCounters.MgmtDbAccessEntity.UninstallInstances(Boolean regularUninstall)
at Microsoft.BizTalk.MsgBoxPerfCounters.CounterManager.UninstallArtifacts(Boolean regularUninstall, String logFileName) [2014-05-27 12:50:06:0165 Info BtsCfg] Stopping Tracing [2014-05-27 12:50:06:0165 Info BtsCfg]
Entering function: CWMI::DeleteServer [2014-05-27 12:50:06:0166 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:06:0169 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:06:0170 Info BtsCfg] Leaving function:
CWMI::Connect [2014-05-27 12:50:06:0170 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1341): FAILED hr = 8004100e [2014-05-27 12:50:06:0171 Error BtsCfg] Invalid namespace [2014-05-27 12:50:06:0171 Info BtsCfg] Entering
function: CWMI::UnConfigureGroup [2014-05-27 12:50:06:0171 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:06:0174 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:06:0175 Info BtsCfg] Leaving function: CWMI::Connect
[2014-05-27 12:50:06:0175 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1062): FAILED hr = 8004100e [2014-05-27 12:50:06:0176 Error BtsCfg] Invalid namespace [2014-05-27 12:50:06:0176 Info BtsCfg] Leaving function: CBtsCfg::UnConfigureFeature
[2014-05-27 12:50:06:0177 Info BtsCfg] Leaving function: CBtsCfg::ConfigureFeature [2014-05-27 12:50:06:0177 Warning Configuration Framework]Feature failed to configure: WMI. [2014-05-27 12:50:06:0471 Info Configuration Framework]Configuration Summaries:
[2014-05-27 12:50:06:0472 Error Configuration Framework]Feature: [Group] Failed to configure with error message [Error -2147217394 occurred configuring feature WMI] [2014-05-27 12:50:06:0472 Error Configuration Framework]Feature: [BizTalk Runtime] Failed to
configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.] [2014-05-27 12:50:06:0472 Error Configuration Framework]Feature: [BAM Tools] Failed to configure with error message [Feature is skipped due to
dependent feature (Group) failed to configure correctly.] [2014-05-27 12:50:06:0473 Error Configuration Framework]Feature: [BAM Portal] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-05-27 12:50:06:0473 Info Configuration Framework]   Feature: SSOServer,Engine      Configuration Enabled: yes            Sub UI: no       Configured:
yes [2014-05-27 12:50:06:0473 Info Configuration Framework]   Feature: SSOServer,Engine      Configuration Enabled: no            Sub UI: yes      Configured:
yes [2014-05-27 12:50:06:0474 Info Configuration Framework]   Feature: WMI   Configuration Enabled: yes      Sub UI: no            Configured:
no [2014-05-27 12:50:06:0474 Info Configuration Framework]   Feature: Engine,BTSCfg          Configuration Enabled: no            Sub
UI: no       Configured: no [2014-05-27 12:50:06:0474 Info Configuration Framework]   Feature: RulesEngine   Configuration Enabled: no        Sub UI: no  Configured:
no [2014-05-27 12:50:06:0474 Info Configuration Framework]   Feature: MOT   Configuration Enabled: yes      Sub UI: no           Configured:
no [2014-05-27 12:50:06:0475 Info Configuration Framework]   Feature: BAMTools       Configuration Enabled: no        Sub UI: no  Configured: no [2014-05-27
12:50:06:0475 Info Configuration Framework]   Feature: BAMTools       Configuration Enabled: no        Sub UI: yes Configured: no [2014-05-27 12:50:06:0475 Info
Configuration Framework]   Feature: BAMPortal       Configuration Enabled: no        Sub UI: no  Configured: no [2014-05-27 12:50:06:0476 Info Configuration
Framework]   Feature: MsEDIAS2      Configuration Enabled: no        Sub UI: no Configured: no [2014-05-27 12:50:06:0476 Info Configuration Framework]Leaving function
ConfigureFeatures(). [2014-05-27 12:50:06:0477 Info Configuration Framework]Entering function WizardStep_NextStepChanged. [2014-05-27 12:50:06:0481 Info Configuration Framework]Entering function ConfigWizardResult_Load. [2014-05-27 12:50:06:0492 Info Configuration
Framework]Leaving function ConfigWizardResult_Load. [2014-05-27 12:50:06:0510 Info Configuration Framework]Leaving function WizardStep_NextStepChanged. [2014-05-27 12:50:09:0512 Info Configuration Framework]Displaying information notification to user. Message:
<Exception Message="Error -2147217394 occurred configuring feature WMI" Source="" HelpID="" />

It is the section above the one you highlighted and I reproduce below which IMHO is the root cause
--------------from your post
Configuring feature: WMI [2014-05-27 12:50:05:0890 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:05:0890 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [2014-05-27 12:50:05:0891 Info BtsCfg] Entering
function: CWMI::Connect [2014-05-27 12:50:05:0897 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0898 Info BtsCfg] Leaving function: CWMI::Connect [2014-05-27 12:50:05:0898 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btscfg.cpp(1676):
FAILED hr = 8004100e [2014-05-27 12:50:05:0899 Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature [2014-05-27 12:50:05:0900 Info BtsCfg]       Unconfiguring feature: WMI [2014-05-27 12:50:05:0900
Warning BtsCfg] BTS management server or DB names are not found in the registry. [2014-05-27 12:50:05:0901 Info BtsCfg] Entering function: CWMI::StopHostInstance [2014-05-27 12:50:05:0901 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27
12:50:05:0905 Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0905 Info BtsCfg] Leaving function: CWMI::Connect [2014-05-27 12:50:05:0906 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1542): FAILED hr
= 8004100e [2014-05-27 12:50:05:0906 Error BtsCfg] Invalid namespace [2014-05-27 12:50:05:0907 Info BtsCfg] Entering function: CWMI::UnMapHost [2014-05-27 12:50:05:0907 Info BtsCfg] Entering function: CWMI::Connect [2014-05-27 12:50:05:0910
Error BtsCfg] Error occured in CWMI::Connect [2014-05-27 12:50:05:0911 Info BtsCfg] Leaving function: CWMI::Connect [2014-05-27 12:50:05:0911 Error BtsCfg] d:\bt\9359137\private\source\setup\btscfg\btswmi.cpp(1691): FAILED hr = 8004100e [2014-05-27
12:50:05:0912 Error BtsCfg] Invalid namespace
Can you please verify if as part of server features on Windows Server 2008 R2 you have the following features installed?
SNMP Service
SNMP WMI Provider
Additionally while running the configuration you should be using an account with ELEVATED permissions who should also be a member of the Performance Counter Users local group.
Regards.

Hotfix KB2830546 for BizTalk Server 2013?

This is a question for MS:
I am a bit puzzled by the fact that a BizTalk Server hotfix is all of a sudden rolled out automatically through Windows Update?
Also this hotfix is marked "Important", but reading the description (The verical scroll bar on the target schema....) hardly seems critical to a production environment.
When examining the hotfix:
http://support.microsoft.com/kb/2830546
it seems that there are two additional fixes inside it:
Note This update also resolves the issues that are described in the following Microsoft Knowledge Base (KB) articles:•
2832136
FIX: User cannot perform certain database-related operations in BizTalk Server 2013
2832137
FIX: BAM tools cannot be configured in a multi-node BizTalk Server 2013 environment
Now these seems more critical! Is that the reason that it is pushed automatically? And why are two important updates "hidden" inside a "non-important vertical scroll bar" hotfix?
Can we expect other hotfixes for BizTalk to be pushed automatically in the future? (After all they used to require manual installation from CU's etc., which I found best practice since we then have the ability to install them in a test environment first)?
Morten la Cour

You can decide if you want to have automatic updates for BizTalk or not. BizTalk Server 2013 will release all updates through windows update (optionally you can download these manually). Why it only showed that one element is probably a bug, I'll inform
MS about this topic. But yes, MS have started pushing BizTalk updates through windows update in BizTalk 2013.
Best regards,
Tord

BizTalk 2013 BAM Tools - BAM Alerts Configuration error in Multi Computer Env

Hi,
I am trying to install BizTalk Server in multi-computer environment.
I did install BizTalk Server on primary server smoothly.
On Sencodary Server, I am able to join existing SSO and BizTalk Group.
When I try to configure BAM Tools and BAM Alerts I get an error in BizTalk Log -
2014-02-06 11:12:39:6987 [Info] BAMTools Source:
2014-02-06 11:12:39:6987 [Info] BAMTools System.ServiceProcess
2014-02-06 11:12:39:6987 [Info] BAMTools Error messages:
2014-02-06 11:12:39:6987 [Info] BAMTools
2014-02-06 11:12:39:6987 [Info] BAMTools Service BAMAlerts was not found on computer '.'.
2014-02-06 11:12:39:6997 [Info] BAMTools The specified service does not exist as an installed service
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools Call stack:
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateNames()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_ServiceName()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateStatus()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_Status()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertHostHelper.StopService()
2014-02-06 11:12:39:6997 [Info] BAMTools <BizTalk2009>
02/06/2014 11:12:38 1
Microsoft.BizTalk.Bam.Management.AlertModule2012
UpdateConfig Error
Exception thrown
2014-02-06 11:12:39:6997 [Info] BAMTools Source:
2014-02-06 11:12:39:6997 [Info] BAMTools System.ServiceProcess
2014-02-06 11:12:39:6997 [Info] BAMTools Error messages:
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools Service BAMAlerts was not found on computer '.'.
2014-02-06 11:12:39:6997 [Info] BAMTools The specified service does not exist as an installed service
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools Call stack:
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateNames()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_ServiceName()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateStatus()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_Status()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertHostHelper.StopService()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertModule2012.UpdateConfig(BamConfigurationManager originalConfig, BamConfigurationManager bamConfig)
2014-02-06 11:12:39:6997 [Info] BAMTools <BizTalk2009>
02/06/2014 11:12:38 1
Microsoft.BizTalk.Bam.Management.AlertModule2012
UpdateConfig Exit
2014-02-06 11:12:39:6997 [Info] BAMTools <BizTalk2009>
02/06/2014 11:12:38 1
Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility
Main Error
Exception thrown
2014-02-06 11:12:39:6997 [Info] BAMTools Source:
2014-02-06 11:12:39:6997 [Info] BAMTools System.ServiceProcess
2014-02-06 11:12:39:6997 [Info] BAMTools Error messages:
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools Service BAMAlerts was not found on computer '.'.
2014-02-06 11:12:39:6997 [Info] BAMTools The specified service does not exist as an installed service
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools Call stack:
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateNames()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_ServiceName()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateStatus()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_Status()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertHostHelper.StopService()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertModule2012.UpdateConfig(BamConfigurationManager originalConfig, BamConfigurationManager bamConfig)
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertModule.UpdateConfig()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.BamManager.UpdateConfigurationXml()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleUpdateConfig()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)
2014-02-06 11:12:39:6997 [Info] BAMTools <BizTalk2009>
02/06/2014 11:12:38 1
Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility
Main Exit
2014-02-06 11:12:39:6997 [Info] BAMTools Finished logging tracing of bm.exe execution.
2014-02-06 11:12:39:6997 [Info] BAMTools Deleting File: C:\Users\!gtqk\AppData\Local\Temp\2\6fc65525-7a2d-4c82-aa3a-e776e4e58291-BamManagerTrace.log
2014-02-06 11:12:39:7007 [Info] BAMTools Deleting File: E:\Program Files (x86)\Microsoft BizTalk Server 2013\Tracking\bm.exe.config
2014-02-06 11:12:39:7007 [Error] BAMTools Error configuring
Error executing bm.exe with tracing enabled. (Microsoft.BizTalk.Bam.CfgExtHelper.Utility)
Error executing process: E:\Program Files (x86)\Microsoft BizTalk Server 2013\Tracking\bm.exe (Microsoft.BizTalk.Bam.CfgExtHelper.Utility)
Microsoft (R) Business Activity Monitoring Utility Version 3.10.229.0
Copyright (C) Microsoft Corporation. All rights reserved.
I have made the required changes on the SQL Server - MSTDC, Named Pipes Enabled.
BizTalk Server 1 and BizTalk Server 2 both have required MSDTC settings. Along with this Firewall settings are also modified.
I have followed this link - http://social.technet.microsoft.com/wiki/contents/articles/1888.install-and-configure-bam-business-activity-monitoring-in-a-multi-computer-environment.aspx
which is for BizTalk Server 2010 (provided for BizTalk Server 2013 ?).
Kindly, let me knoe if anyone had similar issue and it has been resolved , or any other pointers
With Regards,
Gopal Talreja

I faced similar problem while installing BAMAlerts on 2nd BizTalk 2013 R2 server in a group. The reason for this error is the Wizard is unable to create the windows service (BAMAlerts) during the configuration. To fix the issue you need to create the service
manually. I had to perform following actions:
1.CREATE SERVICE:
Start command prompt as administrator on the node with problems. Execute (do not use copy paste from email, it often gives error):
sc create BAMAlerts binPath= "C:\Program Files (x86)\Microsoft BizTalk Server 2013\Tracking\BAMAlerts.exe”
2. SET USERNAME and PASSWORD on this Service:
Open services admin console, and change the user and password for the BAMAlerts Service.
- Start the service.
Start again the configuration for the BAM on the node with problems and complete the BAMTools and BAMAlerts configration (do not enter any username and password in the BAMAlerts configuration wizard).
3. RUN SQL Statement:
After starting the Service, BAMAlerts service may stop with following error in the event log:
Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "A-CLS01VISQL1". --->
System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'bam_Metadata_GetProperty', database 'BAMPrimaryImport', schema 'dbo'.
To solve this, run following SQL statement
USE BAMPrimaryImport
GRANT
EXECUTE
ON
bam_Metadata_GetProperty
TO
BAM_ManagementNSReader;
GO
This should solve the problem.
Thanks to Microsoft support engineer for help.
Strange bug and I hope MS will solve this issue in next patch/CU/update

E-Business Suite - BizTalk Server Integrations

Our organization is implementing BizTalk Server 2010 to facilitate communication with an ERP under development in an Oracle E-Business Suite r12.1 “On Demand” environment. Some of the modules being developed in E-Business Suite include Payroll, Advanced Benefits, Human Resources, and AP. We are seeking information from anyone who has done something like this. In particular, we would like to know more about exposing and consuming web services to accomplish this integration. Our IT Department will be able to develop its own web services and BizTalk applications within our own domain, but we do not have experience with Oracle E-Business Suite. We understand that the Integration Repository/SOA Gateway may be used to expose some APIs but not all of them. We also understand there may be security and other issues with Oracle functionality that BizTalk adapters for E-Business Suite would have no knowledge of. To summarize, we need to know: (1) if integration between E-Business Suite and outside systems using web services and/or BizTalk has been achieved by anyone in this forum, and (2) if so, how the integration was achieved.

I think your concern is due to externally hosted EBS so that you need to find a secure way of integrating your applications hosted in your datacenter with it. The key here is to have a relaibale network infrastructure - either have dedicated network lines between your data center and on demand or have some high quality VPN between them. If you have this in place, you can treat EBS as another of your internal apps and apply the same security standards as your other internal apps if it is also supported by ebs.

How to apply hotfix 3000847 to Windows Server 2012 & BizTalk Server 2013 R2

Hi
I have a environment get the same issue as:
http://support.microsoft.com/en-us/kb/3000847. But this hotfix can't be used in my environment.
The environment information:
We are using Windows Server 2012 Standard, BizTalk Server 2013 R2 Enterprise Edition. And the Version of Microsoft Enterprise Single Sign-On is 9.0.2096. It's the same as the article.
Here is the article content:
Prerequisites
To apply this hotfix, you must have Enterprise Single Sign-On V5 (9.0.2096) installed.
Best regards,
Glen Qu (Fareast\v-zuqu)

Have you tried installing it? Are you getting any error?
Ideally you should not face any issue while installing this hotfix.
Pre-requisites-
1) User account should be member BizTalk Server Administrators Group and have SydAdmin privileges on SQL Server
2) Stop all the host instances
3) Stop SQL Agent
4) Stop App Pools if any webservices is posting messages in BizTalk
Please refer the below article Information about BizTalk hotfixes and Cumulative Update support(Uninstall and rollback if required).
http://support.microsoft.com/kb/2003907
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Problem with BizTalk server 2013 SFTP adapter on Cloud VM

All,
We have deployed Microsoft Biztalk Server 2013 Enterprise edition on a cloud VM. We are facing an issue with SFTP adapter to receive. Following are the details;
On this VM, we are facing an issue with BizTalk server 2013 SFTP adapter. The SFTP location can receive and send message through SFTP clients and .Net code. But using BizTalk server 2013 SFTP adapter we are only able to send the file on SFTP location but
could not receive the files from same location.
We are getting just one line error in system event log that is :
Event#7011. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BTSSvc$BizTalkServerApplication service.
Regards,
Shoaib Danish

Hi
BizTalk Server 2013 is available on Windows Azure. BizTalk Server 2013 can be installed locally on your hardware
and in Windows Azure as a virtual machine. Please follow the procedures to check it on your side.
Configuring BizTalk Server 2013 on a Windows Azure VM
Create a BizTalk Virtual Machine in Windows Azure
Create the BizTalk Group Prerequisites
Configure the BizTalk Group
Best regards
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

Hello,
We have a requirement to connect SFTP secure site with the private key and polling files. Initially I have
tested BizTalk Server 2013 SFTP Adapter receiver Port using Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
did not poll any files from SFTP Site. I added only one file to SFTP Server ( 145 kb file) for testing purpose.
However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
I could not find any errors in Event viewer also. I can download\upload file using WinSCP tool .
So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter is also working find
without any issues for Client SFTP Site.
This is the configuration on SFTP Receive Adapter
This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool.
<o:p></o:p>
Appreciate your help on this.<o:p></o:p>
Thanks<o:p></o:p>
PrabathD<o:p></o:p>

BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
Set your poll interval to a non-zero value and check the behavior.
Regards.

BizTalk Server BAM Issue

Similar Messages

Maybe you are looking for